Learn why monitoring your Mercedes' Exhaust Back Pressure (EBP) sensor is crucial. Understand its role in engine performance and emission reduction. Discover five warning signs of EBP sensor failure, from loss of power to increased emissions. Take action promptly to avoid costly repairs and maintain your Mercedes' reliability and efficiency.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Your VW's camshaft position sensor is crucial for engine performance. Signs of failure include engine misfires, difficulty starting, stalling at low speeds, reduced fuel efficiency, and the check engine light. Prompt inspection and replacement can prevent further damage and keep your VW running smoothly.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
How To Fix The Key Not Detected Issue In Mercedes CarsIntegrity Motorcar
Experiencing a "Key Not Detected" problem in your Mercedes? Don’t take it for granted. Go through this presentation to find out the exact nature of the issue you are dealing with. Have your vehicle checked by a certified professional if necessary.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. Section F2 - Transmission
Wheels and Tyres
Removal and Replacement
F2-4 F2-4F-02-03 Issue 01
Removal and Replacement
Front Wheels
Important: The wheel and tyre assembly is heavy. Get the
aid of one more person to remove and replace a wheel.
!MWARNING
A raised and badly supported machine can fall on you.
Position the machine on a firm, level surface before
raising one end. Ensure the other end is securely
chocked. Do not rely solely on the machine hydraulics
or jacks to support the machine when working under
it.
Disconnect the battery, to prevent the engine being
started while you are beneath the machine.
GEN-1-1
Removal (one wheel)
1 Park the machine and make it safe. Fit the boom
safety strut. Obey the care and safety procedures.
K Related Topics ( T F2-2)
2 Make sure that the engine cannot be started.
3 Put chocks A under the rear wheels.
4 Loosen the five wheel nuts B by half a turn.
5 Put a jack C under the axle arm. Use the correct jack.
6 Use the jack to lift the machine until the front wheel D
is off the ground.
7 Put chocks E under the axle arm.
8 Hold the wheel D and remove the wheel nuts B.
9 Remove the wheel.
Replacement
Note: Make sure that the mating surfaces of the wheel and
axle hub are clean.
!MWARNING
If, for whatever reason, a wheel stud is renewed, all the
studs for that wheel must be changed as a set, since
the remaining studs may have been damaged.
2-3-2-8
Replacement is the opposite of the removal procedure.
During the replacement procedure do this work also:
– Torque tighten the nuts B.
When the replacement procedure is complete:
– Check the wheel nut torques are correct after every
two hours of machine operation until they stay
correct.
Table 3. Torque Settings
C045590
Fig 1.
Item Nm kgf m lbf ft
B(1)
(1) 550-80 machines
650 66 480
B(2)
(2) Other machines
680 69 500
3. Section F2 - Transmission
Wheels and Tyres
Removal and Replacement
F2-5 F2-5F-02-03 Issue 01
Rear Wheels
Important: The wheel and tyre assembly is heavy. Get the
aid of one more person to remove and replace a wheel.
!MWARNING
A raised and badly supported machine can fall on you.
Position the machine on a firm, level surface before
raising one end. Ensure the other end is securely
chocked. Do not rely solely on the machine hydraulics
or jacks to support the machine when working under
it.
Disconnect the battery, to prevent the engine being
started while you are beneath the machine.
GEN-1-1
Removal (one wheel)
1 Park the machine and make it safe. Fit the boom
safety strut. Obey the care and safety procedures.
K Related Topics ( T F2-2)
2 Make sure that the engine cannot be started.
3 Put chocks A under the front wheels.
4 Loosen the five wheel nuts B by half of one turn.
5 Put a jack C under the centre of the rear axle. Use the
correct jack.
6 Use the jack to lift the machine until both rear wheels
are off the ground.
7 Put chocks E under each end of the rear axle.
8 Hold the wheel D and remove the wheel nuts.
9 Remove the wheel.
Replacement
Note: Make sure that the mating surfaces of the wheel and
axle hub are clean.
!MWARNING
If, for whatever reason, a wheel stud is renewed, all the
studs for that wheel must be changed as a set, since
the remaining studs may have been damaged.
2-3-2-8
Replacement is the opposite of the removal procedure.
