This technical manual provides maintenance instructions for the John Deere Model JD410 wheeled loader backhoe. It consists of 15 chapters that cover troubleshooting procedures, maintenance of major vehicle systems like the engine, transmission, hydraulics, and attachments. The manual begins with introductory information and safety warnings, and includes a table of contents listing the systems covered in each chapter. Technicians are instructed to use this manual along with other specified publications for maintaining and repairing the backhoe.
Case M4K Forklift Truck Service Repair Manualjksmemm ekmdm
This is the Highly Detailed factory service repair manual for theCASE M4K FORKLIFT TRUCK , this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CASE M4K FORKLIFT TRUCK Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Covers:
Chapter 1 Introductory Information, Equipment Description and Data, and Theory of Operation
Chapter 2 Organizational Troubleshooting Procedures
Chapter 3 Direct Support Troubleshooting Procedures
Chapter 4 Organizational Maintenance Instructions
Chapter 5 Direct Support Maintenance Instructions
Chapter 6 General Support Maintenance Instructions
Chapter 7 Supporting Information
Parts Manual Covers:
Engine
Fuel System
Exhaust System
Cooling System
Electrical System
Transmission
Propeller and Propeller Shafts
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCASE M4K FORKLIFT TRUCK Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
Case M4K Forklift Truck Service Repair Manualjksmemm ekmdm
This is the Highly Detailed factory service repair manual for theCASE M4K FORKLIFT TRUCK , this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.CASE M4K FORKLIFT TRUCK Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Covers:
Chapter 1 Introductory Information, Equipment Description and Data, and Theory of Operation
Chapter 2 Organizational Troubleshooting Procedures
Chapter 3 Direct Support Troubleshooting Procedures
Chapter 4 Organizational Maintenance Instructions
Chapter 5 Direct Support Maintenance Instructions
Chapter 6 General Support Maintenance Instructions
Chapter 7 Supporting Information
Parts Manual Covers:
Engine
Fuel System
Exhaust System
Cooling System
Electrical System
Transmission
Propeller and Propeller Shafts
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveCASE M4K FORKLIFT TRUCK Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Core technology of Hyundai Motor Group's EV platform 'E-GMP'
John deere jd410 backhoe loader service repair manual
1. TM 5-2420-222-34
TECHNICAL MANUAL
DIRECT SUPPORT AND GENERAL SUPPORT
MAINTENANCE MANUAL
FOR
TRACTOR, WHEELED,
DED, LOADER BACKHOE:
WITH HYDRAULIC IMPACT TOOL AND
WITH HYDRAULIC EARTH AUGER ATTACHMENT
JOHN DEERE MODEL JD410 (CCE)
WITH BUCKET, IMPACTOR,
AND EARTH DRILL
(NSN 2420-00-567-0135)
This manual and LO 5-2420-222-12, TM 5-2420-222-20P, and TM 5-2420-222-34P supersede TM 5-2420-
222-14&P-1, dated 1 January 1987, and TM 5-2420-222-14&P-2, dated 1 November 1986, including all
changes.
Approved for public release; distribution is unlimited.
HEADQUARTERS, DEPARTMENT OF THE ARMY
26 AUGUST 1992
Troubleshooting 2-1
Engine Assembly 3-1
Clutch Assembly 4-1
Fuel System 5-1
Transmission 8-1
Front and Rear
Axles 9-1
Brake System 10-1
Steering System 11-1
Hydraulic System 14-1
Body and
Accessories 13-1
Cranes, Shovels, and
Earthmoving
Equipment 15-1
Appendices A-1
2. TM 5-2420-222-34
FOR INFORMATION ON FIRST AID, REFER TO FM 21-11.
WARNING
CARBON MONOXIDE EXHAUST GASES CAN KILL!
Carbon monoxide is a colorless, odorless, deadly poisonous gas which, when breathed, deprives the body of oxygen and
causes suffocation. Exposure to air containing carbon monoxide produces symptoms of headache, dizziness, loss of
muscular control, apparent drowsiness, and coma. Permanent brain damage or death can result from severe exposure.
