Iwiss Plier Tools, Plier Wrench, Plier Sets
•
0 likes•359 views
Iwiss Plier Tools including Slip joint pliers, Groove joint pliers, with quality chrome, vanadium steel forged, best cost utility, craftsmanship, high-quality steel forging.
Report
Share
Report
Share
Download to read offline
Recommended
PEX Pipe Tools
PEX pipe tools are tools that are used to install and repair PEX pipes in plumbing and heating systems. PEX pipes are flexible plastic pipes that are resistant to corrosion, scaling, and freezing. They are widely used in residential and commercial applications because they are easy to work with, durable, and cost-effective.
There are different types of PEX pipe tools that are required for different stages of PEX pipe installation and maintenance. Some of the most common PEX pipe tools are:
1.PEX cutter tool: This tool allows you to cut PEX pipes to the desired length. It is important to use a sharp and clean cutter tool to avoid damaging the pipe or creating burrs that can affect the flow of water. A PEX cutter tool can be either manual or automatic.
2.PEX crimping tool: This tool is used to secure a copper crimp ring into place over the PEX pipe and the fitting. A crimp ring is a metal ring that creates a tight seal between the pipe and the fitting. A PEX crimping tool can be either manual or hydraulic. There are different sizes and shapes of crimping tools for different types of crimp rings and fittings.
3.PEX crimp ring remover tool: This tool is used to remove already installed copper crimp rings from the PEX pipe and the fitting. This tool is useful when you need to replace or repair a PEX pipe or a fitting. A PEX crimp ring remover tool can be either manual or hydraulic.
4.PEX expander tool: This tool is used to expand the PEX pipe before inserting a fitting. An expander tool is a device that has a cone-shaped head that rotates inside the pipe and stretches it. This creates a larger opening for the fitting and a tighter connection. A PEX expander tool can be either manual or electric.
Automotive Electrical Wiring Hand Crimping Pliers
Automotive electrical wiring crimping pliers are tools that are used to create secure and reliable connections between wires and terminals in vehicles. They are designed to crimp insulated and non-insulated terminals, open barrel terminals, connectors, and ferrules with different sizes and shapes. Crimping pliers can also cut, strip, and grip wires with ease and precision.
There are different types of crimping pliers available in the market, such as ratcheting, hydraulic, self-adjusting, and angled. Each type has its own advantages and disadvantages, depending on the application and preference of the user. Some crimping pliers come with interchangeable nose pliers, which allow the user to switch between different crimping profiles. Some crimping pliers also have ergonomic handles, which provide comfort and reduce fatigue.
Wire Cutting & Stripping
Among a series of coordinated operations involved in making an electrical connection, cable cutting, and stripping are the initial and important preparation steps.
Proper preparation ensures high-quality connections. Our tools are in your good hands.
The first step, cutting. The cable must be cut cleanly, straightly without great effort. IWISS with its sub-brand iCrimp offers a variety of cutters to cover a range from thin fine-wire conductor to large diameter power supply cables. The cutters achieve the basic requirements of a quality cutting tool, for example:
*Made of premium steel, cutting edges stay sharp with no fraying.
*Ergonomic handle design brings a comfortable operation
*Ratcheting mechanism makes large size cable cutting effortless
The second step, stripping, the proper removal of the sheath brings high quality conductive connections. The cable must be stripped to the proper length without damages. Stripping can be super easy and fast when you get a suitable stripper. Our tools are designed to make it easy to get quick and clean stripping for cables of different sizes and materials. There is two basic strippers for your choice:
1. Stripping pliers with multiple stripping holes. Sharp blades and precise design in diameter provide a clean strip without damage to the conductor.
2. Self-adjusting insulation strippers are ideal for cable in different materials. The stripping depth can be adjusted according to cable diameter, and sheath thickness. It reduces the risk of damage to the conductor.
Besides, we manufactured various versatile strippers to help people to get more work done at less cost.
Zip Tie Gun
Zip tie, also known as wire tie, cable tie, is a typical fastener for holding items together. With high strength, high-temperature resistance, and chemical resistance, zip tie offers an ideal fixing solution for use in harsh environments. It appears in production line facilities, aircraft, power plants, mines, commercial kitchens, tunnels, oil and gas platforms, and wiring systems.
In the market, there are two main types of cable tie are widely used, stainless steel zip ties and nylon cable ties.
First one, nylon cable ties are made of primary nylon material, which keeps the cost down and easy to work with. It has a flexible tape section with teeth that engage with a pawl in the head to form a ratchet.
Stainless steel tie is made of stainless steel. It is durable and high strength for long-term service, its sharp edge may cause injuries to hands.
Designed for batch operations with zip ties, IWISS covers a full selection of zip tie guns. Featured with
1. Built-in cutter provides neat installation and speeds up the workflow.
2.Solid construction supports long-term using.
3.Advanced design makes every tying reliable, with no injuries to hands.
4.Tight lock, will not stretch or slide.
