Komatsu WA470-3 Wheel Loader Service Repair Manual (WA470-3 Serial WA470H2005...han647runken
This document is a shop manual for the WA470-3 Wheel Loader that provides instructions on general safety, structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. It outlines 23 general safety precautions to follow when working on the machine, such as wearing protective equipment, using lifting equipment properly, and following tightening torques. The manual is divided into sections for different components and contains technical information, troubleshooting charts, and step-by-step instructions for repairs. Symbols are used to mark important safety information and technical details.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfhan647runken
This document provides specifications and information about a WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, horsepower, torque, and fuel consumption.
- Performance specifications such as operating weight, bucket capacity, travel speeds, and gradeability.
- Hydraulic system details including pump models and cylinder sizes.
- A weight table listing weights of individual machine components.
- A list of recommended lubricants and coolants for the engine, transmission, hydraulics, axles, and other systems.
Komatsu HM400-2 Articulated Dump Truck Parts Catalogue Manual - SN A11001 AND...han647runken
This document provides part descriptions and numbers for engine components of the HM400-2 excavator from serial number A11001 and up. It includes sections for the cylinder head, rocker lever housing, rocker lever lever assembly, and rocker lever shaft assembly. Each section lists the relevant parts, descriptions, and quantities.
Komatsu HM400-1L Articulated Dump Truck Parts Catalogue Manual - SN A10001 AN...han647runken
This document provides parts information for an HM400-1L excavator with serial number range A10001-UP. It includes a list of major systems and components with reference page numbers. An example parts list is then provided for the engine mounting system with part numbers, descriptions, and other specifications.
Komatsu HM350-1L Articulated Dump Truck Parts Catalogue Manual - SN A10001 AN...han647runken
This document provides parts information for the engine and related systems of an HM350-1L machine with serial number A10001 or higher. It includes sections for the engine mounting, hoses, air intake and exhaust piping, air cleaner components, and other engine parts. Lists of part numbers, descriptions, and quantities are provided for each item.
Komatsu WA470-3 Wheel Loader Service Repair Manual (WA470-3 Serial WA470H2005...han647runken
This document is a shop manual for the WA470-3 Wheel Loader that provides instructions on general safety, structure and function, testing and adjusting, disassembly and assembly, and maintenance standards. It outlines 23 general safety precautions to follow when working on the machine, such as wearing protective equipment, using lifting equipment properly, and following tightening torques. The manual is divided into sections for different components and contains technical information, troubleshooting charts, and step-by-step instructions for repairs. Symbols are used to mark important safety information and technical details.
Komatsu WA150PZ-5 Wheel Loader Service Repair Manual (SN H50051 and up).pdfhan647runken
This document provides specifications and information about a WA150PZ-5 wheel loader, including:
- General assembly drawings and dimensions of the machine.
- Engine specifications including model, horsepower, torque, and fuel consumption.
- Performance specifications such as operating weight, bucket capacity, travel speeds, and gradeability.
- Hydraulic system details including pump models and cylinder sizes.
- A weight table listing weights of individual machine components.
- A list of recommended lubricants and coolants for the engine, transmission, hydraulics, axles, and other systems.
Komatsu HM400-2 Articulated Dump Truck Parts Catalogue Manual - SN A11001 AND...han647runken
This document provides part descriptions and numbers for engine components of the HM400-2 excavator from serial number A11001 and up. It includes sections for the cylinder head, rocker lever housing, rocker lever lever assembly, and rocker lever shaft assembly. Each section lists the relevant parts, descriptions, and quantities.
Komatsu HM400-1L Articulated Dump Truck Parts Catalogue Manual - SN A10001 AN...han647runken
This document provides parts information for an HM400-1L excavator with serial number range A10001-UP. It includes a list of major systems and components with reference page numbers. An example parts list is then provided for the engine mounting system with part numbers, descriptions, and other specifications.
Komatsu HM350-1L Articulated Dump Truck Parts Catalogue Manual - SN A10001 AN...han647runken
This document provides parts information for the engine and related systems of an HM350-1L machine with serial number A10001 or higher. It includes sections for the engine mounting, hoses, air intake and exhaust piping, air cleaner components, and other engine parts. Lists of part numbers, descriptions, and quantities are provided for each item.