Carbon monoxide occurs in exhaust fumes of internal combustion engines. Carbon monoxide can become dangerously
concentrated under conditions of inadequate ventilation. The following precautions must be observed to ensure safety of
personnel when engine of loader backhoe is operated for any purpose.
(1) DO NOT operate loader backhoe engine In enclosed areas.
(2) DO NOT idle loader backhoe engine without ventilator blower operating.
(3) BE ALERT at all times for exhaust odors.
(4) BE ALERT for exhaust poisoning symptoms. They are:
• Headache
• Dizziness
• Sleepiness
• Loss of muscular control
(5) If you see another person with exhaust poisoning symptoms:
• Remove person from area.
• Expose to fresh air.
• Keep person warm.
• Do not permit physical exercise.
• Administer artificial respiration, if necessary.
• Notify a medic.
(6) BE AWARE: The field protective mask for chemical-biological-radiological (CBR) protection will not protect
you from carbon monoxide poisoning.
The Best Defense Against Carbon Monoxide Poisoning Is Good Ventilation.
a
3. TM 5-2420-222-34
WARNING
ASBESTOS HAZARD
DO NOT handle clutch assembly components unless area has been properly cleaned. There may be asbestos dust on
these components which can be dangerous if you touch it or breathe it. Wear an approved filter mask and gloves. Never
use compressed air or a dry brush to clean clutch assembly components. Dust may be removed using an Industrial-type
vacuum cleaner. Clean dust or mud away from brake components with water and a wet, soft brush or cloth. Failure to
follow this warning may result in serious illness or death to personnel.
WARNING
CLEANING AGENTS
• Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear protective goggles and gloves, and use only
in a well-ventilated area. Avoid contact with skin, eyes, and clothes, and DO NOT breathe vapors. DO NOT use
near open flame or excessive heat. The solvent's flash point is 100°F-138 F (38° C-59° C). If you become dizzy
while using cleaning solvent, immediately get fresh air and medical help. If solvent contacts eyes, immediately
wash your eyes and get medical aid.
• Cleaning compound, trichlorotrifluoroethane, for electrical parts is toxic and flammable, and reacts violently with
aluminum, titanium, barium, lithium, samarium, sodium, and potassium. Always wear protective goggles and
rubber gloves, and use only in a well-ventilated area. DO NOT wear jewelry while using cleaning compound.
Avoid contact with skin, eyes, and clothes, and DO NOT breathe vapors. Cleaning compound fumes or vapors
can take the place of air and may become a cancer producing agent. DO NOT use near open flame or excessive
heat. The compound's boiling point is 114°F (46° C). If you become dizzy while using cleaning compound,
immediately get fresh air and medical help. If compound contacts eyes, immediately wash your eyes with water
and get medical aid.
• Denatured alcohol is highly flammable and poisonous. Drinking this alcohol can cause blindness and death.
Avoid inhaling its fumes. Keep away from open flames. Failure to follow this warning may result in serious injury
or death to personnel.
WARNING
COMPRESSED AIR
Compressed air used for cleaning or drying purposes, or for clearing restrictions, should never exceed 30 psi (207 kPa).
Wear protective clothing (goggles/shield, gloves, etc.) and use caution to avoid injury to personnel.
WARNING
ELECTRICAL SYSTEM
• When troubleshooting an electrical malfunction or performing electrical maintenance, ALWAYS disconnect the
battery cables. Failure to do so may result in injury or death due to electric shock.
• Battery acid (electrolyte) is extremely dangerous. Use care when removing battery caps. Serious injury to
personnel may result if battery acid contacts skin or eyes.
b
4. TM 5-2420-222-34
WARNING
HANDLING HEAVY COMPONENTS
Use extreme caution when handling heavy parts. Lifting device is required when parts weigh over 50 lb (23 kg) for a single
person lift, over 100 lb (45 kg) for a two person lift, and over 150 lb (68 kg) for a three or more person lift. Keep clear of
heavy parts supported only by lifting device. Failure to follow this warning may cause serious Injury or death to personnel.