Wire Rope
Swaging is a method of securing wire rope with fittings like aluminum sleeves and stainless steel tension swage studs. The connection will exceed the rated breaking strength of the wire rope or cable when properly applied. Therefore,swaging is widely used to accomplish tasks of light-duty projects and industrial applications. The proper swaging connections require quality sleeve,corresponding wire rope, and correct swaging tool. IWISS with its sub-brand iCrimp offers a series of swaging tools for virtually any type of swaging connections, from wire rope cutter, manual swager, bench mounted swager, to pneumatic swaging machine. The tools offer all key features of modern tools, such as:
1. Made of premium steel, the tools are high strength durable for long service life. With special surface treatment, the tools achieve a high degree of water proof, and corrosion-resistant
2. Accurate hole design and well-polished jaws makes every connection perfect with virtually all sleeve and wire rope in the market
3. Adjustable function makes tight and trust- worth connection even after a long time using.
4. Ergonomic handle ensures optimal force-transmission and anti-fatigue operation.
IWISS tools are designed to make connections much easier. We insist on innovation and released new style swaging tools in the past years. We don’t follow the trend, but we lead it.
Solar PV
Renewable energy will become progressively more important as time goes on. Convert light to electricity, solar power is an essential part of renewable energy supplies. In the past decades, due to the solar panel system is high performance and low-carbon,people carried extensive researches and have developed many applications on solar power, the cost of solar electricity is keeping falling. It reduces the use of fossil fuels and solves the issue of families in remote areas with stable and inexpensive electricity.The return of the photovoltaic system depends much on the number of solar connections. All solar connections must be installed properly and tightly for long-term resistance to extreme weather. To help people with the solar project, IWISS offers a wide selection of solar tools in single and in kits. Solar tool kit enables professional and efficient work with solar systems. From solar cable cutter to solar connector crimping tools,we keep our commitment to quality work. With help of tool quality and innovative design, our professional hand tools offer possibilities of workflow optimization also in the field of cable prefabrication. Gas-tight, corrosion proof and weather-resistant crimps help ensure minimal losses and good energy transmission even after years of use.
Plumbing
The plumbing system is composed of two separate subsystems. One subsystem brings fresh water in, and another takes the wastewater out. In the plumbing system, the pipe used to transport potable drinking water usually use different materials from the pipe carrying drain water. The different regions also have differences in pipe material and size. Your plumbing system may contain one or several types of pipe.
Due to the complicated pipe and fitting standards, plumbing used to be limited to professionals. But the availability of a wide range of plumbing tools has allowed everyone to redo the pipe without any permit or training.
There are four methods through which you can get the work done:
1.Crimping
2.Pressing
3.Clamp
4.Expansion
5.Push to Connect
Focused heavily on providing people professional and affordable plumbing tools, IWISS spent a lot on R&D. For past decades, our company has worked across a variety of plumbing tools, which cover all five methods and meet the standards from the imperial system to the metric system. Our product line also includes pipe cutters, decrimping tools, and chamfer, offering more possibilities in pipe prefabrication. Not only in providing the single tool, but we also have professional a comprehensive, and high-performance, up-gradable tool kit for installing and maintaining today’s and tomorrow’s plumbing system.
Electrical Crimping
As a technique, crimping can produce long-lasting joints, efficiently and easily with very little training. Nowadays, Crimping has taken the place of soldering in many electrical applications and now is the most extensively used way for connections. When crimped properly, the strands remain individual even upon entering the insulation crimp, making the chances of strands breaking low,which ensure mechanically stability and corrosion-resistance. The proper crimping requires the contact, corresponding wire, and the most essential part--a suitable crimping tool.
IWISS with its sub-brand iCrimp offers crimping tools for virtually all types of electrical connections in the market, non-insulated, insulated, battery lug,open barrel, closed barrel, etc.
1.Made of high-quality steel, durable enough for long term service.
2.Accurate jaw design guarantees perfect crimping every time
3.Upgraded structure brings an effortless and stable operation
In the past decades, our team committed to R&D and released various new style crimping tools to make the crimping more efficiently and easily. To meet requirements in different countries, we also made the tools in both metric and imperial standards.
IWISS tools are designed to create more efficient power to make perfect crimping. We keep working to fulfill our commitment to providing every customer with high-quality tools for electrical applications.
Recommended
PEX Pipe Tools
PEX pipe tools are tools that are used to install and repair PEX pipes in plumbing and heating systems. PEX pipes are flexible plastic pipes that are resistant to corrosion, scaling, and freezing. They are widely used in residential and commercial applications because they are easy to work with, durable, and cost-effective.
There are different types of PEX pipe tools that are required for different stages of PEX pipe installation and maintenance. Some of the most common PEX pipe tools are:
1.PEX cutter tool: This tool allows you to cut PEX pipes to the desired length. It is important to use a sharp and clean cutter tool to avoid damaging the pipe or creating burrs that can affect the flow of water. A PEX cutter tool can be either manual or automatic.
2.PEX crimping tool: This tool is used to secure a copper crimp ring into place over the PEX pipe and the fitting. A crimp ring is a metal ring that creates a tight seal between the pipe and the fitting. A PEX crimping tool can be either manual or hydraulic. There are different sizes and shapes of crimping tools for different types of crimp rings and fittings.
