This document provides specifications and layout diagrams for the components of a wheel loader. It includes:
- Specifications for dimensions, weights, engine details, speeds, and more.
- Overview diagrams showing the layout of main components such as the bucket, cylinders, lights, engine, and more.
- Detailed diagrams labeling locations of the engine, radiator, filters, tanks, valves, pumps, axles, and other parts.
- An overview of the electric system components around the cab, hydraulic oil tank, fuel tank, and engine.
- Sections providing further details on component specifications, systems, and operations.
The document contains detailed technical information, diagrams, and specifications for
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
2. 93211-00581
November 2012
85Z7
SHOP MANUAL (Function & Structure)
INTRODUCTION........................................................................................................................... IN-01~02
Symbol and Abbreviation...............................................................................................................SY-1~2
SECTION 1 GENERAL
Group 1 Specifications ..........................................................................................................T1-1-1
Group 2 Component Layout..................................................................................................T1-2-1
Group 3 Component Specifications ......................................................................................T1-3-1
SECTION 2 SYSTEM
Group 1 Controller.................................................................................................................T2-1-1
Group 2 Control System........................................................................................................T2-2-1
Group 3 ECM System ...........................................................................................................T2-3-1
Group 4 Hydraulic System ....................................................................................................T2-4-1
Group 5 Electrical System.....................................................................................................T2-5-1
SECTION 3 COMPONENT OPERATION
Group 1 Pump Device...........................................................................................................T3-1-1
Group 2 Control Valve...........................................................................................................T3-2-1
Group 3 Cooling Fan System................................................................................................T3-3-1
Group 4 Steering Pilot Valve .................................................................................................T3-4-1
Group 5 Steering Valve .........................................................................................................T3-5-1
Group 6 Pilot Valve................................................................................................................T3-6-1
Group 7 Charging Circuit ......................................................................................................T3-7-1
Group 8 Drive Unit.................................................................................................................T3-8-1
Group 9 Axle .........................................................................................................................T3-9-1
Group 10 Brake Valve ...........................................................................................................T3-10-1
Group 11 Others....................................................................................................................T3-11-1
All information, illustrations and specifications in this manual are based on the latest product information available at the
time of publication. The right is reserved to make changes at any time without notice.
3. 93211-00590
March 2012
85Z7
SHOP MANUAL
(Operational Performance Test & Troubleshooting)
INTRODUCTION........................................................................................................................... IN-01~02
Symbol and Abbreviation...............................................................................................................SY-1~2
SECTION 4 OPERATIONAL PERFORMANCE TEST
Group 1 Introduction .............................................................................................................T4-1-1
Group 2 Standard..................................................................................................................T4-2-1
Group 3 Engine Test..............................................................................................................T4-3-1
Group 4 Machine Performance Test .....................................................................................T4-4-1
Group 5 Component Test......................................................................................................T4-5-1
Group 6 Adjustment ..............................................................................................................T4-6-1
SECTION 5 TROUBLESHOOTING
Group 1 Diagnosing Procedure ............................................................................................T5-1-1
Group 2 Monitor ....................................................................................................................T5-2-1
Group 4 Component Layout..................................................................................................T5-4-1
Group 5 Troubleshooting A ...................................................................................................T5-5-1
Group 6 Troubleshooting B...................................................................................................T5-6-1
Group 7 Air Conditioner ........................................................................................................T5-7-1
All information, illustrations and specifications in this manual are based on the latest product information available at the
time of publication. The right is reserved to make changes at any time without notice.
4. INTRODUCTION
IN-01
To The Reader
Additional References
Manual Composition
Page Number
This manual is written for trained and skilled technicians
to provide technical information needed to maintain and
repair this machine.
y Be sure to thoroughly read this manual for correct
product information and service procedures.
Please refer to the other materials (Operation and
Maintenance Manual, parts catalog, engine technical
material and Kawasaki Shop Manual, etc.) in addition to
this manual.
This manual consists the Technical Manual, the Workshop
Manual and the Engine Manual.
y Information included in the Technical Manual:
Technical information needed for machine pre-delivery
and delivery, operation and activation of all devices
and systems, operational performance tests, and
troubleshooting procedures.