During the replacement procedure do this work also:
– Torque tighten the nuts B.
When the replacement procedure is complete:
– Check the wheel nut torques are correct after every
two hours of machine operation until they stay
correct.
Table 4. Torque Settings
C045590
Fig 2.
Item Nm kgf m lbf ft
B(1)
(1) 550-80 machines
650 66 480
B(2)
(2) Other machines
680 69 500
4. Section F2 - Transmission
Wheels and Tyres
Removal and Replacement
F2-6 F2-6F-02-03 Issue 01
Wheel Studs
Removal and Replacement
The procedures that follow are for one wheel stud. The
procedures are the same for all the wheel studs.
!MWARNING
If, for whatever reason, a wheel stud is renewed, all the
studs for that wheel must be changed as a set, since
the remaining studs may have been damaged.
2-3-2-8
Removal
1 Remove the wheel from the hub. K Front
Wheels ( T F2-4) K Rear Wheels ( T F2-5)
2 Push out the wheel stud 3-A.
Important: Remove all the wheel studs 3-A and discard
them.
C045650
Fig 3.
Replacement
Important: Examine the wheel stud holes 4-B in the hub
carrier 4-C. If the holes are defective do not use the hub
carrier. Replace the hub carrier with a new one. Refer to
Applications for related axle topics. K Related
Topics ( T F2-2)
1 Put the stud 4-A into the hub carrier hole.
2 Use a nut and washer to pull in the stud 4-A into the
hub carrier 4-C.
3 Examine the stud and make sure it is correctly
installed. If the stud is loose replace the hub carrier 4-
C. Refer to Applications for related axle topics.
K Related Topics ( T F2-2)
C045650-C1
Fig 4.
5. Section F3 - Transmission
Front Axles
Introduction
F3-1 F3-1F-03-10 Issue 01
Front Axles
Introduction
Table 1. Procedure and Specification Variants
This topic contains information about a machine DEVICE. Make sure you are referring to the correct device. Refer to the
applications table.
Descriptions and procedures relate to the device and not related systems. For information about the systems refer to the
relevant topics.
This topic is intended to help you understand what the device does and how it works. Where applicable it also includes
procedures such as removal and replacement and dismantle and assemble.
K Related Topics ( T F3-2)
K Specifications ( T F3-3)
K SD80 3 Piece Steer Drive Axle ( T F3-3)
K Component Identification ( T F3-4)
K Renewing the Pinion Oil Seal ( T F3-6)
K Removal and Replacement - SD80 Fixed Axle ( T F3-7)
K Removal and Replacement - SD80 Pivot Sway Axle ( T F3-9)(1)
(1) Procedure variant. Make sure you refer to the correct procedure.
K Removal and Replacement - SD80 Trunnion Sway Axle ( T F3-12)(1)
K Dismantle, Inspection and Assembly ( T F3-15)
Procedures, Specifications(1)
(1) The table lists procedure and specification variants and the applicable machine models. Use the table to make sure
you refer to the correct information.
Machine Model Application
540-170
5AF
550-140
5AG
540-140
5AL
550-170
5AM
535-125
HiViz
5AN
535-140
HiViz
5AP
540-200
K Removal and Replacement - SD80 Pivot
Sway Axle ( T F3-9)
K Removal and Replacement - SD80
Trunnion Sway Axle ( T F3-12)
6. Section F3 - Transmission
Front Axles
Related Topics
F3-2 F3-2F-03-10 Issue 01
Related Topics
Table 2. Related Topics in This Publication
Table 3. Related Topics in Publication 9803/8610, Transmissions
The table lists other topics in the manual that contain information related to this topic. Refer to the applicable
topics to complete your procedures. Where applicable the text in this section contains cross references to this
page to help you find the correct information. Some machines have different systems and devices. Make sure
you refer to the correct topic, refer to Section 1 - Applications.
Sections Topic Titles Sub Titles
1 Applications ALL
2 ALL (Care and Safety)(1)
(1) You must obey all of the relevant care and safety procedures.