3.PEX crimp ring remover tool: This tool is used to remove already installed copper crimp rings from the PEX pipe and the fitting. This tool is useful when you need to replace or repair a PEX pipe or a fitting. A PEX crimp ring remover tool can be either manual or hydraulic.
4.PEX expander tool: This tool is used to expand the PEX pipe before inserting a fitting. An expander tool is a device that has a cone-shaped head that rotates inside the pipe and stretches it. This creates a larger opening for the fitting and a tighter connection. A PEX expander tool can be either manual or electric.
Automotive Electrical Wiring Hand Crimping Pliers
Automotive electrical wiring crimping pliers are tools that are used to create secure and reliable connections between wires and terminals in vehicles. They are designed to crimp insulated and non-insulated terminals, open barrel terminals, connectors, and ferrules with different sizes and shapes. Crimping pliers can also cut, strip, and grip wires with ease and precision.
There are different types of crimping pliers available in the market, such as ratcheting, hydraulic, self-adjusting, and angled. Each type has its own advantages and disadvantages, depending on the application and preference of the user. Some crimping pliers come with interchangeable nose pliers, which allow the user to switch between different crimping profiles. Some crimping pliers also have ergonomic handles, which provide comfort and reduce fatigue.
Wire Cutting & Stripping
Among a series of coordinated operations involved in making an electrical connection, cable cutting, and stripping are the initial and important preparation steps.
Proper preparation ensures high-quality connections. Our tools are in your good hands.
The first step, cutting. The cable must be cut cleanly, straightly without great effort. IWISS with its sub-brand iCrimp offers a variety of cutters to cover a range from thin fine-wire conductor to large diameter power supply cables. The cutters achieve the basic requirements of a quality cutting tool, for example:
*Made of premium steel, cutting edges stay sharp with no fraying.
*Ergonomic handle design brings a comfortable operation
*Ratcheting mechanism makes large size cable cutting effortless
The second step, stripping, the proper removal of the sheath brings high quality conductive connections. The cable must be stripped to the proper length without damages. Stripping can be super easy and fast when you get a suitable stripper. Our tools are designed to make it easy to get quick and clean stripping for cables of different sizes and materials. There is two basic strippers for your choice:
1. Stripping pliers with multiple stripping holes. Sharp blades and precise design in diameter provide a clean strip without damage to the conductor.
2. Self-adjusting insulation strippers are ideal for cable in different materials. The stripping depth can be adjusted according to cable diameter, and sheath thickness. It reduces the risk of damage to the conductor.
Besides, we manufactured various versatile strippers to help people to get more work done at less cost.
Zip Tie Gun
Zip tie, also known as wire tie, cable tie, is a typical fastener for holding items together. With high strength, high-temperature resistance, and chemical resistance, zip tie offers an ideal fixing solution for use in harsh environments. It appears in production line facilities, aircraft, power plants, mines, commercial kitchens, tunnels, oil and gas platforms, and wiring systems.
In the market, there are two main types of cable tie are widely used, stainless steel zip ties and nylon cable ties.
First one, nylon cable ties are made of primary nylon material, which keeps the cost down and easy to work with. It has a flexible tape section with teeth that engage with a pawl in the head to form a ratchet.
Stainless steel tie is made of stainless steel. It is durable and high strength for long-term service, its sharp edge may cause injuries to hands.
Designed for batch operations with zip ties, IWISS covers a full selection of zip tie guns. Featured with
1. Built-in cutter provides neat installation and speeds up the workflow.
2.Solid construction supports long-term using.
3.Advanced design makes every tying reliable, with no injuries to hands.
4.Tight lock, will not stretch or slide.
Wire Rope
Swaging is a method of securing wire rope with fittings like aluminum sleeves and stainless steel tension swage studs. The connection will exceed the rated breaking strength of the wire rope or cable when properly applied. Therefore,swaging is widely used to accomplish tasks of light-duty projects and industrial applications. The proper swaging connections require quality sleeve,corresponding wire rope, and correct swaging tool. IWISS with its sub-brand iCrimp offers a series of swaging tools for virtually any type of swaging connections, from wire rope cutter, manual swager, bench mounted swager, to pneumatic swaging machine. The tools offer all key features of modern tools, such as:
1. Made of premium steel, the tools are high strength durable for long service life. With special surface treatment, the tools achieve a high degree of water proof, and corrosion-resistant
2. Accurate hole design and well-polished jaws makes every connection perfect with virtually all sleeve and wire rope in the market
3. Adjustable function makes tight and trust- worth connection even after a long time using.
4. Ergonomic handle ensures optimal force-transmission and anti-fatigue operation.
IWISS tools are designed to make connections much easier. We insist on innovation and released new style swaging tools in the past years. We don’t follow the trend, but we lead it.