WARNING
LIVE STEAM
Avoid contact with live steam. Live steam can burn skin, cause blindness, and other serious injury. Be sure to wear
protective apron, gloves, and safety goggles when using live steam.
WARNING
NBC HAZARD
If NBC exposure Is suspected, all engine air cleaner air filter media should be handled by personnel wearing protective
equipment. Consult your NBC Officer or NBC NCO for appropriate handling or disposal procedures.
c/(d Blank)
5. *TM 5-2420-222-34
TECHNICAL MANUAL HEADQUARTERS
DEPARTMENT OF THE ARMY
TM 5-2420-222-34 Washington D. C., 26 August 1992
DIRECT SUPPORT AND GENERAL SUPPORT
MAINTENANCE MANUAL
FOR
TRACTOR, WHEELED,
DED, LOADER BACKHOE:
WITH HYDRAULIC IMPACT TOOL AND
WITH HYDRAULIC EARTH AUGER ATTACHMENT
JOHN DEERE MODEL JD410 (CCE)
WITH BUCKET, IMPACTOR,
AND EARTH DRILL
(NSN 2420-00-567-0135)
REPORTING ERRORS AND RECOMMENDING IMPROVEMENTS
You can help improve this manual. If you find any mistakes or if you know of a way to improve the
procedures, please let us know. Mail your letter, DA Form 2028 (Recommended Changes to Publications
and Blank Forms), or DA Form 2028-2, located in the back of this manual, direct to: Commander, U.S.
Army Tank-Automotive Command, ATTN: AMSTA-MB, Warren, MI 48397-5000. A reply will be furnished
to you.
TABLE OF CONTENTS
Page
How To Use This Manual.................................................................................................... iii
CHAPTER 1 INTRODUCTION
Section I. General Information .................................................................................................... 1-1
Section II. Equipment Description and Data ................................................................................ 1-2
Section III. Repair Parts; Special Tools; Test, Measurement,
and Diagnostic Equipment (TMDE); and Support Equipment..................................... 1-3
Section IV. General Maintenance Instructions ............................................................................. 1-4
CHAPTER 2 TROUBLESHOOTING PROCEDURES ............................................................................. 2-1
CHAPTER 3 ENGINE ASSEMBLY MAINTENANCE
Section I. Engine Assembly Maintenance .......................................................................................... 3-1
Section II. Lubrication System Maintenance ....................................................................................... 3-115
*This manual and LO 5-2420-222-12, TM 5-2420-222-10, TM 5-2420-222-20-1, -20-2, -20-3, TM 5-2420-222-20P, and
TM 5-2420-222-34P supersede TM 5-2420-222-14&P-1, dated 1 January 1987, and TM 5-2420-222-14&P-2, dated 1
November 1 1986, Including all changes.
Approved for public release; distribution Is unlimited.