ALL
3 Maintenance ALL
F Applications ALL
F Rear Axles Renewing the Pinion Oil Seal
G Service Brakes SYSTEM Bleeding
H Steering SYSTEM Bleeding
H Steering SYSTEM Re-Phasing
The table lists topics in another manual that contain information related to this topic. Refer to the applicable
topics to complete your procedures. Where applicable the text in this section contains cross references to this
page to help you find the correct information. Some machines have different systems and devices. Make sure
you refer to the correct topics, refer to Designations. K Specifications ( T F3-3)
Sections Section Titles Topic Titles
A Axle Hubs 80 Series Hub
B Axle Hub Swivels and Driveshafts 55 Series Hub Swivel and Driveshaft
C Axle Integral Brakes 70 Series Integral Brakes (3 Piece Axles)
D Axle Drive Heads 80 Series Drive Heads (3 Piece Axles)
7. Section F3 - Transmission
Front Axles
Specifications
F3-3 F3-3F-03-10 Issue 01
Specifications
The axle serial number is stamped on the unit identification
plate A as shown.
Fig 1.
Note: It is essential that the correct ratio axle in
relationship to the gearbox ratio is fitted to the machine. Do
not fit a new axle with a different ratio to the axle being
replaced.
Table 4. SD80 3 Piece Steer Drive Axle
Designations
Hubs 80 Series
Hub swivels and drive shafts 55 Series
Drive head 80 Series 3 piece
Brakes 70 Series Integral Brakes (3 Piece Axles)
Type JCB spiral bevel input with epicyclic hub reduction
Brakes Oil immersed multi-plate discs, located in centre section
Steering Steer rams or power track rod
8. Section F3 - Transmission
Front Axles
Component Identification
F3-4 F3-4F-03-10 Issue 01
Component Identification
The illustration shows a typical 3 piece steer drive front
axle. K Fig 2. ( T F3-5)
The front axle consists of a centre casing (drivehead) and
two axle arms and swivel wheel hubs.
The drivehead houses the differential gearing and two oil-
immersed disc brake units.
The axle arms house the driveshafts. Specially shaped
spider gears in the differential provide `torque
proportioning'. This means that drive power will be kept on
one wheel if the other is slipping.
The wheel hubs are connected to the halfshafts through
universal joints which drive sun-and-planet gears inside
the hubs.
A Yoke connection to propshaft
B Pinion
C Crownwheel
D Differential unit
Note: Items A, B, C and D form the `drive head' part of
the axle.
E Drive shaft
F Universal coupling
G Reduction gear hub
H Steer swivel trunnion bearings
L Inboard oil-immersed multi-plate disc brakes
M Brake actuating piston
N Hydraulic brake lines
10. Section F3 - Transmission
Front Axles
Renewing the Pinion Oil Seal
F3-6 F3-6F-03-10 Issue 01
Renewing the Pinion Oil Seal
The front axle pinion oil seal is renewed using the same
procedure as described for the rear axles. K Related
Topics ( T F3-2)
11. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Fixed Axle
F3-7 F3-7F-03-10 Issue 01
Removal and Replacement - SD80 Fixed Axle
!MWARNING
A raised and badly supported machine can fall on you.
Position the machine on a firm, level surface before
raising one end. Ensure the other end is securely
chocked. Do not rely solely on the machine hydraulics
or jacks to support the machine when working under
it.
Disconnect the battery, to prevent the engine being
started while you are beneath the machine.
GEN-1-1
If the boom is raised, make sure the maintenance strut is
fitted. Obey the care and safety procedures. K Related
Topics ( T F3-2)
K Fig 3. ( T F3-8)
Note: Some machines may have shims installed on the
axle mounts. Make sure to note the position and quantity
of these shims before removal. Make sure to retain the
shims and replace them in the correct position when
replacing the axle. There may be an uneven number of
shims between each side of the axle as the shims are used
to adjust the machine height and make it level.
Removal
1 Disconnect the propshaft coupling from the axle by
unscrewing bolts A.
!MWARNING
When the driveshaft is disconnected the park brake
will no longer function. The machine must be securely
blocked to prevent any machine movement before
disconnecting the driveshaft.
TRANS-1-3
2 Disconnect and plug the hydraulic hoses to the steer
rams/ power track rod.
3 Slacken off the roadwheel retaining nuts C then raise
and support the front end of the machine on axle
stands or blocks positioned under the chassis.
Remove the front roadwheels.