Komatsu HM350-1 Articulated Dump Truck Parts Catalogue Manual - SN 1001 AND U...han647runken
This document provides parts information for an HM350-1 excavator with serial numbers 1001 and up. It includes a list of major systems and subsystems for the excavator. For each part listed, it provides the part number, name, quantity, and applicable serial number range. The document contains detailed parts listings for various engine and cooling system components.
Komatsu HM300-3 Articulated Dump Truck Parts Catalogue Manual - SN 3001 AND U...han647runken
This document provides parts information for an HM300-3 excavator with serial numbers 3001 and up. It includes sections for the engine, cooling system, fuel system, electrical system, and other components. The cooling system section lists units for the radiator, aftercooler, coolant piping, brake oil cooler, and brake oil cooler piping. Parts are identified by index number, part number, description, and quantity for each component. The document provides an exploded diagram and parts list for each assembly.
Komatsu HM300-2 Articulated Dump Truck Parts Catalogue Manual - SN 2001-2784.pdfhan647runken
This document contains parts lists and specifications for various engine and drivetrain components of an HM300-2 excavator with serial number 2001-2784. It includes 17 sections with details on the engine mounting, hoses, piping, air conditioning parts, damper, and other related systems. The document provides part numbers, names, quantities and serial number ranges for each component listed.
Komatsu HM300-1L Articulated Dump Truck Parts Catalogue Manual - SN A10001 AN...han647runken
This document provides parts information for an HM300-1L machine with serial number range A10001-UP. It includes a list of major system sections and references to more detailed parts pages for items like the engine mounting, hoses, piping, harness, damper, air cleaner, and other engine components. Parts are identified by number, description, and quantity.
Komatsu D155C-1 Pipe Layer Parts Catalogue Manual - SN 15686 AND UP.pdfhan647runken
This document provides parts information for a D155C-1 excavator with a SA6D140-2 engine installed. It includes lists of parts for the engine and its related systems, including the cooling system, fuel tank and piping, and electrical system. The parts are organized by section and item number, and each part includes its number, name, quantity, and applicable serial number range.
Deutz Fahr AGROTRON 265 Tractor Service Repair Manual.pdfhan647runken
This workshop manual provides safety instructions for working on Agrotron tractors. It stresses the importance of following prescribed repair procedures using the proper tools. Personal safety should always take priority over work tasks. Specific safety precautions are outlined for different repair operations like removing and refitting parts, working with batteries and electrical systems, and using lifting equipment. Proper protective equipment and ventilation are required, and precautions are described to prevent injury from moving parts, hot surfaces, chemicals, and other hazards.
Deutz Fahr AGROTRON 235 Tractor Service Repair Manual.pdfhan647runken
This workshop manual provides safety instructions for working on Agrotron tractors. It stresses the importance of following prescribed repair procedures using the proper tools. Personal safety should always take priority, and potentially dangerous work should involve two people. Specific safety precautions are outlined for different repair tasks, including wearing protective equipment, lifting heavy components safely, and working with high-pressure systems and batteries. Proper techniques like using support stands and following torque specifications are emphasized to prevent injury and ensure correct reassembly.
Deutz Fahr AGROTRON 210 Tractor Service Repair Manual.pdfhan647runken
This workshop manual provides safety instructions for working on Agrotron tractors. It stresses the importance of following prescribed repair procedures using the proper tools. Personal safety should always take priority, and potentially dangerous work should involve two people. Specific safety precautions are outlined for different repair tasks, including wearing protective equipment, lifting heavy components safely, and working with high-pressure systems and batteries. Proper techniques like using support stands and following torque specifications are emphasized to prevent injury and ensure correct reassembly.
Deutz Fahr AGROFARM 100 Tractor Service Repair Manual.pdfhan647runken
This document provides the table of contents for a workshop manual for Agrofarm 85 and Agrofarm 100 tractors. The manual covers technical specifications, calibrations and electronic diagnosis, maintenance and repair methods, and wiring diagrams. It includes sections on the engine, transmission, axles, hydraulics, bodywork and more. The table of contents lists over 30 sections and subsections that provide information, part numbers, and instructions for repair and maintenance of components.