Solar PV
Renewable energy will become progressively more important as time goes on. Convert light to electricity, solar power is an essential part of renewable energy supplies. In the past decades, due to the solar panel system is high performance and low-carbon,people carried extensive researches and have developed many applications on solar power, the cost of solar electricity is keeping falling. It reduces the use of fossil fuels and solves the issue of families in remote areas with stable and inexpensive electricity.The return of the photovoltaic system depends much on the number of solar connections. All solar connections must be installed properly and tightly for long-term resistance to extreme weather. To help people with the solar project, IWISS offers a wide selection of solar tools in single and in kits. Solar tool kit enables professional and efficient work with solar systems. From solar cable cutter to solar connector crimping tools,we keep our commitment to quality work. With help of tool quality and innovative design, our professional hand tools offer possibilities of workflow optimization also in the field of cable prefabrication. Gas-tight, corrosion proof and weather-resistant crimps help ensure minimal losses and good energy transmission even after years of use.
Plumbing
The plumbing system is composed of two separate subsystems. One subsystem brings fresh water in, and another takes the wastewater out. In the plumbing system, the pipe used to transport potable drinking water usually use different materials from the pipe carrying drain water. The different regions also have differences in pipe material and size. Your plumbing system may contain one or several types of pipe.
Due to the complicated pipe and fitting standards, plumbing used to be limited to professionals. But the availability of a wide range of plumbing tools has allowed everyone to redo the pipe without any permit or training.
There are four methods through which you can get the work done:
1.Crimping
2.Pressing
3.Clamp
4.Expansion
5.Push to Connect
Focused heavily on providing people professional and affordable plumbing tools, IWISS spent a lot on R&D. For past decades, our company has worked across a variety of plumbing tools, which cover all five methods and meet the standards from the imperial system to the metric system. Our product line also includes pipe cutters, decrimping tools, and chamfer, offering more possibilities in pipe prefabrication. Not only in providing the single tool, but we also have professional a comprehensive, and high-performance, up-gradable tool kit for installing and maintaining today’s and tomorrow’s plumbing system.
Electrical Crimping
As a technique, crimping can produce long-lasting joints, efficiently and easily with very little training. Nowadays, Crimping has taken the place of soldering in many electrical applications and now is the most extensively used way for connections. When crimped properly, the strands remain individual even upon entering the insulation crimp, making the chances of strands breaking low,which ensure mechanically stability and corrosion-resistance. The proper crimping requires the contact, corresponding wire, and the most essential part--a suitable crimping tool.
IWISS with its sub-brand iCrimp offers crimping tools for virtually all types of electrical connections in the market, non-insulated, insulated, battery lug,open barrel, closed barrel, etc.
1.Made of high-quality steel, durable enough for long term service.
2.Accurate jaw design guarantees perfect crimping every time
3.Upgraded structure brings an effortless and stable operation
In the past decades, our team committed to R&D and released various new style crimping tools to make the crimping more efficiently and easily. To meet requirements in different countries, we also made the tools in both metric and imperial standards.
IWISS tools are designed to create more efficient power to make perfect crimping. We keep working to fulfill our commitment to providing every customer with high-quality tools for electrical applications.
Deutsch Crimping
Deutsch connectors are environmentally sealed and waterproof electrical connectors that are commonly used in automotive, marine, and industrial applications. They are designed to withstand the harshest environments and conditions and are used in harsh environment applications where even a small degradation in connection may be critical. Deutsch DT environmentally sealed connectors are designed for cable-to-cable, cable-to-board, and cable-to-device applications.
Insertion & removal tools are hand tools designed for contact installation and removal on Deutsch connectors, specifically DT, DTM, and DTP connectors. These tools make it easy to insert and remove/extract contact pins from the connector without damaging either. One side of the insertion and removal tool is often meant to insert pins, while the other is for extraction.
iCrimp's crimping tools and removal tools are pretty versatile and have proven reliable and of rugged build quality.
IWISS Catalog 2022
IWIss Catalog 2022 includes our newest terminal crimping tools, wire cutters&strippers, wire rope swaging tools, and plumbing tools.
IWISS Catalog 2021
IWISS Catalog 2021 includes our newest terminal crimping tools, wire cutters&strippers, wire rope swaging tools, and plumbing tools.
Iwiss Tools New Catalogue
Iwiss Tools Catalogue,includs crimping tools,pipe tools,rebar tools,hydraulic tools and so on.
Iwiss Pipe Tools 2018
Iwiss Pipe Tools is most pupular used for North America, Europe and Australia. We can reach 300,000 pieces annual production. Our PEX Tools matched USA ASTM standard suitable for Watts Water, Nibco, Sharkbite, Apollp, Uponor, Sioux Chief, Lycar, CB and many others pipe fitting.
Iwiss tools introduce for Plumbing
Iwiss Pex Tools including PEX Crimping Tools,Pex Expander,Cinch Tools,Clamp Tools,PEX Pipe Cutter and PEX Removal Tools suitable for ASTM F1807/F1960/F2098/F877/F2080 standard pex pipe fittings and copper crimp fittings, Matched Watts Water,Nibco,Zurn,Apollo,Waterline,Uponor,Viega Pipe Fittings.
