Jin Huang seeks an engineering position in materials, polymers, or plastics. They have 4 years of experience in plastics manufacturing, chemicals application, and supporting new product design and R&D. Their skills include injection molding, root cause analysis, plastics processing, biopolymer application, design of experiments, AutoCAD, polymer extrusion, and troubleshooting. Past roles include manufacturing medical grade PVC tubing, improving chemicals performance through testing, and supporting the design of a sobriety sensor through research and computer-aided data analysis.

1. Jin Huang
1336 TABOR #C
Kettering, Ohio 45420 United States
(352) 665-3268
jinhuang1102@gmail.com
Objective
Obtain an engineering position in materials/polymer/plastics field; 4 years discipline in plastics manufacturing, chemicals
application, supported design of new products and R&D.
Skills / Abilities
Plastic Engineering
Injection molding
Root Causes Analysis
Plastics processing
Biopolymer application
Design of Experiment
Plastic Lab Equipment
Medical Grade Polymer
AutoCAD/MS office
Polymer Extrusion
Research and development
Troubleshooting
Accomplishment
 Manufacturing and Quality controls the medical grades PVC tubing; be proficient in polymer extruder and injection molding.
 Improved and confirmed chemicals performance in application by testing, managed project progress and prepared reports
 Supported design of a sobriety sensor; researched articles on problem solutions; gained computer-aided data analysis skills.
Relevant Experience
July 2013 – July 2014
Research Assistant, University of Florida – Department of Chemical Engineering, Gainesville, FL.
 Supported design of a sobriety sensor, based on a specific material property; developed a novel coating method for
scalable fabrication; Studied design of experiment, writing projects proposal and presentation skills.
 Collected and analyzed research articles to solve problems, researched and modified coating techniques; conducted
measurements for sobriety sensor: Provided optical analysis and mechanical resistance.
 Used computer techniques to conduct tests and verified engineering applications; utilized statistical techniques analysis
data to measure and calculate the experiment by using MATLAB/MS office.
September 2010 – June 2012
Manufacturing Engineer, Institute Chemistry in Chinese Academy of Science, & TCL Corporation, Beijing, China
 Utilized super-hydrophobic polymer for appliance improvement; Developed a flow coating method to reduce
manufacturing cycle. Restrained the frozen droplets in heat exchanger and improved the power efficiency of air conditioner.
 Ensured product performance by Identifying and selecting material to be used, troubleshoot products issues through root
causes analysis and determined products performance during the air conditioner operation and eliminated materials
waste.
 Collaborated with TCL appliance, managed product quality inspection, used statistical analysis to prepare reports; received
feedbacks, and transferred products technology to collaborator and processes to the operators.
July 2009 – June 2010
Polymer Engineer, Shenzhen Meishengda Medical Device Co., Ltd, Shenzhen, China
 Evaluated medical grade PVC tubing processes through product quality testing; applied knowledge of plastics components
design, selected processing equipment; Gained of using extruders, medical polymer testing and processing.
 Ensured different grades PVC tubing quality through testing; assured all extrusions do not contain any peroxides ; Evaluated
new plastics technologies; improved the products yield.
 Kept all extrusion processing equipment operational through coordinating with maintenance and repair crews; Established
procedures for twin extruders. Technically supported plastics manufacturing and quality controls.
Education
Master of Material Science and Engineering, University of Florida, Gainesville, FL
Bachelor of Polymer Science and Engineering, Beijing Technology and Business University, Beijing, China