6. TM 5-2420-222-34
TABLE OF CONTENTS (CON’T)
Page
CHAPTER 4 CLUTCH ASSEMBLY MAINTENANCE............................................................................. 4-1
CHAPTER 5 FUEL SYSTEM MAINTENANCE........................................................................................ 5-1
CHAPTER 6 COOLING SYSTEM MAINTENANCE ................................................................................ 6-1
CHAPTER 7 ELECTRICAL SYSTEM MAINTENANCE .......................................................................... 7-1
CHAPTER 8 TRANSMISSION MAINTENANCE ..................................................................................... 8-1
CHAPTER 9 AXLE MAINTENANCE
Section I. Front Axle Maintenance .............................................................................................. 9-1
Section II. Rear Axle Maintenance............................................................................................... 9-10
CHAPTER 10 BRAKE SYSTEM MAINTENANCE .................................................................................... 10-1
CHAPTER 11 STEER!NG SYSTEM MAINTENANCE .............................................................................. 11-1
CHAPTER 12 FRAME MAINTENANCE.................................................................................................... 12-1
CHAPTER 13 BODY AND ACCESSORIES MAINTENANCE................................................................... 13-1
CHAPTER 14 HYDRAULIC SYSTEM MAINTENANCE............................................................................ 14-1
CHAPTER 15 CRANES, SHOVELS, AND EARTHMOVING EQUIPMENT
COMPONENTS MAINTENANCE
Section I. Backhoe Assembly Maintenance................................................................................ 15-1
Section II. Loader Assembly Maintenance................................................................................... 15-22
CHAPTER 16 PARTS PECULIAR MAINTENANCE.................................................................................. 16-1
APPENDIX A REFERENCES.................................................................................................................... A-1
APPENDIX B EXPENDABLE/DURABLE SUPPLIES AND MATERIALS LIST....................................... B-1
APPENDIX C ILLUSTRATED LIST OF MANUFACTURED ITEMS......................................................... C-1
APPENDIX D TORQUE LIMITS ................................................................................................................ D-1
INDEX ................................................................................................................................. Index-1
ii
7. TM 5-2420-222-34
HOW TO USE THIS MANUAL
This manual is designed to help maintain the John Deere Model JD410 Wheeled Tractor Loader Backhoe. This
manual describes in detail the Direct Support and General Support Maintenance prescribed by the Maintenance Allocation
Chart (see TM 5-2420-222-20) and Source, Maintenance, and Recoverability (SMR) Codes (see TM 5-2420-222-34P).
FEATURES OF THIS MANUAL:
• Bleed-to-edge indicators on the cover and on the edge of the applicable manual pages provide quick access
to chapters most often used.
• A table of contents is provided for all chapters and sections.
• WARNINGs, CAUTIONs, NOTEs, subject headings, and other important information are highlighted in bold
print as visual aids.
• Statements and words of particular importance are printed in capital letters to create emphasis.
• Instructions are located together with illustrations that show the specific task or, which the technician is
working
• An alphabetical index is provided at the end of the manual to assist in locating information not readily found in
the table of contents.
• Technical instructions include metric units in addition to standard units. A metric conversion chart is
provided on the inside back cover.
FOLLOW THESE GUIDELINES WHEN YOU USE THE MANUAL:
• Read through this manual and become familiar with its contents before proceeding to specific maintenance
warning summary is provided at the beginning of this manual and should be read before performing any
maintenance tasks.
• In the actual maintenance tasks, follow all WARNINGs, CAUTIONs, and NOTEs. These are given
immediately preceding the procedural steps to which they apply. If these instructions are not followed or care
is not taken, injury to personnel or equipment damage may result.
• Within a chapter, section, or paragraph, headings are used to help group the material and assist in quickly
finding tasks. Read all preliminary information found at the beginning of each task. After completing a task,
ALWAYS perform the follow-on maintenance at the end of the task.
(iv Blank)/iii
8. TM 5-2420-222-34
CHAPTER 1
INTRODUCTION
Section I. GENERAL INFORMATION
Paragraph Page
Number Paragraph Title Number
1-1 Scope ............................................................................................................................... 1-1
1-2 Maintenance Forms, Records, and Reports .................................................................... 1-1
1-3 Destruction of Army Materiel To Prevent Enemy Use...................................................... 1-1
1-4 Reporting Equipment Improvement Recommendations (EIRs) ....................................... 1-1
1-1. SCOPE.
This manual describes the troubleshooting and maintenance of the John Deere Model JD410 Wheeled Tractor
Loader Backhoe for Direct Support and General Support Maintenance mechanics.
1-2. MAINTENANCE FORMS, RECORDS, AND REPORTS.
Department of the Army forms and procedures used for equipment maintenance will be those prescribed by DA
Pam 738-750, The Army Maintenance Management System (TAMMS).
