This document is an operation and maintenance manual for a wheel loader. It provides safety instructions for operating and servicing the machine, including proper use of safety equipment, safe driving practices, and safety procedures for maintenance. The manual emphasizes the importance of only allowing qualified operators and service personnel to use the machine and stresses following all safety guidelines to prevent injuries or accidents.
Komatsu D31PX-21 Bulldozer Service Repair Manual S/N 50001 and upjfkksefmmsem
This is the Highly Detailed factory service repair manual for theKOMATSU D31PX-21 BULLDOZER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KOMATSU D31PX-21 BULLDOZER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Structure and Function, Maintenance Standard
Testing and Adjusting
Disassembly and Assembly
Others
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveKOMATSU D31PX-21 BULLDOZER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Komatsu D31PX-21 Bulldozer Service Repair Manual S/N 50001 and upjfkksefmmsem
This is the Highly Detailed factory service repair manual for theKOMATSU D31PX-21 BULLDOZER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KOMATSU D31PX-21 BULLDOZER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General
Structure and Function, Maintenance Standard
Testing and Adjusting
Disassembly and Assembly
Others
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveKOMATSU D31PX-21 BULLDOZER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
This is the Highly Detailed factory service repair manual for the KAWASAKI 135ZV-2 WHEEL LOADER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KAWASAKI 135ZV-2 WHEEL LOADER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Measurement for Performance Check
Function and Structure Chassis
CHECK AND ADJUSTMENT CHASSIS
FUNCTION AND STRUCTURE POWER
CHECK AND ADJUSTMENT POWER
FUNCTION AND STRUCTURE TCAND TM
CHECK AND ADJUSTMENT TC AND TM
FUNCTION AND STRUCTION HYDRAULIC
CHECK AND ADJUSTMENT HYDRAULIC
FUNCTION AND STRUCTURE BRAKE
CHECK AND ADJUSTMENT BRAKE
FUNCTION AND STRUCTURE ELECTRICAL
ELECTRICAL HYDRAULIC DIAGRAM
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have KAWASAKI 135ZV-2 WHEEL LOADER Service Repair Workshop Manual.
Thanks for visiting!
This is the Highly Detailed factory service repair manual for the KAWASAKI 135ZV-2 WHEEL LOADER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KAWASAKI 135ZV-2 WHEEL LOADER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
General Information
Measurement for Performance Check
Function and Structure Chassis
CHECK AND ADJUSTMENT CHASSIS
FUNCTION AND STRUCTURE POWER
CHECK AND ADJUSTMENT POWER
FUNCTION AND STRUCTURE TCAND TM
CHECK AND ADJUSTMENT TC AND TM
FUNCTION AND STRUCTION HYDRAULIC
CHECK AND ADJUSTMENT HYDRAULIC
FUNCTION AND STRUCTURE BRAKE
CHECK AND ADJUSTMENT BRAKE
FUNCTION AND STRUCTURE ELECTRICAL
ELECTRICAL HYDRAULIC DIAGRAM
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to have KAWASAKI 135ZV-2 WHEEL LOADER Service Repair Workshop Manual.
Thanks for visiting!
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
2. 93104-00041
October 25, 2012
INTRODUCTION
Read this manual carefully to learn how to operate and
service your machine correctly. Failure to do so could
result in personal injury or machine damage.
This standard specification machine can be operated
under the following conditions without being modified.
Atmospheric Temperature: -20 °C to 40 °C (-4 °F to 104 °F)
Altitude: 0 m to 2000 m (0 ft to 6600 ft)
In case the machine is used under conditions other than
described above, consult your nearest Kawasaki dealer.
This manual should be considered a permanent part of
your machine and should remain with the machine when
you sell it.
This machine is of metric design. Measurements in this
manual are metric. Use only metric hardware and tools as
specified.
Right-hand and left-hand sides are determined by
facing in the direction of forward travel.
Write product identification numbers in the Machine
Numbers section. Accurately record all the numbers
to help in tracing the machine should it be stolen.
Your dealer also needs these numbers when you order
parts. If this manual is kept on the machine, also file the
identification numbers in a secure place off the machine.
Use only diesel fuel with quality specified in JIS K-2204,
EN-590, ASTM D-975, GOST R52368 or GB252.
Failure to use diesel fuel with quality as specified
above may allow the engine to emit exhaust gas which
cleanness can not conform to the requests in various
relevant regulations. In addition, serious damage to the
engine may result. Consult with your nearest Kawasaki
dealer for detailed information.
Warranty is provided as a part of Kawasaki’s support
program for customers who operate and maintain their
equipment as described in this manual. The warranty is
explained on the warranty certificate which you should
have received from your dealer.
This warranty provides you with the assurance that
Kawasaki will back its products where defects appear
within the warranty period. In some circumstances,
Kawasaki also provides field improvements, often without
charge to the customer, even if the product is out of
warranty.
Should the equipment be abused, or modified to
change its performance beyond the original factory
specifications, the warranty will become void and field
improvements may be denied.
Setting fuel delivery above specifications or otherwise
overpowering machines will result in such action.
Only qualified, competent operators should be allowed
to operate the machine. Moreover, only officially licensed
personnel should be allowed to inspect and service the
machine.