Deutz Fahr AGROFARM 85 Tractor Service Repair Manual.pdfhan647runken
This document provides the table of contents for a workshop manual for Agrofarm 85 and Agrofarm 100 tractors. The manual covers technical specifications, calibrations and electronic diagnosis, maintenance and repair methods, and wiring diagrams. It includes sections on the engine, transmission, axles, hydraulics, bodywork and more. The table of contents lists over 30 sections and subsections that provide information, part numbers, and instructions for repair and maintenance of components.
Caterpillar Cat EL300B EXCAVATOR (Prefix 3FJ) Service Repair Manual (3FJ00001...han647runken
The document provides instructions for assembling and disassembling components of the fuel injection system for a Caterpillar 3306B diesel engine, including:
1) Disassembling the fuel injection pump housing by removing internal components like the camshaft, lifters, and bearings.
2) Assembling the fuel injection pump housing by installing bearings, camshaft, and other internal components while applying clean engine oil as a lubricant.
3) Tools required for tasks like installing and removing snap rings from the housing.
The document provides instructions for removing and installing fuel system components on a Caterpillar 3306 engine. It describes removing the fuel priming pump by disconnecting tubes, removing bolts, and separating parts. It also details removing the fuel filter base by disconnecting lines, removing bolts and separating parts. Finally, it explains removing the fuel transfer pump by disconnecting tubes and removing bolts to separate the pump from the engine.
Caterpillar Cat EL240C EXCAVATOR (Prefix 9PK) Service Repair Manual (9PK00001...han647runken
This document provides instructions for removing and installing an inlet manifold on an excavator model EL240C. It describes:
- Removing the valve mechanism cover, disconnecting piping and solenoids, and removing bolts and elbows to detach the inlet manifold.
- Installing a new gasket, positioning the inlet manifold, tightening bolts, and reconnecting piping and solenoids to attach the new inlet manifold.
- Safety notices to keep parts clean and contain fluids, as well as proper disposal of fluids.
This document provides instructions for removing and installing the flywheel housing on an E240C excavator. The removal procedure involves using lifting brackets to remove the flywheel housing which weighs approximately 25 kg. The installation procedure specifies applying a gasket sealant to the mounting face before reinstalling the flywheel housing with bolts.
This document provides instructions for removing and installing the fuel transfer pump on an excavator. The removal procedure involves holding the spring-loaded cover in place and removing bolts to access internal components like the spring, piston, seals and fittings. The installation procedure specifies cleaning and inspecting components before reassembling them in reverse order. Proper containment of fluids is emphasized to prevent contamination.
Caterpillar Cat E70 EXCAVATOR (Prefix 3BG) Service Repair Manual (3BG00001-UP...han647runken
This document provides instructions for installing Duo-Cone seals correctly to reduce leaks or failures. It describes the components of a Duo-Cone seal and the assembly process. Critical items include cleaning and inspecting the seal ring, rubber toric, and housing to ensure they are free of contamination or damage before installation. The seal ring face, taper band, and housing retainer lip should be carefully inspected.
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, removing the fuel transfer pump, and disassembling the fuel transfer pump on a Caterpillar D5B track-type tractor with a 3306 engine. The procedures describe draining fuel, removing bolts and connections, installing replacement parts and gaskets, and reconnecting fuel lines. Safety notices are provided to keep parts clean and contain fluids during maintenance.
Caterpillar Cat D4E TRACK-TYPE TRACTOR (Prefix 77W) Service Repair Manual.pdfhan647runken
The document provides instructions for removing and installing a fuel filter base on a Caterpillar 3304B or 3306B engine. The removal procedure involves using a strap wrench to remove the fuel filter, disconnecting the fuel line from the fuel filter base, and removing two bolts and the fuel filter base from the fuel injection pump housing. The installation procedure instructs to install the fuel filter base with a new gasket if needed, connect the fuel line, and secure with two bolts. Proper cleanliness is emphasized when handling components.
Caterpillar Cat D4E TRACK TRACTOR Service Repair Manual (77W01664 and UP).pdfhan647runken
This document provides instructions for removing and installing an alternator, fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar D4E track-type tractor with a 3304 engine. The alternator disassembly procedure involves removing components like the pulley, fan, bearings, and stator. The assembly procedure describes cleaning and reinstalling these parts. Instructions are also given for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump, which involve disconnecting fuel lines and removing mounting bolts.