4 Remove the front mudguards. Undo the bracket
retaining nuts E at the steering trunnions.
5 Disconnect the brake hose at the axle. Blank off the
exposed connections.
6 Uncouple the steer proximity switch electrical
connector (if fitted).
7 Support the axle on a trolley jack.
8 Unscrew axle mounting nuts D and remove the bolts
and washers.
9 Lower the axle down from the machine.
10 Remove the axle from the machine.
Replacement
Replacement is the opposite of the removal procedure.
During replacement do this work also:
– Bleed the brake system, see Section G - Brakes.
K Related Topics ( T F3-2)
– Refit the road wheels and carry out the tightness
checks as detailed in Section 3 - Routine
Maintenance. K Related Topics ( T F3-2)
– Bleed the steering system, see Section H - Steering.
K Related Topics ( T F3-2)
– Re-phase the steering system, see Section H -
Steering. K Related Topics ( T F3-2)
– Grease the axle pivot trunnions.
Table 5. Torque Settings
Item Nm kgf m lbf ft
A 78 8 57
B 56 5.7 41
C 680 69 500
D (1)
(1) Dry nuts.
969 99 715
D (2)
(2) Nuts with special dry lubricating film.
600 60 440
E 98 10 72
12. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Fixed Axle
F3-8 F3-8F-03-10 Issue 01
Fig 3. SD80 Fixed Axle
E
B
C
A
D
13. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Pivot Sway Axle
F3-9 F3-9F-03-10 Issue 01
Removal and Replacement - SD80 Pivot Sway Axle
!MWARNING
A raised and badly supported machine can fall on you.
Position the machine on a firm, level surface before
raising one end. Ensure the other end is securely
chocked. Do not rely solely on the machine hydraulics
or jacks to support the machine when working under
it.
Disconnect the battery, to prevent the engine being
started while you are beneath the machine.
GEN-1-1
If the boom is raised, make sure the maintenance strut is
fitted. Obey the care and safety procedures.K Related
Topics ( T F3-2)
Removal K Fig 5. ( T F3-11)
Removal
1 Disconnect the propshaft coupling from the axle by
unscrewing bolts A.
!MWARNING
When the driveshaft is disconnected the park brake
will no longer function. The machine must be securely
blocked to prevent any machine movement before
disconnecting the driveshaft.
TRANS-1-3
2 Disconnect and plug the hydraulic hoses to the steer
rams.
3 Slacken off the roadwheel retaining nuts C then raise
and support the front end of the machine on support
stands or blocks positioned under the chassis.
Remove the front roadwheels.
4 Remove the front mudguards. Undo the bracket
retaining nuts K at the steering trunnions.
5 Disconnect the brake hose at the axle. Blank off the
exposed connections.
6 Uncouple the steer proximity switch electrical
connector (if fitted).
7 Undo bolt D and remove pivot pin E.
8 Undo the sway ram pivot bracket mounting bolts H.
Lift away the bracket.
9 Support the axle on a trolley jack.
10 Undo bolt F and remove pivot pin G.
11 Remove the axle from the machine.
Replacement
Replacing is generally the reverse of the removal
sequence.
Replacement is the opposite of the removal procedure.
During replacement do this work also:
– Bleed the brake system, see Section G - Brakes.
K Related Topics ( T F3-2)
– Adjust the sway sight rod M so that the top of the rod
is in line with the top of the tube L when the machine
is horizontal. To adjust this slacken the locknuts N and
screw the sight rod up or down to the correct position.
Tighten the locknuts when the position is correct.
K Fig 4. ( T F3-10)
– Refit the road wheels and carry out the tightness
checks as detailed in Section 3 - Routine
Maintenance. K Related Topics ( T F3-2)
– Bleed the steering system, see Section H - Steering.
K Related Topics ( T F3-2)
– Re-phase the steering system, see Section H -
Steering. K Related Topics ( T F3-2)
– Grease the axle pivot trunnions.
14. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Pivot Sway Axle
F3-10 F3-10F-03-10 Issue 01
C127500
Fig 4.