All information, illustrations and specifications in this manual are based on the latest product information available at the
time of publication. The right is reserved to make changes at any time without notice.
3. CONTENTS
ENGINE EMISSION CONTROL LABEL .......................................1
MACHINE NUMBERS .......................................................................3
SAFETY ..............................................................................................S-1
Recognize Safety Information ...................................................S-1
Understand Signal Words ............................................................S-1
Follow Safety Instructions ...........................................................S-2
Prepare for Emergencies ..............................................................S-3
Wear Protective Clothing .............................................................S-3
Protect Against Noise ...................................................................S-4
Inspect Machine .............................................................................S-4
General Precautions for Cab .......................................................S-5
Use Handrails and Steps ..............................................................S-6
Never Ride Attachment.................................................................S-6
Adjust Operator’s Seat ..................................................................S-6
Ensure Safety Before Rising from or
Leaving Operator’s Seat ..........................................................S-7
Fasten Your Seat Belt .....................................................................S-7
Move and Operate Machine Safely ..........................................S-8
Handle Starting Aids Safely ........................................................S-8
Operate Only from Operator’s Seat .........................................S-9
Jump Starting ..................................................................................S-9
Investigate Job Site Beforehand ............................................S-10
Equipment of Head Guard, ROPS, FOPS ..............................S-11
Provide Signals for Jobs Involving Multiple Machines ...S-11
Keep Riders Off Machine ..........................................................S-12
Drive Safely ....................................................................................S-12
Drive Machine Safely (Work Site) ...........................................S-13
Drive Safely with Bucket Loaded ...........................................S-14
Drive on Snow Safely ..................................................................S-14
Travel on Public Roads Safely ..................................................S-15
Avoid Injury from Rollway Accidents ...................................S-15
Avoid Accidents from Backing Up and Turning ...............S-16
Avoid Positioning Bucket or
Attachment Over Anyone ...................................................S-17
Avoid Tipping ................................................................................S-17
Never Undercut a High Bank ...................................................S-18
Dig with Caution ..........................................................................S-18
Perform Truck Loading Safely .................................................S-18
Avoid Power Lines .......................................................................S-19
Precautions for Operation ........................................................S-19
Precautions for Lightning .........................................................S-19
Object Handling ..........................................................................S-20
Protect Against Flying Debris .................................................S-20
Park Machine Safely ....................................................................S-21
Store Attachments Safely .........................................................S-21
Transport Safely ...........................................................................S-22
Handle Fluids Safely−Avoid Fires ...........................................S-23
Practice Safe Maintenance .......................................................S-24
Warn Others of Service Work ..................................................S-25
Support Machine Properly .......................................................S-25
Stay Clear of Moving Parts .......................................................S-26
Support Maintenance Properly ..............................................S-26
Prevent Parts from Flying .........................................................S-27
Prevent Burns ................................................................................S-27
Replace Rubber Hoses Periodically .......................................S-28
Avoid High-Pressure Fluids ......................................................S-28
Prevent Fires ..................................................................................S-29
Evacuating in Case of Fire .........................................................S-30
Beware of Exhaust Fumes .........................................................S-30
Precautions for Welding and Grinding ................................S-30
Avoid Heating Near Pressurized Fluid Lines ......................S-31
Avoid Applying Heat to Lines Containing
Flammable Fluids ...................................................................S-31
Remove Paint Before Welding or Heating ..........................S-31
Beware of Asbestos and Silicon Dust and Other
Contamination.........................................................................S-32
Prevent Battery Explosions ......................................................S-32
Service Air Conditioning System Safely ..............................S-33
Handle Chemical Products Safely ..........................................S-33
Dispose of Waste Properly ........................................................S-34
SAFETY SIGNS .............................................................................S-35
COMPONENTS NAME .................................................................1-1
Components Name .......................................................................1-1
Canopy Vehicle ..........................................................................1-1
Cab Vehicle (Optional) .............................................................1-2
OPERATOR’S STATION ................................................................1-3
Cab Features .....................................................................................1-3
Front Console ...................................................................................1-4
Right Console ...................................................................................1-5
Monitor Panel ..................................................................................1-6
Stop Indicator (Red) .......................................................................1-7
Service Indicator (Yellow) ............................................................1-7
Parking Brake Indicator (Red) .....................................................1-8
Brake Oil Low Level Indicator (Red) .........................................1-8
Discharge Warning Indicator (Red) ..........................................1-8
Overheat Indicator (Red) .............................................................1-9
Engine Oil Low Pressure Indicator (Red) ................................1-9
Air Filter Restriction Indicator (Red) .........................................1-9
HST Warning Indicator (Red) ......................................................1-9
Engine Coolant Temperature Gauge ....................................1-10
Fuel Gauge......................................................................................1-10
Preheat Indicator (Yellow) ........................................................1-11
Turn Signal Indicator (Green) ..................................................1-11
High Beam Indicator (Blue) ......................................................1-11
Work Light Indicator (Yellow) ..................................................1-11
Clearance Light Indicator (Green) .........................................1-11
Monitor Display ............................................................................1-12
Forward/Reverse and Shift Position Indicator ..................1-13
F-N-R (Forward/Reverse) Position Indicator .................1-13