Each page has a number, located on the center lower part
of the page, and each number contains the following
information:
Example:
y Technical Manual: T 1-3-5
T Technical Manual
1 Section Number
3 Group Number
5 Consecutive Page Number for Each Group
y If you have any questions or comments, at if you found
any errors regarding the contents of this manual,
please contact using“Service Manual Revision Request
Form”at the end of this manual. (Note: Do not tear off
the form. Copy it for usage.):
y Information included in the Workshop Manual:
Technical information needed for maintenance and
repair of the machine, tools and devices needed for
maintenance and repair, maintenance standards, and
removal / installation and assembly / disassembly
procedures.
y Information included in the Engine Manual:
Technical information needed for machine pre-delivery
and delivery and maintenance and repair of the engine,
operation and activation of all devices and systems,
troubleshooting and assembly / disassembly procedures.
y Workshop Manual: W 1-3-2-5
W Workshop Manual
1 Section Number
3 Group Number
2 Sub Group Number
5 Consecutive Page Number for Each Group
5. INTRODUCTION
IN-02
Safety Alert Symbol and Headline Notations
In this manual, the following safety alert symbol and
signal words are used to alert the reader to the potential
for personal injury or machine damage.
This is the safety alert symbol. When you see this
symbol, be alert to the potential for personal injury.
Never fail to follow the safety instructions prescribed
along with the safety alert symbol.
The safety alert symbol is also used to draw attention to
component/part weights.
To avoid injury and damage, be sure to use appropriate
lifting techniques and equipment when lifting heavy
parts.
CAUTION:
Indicated potentially hazardous situation which could, if
not avoided, result in personal injury or death.
IMPORTANT:
Indicates a situation which, if not conformed to the
instructions, could result in damage to the machine.
NOTE:
Indicates supplementary technical information.
Units Used
Quantity To Convert From Into Multiply By
Length mm in 0.03937
mm ft 0.003281
Volume L US gal 0.2642
L US qt 1.057
m3
yd3
1.308
Weight kg lb 2.205
Force N kgf 0.10197
N lbf 0.2248
Torque N·m kgf·m 0.10197
Pressure MPa kgf/cm2
10.197
MPa psi 145.0
Power kW PS 1.360
kW HP 1.341
Temperature °C °F °C×1.8+32
Velocity km/h mph 0.6214
min-1
rpm 1.0
Flow rate L/min US gpm 0.2642
mL/rev cc/rev 1.0
NOTE: The numerical value in this manual might be
different from the above-mentioned table.
SI Units (International System of Units) are used in this
manual. MKSA (Meter, Kirogram, Second, Ampere) system
units and English units are also indicated in parentheses
just behind SI units.
Example: 24.5 MPa (250 kgf/cm2
, 3560 psi)
A table for conversion from SI units to other system units
is shown below for reference purposes.
6. Symbol and Abbreviation
SY-1
Symbol and Abbreviation
Symbol /
Abbreviation
Name Explanation
TO Technical manual (Operational principle) Technical manual (Operational Principle).
TT Technical manual (Troubleshooting) Technical manual (Troubleshooting).
W, W/M Workshop manual Workshop manual (Removal and Installation, Disassembly
and Assembly).
MC Main Controller Main controller. MC controls the engine, pump, and valve
according to the machine operating condition.
ECM Engine Control Module Engine controller. ECM controls fuel injection amount
according to the machine operating condition.
VGS Variable Geometry System controller Variable turbo controller. VGS is an exhaust turbo charged
system to supercharge the exhaust energy while running
the engine at slow idle speed. VGS optimizes the turbine
rotation, improves the performance at slow-speed torque
and the acceleration, reduces fuel consumption, and reduces
particulate matter (PM) by adjusting the nozzle opening of
turbine housing.
TCU Transmission Control Unit Transmission control unit. TCU control transmission
according to the machine operating condition.
GSM Global System for Mobile communications
controller
Communication controller. GSM is a type of wireless
communication system, is used in more than on 100
countries around Europe and Asia, and becomes the factual
global standards of the mobile telephone.
GPS Global Positioning System Global positioning system.
CAN Controller Area Network CAN communication. CAN is a serial communications
protocol internationally-standardized by ISO (International
Organization for Standardization).
A/C Air Conditioner Air conditioner.
OPT Option Optional component.
MPDr. Maintenance Pro Dr. MPDr. is software that troubleshooting, monitoring, and
adjustment.
A/I Auto-Idle Auto-idle.
WU Warming-Up Warming-up.
Li Low (Slow) Idle Slow idle engine speed.
ATT Attachment Attachment.
7. Symbol and Abbreviation
SY-2
Symbol /
Abbreviation
Name Explanation
DPF Diesel Particulate Filter DPF is a filter which removes particulate matter (PM)
including the toxic substance of exhaust gas of the diesel
engine. Exhaust particulate removal equipment.
