This document provides information about torque settings for different types of fasteners used on JCB machines. It defines zinc plated fasteners and Dacromet fasteners, identifying them by colour and part number suffix. It provides tables with torque settings in Newton metres (Nm) for UNF and metric grade fasteners under condition 1 (unlubricated) and condition 2 (lubricated), noting that Dacromet fasteners have lower torque settings than zinc plated fasteners. It warns not to mix Dacromet and zinc plated fasteners.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
3. Page No.Contents
Section 1 - General Information
1-i 1-i
Introduction
About this Manual ...................................................................................... 1-1
Machine Description .................................................................................. 1-2
Identifying Your Machine ........................................................................... 1-7
Torque Settings
Zinc Plated Fasteners and Dacromet Fasteners ....................................... 1-9
Hydraulic Connections ............................................................................. 1-13
Service Tools
Numerical List .......................................................................................... 1-17
Tool Detail Reference .............................................................................. 1-20
Service Consumables
Sealing and Retaining Compounds ......................................................... 1-41
Terms and Definitions
Colour Coding .......................................................................................... 1-43
4. 1 19813/2000-02
Introduction
About this Manual
Machine Model and Serial Number
This manual provides information for the following
model(s) in the JCB machine range:
– JCB JS81 from serial number 1480500 to 1481999.
– JCB JS81 from serial number 1798936 to 1799936.
– JCB JS81 from serial number 2426501 to 2427000.
Using this Manual
T1-044
This manual is arranged to give you a good understanding
of the machine and its safe operation. It also contains
maintenance information and specification data. Read this
manual from front to back before using the machine for the
first time. Particular attention must be given to all the safety
aspects of operating and maintaining the machine.
If there is anything you are not sure about, ask your JCB
distributor or employer. Do not guess, you or others could
be killed or seriously injured.
General warnings in this chapter are repeated throughout
the book, as well as specific warnings. Read all the safety
statements regularly, so you do not forget them.
Remember that the best operators are the safest
operators.
The illustrations in this manual are for guidance only.
Where the machines differ, the text and or the illustration
will specify.
This manual contains original instructions, verified by the
manufacturer (or their authorised representative).
The manufacturer's policy is one of continuous
improvement. The right to change the specification of the
machine without notice is reserved. No responsibility will
be accepted for discrepancies which may occur between
specifications of the machine and the descriptions
contained in this publication.
All optional equipment included in this manual may not be
available in all territories.
Left Side, Right Side
In this manual, 'left' A and 'right' B mean your left and right
when you are seated correctly in the machine
K Fig 1. ( T 1).
T017280-2
Fig 1.
Cross References
T1-004_2
In this publication, page cross references are made by
presenting the subject title printed in bold, italic and
underlined. It is preceeded by the 'go to' symbol. The
number of the page upon which the subject begins, is
indicated within the brackets. For example: K Cross
References ( T 1).
A
B
5. Introduction
Machine Description
2 29813/2000-02
Machine Description
The JCB Tracked Excavator
The JCB Tracked Excavator is a self propelled machine
comprising a tracked undercarriage and a revolving upper
structure which incorporates a boom, dipper, bucket and
swing mechanism. It is mainly used for digging below
ground level with bucket motions towards the machine.
The upper structure can swing 360 degrees and discharge
material while the tracked undercarriage remains
stationary.
Intended Use
The machine is intended to be used under normal
conditions for the applications described in this manual. If
the machine is used for other purposes or in dangerous
environments, for example in a flammable atmosphere or
in areas with dust containing asbestos, special safety
regulations must be followed and the machine must be
equipped for use in these environments.
The machine is primarily designed for excavating with a
bucket, without movement of the undercarriage during the
work cycle. An excavator work cycle normally comprises
excavating, elevating, swinging and discharging of
material. An excavator can also be used for object or
material handling/transportation provided it meets the
lifting regulations.
6. Introduction
Machine Description
4 49813/2000-02
Main Component Locations
Fig 2.
Item Description
A Bucket
B Bucket link
C Bucket ram
D Dipper
E Dipper tank
F Dipper ram
G Boom
H Boom ram
J Operators cab
K Counterweight
L Undercarriage
7. Introduction
Identifying Your Machine
5 59813/2000-02
Identifying Your Machine
Machine Identification Plate
Your machine has an identification plate. The PIN (Product
Identification Number), weight, engine powler, year of
manufacture and serial number of the machine are shown
on the identification plate.