1-3. DESTRUCTION OF ARMY MATERIEL TO PREVENTENEMY USE.
For destruction of Army materiel to prevent enemy use, refer to TM 750-244-3.
1-4. REPORTING EQUIPMENT IMPROVEMENT RECOMMENDATIONS (EIRs).
If your loader backhoe needs improvement, let us know. Send us an EIR. You, the user, are the only one who
can tell us what you don’t like about your equipment. Let us know why you don’t like the design. Put it on an SF Form 368
(Product Quality Deficiency Report). Mail it to us at: Commander, U.S. Army Tank-Automotive Command, ATTN:
AMSTA-MP, Warren, Ml 48397-5000. We’ll send you a reply.
1-1
9. TM 5-2420-222-34
Section II. EQUIPMENT DESCRIPTION AND DATA
Paragraph Page
Number Paragraph Title Number
1-5 Differences Between Models ........................................................................................... 1-2
1-6 Equipment Data ............................................................................................................... 1-2
1-5. DIFFERENCES BETWEEN MODELS.
WARNING
Pay close attention to serial numbers when performing maintenance on this
equipment. Installation of Incorrect part numbers may result In Injury to personnel
or damage to equipment.
Although all loader backhoes covered in this manual have the same model number, there are differences in
configuration depending on the loader backhoe serial number. The two serial number breaks are 235786-235999 and
319995-342573. These two configurations differ primarily in transmission design and hydraulic line routing. Throughout
this manual, where differences in configuration or equipment affect the maintenance, they are shown in detail. If the
differences are minor or obvious, such as differences in exact appearance or location, and maintenance is not affected,
typical equipment is shown.
1-6. EQUIPMENT DATA.
Refer to TM 5-2420-222-10 for information on loader backhoe identification and data plates, major components,
and end item and component specifications.
1-2
11. TM 5-2420-222-34
3-3. ENGINE ASSEMBLY REPLACEMENT (Con’t).
NOTE
Loader backhoes with serial numbers 319995-342573 have washers.
Loader backhoes with serial numbers 235786-235999 do not have
washers.
22. Remove three screws (63), lockwashers (62), washers (61), accumulator bracket (60), and right bracket (46) from
engine assembly (39). Discard lockwashers.
23. Remove three screws (59), lockwashers (58), washers (57), and left bracket (46) from engine assembly (39). Discard
lockwashers.
b. INSTALLATION
NOTE
Loader backhoes with serial numbers 319995-342573 have washers.
Loader backhoes with serial numbers 235786-235999 do not have
washers.
1. Install left bracket (46) on engine assembly (39) with three screws (59), new lockwashers (58), and washers (57).
2. Install right bracket (46) and accumulator bracket (60) on engine assembly (39) with three screws (63), new
lockwashers (62), and washers (61). Torque screws (59 and 63) to 170 lb.-ft. (230 N•m).
TA701229
3-14
12. TM 5-2420-222-34
3-3. ENGINE ASSEMBLY REPLACEMENT (Con’t).
3. Install three “ in. -13 UNC threaded eyebolts (36) in lift points of cylinder head (38).
4. Position lifting device over engine assembly (39). Connect engine and transmission sling (37) to eyebolts (36)
and to lifting device.
WARNING
• Use extreme caution when handling heavy parts. Lifting device is required when parts weigh
over 50 lb (23 kg) for a single person lift, over 100 lb (45 kg) for a two person lift, and over
150 lb (68 kg) for a three or more person lift. Keep clear of heavy parts supported only by
lifting device. Failure to follow this warning may cause serious injury or death to personnel.
• Parts of clutch assembly will be coated with asbestos dust. Breathing this dust may be
hazardous to your health. Use an approved filter mask for use against asbestos dust. Never
use compressed air or a dry brush to clean these parts. Dust must be removed with an
industrial-type vacuum cleaner equipped with a high efficiency filter system.
