This document provides information on the KOBRA 270 TS HS-6 touch screen shredder made by ELCOMAN S.R.L. It can shred up to 5 sheets of paper at a time in cross cut strips that are 0.8x5 mm. The shredder has a touch screen control panel and features that optimize performance like automatic reverse and power saving modes. It also has options for an automatic oiler and metal detection system to protect the cutting knives.

1. Touch Screen Shredders Manufacturer: ELCOMAN S.R.L.
Brand: KOBRA
“Touch Screen” ENERGY Model: KOBRA 270 TS HS-6
Article code:
SMART High Security shredder Kobra 270 TS HS-6: 99.855E/S
Kobra 270 TS HS-6 + Automatic Oiler 99.855E/S +58475
Kobra 270 TS HS-6 + Metal detector 99.855E/S +58485
Kobra 270 TS HS-6 + Metal detector + Automatic Oiler 99.855E/S +58495
KOBRA 270 TS HS-6
Throat width: 270 mm
Security Level DIN 32757: 6
Shred size: 0,8x5 mm. cross cut
Sheet capacity (A4/70 gr. paper)*: 4/5
“ENERGY SMART” system yes
Speed: 0,08 m./sec.
Noise level (idle/shredding): 54/55 dba
Voltage: 230 Volt
Power: 460 Watt
Waste bag volume: 110 liters
Dimensions (WxDxH): 53x43x88 cm.
Weight: 47 Kg.
High security “Touch Screen” Office shredder
• Suitable to shred “Classified” and “Top secret” documents
• Shreds up to 5 sheets of paper (A4 70 gr.) at a time (cross cut rated capacity with lubricated cutting knives)
• Touch Screen Panel
• “EPC - Electronic Power Control“ System: shows the shredding load required to optimise shredding without jams
• “ENERGY SMART®” power saving system: machine goes into power saving stand-by mode after just 8
seconds and switches off automatically after 4 hours of non-operation
• “AUTOMATIC REVERSE” System in case of jamming
• 24 hour continuous duty motors: no duty cycle or timed cool down periods
• Heavy duty chain drive with steel gears “SUPER POTENTIAL POWER UNIT”
• Carbon hardened cutting knives unaffected by staples and metal clips
• New high precision design of cutting knives allows high shred loads with low power consumption
• “AUTOMATIC OILING SYSTEM”: automatically lubricates cutting knives (optional)
• “SHRED GUARD”– Metal Detection System: detects any type of metal which can be introduced into the
shredder and stops immediately the machine preventing any possible damage to the cutting system; an
illuminated optical indicator warns the operator of the presence of the metal (optional)
Touch Screen Panel “AUTOMATIC REVERSE” System “SHRED GUARD” - Metal Detection System
Just touch the controls to activate the machine Special system which detects the thickness of Warns when metal objects of any size are
functions. Keep your finger on the “Forward” the paper entering the shredder and accidentally inserted into the entry opening and
control for 5 seconds and the machine functions automatically rejects the excess material. stops the machine before they reach the cutting
continuously for 30 seconds when transparent knives in order to protect the knives (optional).
material needs to be shredded. A light comes on “AUTOMATIC OILER”
when the blades need to be oiled. Built-in Automatic Oiling system. Eliminates the
need for manual oiling of cutting knives.
* Capacity may vary on power supply, paper quality and lubrication of cutting knives MADE IN ITALY