The machine serial number is also inscribed at the
baseplate of the rear frame.
Fig 3.
The machine model and build specification are indicated
by the PIN. The PIN has 17 digits and must be read from
left to right.
Table 1. Typical PIN
Table 2. Explanation of the PIN
Fig 4.
Item Description
A Identification plate (location)
B Serial number (inscribed)
JCB JS102 L XXXXXX
Digit Description
1 to 3 World manufacturer identification. (JCB)
4 to 8 Machine type and model. For example,
JS102 = JS330 Tracked.
9 Random check letter. The check letter is
used to verify the authenticity of a
machine's PIN.
10 to 17 Machine serial number.
Item Description
A Identification plate
JCB MANUFACTURING LTD.
TALEGAON,
DIST PUNE-410507
INDIA
MADE IN
INDIA
8. Introduction
Identifying Your Machine
6 69813/2000-02
Component Identification Plate
Engine
The engine data labels are attached to the cylinder block.
P041680-53
Fig 5.
ENGINE TYPE
ENGINE No.
RATING kW/hp rpm
RATINGSTD.
GOVERNING CLASS
KIRLOSKAR OIL ENGINES LTD
INDIA
ENGINE TYPE
RATING kW/hp RPM
RATING STD.
GOVERNING CLASS
ENGINE NO.
Enriching Lives
KIRLOSKAR OIL ENGINES
INDIA LTD
9. Section 1 - General Information
Torque Settings
Zinc Plated Fasteners and Dacromet Fasteners
1-7 1-79813/2000-02
Torque Settings
Zinc Plated Fasteners and Dacromet Fasteners
T11-002
Introduction
Some external fasteners on JCB machines are
manufactured using an improved type of corrosion
resistant finish. This type of finish is called Dacromet and
replaces the original Zinc and Yellow Plating used on
earlier machines.
The two types of fasteners can be readily identified by
colour and part number suffix. K Table 3. Fastener Types
( T 1-7).
Table 3. Fastener Types
Note: As the Dacromet fasteners have a lower torque
setting than the Zinc and Yellow fasteners, the torque
figures used must be relevant to the type of fastener.
Note: A Dacromet bolt should not be used in conjunction
with a Zinc or Yellow plated nut, as this could change the
torque characteristics of the torque setting further. For the
same reason, a Dacromet nut should not be used with a
Zinc or Yellow plated bolt.
Note: All bolts used on JCB machines are high tensile and
must not be replaced by bolts of a lesser tensile
specification.
Note: Dacromet bolts, due to their high corrosion
resistance are used in areas where rust could occur.
Dacromet bolts are only used for external applications.
They are not used in applications such as gearbox or
engine joint seams or internal applications.
Bolts and Screws
Use the following torque setting tables only where no
torque setting is specified in the text.
Note: Dacromet fasteners are lubricated as part of the
plating process, do not lubricate.
Torque settings are given for the following conditions:
Condition 1
– Un-lubricated fasteners
– Zinc fasteners
– Yellow plated fasteners
Condition 2
– Zinc flake (Dacromet) fasteners
– Lubricated zinc and yellow plated fasteners
– Where there is a natural lubrication. For example,
cast iron components
Verbus Ripp Bolts
Fig 6.
Torque settings for these bolts are determined by the
application. Refer to the relevant procedure for the
required settings.
Fastener
Type
Colour Part No. Suffix
Zinc and
Yellow
Golden finish 'Z' (e.g. 1315/3712Z)
Dacromet Mottled silver finish 'D' (e.g. 1315/3712D)
16. Section 1 - General Information
Torque Settings
Hydraulic Connections
1-14 1-149813/2000-02
'Torque Stop' Hose System
Fig 8.
`Torque Stop' Hoses 8-B screwed into adaptors 8-A seal
onto an 'O' ring 8-C which is compressed into a 45° seat
machined in the face of the adaptor port. To prevent the 'O'
ring being damages as a result of over tightening, 'Torque
Stop' Hoses have an additional shoulder 8-D, which acts
as a physical stop.
Note: Minimum dimension 8-E fixed by shoulder 8-D.