Shift Position Indicator .........................................................1-13
Speedometer ................................................................................1-14
Ride Control Indicator (Optional) ..........................................1-14
Machine Information Display ..................................................1-15
Shifting Item to Be Indicated on
Machine Information Display .......................................1-16
Hour Meter ...............................................................................1-16
Odometer .................................................................................1-16
HST Error Code Readout Switch .............................................1-17
Error Code ......................................................................................1-18
Switches, Steering Wheel and Pedals ...................................1-19
4. CONTENTS
F-N-R Lever ....................................................................................1-19
Neutral Lever Lock (F-N-R Lever) ............................................1-19
Steering ...........................................................................................1-20
Horn Switch ...................................................................................1-20
Turn Signal Lever .........................................................................1-20
Dimmer Switch .............................................................................1-20
Light Switch ...................................................................................1-21
Hazard Switch ...............................................................................1-22
Front and Rear Work Light Switch (Cab Vehicle) ..............1-23
Hi-Lo Selector Switch .................................................................1-24
Parking Brake Switch ..................................................................1-25
Wiper Operation ..........................................................................1-26
Front Window Wiper Switch (Cab Vehicle) .........................1-27
Rear Window Wiper Switch (Cab Vehicle) ...........................1-27
Accelerator Pedal .........................................................................1-28
Brake/inching Pedal ...................................................................1-28
Right Console (Front Attachment) ........................................1-29
Loader Control Lever ..................................................................1-30
Lever Locks ....................................................................................1-31
Right Console/Switch Panel ....................................................1-32
Key Switch ......................................................................................1-33
ECO Mode Switch ........................................................................1-33
Ride Control Switch (Optional) ...............................................1-34
Ride Control Operation ........................................................1-34
Heater (Optional) Operation ...................................................1-35
Heater Switch ..........................................................................1-35
Vent .............................................................................................1-35
Adjusting Operator’s Seat (Standard Type) ........................1-36
Components Name ...............................................................1-36
1. Damper Adjustment .........................................................1-36
2. Fore-Aft Position Adjustment .......................................1-36
Adjusting Operator’s Seat (Suspension Type) ...................1-37
Components Name ...............................................................1-37
1. Suspension adjustment ..................................................1-37
2. Fore-Aft Position Adjustment .......................................1-38
3. Armrest Angle Adjustment ............................................1-38
4. Reclining Angle Adjustment .........................................1-38
Seat Belt ..........................................................................................1-39
Seat Pocket (Suspension Seat).................................................1-39
Fuse Box ..........................................................................................1-40
ROPS Cab (Optional) ..................................................................1-42
Room Light ....................................................................................1-44
Sun Visor (Optional) ....................................................................1-44
Drink Holder ..................................................................................1-44
Coat Hook ......................................................................................1-45
Rear View Mirror ...........................................................................1-45
Room Rear View Mirror ..............................................................1-45
FM/AM Radio (Optional) Operation ......................................1-46
Controls on the Radio ...........................................................1-46
Tuning Procedures ................................................................1-47
Station Presetting Procedure .............................................1-47
Auto Station Presetting Procedure ..................................1-48
Digital Clock Setting Procedure ........................................1-48
Alarm Setting Procedure .....................................................1-48
Upper Switch Panel (Optional) ...............................................1-49
Rotary Beacon Switch (Optional) ...........................................1-49
Cab Door .........................................................................................1-50
Door Lock Knob ...........................................................................1-51
Door Open/Close Lever .............................................................1-51
Window Open/Close Levers ....................................................1-51
When Fully Opening the Door ................................................1-52
Door Lock Disengage Lever .....................................................1-52
Articulation Lock Bar ..................................................................1-53
Towing Pin .....................................................................................1-53
Engine Hood .................................................................................1-54
Maintenance Side Cover ...........................................................1-54
Steps .................................................................................................1-55
Vandal Resistant Devices ..........................................................1-55
BREAK-IN ..........................................................................................2-1
Observe Engine Operation Closely ..........................................2-1
OPERATING ENGINE ....................................................................3-1
Inspect Machine Daily Before Starting ...................................3-1
Check Before Starting ...................................................................3-3
Starting Engine ...............................................................................3-5
Check After Starting ......................................................................3-7
Using Booster Batteries ................................................................3-8
Warm Up Operation ...................................................................3-10
Warm Up Operation in Cold Weather ...................................3-11
Stopping Engine ..........................................................................3-12
DRIVING MACHINE ......................................................................4-1
Driving Machine .............................................................................4-1
Starting to Move .............................................................................4-2
Parking Brake Switch .....................................................................4-4
Drive Speed Change ......................................................................4-5
Changing Forward/Reverse Drive Direction .........................4-5
Steering ..............................................................................................4-6
Stop and Restart of Travel ...........................................................4-7