Iwiss Pipe Tools 2015 - Crimping Tools - Pipe Expander - HAVC Tools
Iwiss Pipe Tools including Pipe Pressing Tools and HAVC/Refrigeratoin Tools used for PEX pipes,PAP Plastic Pipes,Copper Tubes.
Iwiss Tools Catalogue - Solar Tools,Heavy Duty Connector Tools, Network Tools...
Iwiss Tools Catalogue - Solar Tools,Heavy Duty Connector Tools, Network Tools, Strapping Tools,Rebar Tools
Wiring Accessories - Wire Terminals,Cable Gland,Cable Connectors,Cable Ties
Iwiss Wiring Accessories including Wire Terminals,Cable Gland,Cable Connectors,Cable Ties,Cable Clips and so on.
Iwiss Pneumatic Crimper and Electrical Crimping Tools for various of terminal...
Iwiss Pneumatic Crimper and Electrical Crimping Tools used for various of terminals and wire connectors with CE and ISO9001 certifications.
Solar Tool Kits with Crimping Tools Cable Cutter and Wire Stripper
In this catalog you will find solar tool kits,solar crimping tools,solar cable cutter,solar cable stripper,solar spanner,solar power meter and many other solar tools.
Industrial lighting Catalogue Iwiss Electric Co.,Ltd
In this catalogue you will find coal mine explosion proof light, fixed industrial lighting, mobile explosion proof light, fixed emergency light, and mobile industrial light.
M22520 Standard Heavy Duty Connector Crimping Tools
The W2, qualified to MIL-DTL-22520/1, has virtually limitless application within the specified wire range of 12AWG (3.33mm2)
through 26AWG (0.128mm2). Over a thousand turret heads are available to adapt the tool frame to your specific military or
proprietary contact/wire combination. The 8 impression crimp, which is standard in the W2, assures absolute maximum tensile
strength with almost every closed barrel contact. Special indent configurations and gaging are available upon request.
Qualified to MIL-DTL-22520/2, the W1 is designed for most of the miniature and sub-miniature connector types that are so widely
used in electronic systems. The W1 meets the need for a miniature tool accommodating wire sizes 20AWG (0.52mm2) to 32 AWG
(0.0316mm2); the materials contact body is made of
copper alloy materials by partial annealing.
Full Automatic Terminal Crimping Machine Iwiss Tools
Iwiss Full Automatic Terminal Crimping Machine including digital control wire stripping machine, wire cutting machine and terminal crimping machine, this machine also including wire slitting device, wire collecting tools and wire reeling system.
Platform Electric Rebar Cutting Machine and Rebar Bending Machine
This is an ideal cutting machine for its reasonable model, widely used and advanced performance of building
engineering, steel mills, standard components factory and forging factory. Round steel, square steel, flat steel can be
easily cut, Angle steel and channel steel can also be cut with the forming blade. It is one of the essential to the processing
of steel equipment, it is mainly used in buildings, Bridges, tunnels, power stations, such as large water conservancy
project in fixed length cutting of reinforcement.
Portable Rebar Tying Machine 2014
The IWISS Rebar Tiers are extremely fast and easy to use. Just pull the trigger and you can tie rebar perfectly in less
than a second. By using them, you can also reduce the risk of health problems such as Carpal Tunnel Syndrome. Save
time, savemoney, increase job productivity with MAX Rebar Tying Tools.
Iwiss Power Fitting Catalogue 2014
including overhead power line fittings, distribution equipment fittings, aerial insulation conductor fitting, cable fittings and cable accessories.
Iwiss Fiber Optic Tools Catalogue 2013
In this catalogue you will find: Optical Fiber Test Equipments,Cable Preperation Tools,Fiber Optic Tool Kits,Fiber Optic Cleaning Solutions,Passive Optical Components,Polishing Equipments & Consumables.
Iwiss Hydraulic Tools Catalogue Main 2013-2014
Including Battery Power Tools,Hydraulic Crimping Tools,Mechanical Crimping Tools,Cable Cutter,Punch Driver,Riveting Tools,Knockout Punches,Punch Driver Kits,Hydraulic Pumps,Electric Pumps,Electric Busbar Cutting,Bending,Punching Machine,Hydraulic Cylinders.
Iwiss Wire Processing Machine Catalogue 2013
Iwiss Wire Processing Machine including wire processing machine,wire stripping machine,terminal crimping machine,wire cutting machine.
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
More Related Content
More from Iwiss Tools Co.,Ltd
Deutsch Crimping
Deutsch connectors are environmentally sealed and waterproof electrical connectors that are commonly used in automotive, marine, and industrial applications. They are designed to withstand the harshest environments and conditions and are used in harsh environment applications where even a small degradation in connection may be critical. Deutsch DT environmentally sealed connectors are designed for cable-to-cable, cable-to-board, and cable-to-device applications.
Insertion & removal tools are hand tools designed for contact installation and removal on Deutsch connectors, specifically DT, DTM, and DTP connectors. These tools make it easy to insert and remove/extract contact pins from the connector without damaging either. One side of the insertion and removal tool is often meant to insert pins, while the other is for extraction.
iCrimp's crimping tools and removal tools are pretty versatile and have proven reliable and of rugged build quality.