5. Using lifting device, raise engine assembly (39) off engine stand or wood blocks and position over loader backhoe.
6. Install upper engine mount (49) and lower engine mount (54) in left and right brackets (46).
TA701230
3-15
13. TM 5-2420-222-34
3-3. ENGINE ASSEMBLY REPLACEMENT (Con’t).
7. With two assistants, lower lifting device until engine assembly (39) is alined with reverser housing (3). Move lifting
device rearward until engine assembly engages reverser housing.
8. Install two screws (47), new lockwashers (53), washers (48), and nuts (52) in left and right brackets (46).
9. Install two screws (56) and new lockwashers (55) in engine oil pan, flywheel housing (30) and reverser housing (3).
Torque screws to 250 lb.-ft. (339 Nom).
10. Install four screws (50) and washers (51) in flywheel housing (30) and reverser housing (3). Torque screws to 250 lb.-
ft. (339 N•m).
11. Position wood block under engine assembly (39). Remove lifting device, engine and transmission sling (37), and three
eyebolts (36) from engine assembly.
TA701231
3-16
14. TM 5-2420-222-34
3-3. ENGINE ASSEMBLY REPLACEMENT (Con’t).
12. Position front crossmember (35) in place on canopy. Install four screws (42), new lockwashers (43), and washers
(44).
13. Uncap tee (40) and remove plug from accumulator (45). Install pump pressure line-to-accumulator hose (41) to
TA701232
3-17
15. TM 5-2420-222-34
3-3. ENGINE ASSEMBLY REPLACEMENT (Con’t)
14. Install capillary tube (32) and water temperature sensor (34) in adapter (33). Tighten jamnut (31).
15. Install two screws (27) and new lockwashers (28) in flywheel housing (30) and cowl support (29).
TA701233
3-18
16. TM 5-2420-222-34
3-3. ENGINE ASSEMBLY REPLACEMENT (Con’t).
16. Install main wiring harness fuel shutoff lead (24) in place on engine block (22). Install new tie-down bands (23) on
main wiring harness fuel shutoff lead.
17. Position wiring harness terminal (26) in place on fuel injection pump shutoff solenoid terminal (17) and install new self-
locking nut (25).
18. Remove adhesive tape from speed control rod (18) and engine block (22). Position speed control rod and washer (20)
on shaft (19). Install new cotter pin (21) in shaft.
3-19
17. TM 5-2420-222-34
3-3. ENGINE ASSEMBLY REPLACEMENT (Con’t).
NOTE
Steps 19 and 20 apply only to loader backhoes with serial numbers 235786-235999.
19. Position engine starting aid fluid injection solenoid (8) and bracket (15) on solenoid bracket (9) and secure with
two screws (14), washers (10 and 13), new lockwashers (11), and nuts (12). Connect ground terminal (4) to
terminal (16).
20. Install solenoid lead terminal (6) on engine starting aid fluid injection solenoid terminals (5 and 7).
TA701235
3-20
18. TM 5-2420-222-34
3-3. ENGINE ASSEMBLY REPLACEMENT (Con’t).
21. Install tachometer drive cable (1) and new gasket (2) in reverser housing (3).
FOLLOW-ON TASKS:
• Connect starter (see TM5-2420-222-20).
• Connect alternator (see TM5-2420-222-20).
• Install right inner platform ramp (see TM5-2420-222-20).
• Install accumulator tee-to-steering valve oil line (see TM5-2420-222-20).
• Install electric horn and bracket (see TM5-2420-222-20).
• Install steering valve oil lines (see TM5-2420-222-20).
• Install muffler (see TM5-2420-222-20).
• Install frame assembly front support (see paragraph 12-1).
TA701236
3-21
19. TM 5-2420-222-34
3-4. ENGINE BLOCK MAINTENANCE.