Komatsu HM350-1 Articulated Dump Truck Parts Catalogue Manual - SN 1001 AND U...han647runken
This document provides parts information for an HM350-1 excavator with serial numbers 1001 and up. It includes a list of major systems and subsystems for the excavator. For each part listed, it provides the part number, name, quantity, and applicable serial number range. The document contains detailed parts listings for various engine and cooling system components.
Komatsu HM300-3 Articulated Dump Truck Parts Catalogue Manual - SN 3001 AND U...han647runken
This document provides parts information for an HM300-3 excavator with serial numbers 3001 and up. It includes sections for the engine, cooling system, fuel system, electrical system, and other components. The cooling system section lists units for the radiator, aftercooler, coolant piping, brake oil cooler, and brake oil cooler piping. Parts are identified by index number, part number, description, and quantity for each component. The document provides an exploded diagram and parts list for each assembly.
Komatsu HM300-2 Articulated Dump Truck Parts Catalogue Manual - SN 2001-2784.pdfhan647runken
This document contains parts lists and specifications for various engine and drivetrain components of an HM300-2 excavator with serial number 2001-2784. It includes 17 sections with details on the engine mounting, hoses, piping, air conditioning parts, damper, and other related systems. The document provides part numbers, names, quantities and serial number ranges for each component listed.
Komatsu HM300-1L Articulated Dump Truck Parts Catalogue Manual - SN A10001 AN...han647runken
This document provides parts information for an HM300-1L machine with serial number range A10001-UP. It includes a list of major system sections and references to more detailed parts pages for items like the engine mounting, hoses, piping, harness, damper, air cleaner, and other engine components. Parts are identified by number, description, and quantity.
Komatsu D155C-1 Pipe Layer Parts Catalogue Manual - SN 15686 AND UP.pdfhan647runken
This document provides parts information for a D155C-1 excavator with a SA6D140-2 engine installed. It includes lists of parts for the engine and its related systems, including the cooling system, fuel tank and piping, and electrical system. The parts are organized by section and item number, and each part includes its number, name, quantity, and applicable serial number range.
Deutz Fahr AGROTRON 265 Tractor Service Repair Manual.pdfhan647runken
This workshop manual provides safety instructions for working on Agrotron tractors. It stresses the importance of following prescribed repair procedures using the proper tools. Personal safety should always take priority over work tasks. Specific safety precautions are outlined for different repair operations like removing and refitting parts, working with batteries and electrical systems, and using lifting equipment. Proper protective equipment and ventilation are required, and precautions are described to prevent injury from moving parts, hot surfaces, chemicals, and other hazards.
Deutz Fahr AGROTRON 235 Tractor Service Repair Manual.pdfhan647runken
This workshop manual provides safety instructions for working on Agrotron tractors. It stresses the importance of following prescribed repair procedures using the proper tools. Personal safety should always take priority, and potentially dangerous work should involve two people. Specific safety precautions are outlined for different repair tasks, including wearing protective equipment, lifting heavy components safely, and working with high-pressure systems and batteries. Proper techniques like using support stands and following torque specifications are emphasized to prevent injury and ensure correct reassembly.
Deutz Fahr AGROTRON 210 Tractor Service Repair Manual.pdfhan647runken
This workshop manual provides safety instructions for working on Agrotron tractors. It stresses the importance of following prescribed repair procedures using the proper tools. Personal safety should always take priority, and potentially dangerous work should involve two people. Specific safety precautions are outlined for different repair tasks, including wearing protective equipment, lifting heavy components safely, and working with high-pressure systems and batteries. Proper techniques like using support stands and following torque specifications are emphasized to prevent injury and ensure correct reassembly.
Deutz Fahr AGROFARM 100 Tractor Service Repair Manual.pdfhan647runken
This document provides the table of contents for a workshop manual for Agrofarm 85 and Agrofarm 100 tractors. The manual covers technical specifications, calibrations and electronic diagnosis, maintenance and repair methods, and wiring diagrams. It includes sections on the engine, transmission, axles, hydraulics, bodywork and more. The table of contents lists over 30 sections and subsections that provide information, part numbers, and instructions for repair and maintenance of components.
Deutz Fahr AGROFARM 85 Tractor Service Repair Manual.pdfhan647runken
This document provides the table of contents for a workshop manual for Agrofarm 85 and Agrofarm 100 tractors. The manual covers technical specifications, calibrations and electronic diagnosis, maintenance and repair methods, and wiring diagrams. It includes sections on the engine, transmission, axles, hydraulics, bodywork and more. The table of contents lists over 30 sections and subsections that provide information, part numbers, and instructions for repair and maintenance of components.