IWISS Catalog 2022
IWIss Catalog 2022 includes our newest terminal crimping tools, wire cutters&strippers, wire rope swaging tools, and plumbing tools.
IWISS Catalog 2021
IWISS Catalog 2021 includes our newest terminal crimping tools, wire cutters&strippers, wire rope swaging tools, and plumbing tools.
Iwiss Tools New Catalogue
Iwiss Tools Catalogue,includs crimping tools,pipe tools,rebar tools,hydraulic tools and so on.
Iwiss Pipe Tools 2018
Iwiss Pipe Tools is most pupular used for North America, Europe and Australia. We can reach 300,000 pieces annual production. Our PEX Tools matched USA ASTM standard suitable for Watts Water, Nibco, Sharkbite, Apollp, Uponor, Sioux Chief, Lycar, CB and many others pipe fitting.
Iwiss tools introduce for Plumbing
Iwiss Pex Tools including PEX Crimping Tools,Pex Expander,Cinch Tools,Clamp Tools,PEX Pipe Cutter and PEX Removal Tools suitable for ASTM F1807/F1960/F2098/F877/F2080 standard pex pipe fittings and copper crimp fittings, Matched Watts Water,Nibco,Zurn,Apollo,Waterline,Uponor,Viega Pipe Fittings.
Iwiss Pipe Tools 2015 - Crimping Tools - Pipe Expander - HAVC Tools
Iwiss Pipe Tools including Pipe Pressing Tools and HAVC/Refrigeratoin Tools used for PEX pipes,PAP Plastic Pipes,Copper Tubes.
Iwiss Tools Catalogue - Solar Tools,Heavy Duty Connector Tools, Network Tools...
Iwiss Tools Catalogue - Solar Tools,Heavy Duty Connector Tools, Network Tools, Strapping Tools,Rebar Tools
Wiring Accessories - Wire Terminals,Cable Gland,Cable Connectors,Cable Ties
Iwiss Wiring Accessories including Wire Terminals,Cable Gland,Cable Connectors,Cable Ties,Cable Clips and so on.
Iwiss Pneumatic Crimper and Electrical Crimping Tools for various of terminal...
Iwiss Pneumatic Crimper and Electrical Crimping Tools used for various of terminals and wire connectors with CE and ISO9001 certifications.
Solar Tool Kits with Crimping Tools Cable Cutter and Wire Stripper
In this catalog you will find solar tool kits,solar crimping tools,solar cable cutter,solar cable stripper,solar spanner,solar power meter and many other solar tools.
Industrial lighting Catalogue Iwiss Electric Co.,Ltd
In this catalogue you will find coal mine explosion proof light, fixed industrial lighting, mobile explosion proof light, fixed emergency light, and mobile industrial light.
M22520 Standard Heavy Duty Connector Crimping Tools
The W2, qualified to MIL-DTL-22520/1, has virtually limitless application within the specified wire range of 12AWG (3.33mm2)
through 26AWG (0.128mm2). Over a thousand turret heads are available to adapt the tool frame to your specific military or
proprietary contact/wire combination. The 8 impression crimp, which is standard in the W2, assures absolute maximum tensile
strength with almost every closed barrel contact. Special indent configurations and gaging are available upon request.
Qualified to MIL-DTL-22520/2, the W1 is designed for most of the miniature and sub-miniature connector types that are so widely
used in electronic systems. The W1 meets the need for a miniature tool accommodating wire sizes 20AWG (0.52mm2) to 32 AWG
(0.0316mm2); the materials contact body is made of
copper alloy materials by partial annealing.
Full Automatic Terminal Crimping Machine Iwiss Tools
Iwiss Full Automatic Terminal Crimping Machine including digital control wire stripping machine, wire cutting machine and terminal crimping machine, this machine also including wire slitting device, wire collecting tools and wire reeling system.
Platform Electric Rebar Cutting Machine and Rebar Bending Machine
This is an ideal cutting machine for its reasonable model, widely used and advanced performance of building
engineering, steel mills, standard components factory and forging factory. Round steel, square steel, flat steel can be
easily cut, Angle steel and channel steel can also be cut with the forming blade. It is one of the essential to the processing
of steel equipment, it is mainly used in buildings, Bridges, tunnels, power stations, such as large water conservancy
project in fixed length cutting of reinforcement.
Portable Rebar Tying Machine 2014
The IWISS Rebar Tiers are extremely fast and easy to use. Just pull the trigger and you can tie rebar perfectly in less
than a second. By using them, you can also reduce the risk of health problems such as Carpal Tunnel Syndrome. Save
time, savemoney, increase job productivity with MAX Rebar Tying Tools.
Iwiss Power Fitting Catalogue 2014
including overhead power line fittings, distribution equipment fittings, aerial insulation conductor fitting, cable fittings and cable accessories.