Precautions for Travel on Slopes ...............................................4-9
Precautions to Be Taken if Machine Failure Occurs .........4-10
Precautions for Travel Speeds .................................................4-11
Stop ..................................................................................................4-12
Parking ............................................................................................4-13
Emergency Evacuation ..............................................................4-15
OPERATING MACHINE ................................................................5-1
Loader Control Lever .....................................................................5-1
Lever Locks .......................................................................................5-2
Adjustment of Bucket Auto Leveler .........................................5-3
Before Operation ............................................................................5-4
Precautions for Operation ...........................................................5-4
Ensure Safety When Operating on Road Shoulders ..........5-4
Avoid Overloading .........................................................................5-5
Avoid Rapid Steering Changes and/or
Sudden Braking .........................................................................5-5
Avoid Operation with Biased Loads ........................................5-5
Excavation .........................................................................................5-6
Grading ..............................................................................................5-8
Loading ..............................................................................................5-9
Dozing .............................................................................................5-13
5. CONTENTS
Scooping ........................................................................................5-13
Removing Snow ...........................................................................5-14
Lifting Wheel Loader ..................................................................5-14
Precautions for After Operation .............................................5-15
TRANSPORTING ............................................................................6-1
Transporting by Road ...................................................................6-1
Transporting by Trailer .................................................................6-1
Loading/Unloading on Trailer ....................................................6-2
Transporting .....................................................................................6-4
Transporting Wheel Loader (Urgent Situation) ...................6-5
Towing Method ...............................................................................6-9
Lifting Machine ............................................................................6-10
MAINTENANCE ..............................................................................7-1
Correct Maintenance and Inspection Procedures ..............7-1
Check the Hour Meter Regularly ...............................................7-2
Use Correct Fuels and Lubricants .............................................7-2
Layout .................................................................................................7-3
Maintenance Guide Table ............................................................7-4
Preparations for Inspection and Maintenance ....................7-5
Lock Frames ......................................................................................7-6
Maintenance Side Cover ..............................................................7-7
Engine Hood ....................................................................................7-8
Opening Engine Hood ............................................................7-8
Closing Engine Hood ...............................................................7-8
Periodic Replacement of Parts ...................................................7-9
Maintenance Guide ....................................................................7-10
A. Greasing (See Page 7-19) ................................................7-10
B. Engine (See Page 7-22).....................................................7-11
C. Power Train (See Page 7-25)...........................................7-11
D. Hydraulic System (See Page 7-30) ...............................7-12
E. Fuel System (See Page 7-42)...........................................7-12
F. Air Cleaner (See Page 7-48).............................................7-12
G. Cooling System (See Page 7-49)...................................7-13
H. Electrical System (See Page 7-55) ................................7-13
I. Brake System (See Page 7-65).........................................7-13
J. Tire (See Page 7-68)............................................................7-14
K. Heater (Optional of Cab Vehicle) (See Page 7-74) ..7-14
L. Miscellaneous (See Page 7-75) ......................................7-15
Kind of Oils .....................................................................................7-16
Grease ........................................................................................7-16
Engine Oil .................................................................................7-16
Brake Oil ....................................................................................7-17
Transmission Oil, Axle Oil ....................................................7-17
Hydraulic Oil ............................................................................7-17
Long-Life Coolant ..................................................................7-18
A. Greasing .....................................................................................7-19
B. Engine .........................................................................................7-22
Check Engine Oil Level .........................................................7-22
Change Engine Oil .................................................................7-23
Replace Engine Oil Filter ......................................................7-24
C. Power Train ...............................................................................7-25
Change Transmission Oil .....................................................7-25
Change Axle Oil ......................................................................7-26
Check Oil Level ........................................................................7-27
Clean Transmission Air Breather .......................................7-28
Check Surrounding Areas Around Axles
and Covers for Oil Leaks .................................................7-29
Clean Axle Housing Air Breather ......................................7-29
D. Hydraulic System ....................................................................7-30
Inspection and Maintenance of Hydraulic Equipment ..7-30
Check Hydraulic Oil Level ...................................................7-31
Change Hydraulic Oil/Clean Hydraulic Oil Tank ..........7-32
Change/Cleaning ...................................................................7-32
Bleed Air from the Hydraulic System ..............................7-33
Procedures ................................................................................7-33
Clean Suction Filter ...............................................................7-34
Replace HST Oil Filter Element ..........................................7-35
Replace Return Filter .............................................................7-37
Replacement ............................................................................7-37
Check Hoses and Lines ........................................................7-39
Kinds of Hose/Line Fittings .................................................7-41
Precautions for Use ...............................................................7-41
E. Fuel System ...............................................................................7-42
Check Fuel Level .....................................................................7-42
Recommended Fuel ..............................................................7-42
Refueling ...................................................................................7-42
Drain Water and Sediment from Fuel Tank ...................7-43
Check and Drain Water from Fuel Pre-Filter .................7-44
Fuel Pre-Filter Drain Procedures .......................................7-44
