This document provides instructions for installing an inlet manifold on a 325-A excavator engine. It involves installing a new gasket on the cylinder head, positioning the air inlet manifold and installing bolts to secure it, then installing air inlet elbows and connecting the air inlet heater solenoid. The final step is to install the valve mechanism cover.
Caterpillar cat 325 track type excavator (prefix 5 wk) service repair manual ...ifoseidkkd
This document provides instructions for disassembling the main control valve of an excavator model 325-A. It lists 33 detailed steps to remove components like pressure control valves, check valves, relief valves, spools, covers, and more. Safety notices are included to properly handle parts and avoid damage. Identification marks should be placed on removed parts to ensure correct reassembly.
More Related Content
Similar to Kawasaki 60 z7 wheel loader parts catalogue manual (serial no. 60d1 5001 and up)
This document provides instructions for installing an inlet manifold on a 325-A excavator engine. It involves installing a new gasket on the cylinder head, positioning the air inlet manifold and installing bolts to secure it, then installing air inlet elbows and connecting the air inlet heater solenoid. The final step is to install the valve mechanism cover.
Caterpillar cat 325 track type excavator (prefix 5 wk) service repair manual ...ifoseidkkd
This document provides instructions for disassembling the main control valve of an excavator model 325-A. It lists 33 detailed steps to remove components like pressure control valves, check valves, relief valves, spools, covers, and more. Safety notices are included to properly handle parts and avoid damage. Identification marks should be placed on removed parts to ensure correct reassembly.
Caterpillar cat 325 track type excavator (prefix 8 jg) service repair manual ...ifoseidkkd
This document provides instructions for removing and installing exhaust manifolds and inlet manifolds on Caterpillar 325 and 325L excavators powered by 3116 engines. It describes the required tools and outlines the step-by-step procedures for removing and installing exhaust manifolds, inlet manifolds, and inlet and exhaust valves. Illustrations are included to demonstrate the components and proper installation procedures. Safety and contamination prevention notices are also provided throughout.
Caterpillar cat 325 track type excavator (prefix 8 nl) service repair manual ...ifoseidkkd
This document provides instructions for installing a governor on an excavator engine. It describes preparing and installing various governor components like O-rings and seals. Tools needed are listed. Detailed illustrations show each step, like applying lubricant, inserting parts, and installing clips and pins to connect the governor. Proper torque specifications are provided. The instructions conclude by reinstalling related components like the fuel injection linkage.
Caterpillar cat 325 a excavator (prefix 6 rm) service repair manual (6rm00001...ifoseidkkd
This document provides instructions for removing and installing inlet and exhaust valve seat inserts on a Caterpillar 325-A excavator. It outlines the required tools and gives a step-by-step process that includes using a valve seat extractor tool to expand below the edge of the valve seat insert and remove it from the cylinder head. New valve seat inserts should be installed using the same basic process in reverse. Proper cleaning and lubrication of parts is emphasized to prevent premature wear.
Caterpillar cat 325 a excavator (prefix 7 tg) service repair manual (7tg00001...ifoseidkkd
This document provides disassembly instructions for travel motors on 325, 325B, and 325L excavators. It describes 24 steps to disassemble the travel motor, including removing the head, brake piston, barrel assembly, shoe retainer, springs and other components. Technicians are instructed to clean and mark components for reassembly. Safety notices advise containing fluids and disposing of them properly.
Caterpillar cat 325 a excavator (prefix 8 yk) service repair manual (8yk00001...ifoseidkkd
This document provides instructions for removing and installing an exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325-A excavator engine. The procedures include removing bolts and studs, applying anti-seize compound and sealer, installing gaskets, and tightening fasteners in a specific sequence using proper torque values. Required tools are listed for each job.
Caterpillar cat 325 a excavator (prefix 9 sg) service repair manual (9sg00001...ifoseidkkd
This document provides instructions for removing and installing exhaust manifolds and inlet and exhaust valves on 325-A, 325, 325L and 325LN excavator models. The procedures include:
1) Removing bolts, exhaust manifold, and gaskets from the cylinder head to remove the exhaust manifold.
2) Applying anti-seize compound and high temperature sealer before installing mounting studs and bolts to reinstall the exhaust manifold.
3) Disconnecting air inlet piping and removing bolts and elbows to remove the inlet manifold.
4) Installing a new gasket and reattaching elbows and bolts to install the inlet manifold.
5) Using a valve spring
Caterpillar cat 325 a excavator (prefix 9 zk) service repair manual (9zk00001...ifoseidkkd
This document provides instructions for installing an inlet manifold on a 325-A excavator engine. It involves installing a new gasket on the cylinder head, positioning the air inlet manifold and installing bolts to secure it, then installing air inlet elbows and connecting the air inlet heater solenoid. The instructions conclude by stating to install the valve mechanism cover by referring to another section of the repair manual.