Caterpillar Cat EL300B EXCAVATOR (Prefix 3FJ) Service Repair Manual (3FJ00001...han647runken
The document provides instructions for assembling and disassembling components of the fuel injection system for a Caterpillar 3306B diesel engine, including:
1) Disassembling the fuel injection pump housing by removing internal components like the camshaft, lifters, and bearings.
2) Assembling the fuel injection pump housing by installing bearings, camshaft, and other internal components while applying clean engine oil as a lubricant.
3) Tools required for tasks like installing and removing snap rings from the housing.
The document provides instructions for removing and installing fuel system components on a Caterpillar 3306 engine. It describes removing the fuel priming pump by disconnecting tubes, removing bolts, and separating parts. It also details removing the fuel filter base by disconnecting lines, removing bolts and separating parts. Finally, it explains removing the fuel transfer pump by disconnecting tubes and removing bolts to separate the pump from the engine.
Caterpillar Cat EL240C EXCAVATOR (Prefix 9PK) Service Repair Manual (9PK00001...han647runken
This document provides instructions for removing and installing an inlet manifold on an excavator model EL240C. It describes:
- Removing the valve mechanism cover, disconnecting piping and solenoids, and removing bolts and elbows to detach the inlet manifold.
- Installing a new gasket, positioning the inlet manifold, tightening bolts, and reconnecting piping and solenoids to attach the new inlet manifold.
- Safety notices to keep parts clean and contain fluids, as well as proper disposal of fluids.
This document provides instructions for removing and installing the flywheel housing on an E240C excavator. The removal procedure involves using lifting brackets to remove the flywheel housing which weighs approximately 25 kg. The installation procedure specifies applying a gasket sealant to the mounting face before reinstalling the flywheel housing with bolts.
This document provides instructions for removing and installing the fuel transfer pump on an excavator. The removal procedure involves holding the spring-loaded cover in place and removing bolts to access internal components like the spring, piston, seals and fittings. The installation procedure specifies cleaning and inspecting components before reassembling them in reverse order. Proper containment of fluids is emphasized to prevent contamination.
Caterpillar Cat E70 EXCAVATOR (Prefix 3BG) Service Repair Manual (3BG00001-UP...han647runken
This document provides instructions for installing Duo-Cone seals correctly to reduce leaks or failures. It describes the components of a Duo-Cone seal and the assembly process. Critical items include cleaning and inspecting the seal ring, rubber toric, and housing to ensure they are free of contamination or damage before installation. The seal ring face, taper band, and housing retainer lip should be carefully inspected.
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, removing the fuel transfer pump, and disassembling the fuel transfer pump on a Caterpillar D5B track-type tractor with a 3306 engine. The procedures describe draining fuel, removing bolts and connections, installing replacement parts and gaskets, and reconnecting fuel lines. Safety notices are provided to keep parts clean and contain fluids during maintenance.
Caterpillar Cat D4E TRACK-TYPE TRACTOR (Prefix 77W) Service Repair Manual.pdfhan647runken
The document provides instructions for removing and installing a fuel filter base on a Caterpillar 3304B or 3306B engine. The removal procedure involves using a strap wrench to remove the fuel filter, disconnecting the fuel line from the fuel filter base, and removing two bolts and the fuel filter base from the fuel injection pump housing. The installation procedure instructs to install the fuel filter base with a new gasket if needed, connect the fuel line, and secure with two bolts. Proper cleanliness is emphasized when handling components.
Caterpillar Cat D4E TRACK TRACTOR Service Repair Manual (77W01664 and UP).pdfhan647runken
This document provides instructions for removing and installing an alternator, fuel priming pump, fuel filter base, and fuel transfer pump on a Caterpillar D4E track-type tractor with a 3304 engine. The alternator disassembly procedure involves removing components like the pulley, fan, bearings, and stator. The assembly procedure describes cleaning and reinstalling these parts. Instructions are also given for removing and installing the fuel priming pump, fuel filter base, and fuel transfer pump, which involve disconnecting fuel lines and removing mounting bolts.