Clean Fuel Pre-Filter ..............................................................7-45
Bleed Air from the Fuel System .........................................7-45
Replace Fuel Filter ..................................................................7-46
Check Fuel Hoses ...................................................................7-47
F. Air Cleaner ..................................................................................7-48
Clean and Replace Air Cleaner Element ........................7-48
G. Cooling System .......................................................................7-49
Long Life Coolant (LLC) ........................................................7-49
Precautions for Handling Long Life Coolant (LLC) .....7-50
Check Coolant Level .............................................................7-51
Check Fan Belt .........................................................................7-52
Check Fan Belt Tension ........................................................7-52
Adjust Fan Belt Tension ........................................................7-52
Change Coolant ......................................................................7-53
Clean Radiator and Oil Cooler ...........................................7-54
H. Electrical System .....................................................................7-55
Check Monitor Function and
All Other Instrument Operation ..................................7-55
Check Work Lights .................................................................7-56
Check Horn, Backup Buzzer and Backup Light ...........7-56
Check Electrical Harnesses and Fuses ............................7-57
Check and Replace Fuse ......................................................7-57
Fuse Box ....................................................................................7-58
Battery ........................................................................................7-59
Precautions for Handling Batteries ..................................7-59
In Case the Batteries Were Discharged ..........................7-61
Method to Recharge the Removed Battery ..................7-62
Method to Replace with Charged
Auxiliary Batteries ............................................................7-62
Check Electrolyte Level ........................................................7-63
Check Electrolyte Specific Gravity ...................................7-64
6. CONTENTS
I. Brake System ..............................................................................7-65
Check Brake Oil Level ...........................................................7-65
Check Right and Left Brake
Interlocking Performance .............................................7-66
Check Brake Performance ...................................................7-66
Check Play in Brake Pedal Stroke .....................................7-66
Check Parking Brake Force .................................................7-67
Check Brake Disc (Service and Parking) .........................7-67
Change Brake Oil ....................................................................7-67
J. Tire .................................................................................................7-68
Check and Adjust Tire Pressure .........................................7-68
Check Tire Pressure ................................................................7-68
Check Tire for Damage .........................................................7-69
Check Wheel Bolt Torque ....................................................7-69
Replace Tire ..............................................................................7-69
Tire Sizes to Be Used .............................................................7-70
Tire Rotation ............................................................................7-71
Rotation Method ....................................................................7-71
How to Check Wear Amount
(Tread Design Groove Depth) ......................................7-71
Removal and Installation of Tire..............................................7-72
Tire Wheel .......................................................................................7-73
K. Heater (Optional of Cab Vehicle) .......................................7-74
Check Heater for Damage ...................................................7-74
Check Heater Piping .............................................................7-74
L. Miscellaneous ...........................................................................7-75
Check Bucket Bolt-On Cutting Edge
for Tightness and/or Wear .............................................7-75
Replacement.............................................................................7-75
Check and Replace Seat Belt ..............................................7-76
Check Canopy/Cab for Damage and
Mounting Bolts for Tightness .......................................7-76
Check Windshield Washer Fluid Level
(Cab Vehicle) .......................................................................7-76
Check Play in Steering Wheel Stroke ..............................7-77
Check Accelerator Pedal Operation,
and Exhaust Gas Color and Noise ...............................7-78
Exhaust Gas Color and Noise .............................................7-78
Check Outside and Inside Rearview Mirror ..................7-79
Check Steps and Handrails for
Damage and Tightness ...................................................7-79
Clean Engine Compartment and Hood .........................7-79
Check and Adjust Valve Clearance ...................................7-80
Check Sound Absorbing Mat Around Engine .............7-80
Check Fuel Injection Timing ...............................................7-80
Check Engine Compression Pressure .............................7-81
Check and Clean Starter and Alternator ........................7-81
Retighten Front Axle, Rear Axle and Transmission
Mounting Nuts ..................................................................7-81
Tightening and Retightening Torque
of Nuts and Bolts ....................................................................7-82
Nut and Bolt Tightening Torque .......................................7-83
Tightening Torque .................................................................7-83
MAINTENANCE UNDER SPECIAL ENVIRONMENTAL
CONDITIONS ...................................................................................9-1
Maintenance Under
Special Environmental Conditions .....................................9-1
Precautions for Maintenance
During Cold Weather Season ................................................9-2
STORAGE .......................................................................................10-1
Storing Machine ..........................................................................10-1
Removing Machine from Storage .........................................10-2
TROUBLESHOOTING ................................................................11-1
Troubleshooting ..........................................................................11-1
Engine ..............................................................................................11-1
Hydraulic Control Lever ............................................................11-2
Hydraulic System .........................................................................11-3
Drive Function ..............................................................................11-4
Others ..............................................................................................11-5
SPECIFICATIONS ........................................................................12-1
Specifications ................................................................................12-1
OPTIONAL ATTACHMENTS ....................................................13-1
Operating Quick Coupler (Mechanical Type) ....................13-1
Operating Quick Coupler (Hydraulic Type) ........................13-3
INDEX .............................................................................................14-1
7. 1
ENGINE EMISSION CONTROL LABEL
EMISSION CONTROL LABEL: ENGINE LABEL (FOR EPA)
Emission control label is attached on the cylinder head cover.
M4FG-00-003
M4FG-00-004
9. 3
MACHINE NUMBERS
M4FG-00-003
The manufacturing Nos. explained in this group is the
individual number (serial No.) given to each machine and
hydraulic components. These numbers are requested
when inquiring any information on the machine and/or
components. Fill these serial Nos. in the blank spaces in this
group to immediately make them available upon request.