Caterpillar cat 325 a fm l excavator (prefix 7 lm) service repair manual (7lm...ifoseidkkd
This document provides instructions for removing and installing an exhaust manifold and inlet and exhaust valves on a 325-A FM L EXCAVATOR 7LM. The removal procedure for the exhaust manifold involves removing mounting bolts and studs, and disassembling a three-piece manifold. The installation procedure specifies applying anti-seize compound and sealer, installing new gaskets, and tightening bolts in a sequence. Removing the inlet and exhaust valves requires compressing the valve springs and removing retainers, springs, seals and valves, then reversing the process to install new valves.
Caterpillar cat 325 a track type excavator (prefix 5 wk) service repair manua...ifoseidkkd
This document provides instructions for disassembling the main control valve of an excavator model 325-A. It lists 33 detailed steps to remove components like pressure control valves, check valves, relief valves, spools, housings, covers and more. Many parts require identification marks and cleaning to prevent damage or leakage. Safety precautions are noted, like holding a pressure control valve in place due to spring force. Dismantling involves removing seals, springs, valves and other parts from various assemblies.
Caterpillar cat 325 a track type excavator (prefix 8 jg) service repair manua...ifoseidkkd
This document provides instructions for removing and installing an exhaust manifold on a 325-A excavator. The removal procedure involves removing bolts and gaskets from the cylinder head assembly. The installation procedure describes applying anti-seize compound, installing new gaskets and bolts, and tightening the bolts in a specific sequence. Tools required are also listed.
Caterpillar cat 325 a track type excavator (prefix 8 nl) service repair manua...ifoseidkkd
This document provides instructions for installing a governor on an excavator engine. It describes cleaning and lubricating parts, placing the governor on the engine, installing clips and seals, and connecting the fuel injection control linkage. Tools required include various pin and plier tools. Pictures show each step, and cautions are given to keep parts clean and ensure free movement of linkages.
This document provides instructions for removing and installing an exhaust manifold, inlet manifold, valves, and valve guides on a 325-A FM L EXCAVATOR 7LM. The procedures include removing bolts and studs, applying anti-seize compound and sealer, installing gaskets and locking tabs, and torquing bolts to the specified values. Tools required are also listed. The document contains illustrations to supplement the written instructions.
Caterpillar cat 325 l excavator (prefix 6rm) service repair manual (6rm00001 ...ifoseidkkd
This document provides instructions for removing and installing inlet and exhaust valve guides on a Caterpillar 325-A excavator engine. The procedure involves using specialized tools to press the valve guides out of and back into the cylinder head assembly. Technicians are advised to keep parts clean and refer to other documents for specifications on reusable components. The process includes lubricating and inserting the valves back into the guides once installed.
Caterpillar cat 325 l excavator (prefix 7lm) service repair manual (7lm00001 ...ifoseidkkd
This document provides instructions for removing and installing an exhaust manifold and inlet and exhaust valves on a 325-A FM L EXCAVATOR 7LM. The removal procedure for the exhaust manifold involves removing mounting bolts and studs, and disassembling a three-piece manifold. The installation procedure specifies applying anti-seize compound and sealer, installing new gaskets, and tightening bolts in a sequence. Removing the inlet and exhaust valves requires compressing the valve springs and removing retainers, springs, seals and valves, then reversing the process to install new valves.
Caterpillar cat 325 l excavator (prefix 7tg) service repair manual (7tg00001 ...ifoseidkkd
This document provides disassembly instructions for travel motors on 325, 325B, and 325L excavators. It describes 24 steps to disassemble the travel motor, including removing the head, brake piston, barrel assembly, shoe retainer, springs and other components. Technicians are instructed to clean parts thoroughly, apply identification marks, and be careful not to damage mating surfaces when taking the motor apart.
Caterpillar cat 325 l excavator (prefix 8yk) service repair manual (8yk00001 ...ifoseidkkd
This document provides instructions for removing and installing an exhaust manifold, inlet manifold, valves, and valve guides on a Caterpillar 325-A excavator engine. The procedures include removing bolts and studs, applying anti-seize compound and sealer, installing gaskets, and tightening fasteners in a specific sequence using proper torque values. Required tools are listed for each job.
Caterpillar cat 325 l excavator (prefix 9sg) service repair manual (9sg00001 ...ifoseidkkd
This document provides instructions for removing and installing inlet and exhaust valve guides on a Caterpillar 325 excavator engine. The removal procedure involves using a valve guide driver tool to push the guides out of the cylinder head from the intake/exhaust ports. For installation, new guides are pressed into the cylinder head with the driver tool until flush. Proper cleaning and lubrication of parts is emphasized to prevent contaminants from causing premature wear.
Caterpillar cat 325 l track type excavator (prefix 5wk) service repair manual...ifoseidkkd
This document provides instructions for disassembling and assembling the main control valve for 325, 325L and 325N excavator models. It describes removing over 30 components of the valve including pressure control valves, check valves, relief valves, spools and housings. Precautions are given to mark parts as they are removed and ensure all components are clean before reassembly.
20. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.