Iwiss Fiber Optic Tools Catalogue 2013
In this catalogue you will find: Optical Fiber Test Equipments,Cable Preperation Tools,Fiber Optic Tool Kits,Fiber Optic Cleaning Solutions,Passive Optical Components,Polishing Equipments & Consumables.
Iwiss Hydraulic Tools Catalogue Main 2013-2014
Including Battery Power Tools,Hydraulic Crimping Tools,Mechanical Crimping Tools,Cable Cutter,Punch Driver,Riveting Tools,Knockout Punches,Punch Driver Kits,Hydraulic Pumps,Electric Pumps,Electric Busbar Cutting,Bending,Punching Machine,Hydraulic Cylinders.
Iwiss Wire Processing Machine Catalogue 2013
Iwiss Wire Processing Machine including wire processing machine,wire stripping machine,terminal crimping machine,wire cutting machine.
More from Iwiss Tools Co.,Ltd (20)
Iwiss Pipe Tools 2015 - Crimping Tools - Pipe Expander - HAVC Tools
Iwiss Pipe Tools 2015 - Crimping Tools - Pipe Expander - HAVC Tools
Iwiss Tools Catalogue - Solar Tools,Heavy Duty Connector Tools, Network Tools...
Iwiss Tools Catalogue - Solar Tools,Heavy Duty Connector Tools, Network Tools...
Wiring Accessories - Wire Terminals,Cable Gland,Cable Connectors,Cable Ties
Wiring Accessories - Wire Terminals,Cable Gland,Cable Connectors,Cable Ties
Iwiss Pneumatic Crimper and Electrical Crimping Tools for various of terminal...
Iwiss Pneumatic Crimper and Electrical Crimping Tools for various of terminal...
Solar Tool Kits with Crimping Tools Cable Cutter and Wire Stripper
Solar Tool Kits with Crimping Tools Cable Cutter and Wire Stripper
Industrial lighting Catalogue Iwiss Electric Co.,Ltd
Industrial lighting Catalogue Iwiss Electric Co.,Ltd
M22520 Standard Heavy Duty Connector Crimping Tools
M22520 Standard Heavy Duty Connector Crimping Tools
Full Automatic Terminal Crimping Machine Iwiss Tools
Full Automatic Terminal Crimping Machine Iwiss Tools
Platform Electric Rebar Cutting Machine and Rebar Bending Machine
Platform Electric Rebar Cutting Machine and Rebar Bending Machine
Recently uploaded
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...
In today's fast-changing business world, Companies that adapt and embrace new ideas often need help to keep up with the competition. However, fostering a culture of innovation takes much work. It takes vision, leadership and willingness to take risks in the right proportion. Sachin Dev Duggal, co-founder of Builder.ai, has perfected the art of this balance, creating a company culture where creativity and growth are nurtured at each stage.
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf
91mobiles recently conducted a Smart TV Buyer Insights Survey in which we asked over 3,000 respondents about the TV they own, aspects they look at on a new TV, and their TV buying preferences.
De-mystifying Zero to One: Design Informed Techniques for Greenfield Innovati...
De-mystifying Zero to One: Design Informed Techniques for Greenfield Innovation With Your Product by VP of Product Design, Warner Music Group
Designing Great Products: The Power of Design and Leadership by Chief Designe...
Designing Great Products: The Power of Design and Leadership by Chief Designer, Beats by Dr Dre
Epistemic Interaction - tuning interfaces to provide information for AI support
Paper presented at SYNERGY workshop at AVI 2024, Genoa, Italy. 3rd June 2024
https://alandix.com/academic/papers/synergy2024-epistemic/
As machine learning integrates deeper into human-computer interactions, the concept of epistemic interaction emerges, aiming to refine these interactions to enhance system adaptability. This approach encourages minor, intentional adjustments in user behaviour to enrich the data available for system learning. This paper introduces epistemic interaction within the context of human-system communication, illustrating how deliberate interaction design can improve system understanding and adaptation. Through concrete examples, we demonstrate the potential of epistemic interaction to significantly advance human-computer interaction by leveraging intuitive human communication strategies to inform system design and functionality, offering a novel pathway for enriching user-system engagements.
From Daily Decisions to Bottom Line: Connecting Product Work to Revenue by VP...
From Daily Decisions to Bottom Line: Connecting Product Work to Revenue by VP of Product, Amplitude
Leading Change strategies and insights for effective change management pdf 1.pdf
Leading Change strategies and insights for effective change management pdf 1.pdf
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024
As AI technology is pushing into IT I was wondering myself, as an “infrastructure container kubernetes guy”, how get this fancy AI technology get managed from an infrastructure operational view? Is it possible to apply our lovely cloud native principals as well? What benefit’s both technologies could bring to each other?
Let me take this questions and provide you a short journey through existing deployment models and use cases for AI software. On practical examples, we discuss what cloud/on-premise strategy we may need for applying it to our own infrastructure to get it to work from an enterprise perspective. I want to give an overview about infrastructure requirements and technologies, what could be beneficial or limiting your AI use cases in an enterprise environment. An interactive Demo will give you some insides, what approaches I got already working for real.