Table 14. BSP `Torque Stop' Hose - Torque Settings
BSP Hose Size Hexagon (A/F)
Nm kgf m lbf ftin. mm
1/8 14.0 14.0 1.4 10.0
1/4 19.0 27.0 2.7 20.0
3/8 22.0 40.0 4.1 30.0
1/2 27.0 55.0 5.6 40.0
5/8 30.0 65.0 6.6 48.0
3/4 32.0 95.0 9.7 70.0
1 38.0 120.0 12.2 89.0
1 1/4 50.0 189.0 19.3 140.0
1 1/2 55.0 244.0 24.9 180.0
17. Section 1 - General Information
Service Consumables
Sealing and Retaining Compounds
1-41 1-419813/2000-02
Service Consumables
Sealing and Retaining Compounds
T11-001_4
Table 15.
Type Description Part No. Quantity
JCB Multi-Gasket A medium strength sealant suitable for all sizes of
gasket flanges, and for hydraulic fittings of 25-65 mm
diameter.
4102/1212 50 ml
JCB High Strength Threadlocker A high strength locking fluid for use with threaded
components. Gasketing for all sizes of flange where
the strength of the joint is important.
4102/0551 50 ml
JCB Retainer (High Strength) For all retaining parts which are unlikely to be
dismantled.
4101/0601 10 ml
4101/0651 50 ml
JCB Threadlocker and Sealer A medium strength locking fluid for sealing and
retaining nuts, bolts, and screws up to 50 mm
diameter, and for hydraulic fittings up to 25 mm
diameter.
4101/0250 10 ml
4101/0251 50 ml
JCB Threadlocker and Sealer
(High Strength)
A high strength locking fluid for sealing and retaining
nuts, bolts, and screws up to 50 mm diameter, and
for hydraulic fittings up to 25 mm diameter.
4101/0550 10 ml
4101/0552 200 ml
JCB Threadseal A medium strength thread sealing compound. 4102/1951 50 ml
JCB Activator A cleaning primer which speeds the curing rate of
anaerobic products.
4104/0251 200 ml (Aerosol)
4104/0253 1 ltr (Bottle)
JCB Cleaner/Degreaser For degreasing components prior to use of
anaerobic adhesives and sealants.
4104/1557 400 ml (Aerosol)
Direct Glazing Kit For one pane of glass; comprises of:
– 1 x Ultra Fast Adhesive (310 ml)
– 1 x Active Wipe 205 (30 ml)
– 1 x Black Primer 206J (30 ml)
– plus applicator nozzle etc.
993/55700
Ultra Fast Adhesive For direct glazing. 4103/2109 310 ml
Active Wipe 205 For direct glazing. 4104/1203 250 ml
Black Primer 206J For direct glazing. 4201/4906 30 ml
Clear Silicone Sealant To seal butt jointed glass. 4102/0901
Plastic to Metal Bonder To seal plastic to metal joints. 4103/0956 50 g
Black Polyurethane Sealant To finish exposed edges of laminated glass. 4102/2309 310 ml
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. Section 1 - General Information
1-43 1-439813/2000-02
Service Tools
Numerical List
The tools listed in the table are special tools required for
carrying out the procedures described in this manual.
These tools are available from JCB Service.
Some tools are available as kits or sets, the part numbers
for parts within such kits or sets are not listed here. For full
details of all tools, including the content of kits and sets,
refer to Tool Detail Reference, Section 1.
Note: Tools other than those listed will be required. It is
expected that such general tools will be available in any
well equipped workshop or be available locally from any
good tool supplier.