MACHINE
TYPE: _______________________________
PRODUCT
IDENTIFICATION
NUMBER: ___________________________
PRODUCT IDENTIFICATION NUMBER
PRODUCT
IDENTIFICATION
NUMBER: ___________________________
NOTE:
ENGINE
TYPE: _______________________________
MFG. NO.: ___________________________
Marks to indicate
the start and end
of the PIN
PRODUCT IDENTIFICATION
NUMBER (PIN)
*HFK4FG00A00000101*
M4FG-00-001
Label
11. Recognize Safety Information
x These are the SAFETY ALERT SYMBOLS.
t 8IFOZPVTFFUIFTFTZNCPMTPOZPVSNBDIJOFPSJOUIJT
manual, be alert to the potential for personal injury.
t 'PMMPXSFDPNNFOEFEQSFDBVUJPOTBOETBGFPQFSBUJOH
practices.
Understand Signal Words
x On machine safety signs, signal words designating the
degree or level of hazard - DANGER, WARNING, or CAUTION
- are used with the safety alert symbol.
t DANGER indicates an imminently hazardous situation
which, if not avoided, will result in death or serious injury.
t WARNING indicates a potentially hazardous situation
which, if not avoided, could result in death or serious
injury.
t CAUTION indicates a potentially hazardous situation
which, if not avoided, may result in minor or moderate
injury.
t DANGER or WARNING safety signs signs are located
near specific hazards. General precautions are listed on
CAUTION safety signs.
t 4PNFTBGFUZTJHOTEPOPUVTFBOZPGUIFEFTJHOBUFETJHOBM
words above after the safety alert symbol has been used
on this machine.
x To avoid confusing machine protection with personal
safety messages, a signal word IMPORTANT indicates a
situation which, if not avoided, could result in damage to
the machine.
x fNOTE indicates an additional explanation for an
element of information.
S-1
SA-688
SA-1223
SAFETY
12. Follow Safety Instructions
x Carefully read and follow all safety signs on the machine
and all safety messages in this manual.
x Safety signs should be installed, maintained and replaced
when necessary.
t *GBTBGFUZTJHOPSUIJTNBOVBMJTEBNBHFEPSNJTTJOH
order a replacement from your authorized dealer in the
same way you order other replacement parts (be sure to
state machine model and serial number when ordering).
x Learn how to operate the machine and its controls correctly
and safely.
x Allow only trained, qualified, authorized personnel to
operate the machine.
x Keep your machine in proper working condition.
t 6OBVUIPSJ[FENPEJGJDBUJPOTPGUIFNBDIJOFNBZJNQBJS
its function and / or safety and affect machine life.
t %POPUNPEJGZBOZNBDIJOFQBSUTXJUIPVUBVUIPSJ[BUJPO
Failure to do so may deteriorate the part safety, function,
and / or service life. In addition, personal accident,
machine trouble, and / or damage to material caused by
unauthorized modifications will void Kawasaki Warranty
Policy.
t %POPUVTFBUUBDINFOUTBOEPSPQUJPOBMQBSUTPS
equipment not authorized by Kawasaki. Failure to do so
may deteriorate the safety, function, and / or service life
of the machine. In addition, personal accident, machine
trouble, and / or damage to material caused by using
unauthorized attachments and / or optional parts or
equipment will void Kawasaki Warranty Policy.
x The safety messages in this SAFETY chapter are intended
to illustrate basic safety procedures of machines. However
it is impossible for these safety messages to cover every
hazardous situation you may encounter. If you have any
questions, you should first consult your supervisor and /
or your authorized dealer before operating or performing
maintenance work on the machine.
SAFETY
S-2
SA-003
13. Prepare for Emergencies
x Be prepared if a fire starts or if an accident occurs.
t ,FFQBGJSTUBJELJUBOEGJSFFYUJOHVJTIFSPOIBOE
t 5IPSPVHIMZSFBEBOEVOEFSTUBOEUIFMBCFMBUUBDIFEPO
the fire extinguisher to use it properly.
t 5PFOTVSFUIBUBGJSFFYUJOHVJTIFSDBOCFBMXBZTVTFE
when necessary, check and service the fire extinguisher
at the recommended intervals as specified in the fire
extinguisher manual.
t TUBCMJTIFNFSHFODZQSPDFEVSFHVJEFMJOFTUPDPQFXJUI
fires and accidents.
t ,FFQFNFSHFODZOVNCFSTGPSEPDUPST
BNCVMBODF
service, hospital, and fire department posted near your
telephone.
Wear Protective Clothing
x Wear close fitting clothing and safety equipment
appropriate to the job.
You may need:
A hard hat
Safety shoes
Safety glasses, goggles, or face shield
Heavy gloves
Hearing protection
Reflective clothing
Wet weather gear
Respirator or filter mask.
Be sure to wear the correct equipment and clothing for the
job. Do not take any chances.
t WPJEXFBSJOHMPPTFDMPUIJOH
KFXFMSZ
PSPUIFSJUFNTUIBU
can catch on control levers or other parts of the machine.
x Operating equipment safely requires the full attention of
the operator. Do not wear radio or music headphones while
operating the machine.
SAFETY
S-3
SA-438
SA-437
14. Protect Against Noise
x Prolonged exposure to loud noise can cause impairment or
loss of hearing.
t 8FBSBTVJUBCMFIFBSJOHQSPUFDUJWFEFWJDFTVDIBT
earmuffs or earplugs to protect against objectionable or
uncomfortably loud noises.