Table 6. Torque Settings
Item Nm kgf m lbf ft
A 78 8 57
B 56 5.7 41
C 680 69 500
H 969 99 715
K 98 10 72
L
M
N
N
15. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Pivot Sway Axle
F3-11 F3-11F-03-10 Issue 01
Fig 5. SD80 Pivot Sway Axle
K
E
D
G
J
A
B
F
H
C
16. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Trunnion Sway Axle
F3-12 F3-12F-03-10 Issue 01
Removal and Replacement - SD80 Trunnion Sway Axle
!MWARNING
A raised and badly supported machine can fall on you.
Position the machine on a firm, level surface before
raising one end. Ensure the other end is securely
chocked. Do not rely solely on the machine hydraulics
or jacks to support the machine when working under
it.
Disconnect the battery, to prevent the engine being
started while you are beneath the machine.
GEN-1-1
If the boom is raised, make sure the maintenance strut is
fitted. Obey the care and safety procedures.K Related
Topics ( T F3-2)
Removal
1 Disconnect the propshaft coupling from the axle by
unscrewing bolts A.
!MWARNING
When the driveshaft is disconnected the park brake
will no longer function. The machine must be securely
blocked to prevent any machine movement before
disconnecting the driveshaft.
TRANS-1-3
2 Disconnect and plug the hydraulic hoses G to the
power track rod.
3 Slacken off the roadwheel retaining nuts then raise
and support the front end of the machine on support
stands or blocks positioned under the chassis.
Remove the front roadwheels.
4 Remove the front mudguards. Undo the bracket
retaining nuts F at the steering trunnions.
5 Disconnect the brake hose at the axle. Blank off the
exposed connections.
6 Uncouple the steer proximity switch K electrical
connector (if fitted).
7 Undo bolt D and remove pivot pin E.
8 Undo the sway ram pivot bracket mounting bolts H.
Lift away the bracket.
Fig 6.
9 Remove the access plate screws M and lift off the
plate N to get access to the front trunnion bolts.
10 Support the axle on a trolley jack.
11 Undo the six trunnion bolts B and nuts C. The top of
the bolts can be accessed from underneath the boom
as shown at L and below the access cover N.
12 Remove the axle from the machine. Be sure to
retrieve dowels J. If shims are fitted record their
positions. Use some wire to tie the trunnions to the
axle.
C053980
L
M
N
17. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Trunnion Sway Axle
F3-13 F3-13F-03-10 Issue 01
Replacement
Replacement is the opposite of the removal procedure.
During replacement do this work also:
– Bleed the brake system, see Section G - Brakes.
K Related Topics ( T F3-2)
– Adjust the sway sight rod Y so that the top of the rod
is in line with the top of the tube X when the machine
is horizontal. To adjust this slacken the locknuts Z and
screw the sight rod up or down to the correct position.
Tighten the locknuts when the position is correct.
K Fig 7. ( T F3-13)
– Make sure you re-fit dowels J together with any shims
in their original positions.
– Make sure that the axle oscillates freely before final
tightening of the fixing bolts.
– Refit the road wheels and carry out the tightness
checks as detailed in Section 3 - Routine
Maintenance. K Related Topics ( T F3-2)
– Bleed the steering system, see Section H - Steering.
K Related Topics ( T F3-2)
– Re-phase the steering system, see Section H -
Steering. K Related Topics ( T F3-2)
– Grease the axle pivot trunnions.
C127500-C1
Fig 7.
Table 7. Torque Settings
Item Nm kgf m lbf ft
A 78 8 57
B 476 48 352
C 476 48 352
H 600 60 440
F 98 10 72
X
Y
Z
Z
18. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
19. Section F3 - Transmission
Front Axles
Removal and Replacement - SD80 Trunnion Sway Axle
F3-14 F3-14F-03-10 Issue 01
Fig 8. SD80 Trunnion Axle
A312090-C2
F
D
B
G
G J
J
C
J
J
E
K
H
A
A
20. Section F3 - Transmission
Front Axles
Dismantle, Inspection and Assembly
F3-15 F3-15F-03-10 Issue 01
Dismantle, Inspection and Assembly
Make sure that you identify the axle sub-assemblies
designations correctly. K Specifications ( T F3-3)
The procedures for dismantling, inspection and assembly
are described in the Transmissions Service Manual.
K Related Topics ( T F3-2)