Part
Number
Description See Section
993/68100 Slide Hammer Kit - see Tool Detail Reference (Section 1) for content B
- Rivet Nut Tool - see Tool Detail Reference (Section 1) B
892/00842 Glass Lifter B
892/00843 Folding Stand for Holding Glass B
892/00845 Cartridge Gun B
892/00846 Glass Extractor (Handles) B
892/00847 Nylon Spatula B
892/00848 Wire Starter B
892/00849 Braided Cutting Wire B
926/15500 Rubber Spacer Blocks B
992/12300 12V Mobile Oven B
992/12400 240V Static Oven (2 Cartridge) B
992/12800 Cut-Out Knife B
992/12801 'L' Blades B
4104/1310 Hand Cleaner B
892/00281 AVO Meter (not illustrated) C
892/00298 Fluke Meter C
892/00285 Hyd. Oil Temperature Probe C
892/00284 Digital Tachometer C
892/01174 DLA Kit C
331/22966 Pump Drive Alignment Tool (not illustrated) E
- Male Adapters - BSP x BSP - see Tool Detail Reference (Section 1) E
- Male Adapters - BSP x NPT (USA only) - see Tool Detail Reference (Section 1) E
- Pressure Test Points - Adaptors - see Tool Detail Reference (Section 1) E
- Pressure Test Points - 'T' Adaptors - see Tool Detail Reference (Section 1) E
- 'T' Adaptors - see Tool Detail Reference (Section 1) E
20. Section 1 - General Information
Service Tools
Numerical List
1-44 1-449813/2000-02
- Female Blanking Caps - see Tool Detail Reference (Section 1) E
- Male Cone Blanking Caps - see Tool Detail Reference (Section 1) E
- Female Connectors - see Tool Detail Reference (Section 1) E
- Bonded Washers - see Tool Detail Reference (Section 1) E
- Ram Protection Sleeves - see Tool Detail Reference (Section 1) E
892/00334 Ram Seal Fitting Tool E
Hexagon Spanners - see Tool Detail Reference (Section 1) E
892/01027 Piston Seal Assembly Tool E
- Hydraulic Flow Test Equipment - see Tool Detail Reference (Section 1) E
- Hydraulic Circuit Pressure Test Kit - see Tool Detail Reference (Section 1) for content E
- Hydraulic Hand Pump Equipment - see Tool Detail Reference (Section 1) E
992/10100 Spool Clamp E
892/00039 Spool Clamp E
992/02800 ARV Extractor E
331/31069 Test Block for A.R.V. E
892/00891 Valve Spool Seal Fitting Tool E
892/00346 Gauge E
892/00279 Gauge E
892/00280 Gauge E
892/00347 Connector E
892/00254 Hose E
- Ram Jigs - see Tool Detail Reference (Section 1) E
- Ram Piston Nut Spanners - see Tool Detail Reference (Section 1) E
- Socket Box Wrench E
- Nut Adapter E
- Seal Ring Tool E
- Stopper E
- Bearing Rig E
- Inserting Seal Ring and Correction Jig - see Tool Detail Reference (Section 1) E
- Jig for Pulling Out, Press-fitting Bushing - see Tool Detail Reference (Section 1) E
- Jig for Press-fitting Wiper Ring - see Tool Detail Reference (Section 1) E
- Jig for Inserting Cylinder Head - see Tool Detail Reference (Section 1) E
- Seal Ring and Connector Jig - see Tool Detail Reference (Section 1) E
- Bush Removal Jig - see Tool Detail Reference (Section 1) E
- Bush Fitting Jig - see Tool Detail Reference (Section 1) E
- Wiper Ring Fitting Jig - see Tool Detail Reference (Section 1) E
- Wiper Ring Fitting Jig - see Tool Detail Reference (Section 1) E
892/00041 De-glazing Tool K
Part
Number
Description See Section
21. Section 1 - General Information
Service Tools
Tool Detail Reference
1-45 1-459813/2000-02
Tool Detail Reference
Section B - Body and Framework
Note: Not all service tools are illustrated.
Fig 9. 993/68100 Slide Hammer Kit
1 993/68101 Slide Hammer 7 993/68107 Bar - M20 x M20 X 800 mm
2 993/68102 End Stops 8 993/68108 Adaptor - M20 x 7/8" UNF
3 993/68103 Adaptor - M20 x 5/8" UNF 9 993/68109 Adaptor - M20 x M12
4 993/68104 Adaptor - M20 x 1" UNF 10 993/68110 Adaptor - M20 x 5/8" UNF (Shoulder)
5 993/68105 Adaptor - M20 x M20 11 993/68111 Adaptor - M20 x 1/2" UNF
6 993/68106 Adaptor - M20 x M24
Fig 10. Rivet Nut Tool
1 826/01099 M6 x 16 mm Rivet Nut
826/01101 M6 x 19 mm Rivet Nut
826/01102 M8 x 18 mm Rivet Nut
826/01103 M8 x 21 mm Rivet Nut
826/01104 M10 x 23 mm Rivet Nut
826/01105A M10 x 26 mm Rivet Nut
2 - Installation Tool available from: Bollhoff
Fastenings Ltd (www.bollhof.com)