Inspect Machine
x Inspect your machine carefully each day or shift by walking
around it before you start it to avoid personal injury.
t *OUIFXBMLBSPVOEJOTQFDUJPO
CFTVSFUPDPWFSBMMQPJOUT
described in the“Inspect Machine Daily Before Starting”
section in the operator’s manual.
SAFETY
S-4
SA-435
SA-434
15. General Precautions for Cab
t #FGPSFFOUFSJOHUIFDBC
UIPSPVHIMZSFNPWFBMMEJSUBOE
/ or oil from the soles of your work boots. If any controls
such as a pedal is operated while with dirt and / or oil on
the soles of the operator’s work boots the operator’s foot
may slip off the pedal, possibly resulting in a personal
accident.
t %POPUMFBWFQBSUTBOEPSUPPMTMZJOHBSPVOEUIF
operator’s seat. Store them in their specified locations.
t WPJETUPSJOHUSBOTQBSFOUCPUUMFTJOUIFDBC%POPU
attach any transparent type window decorations on
the windowpanes as they may focus sunlight, possibly
starting a fire.
t 3FGSBJOGSPNMJTUFOJOHUPUIFSBEJP
PSVTJOHNVTJD
headphones or mobile telephones in the cab while
operating the machine.
t ,FFQBMMGMBNNBCMFPCKFDUTBOEPSFYQMPTJWFTBXBZGSPN
the machine.
t GUFSVTJOHUIFBTIUSBZ
BMXBZTDPWFSJUUPFYUJOHVJTIUIF
match and / or tobacco.
t %POPUMFBWFDJHBSFUUFMJHIUFSTJOUIFDBC8IFOUIF
temperature in the cab increases, the lighter may
explode.
SAFETY
S-5
16. Use Handrails and Steps
x Falling is one of the major causes of personal injury.
t 8IFOZPVHFUPOBOEPGGUIFNBDIJOF
BMXBZTGBDFUIF
machine and maintain a three-point contact with the
steps and handrails.
t %POPUVTFBOZDPOUSPMTBTIBOEIPMET
t /FWFSKVNQPOPSPGGUIFNBDIJOF/FWFSNPVOUPS
dismount a moving machine.
t #FDBSFGVMPGTMJQQFSZDPOEJUJPOTPOQMBUGPSNT
TUFQT
BOE
handrails when leaving the machine.
Never Ride Attachment
x Never allow anyone to ride attachment or the load. This is
an extremely dangerous practice.
Adjust Operator’s Seat
x A poorly adjusted seat for either the operator or the work
at hand may quickly fatigue the operator leading to
misoperations.
t 5IFTFBUTIPVMECFBEKVTUFEXIFOFWFSDIBOHJOHUIF
operator for the machine.
t 5IFPQFSBUPSTIPVMECFBCMFUPGVMMZEFQSFTTUIFQFEBMT
and to correctly operate the control levers with his back
against the seat back.
t *GOPU
NPWFUIFTFBUGPSXBSEPSCBDLXBSE
BOEDIFDL
again.
t EKVTUUIFSFBSWJFXNJSSPSQPTJUJPOTPUIBUUIFCFTUSFBS
visibility is obtained from the operator’s seat. If the mirror
is broken, immediately replace it with a new one.
SAFETY
S-6
SA-439
SA-462
17. Ensure Safety Before Rising from or Leaving
Operator’s Seat
x Before rising from the operator’s seat to open / close either
side window or to adjust the seat position, be sure to first
lower the front attachment to the ground and then move
the loader control lever lock to the LOCK position. Failure to
do so may allow the machine to unexpectedly move when
a body part unintentionally comes in contact with a control
lever, possibly resulting in serious personal injury or death.
t #FGPSFMFBWJOHUIFNBDIJOF
CFTVSFUPGJSTUMPXFSUIFGSPOU
attachment to the ground and then move the loader
control lever lock to the LOCK position. Turn the key
switch OFF to stop the engine.
t #FGPSFMFBWJOHUIFNBDIJOF
DMPTFBMMXJOEPXT
EPPST
BOE
access covers and lock them up.
Fasten Your Seat Belt
x If the machine should overturn, the operator may become
injured and / or thrown from the cab. Additionally the
operator may be crushed by the overturning machine,
resulting in serious injury or death.
t 1SJPSUPPQFSBUJOHUIFNBDIJOF
UIPSPVHIMZFYBNJOF
webbing, buckle and attaching hardware. If any item is
damaged or worn, replace the seat belt or component
before operating the machine.
t #FTVSFUPSFNBJOTFBUFEXJUIUIFTFBUCFMUTFDVSFMZ
fastened at all times when the machine is in operation to
minimize the chance of injury from an accident.
t 8FSFDPNNFOEUIBUUIFTFBUCFMUCFSFQMBDFEFWFSZUISFF
years regardless of its apparent condition.