DPD Diesel Particulate Diffuser DPD is an exhaust emission control system, a type of DPF,
which cleans up particulate matter (PM) of diesel engine
exhaust gas. DPD is a ceramic filter which traps and filters
PM of exhaust gas. DPD burns up accumulated PM when PM
increases and regenerates the filter.
DOC Diesel Oxidation Catalyst Oxidation catalyst for the diesel engine. Diesel oxidation
catalyst oxidizes unburnt fuel and raises exhaust
temperature.
CSF Catalyzed Soot Filter Filter. The filter traps, burns, and remove particulate matter
(PM) by using high-temperature-exhaust gas with diesel
oxidation catalyst. Catalyst is applied onto the filter. This
advances PM burning.
PM Particulate Matter Particulate matter.
EGR Exhaust Gas Recirculation The EGR control re-circulates a part of exhaust gas in the
intake manifold and combines it with intake-air. Therefore,
combustion temperature is lowered and generation of oxide
of nitrogen (NOx) is controlled.
8. 85Z7 FS
SECTION 1
GENERAL
―CONTENTS―
Group 1 Specifications
Specifications ...........................................T1-1-1
Group 2 Component Layout
Main Component (Overview) ....................T1-2-1
Main Component ......................................T1-2-2
Electric Component Layout (Overview) .....T1-2-4
Electrical System (Cab) ............................T1-2-5
Electrical System
(Around Hydraulic Oil Tank)................. T1-2-11
Electrical System (Around Fuel Tank) .....T1-2-12
Engine and Fan Pump............................T1-2-13
Hydraulic Pump......................................T1-2-15
Transmission and Torque Converter
Assembly ............................................T1-2-15
Loading Control Valve ............................T1-2-16
Manifold Valve........................................T1-2-17
Brake Charge Valve................................T1-2-17
Parking Brake Solenoid Valve.................T1-2-17
3-Spool Solenoid Valve Unit....................T1-2-17
Steering Valve ........................................T1-2-18
Flow Regualtor Valve..............................T1-2-18
Secondary Steering Pump ......................T1-2-18
Group 3 Component Specifications
Engine ..................................................... T1-3-1
Engine Accessories ................................. T1-3-5
Hydraulic Component .............................. T1-3-7
Electrical Component............................. T1-3-12
9. T1-1-1
Group 1 Specifications
SECTION 1 GENERAL
Specifications
Bucket Capacity: heaped m3
(Y3
) 3.7 (4.8)
Operating Weight kg (lbs) 20670 (45560)
Tipping Load (Full Turn) kg (lbs) 16140 (35590)
Engine - ISUZU 6HK1 Diesel
A: Overall Length mm (in) 8460 (333)
B: Overall Width (Bucket) mm (in) 3100 (122)
C: Overall Height mm (in) 3460 (136)
D: Wheel Base mm (in) 3350 (132)
E: Tread (front and rear tires) mm (in) 2260 (89)
F: Ground Clearance mm (in) 480 (19)
G: Bucket Hinge Height mm (in) 4250 (167)
H: Dumping Clearance (45 °) mm (in) 3000 (118)
I: Dumping Reach (45 °) mm (in) 1040 (41)
R1: Minimum Rotation Radius mm (in) 6150 (242)
R2: Minimum Rotation Radius mm (in) 7180 (283)
Travel Speed Forward/Reverse (at Power mode) km/h (mph) 36.4/24.6 (22.6/15.3)
Transmission Speeds (F/R) - 4/3
Articulation Angle (Left/Right) ( ° ) 37
Tire Size - 26.5-25-20PR (L3)
NOTE: These specifications are subject to change without notice.