This Task Covers:
a. Disassembly c. Repair
b. Cleaning and Inspectiond. d. Assembly
Initial Setup:
Equipment Conditions: Materials/Parts:
• Engine oil (Item 25, Appendix B)
NOTE • Rags (Item 28, Appendix B)
Perform the following only on loader backhoes • Dry cleaning solvent (Item 31,
equipped with engine coolant heater. Appendix B)
• Nonelectrical wire (Item 44,
Appendix B)
• One crankshaft
• Engine coolant heater hoses and fittings removed • One rear bearing
(see TM5-2420-222-20).
• Engine coolant heater removed (see TM5-2420-
222-20). Tools/Test Equipment:
NOTE • General mechanic's tool kit
Perform the following on all loader backhoes. • Field automotive shop set
• Engine assembly removed (see paragraph 3-3). Personnel Required: Two
• Cylinder block plate removed (see paragraph 3-7).
• Starter removed (see TM5-2420-222-20). General Safety Instructions:
• Lubricating cooler (engine oil cooler) removed (see • Dry cleaning solvent is flammable
TM 5-2420-222-20). and must not be used near open
• Flywheel housing removed (see paragraph 3-10). flame. Use only in a well ventilated •
Cylinder sleeves removed (see paragraph 3-5). area.
• Crankshaft removed (see paragraph 3-8). • Compressed air used for cleaning
• Liquid level gage removed (see TM 5-2420-222-20). purposes should never exceed 30
psi (207 kPa).
• Avoid contact with live steam.
a. DISASSEMBLY
1. Remove four pipe plugs (14) from engine block (1).
NOTE
For loader backhoes equipped with engine coolant heater, skip step 2.
2. Remove pipe plug (13) and draincock (12) from engine block (1).
CAUTION
Do not remove pins, Studs, plugs, or sleeve bushing In steps 3 through 7
unless damaged. Removal may damage parts.
3. Remove two pins (2 and 3) from engine block (1).
4. Remove two plugs (5) from engine block (1).
5. Using gear and bearing mechanical puller, remove sleeve bushing (6) from engine block (1).
6. Remove two pins (7) from engine block (1).
3-22
21. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
22. TM 5-2420-222-34
3-4. ENGINE BLOCK MAINTENANCE (Con’t).
7. Remove three studs (4) from engine block (1).
8. Remove side plug (8) from engine block (1).
9. Remove four fluid restrictors (11) from engine block (1).
10. Remove pipe plug (10) from engine block (1).
CAUTION
Do not remove pins unless damaged. Removal may damage parts.
11. Remove two pins (9) from engine block (1).
b. CLEANING AND INSPECTION
WARNING
Avoid contact with live steam. Live steam can burn skin, cause
blindness, and cause other serious Injury. Be sure to wear protective
apron, gloves, and safety goggles when using live steam.
1. Using steam cleaner, clean all internal passages and external holes and recesses of engine block free of corrosion,
scaling, and foreign matter.
WARNING
Compressed air used for cleaning or drying purposes, or for clearing
restrictions, should never exceed 30 psi (207 kPa). Wear protective
clothing (goggles/shield, gloves, etc.) and use caution to avoid Injury to
personnel.
2. Turn engine block so deposits will run out. Flush internal passages and external holes and recesses with clean water.
Dry engine block with compressed air.
WARNING
Dry cleaning solvent, P-D-680, is toxic and flammable. Always wear
protective goggles and gloves, and use only in a well-ventilated area.
Avoid contact with skin, eyes, and clothes, and DO NOT breathe vapors.
DO NOT use near open flame or excessive heat. The solvent’s flash point
is 100°F-138°F (38°C-59°C). If you become dizzy while using cleaning
solvent, immediately get fresh air and medical help. If solvent contacts
eyes, Immediately wash your eyes and get medical aid.
3. Remove all gasket material from gasket surfaces, then wipe clean with dry cleaning solvent and rags.
4. Clean all other metal parts with dry cleaning solvent, then dry with rags.
5. Clean four fluid restrictors with dry cleaning solvent. Clear oil passages with nonelectrical wire. Wipe dry.
3-24