SAFETY
S-7
SA-237
18. Move and Operate Machine Safely
x Bystanders can be run over.
t 5BLFFYUSBDBSFOPUUPSVOPWFSCZTUBOEFST$POGJSNUIF
location of bystanders before moving, swinging, or
operating the machine.
t MXBZTLFFQUIFUSBWFMBMBSNBOEIPSOJOXPSLJOH
condition (if equipped). It warns people when the
machine starts to move.
t 6TFBTJHOBMQFSTPOXIFONPWJOHPSPQFSBUJOHUIF
machine in congested areas. Coordinate hand signals
before starting the machine.
t 6TFBQQSPQSJBUFJMMVNJOBUJPO$IFDLUIBUBMMMJHIUTBSF
operable before operating the machine. If any faulty
illumination is present, immediately repair it.
Handle Starting Aids Safely
Starting fluid:
x Starting fluid is highly flammable.
t ,FFQBMMTQBSLTBOEGMBNFBXBZXIFOVTJOHJU
t ,FFQTUBSUJOHGMVJEXFMMBXBZGSPNCBUUFSJFTBOEDBCMFT
t 3FNPWFDPOUBJOFSGSPNNBDIJOFJGFOHJOFEPFTOPUOFFE
starting fluid.
t 5PQSFWFOUBDDJEFOUBMEJTDIBSHFXIFOTUPSJOHB
pressurized container, keep the cap on the container, and
store it in a cool, well-protected location.
t %POPUJODJOFSBUFPSQVODUVSFBTUBSUJOHGMVJEDPOUBJOFS
SAFETY
S-8
SA-293
SA-398
19. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
20. Operate Only from Operator’s Seat
x Inappropriate engine starting procedures may cause the
machine to runaway, possibly resulting in serious injury or
death.
t 4UBSUUIFFOHJOFPOMZXIFOTFBUFEJOUIFPQFSBUPShTTFBU
t /73TUBSUUIFFOHJOFXIJMFTUBOEJOHPOUIFUJSFPSPO
ground.
t %POPUTUBSUFOHJOFCZTIPSUJOHBDSPTTTUBSUFSUFSNJOBMT
t #FGPSFTUBSUJOHUIFFOHJOF
DPOGJSNUIBUBMMDPOUSPMMFWFST
are in neutral.
t #FGPSFTUBSUJOHUIFFOHJOF
DPOGJSNUIFTBGFUZBSPVOEUIF
machine and sound the horn to alert bystanders.
Jump Starting
x Battery gas can explode, resulting in serious injury.
t *GUIFFOHJOFNVTUCFKVNQTUBSUFE
CFTVSFUPGPMMPXUIF
instructions shown in the“OPERATING ENGINE”chapter in
the operator’s manual.
t 5IFPQFSBUPSNVTUCFJOUIFPQFSBUPSTTFBUTPUIBUUIF
machine will be under control when the engine starts.
Jump starting is a two-person operation.
t /FWFSVTFBGSP[FOCBUUFSZ
t 'BJMVSFUPGPMMPXDPSSFDUKVNQTUBSUJOHQSPDFEVSFTDPVME
result in a battery explosion or a runaway machine.
SAFETY
S-9
SA-032
SA-431
21. Investigate Job Site Beforehand
x When working at the edge of an excavation or on a road
shoulder, the machine could tip over, possibly resulting in
serious injury or death.
t *OWFTUJHBUFUIFDPOGJHVSBUJPOBOEHSPVOEDPOEJUJPOTPG
the job site beforehand to prevent the machine from
falling and to prevent the ground, stockpiles, or banks
from collapsing.
t .BLFBXPSLQMBO6TFNBDIJOFTBQQSPQSJBUFUPUIFXPSL
and job site.
t 3FJOGPSDFHSPVOE
FEHFT
BOESPBETIPVMEFSTBT
necessary. Keep the machine well back from the edges of
excavations and road shoulders.
t 8IFOXPSLJOHPOBOJODMJOFPSPOBSPBETIPVMEFS
employ a signal person as required.
t $POGJSNUIBUZPVSNBDIJOFJTFRVJQQFEXJUIB'014DBC
before working in areas where the possibility of falling
stones or debris exist.
t 8IFOUIFGPPUJOHJTXFBL
SFJOGPSDFUIFHSPVOECFGPSF
starting work.
t 8IFOXPSLJOHPOGSP[FOHSPVOE
CFFYUSFNFMZBMFSUT
ambient temperatures rise, footing becomes loose and
slippery.
t #FXBSFPGUIFQPTTJCJMJUZPGGJSFXIFOPQFSBUJOHUIF
machine near flammable objects such as dry grass.
SAFETY
S-10
SA-447
22. Equipment of Head Guard, ROPS, FOPS
In case the machine is operated in areas where the possibility
of falling stones or debris exist, equip a head guard, ROPS, or
FOPS according to the potential hazardous conditions. (The
standard cab for this machine corresponds to ROPS and FOPS.)
Any modification of the ROPS structure will modify its
performances and its certification will be lost.
ROPS: Roll-Over Protective Structure
FOPS: Falling Object Protective Structure
Provide Signals for Jobs Involving Multiple
Machines
x For jobs involving multiple machines, provide signals
commonly known by all personnel involved. Also, appoint
a signal person to coordinate the job site. Make sure that all
personnel obey the signal person’s directions.
SAFETY
S-11
SA-521
SA-481