B
G
C
37 °
R2
R1
E H
45 °
I
F
D
A
MNEC-12-001
10. 4
T1-2-1
SECTION 1 GENERAL
Group 2 Component Layout
Main Component (Overview)
1
6
7
2
3
8
9
10
5
Bucket
1-
Bell Crank
2-
Bucket Cylinder
3-
Front Combination Light
4-
(Headlight, Turn Signal Light,
Clearance Light, Hazard Light)
Front Work Light
5-
Rear Work Light
6-
Rear Combination Light (Turn
7-
Signal Light, Hazard Light,
Tail Light, Brake Light, Backup
Light)
Lift Arm Cylinder
8-
Lift Arm
9-
Bucket Link
10-
TNED-01-02-016
TNED-01-02-017
11. 1
T1-2-2
SECTION 1 GENERAL
Group 2 Component Layout
Fan Motor
1-
Radiator
2-
Inter Charge Air Cooler
3-
Coolant Level and Surge Tank
4-
Exhaust Filter/Muffler
5-
Air Cleaner
6-
Service Brake Accumulator
7-
Parking Brake Solenoid Valve
8-
Brake Charge Valve
9-
Manifold Valve
10-
Brake Valve
11-
Steering Pilot Valve
12-
Pilot Valve
13-
Steering Valve
14-
Loading Control Valve
15-
3-Spool Solenoid Valve Unit
16-
Ride Control Accumulator
17-
Stop Valve
18-
Flow Regulator Valve
19-
Engine Oil Filter
20-
Pilot Filter
21-
Hydraulic Oil Tank
22-
Engine
23-
Fuel Filter
24-
Fuel Pre-Filter
25-
Fuel Tank
26-
Torque Converter Cooler
27-
Hydraulic Oil Cooler
28-
11 12 13 14 15
16
17
18
19
20
21
22
23
27
28 24
25
26
Main Component
2
4
5
6
7
8 9
10
3
TNED-01-02-025
13. T1-2-4
SECTION 1 GENERAL
Group 2 Component Layout
Electric Component Layout (Overview)
Bucket Proximity Switch
1-
Lift Arm Angle Sensor
2-
ECM (Engine Control Module)
3-
Components Related with Cab
4-
(Refer to T1-2-5)
Components Related with
5-
Hydraulic Oil Tank (Refer to
T1-2-11)
Components Related with
6-
Engine (Refer to T1-2-13)
Back Buzzer
7-
Battery
8-
Components Related with Fuel
9-
Tank (Refer to T1-2-12)
Components Related with
10-
Hydraulic Pump (Refer to
T1-2-15)
Secondary Steering Pump
11-
Delivery Pressure Sensor
(Optional)
6
4
5
3
1
2
11 9
10
8
7
TNED-01-02-028
14. 5
6
3
2
1
T1-2-5
SECTION 1 GENERAL
Group 2 Component Layout
Electrical System (Cab)
Radio
1-
Upper Switch Panel (Optional)
2-
Speaker
3-
Rear Wiper Motor
4-
Components Related with
5-
Right Console (Refer to T1-2-7)
Components Related with
6-
Controllers and Relays (Refer
to T1-2-6)
Outside Temperature Sensor
7-
Brake Lamp Switch
8-
Front Wiper Motor
9-
Components Related with
10-
Monitor and Switches (Refer
to T1-2-8)
9
10
8
4
7 TNED-01-02-029
15. 11 10 9 8
6
5
7
T1-2-6
SECTION 1 GENERAL
Group 2 Component Layout
Controller and Relays
1- TCU (Transmission Control
Unit)
2- Flasher Relay
3- Air Conditioner Controller
4- MC (Main Controller)
5- ECM Main Relay
6- Fuel Pump Relay
7- Starter Cut Relay
8- Head Light Relay (Left) (AR1)
9- Head Light Relay (Right) (AR2)
10- High-Beam Relay (AR3)
11- Bucket Leveler Relay (AR4)
12- Back Buzzer Relay (AR5)
13- Work Light (Front) Relay (AR6)
14- Work Light (Rear) Relay (AR7)
15- Right Turn Signal Light Relay
(AR8)
16- Horn Relay (AR9)
17- Secondary Steering Relay
(AR10)
18- Parking Brake Relay 1 (RBR1)
19- Parking Brake Relay 2 (BR2)
20- Pilot Shut-Off Relay (BR3)
21- Brake Light Relay (BR4)
22- Load Dump Relay (BR5)
23- Neutral Relay (BR6)
24- Left Turn Signal Light Relay
(BR7)
25- Front Washer Relay (BR8)
26- Rear Wiper Relay (BR9)
27- Rear Washer Relay (BR10)
28- Fuse Box B
29- Fuse Box A
30- MPDr. Connector
3
4
2
1
28
30
29
12
17
22
27
16
21
26
15
20
25
14
19
24
13
18
23
TNED-01-02-009
TNED-01-02-029
TNED-01-02-030
16. T1-2-7
SECTION 1 GENERAL