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...
💥 Speed, accuracy, and scaling – discover the superpowers of GenAI in action with UiPath Document Understanding and Communications Mining™:
See how to accelerate model training and optimize model performance with active learning
Learn about the latest enhancements to out-of-the-box document processing – with little to no training required
Get an exclusive demo of the new family of UiPath LLMs – GenAI models specialized for processing different types of documents and messages
This is a hands-on session specifically designed for automation developers and AI enthusiasts seeking to enhance their knowledge in leveraging the latest intelligent document processing capabilities offered by UiPath.
Speakers:
👨🏫 Andras Palfi, Senior Product Manager, UiPath
👩🏫 Lenka Dulovicova, Product Program Manager, UiPath
Accelerate your Kubernetes clusters with Varnish Caching
A presentation about the usage and availability of Varnish on Kubernetes. This talk explores the capabilities of Varnish caching and shows how to use the Varnish Helm chart to deploy it to Kubernetes.
This presentation was delivered at K8SUG Singapore. See https://feryn.eu/presentations/accelerate-your-kubernetes-clusters-with-varnish-caching-k8sug-singapore-28-2024 for more details.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
How world-class product teams are winning in the AI era by CEO and Founder, P...
How world-class product teams are winning in the AI era by CEO and Founder, Product School
Empowering NextGen Mobility via Large Action Model Infrastructure (LAMI): pav...
Empowering NextGen Mobility via Large Action Model Infrastructure (LAMI)
Search and Society: Reimagining Information Access for Radical Futures
The field of Information retrieval (IR) is currently undergoing a transformative shift, at least partly due to the emerging applications of generative AI to information access. In this talk, we will deliberate on the sociotechnical implications of generative AI for information access. We will argue that there is both a critical necessity and an exciting opportunity for the IR community to re-center our research agendas on societal needs while dismantling the artificial separation between the work on fairness, accountability, transparency, and ethics in IR and the rest of IR research. Instead of adopting a reactionary strategy of trying to mitigate potential social harms from emerging technologies, the community should aim to proactively set the research agenda for the kinds of systems we should build inspired by diverse explicitly stated sociotechnical imaginaries. The sociotechnical imaginaries that underpin the design and development of information access technologies needs to be explicitly articulated, and we need to develop theories of change in context of these diverse perspectives. Our guiding future imaginaries must be informed by other academic fields, such as democratic theory and critical theory, and should be co-developed with social science scholars, legal scholars, civil rights and social justice activists, and artists, among others.
The Art of the Pitch: WordPress Relationships and Sales
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
FIDO Alliance Osaka Seminar: The WebAuthn API and Discoverable Credentials.pdf
FIDO Alliance Osaka Seminar
Knowledge engineering: from people to machines and back
Keynote at the 21st European Semantic Web Conference
Recently uploaded (20)
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...
Builder.ai Founder Sachin Dev Duggal's Strategic Approach to Create an Innova...
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf
Smart TV Buyer Insights Survey 2024 by 91mobiles.pdf
De-mystifying Zero to One: Design Informed Techniques for Greenfield Innovati...
De-mystifying Zero to One: Design Informed Techniques for Greenfield Innovati...
Designing Great Products: The Power of Design and Leadership by Chief Designe...
Designing Great Products: The Power of Design and Leadership by Chief Designe...
Epistemic Interaction - tuning interfaces to provide information for AI support
Epistemic Interaction - tuning interfaces to provide information for AI support
From Daily Decisions to Bottom Line: Connecting Product Work to Revenue by VP...
From Daily Decisions to Bottom Line: Connecting Product Work to Revenue by VP...
Leading Change strategies and insights for effective change management pdf 1.pdf
Leading Change strategies and insights for effective change management pdf 1.pdf
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024
Kubernetes & AI - Beauty and the Beast !?! @KCD Istanbul 2024
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...
Dev Dives: Train smarter, not harder – active learning and UiPath LLMs for do...
Accelerate your Kubernetes clusters with Varnish Caching
Accelerate your Kubernetes clusters with Varnish Caching
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...
FIDO Alliance Osaka Seminar: Passkeys and the Road Ahead.pdf
FIDO Alliance Osaka Seminar: Passkeys and the Road Ahead.pdf
How world-class product teams are winning in the AI era by CEO and Founder, P...
How world-class product teams are winning in the AI era by CEO and Founder, P...
Empowering NextGen Mobility via Large Action Model Infrastructure (LAMI): pav...
Empowering NextGen Mobility via Large Action Model Infrastructure (LAMI): pav...
Search and Society: Reimagining Information Access for Radical Futures
Search and Society: Reimagining Information Access for Radical Futures
The Art of the Pitch: WordPress Relationships and Sales
The Art of the Pitch: WordPress Relationships and Sales
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...
FIDO Alliance Osaka Seminar: The WebAuthn API and Discoverable Credentials.pdf
FIDO Alliance Osaka Seminar: The WebAuthn API and Discoverable Credentials.pdf
Knowledge engineering: from people to machines and back
Knowledge engineering: from people to machines and back