Caterpillar Cat D4E TRACK TRACTOR Service Repair Manual (77W01664 and UP).pdf
Komatsu HM350-2 Articulated Dump Truck Parts Catalogue Manual - SN 2001 AND UP.pdf
1. HM350-2 S/N 2001-UP (ecot3)
HM350-2 S/N 2001-UP (ecot3)
Reference: Page:|000000
Item Part Name
SAA6D140E-5E-01 S/N 530001-UP
B0 ENGINE RELATED PARTS
C0 COOLING SYSTEM
D0 FUEL TANK AND RELATED PARTS
E0 ELECTRICAL SYSTEM
F0 POWER TRAIN
H0 HYDRAULIC SYSTEM
J0 MAIN FRAME AND RELATED PARTS
K0 OPERATOR'S COMPARTMENT AND CONTROL SYSTEM
M0 GUARD
S0 RIM AND TIRE
T0 BODY
U0 MARKS AND PLATES
V0 TOOL
W0 MISCELLANEOUS
Y0 SERVICE KIT AND COMPONENT PARTS
2. HM350-2 S/N 2001-UP (ecot3)
ENGINE RELATED PARTS
Reference: Page:030000
Item Part Name Qty
10 ENGINE MOUNTING 1
20 ENGINE HOSE 1
30 ENGINE PIPING (EXHAUST) 1
40 ENGINE PIPING (AIR INTAKE) 1
50 AIR CONDITIONER AND HEATER (HEATER PIPING) 1
60 AIR CONDITIONER AND HEATER (AIR COMPRESSOR AND RELATED PARTS)(#2001-2177) 1
70 AIR CONDITIONER AND HEATER (AIR COMPRESSOR AND RELATED PARTS)(#2178-) 1
80 AIR CONDITIONER AND HEATER (AIR COMPRESSOR AND RELATED PARTS) (FOR EU SAFETY
REGULATION)(#2219-)
1
90 DAMPER(#2001-2143) 1
100 DAMPER(#2144-) 1
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
29. HM350-2 S/N 2001-UP (ecot3)
FUEL TANK AND RELATED PARTS
Reference: Page:090000
Item Part Name Qty
10 FUEL TANK AND RELATED PARTS 1
20 FUEL TANK SUB ASS'Y (FUEL TANK AND RELATED PARTS)(#2001-2216) 1
30 FUEL TANK SUB ASS'Y (FUEL TANK AND RELATED PARTS)(#2217-) 1
40 FUEL TANK SUB ASS'Y (FUEL TANK AND RELATED PARTS) (FOR QUICK CHARGE)(#2001-2216) 1
50 FUEL TANK SUB ASS'Y (FUEL TANK AND RELATED PARTS) (FOR QUICK CHARGE)(#2217-) 1
60 FUEL TANK SUB ASS'Y (FUEL TANK AND RELATED PARTS) (SAND PROTECTION SPEC.)(#2001-2216) 1
70 FUEL TANK SUB ASS'Y (FUEL TANK AND RELATED PARTS) (SAND PROTECTION SPEC.)(#2217-) 1
80 FUEL TANK SUB ASS'Y (AIR CLEANER AND PIPING) 1
90 FUEL TANK SUB ASS'Y (AIR CLEANER AND PIPING) (FOR QUICK CHARGE) 1
100 FUEL TANK SUB ASS'Y (QUICK CHARGE RELATED PARTS) 1
110 FUEL TANK SUB ASS'Y (HAND RAIL AND BOX) 1
120 AIR CLEANER (INNER PARTS) 1
130 FUEL LINE(#2001-2206) 1
140 FUEL LINE(#2207-) 1
150 FUEL TANK BREATHER 1
30. HM350-2 S/N 2001-UP (ecot3)
00065991
Ref. D0100-01A0 Page 090010
1
2
3
4
5
6
7
8
8
8
8
HM350-2 S/N 2001-UP (ecot3)
FUEL TANK AND RELATED PARTS
Reference:D0100-01A0 Page:090010
Item Part No. Part Name Qty Serial No.
1 566-04-13270 COVER 1 2001-
2 01010-81020 BOLT 2 2001-
3 01643-31032 WASHER 2 2001-
4 01010-81650 BOLT 5 2001-
5 01643-31645 WASHER 5 2001-
6 01010-81640 BOLT 4 2001-
7 01643-31645 WASHER 4 2001-
8 56B-54-21860 PLATE 16 2075-