Group 2 Component Layout
Right Console
Fingertip Control Type
Multi-Function Joystick Type
1- Auxiliary Control Lever
(Optional)
2- Bucket Control Lever
3- Lift Arm Control Lever
4- Forward/Reverse Switch
5- Front Control Lever Lock
Switch
6- Declutch Position Switch
7- Travel Mode Selector Switch
8- Power Mode Switch
9- Forward/Reverse Selector
Switch
10- Fan Reverse Rotation Switch
11- Auxiliary
12- Hydraulic Coupler Switch
(Optional)
13- Secondary Steering Operation
Check Switch (Optional)
14- Exhaust Filter Switch
15- Auxiliary
16- Auxiliary
17- Ride Control Switch (Optional)
18- Hold Switch
19- Right Console Slide Lever
20- DSS (Down Shift Switch)
21- Horn Switch
22- Quick Power Switch
23- Forward/Reverse Selector
Switch
24- Forward/Reverse Switch
25- Multi-Function Joystick Lever
26- Hold Switch (Under the Lever)
27- Horn Button (Under the Lever)
12
11
10
9
8
7
6
5
4
3
2
1
19
18
22
27
26
21
20
17
16
15
14
13
12
11
10
23
8
7
6
5
19
24
25
22 20 1
17
16
15
14
13
MNEC-01-041
MNEC-01-042
MNEC-01-043
MNEC-01-044
18. T1-2-9
SECTION 1 GENERAL
Group 2 Component Layout
1- Left Turn Signal Indicator
2- High Beam Indicator
3- Work Light Indicator
4- Right Turn Signal Indicator
5- Parking Brake Indicator
6- Brake Oil Low Pressure
Indicator
7- Hydraulic Oil Level Indicator
8- Low Steering Oil Pressure
Indicator
9- Transmission Warning
Indicator
10- Control Lever Lock Indicator
11- Fuel Level Indicator
12- Discharge Warning Indicator
13- Fuel Gauge
14- Multi Function Monitor
15- Communication System Error
Indicator
16- Coolant Temperature Gauge
17- Overheat Indicator
18- Engine Trouble Indicator
19- Engine Oil Low Pressure
Indicator
20- Preheat Indicator
21- Air Filter Restriction (Clogging)
Indicator
22- Clearance Light Indicator
Monitor Panel
MNEC-01-001
4
5
6
7
8
10
9
3
2
1
22
21
20
19
18
17
16
14 13
11
12
15
19. T1-2-10
SECTION 1 GENERAL
Group 2 Component Layout
Electrical System (Relays)
Battery Relay
1-
Fusible Link (100A)
2-
Fusible Link (65A)
3-
Starter Relay 1
4-
Glow Plug Relay
5-
1 4
5
2 3
MNEC-01-082
20. T1-2-11
SECTION 1 GENERAL
Group 2 Component Layout
Electrical System (Around Hydraulic Oil Tank)
MAF (Mass Air Flow) Sensor
1-
Air Cleaner
2-
Hydraulic Oil Level Sensor
3-
Secondary Steering Pump
4-
(Optional)
Hydraulic Oil Tank
5-
Hydraulic Oil Temperature
6-
Sensor
2
4
6
3
1 5
View A
TNED-01-02-023
TNED-01-02-024
A
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. T1-2-12
SECTION 1 GENERAL
Group 2 Component Layout
Electrical System (Around Fuel Tank)
Fuel Pump
1- Fan Pump Delivery Pressure
2-
Sensor
Fan Motor Relief Valve
3-
Fuel Tank
4-
Fuel Level Sensor
5-
1 2
3
5 4 TNED-01-02-031
23. T1-2-13
SECTION 1 GENERAL
Group 2 Component Layout
1 2 3 4 5
7
10 11
12
13
14
15
9
8
16
6
Engine and Fan Pump
EGR Valve
1-
Injector
2-
Boost Temperature Sensor
3-
Boost Pressure Sensor
4-
Glow Plug
5-
Cam Angle Sensor
6-
Turbocharger
7-
Overheat Switch
8-
Coolant Temperature Sensor
9-
Intake Throttle
10-
Common Rail Pressure Sensor
11-
Fuel Temperature Sensor
12-
Supply Pump
13-
Crank Revolution Sensor
14-
Engine Oil Pressure Sensor
15-
Fan Pump
16-
TNED-01-02-003
TNED-01-02-006
TNED-01-02-004
TNED-01-02-005
24. T1-2-14
SECTION 1 GENERAL
Group 2 Component Layout
Exhaust Filter
DOC Exhaust Temperature
1-
Sensor
CSF Exhaust Temperature
2-
Sensor
Differential Pressure Sensor
3-
1 2 3
TNED-02-03-001