This document provides setup instructions for assembling a multi-panel display unit. It consists of the following:
1) Vertical frame sections that connect using snap fittings and are assembled in stages by adding horizontal frames and light fixtures.
2) Light fixtures that clip onto the frames and are connected in series using jumper wires and power cords.
3) Fabric graphic panels and rigid panels that velcro to the frames.
4) An integrated greeting counter and two side pedestals that also have integrated lighting and graphic panels.
Meditation can help software developers by improving focus, reducing stress and social isolation, and cultivating mindfulness. It trains the mind to focus on the present moment and let thoughts come and go without getting caught up in them. For developers, this allows them to enter a state of deep focus needed for programming and to disengage from work thoughts after hours. Meditation also fosters understanding over judgment, which can help maintain complex code by viewing it without preconceived concepts. While the technique is simple, regularly practicing meditation can have mental and emotional benefits that enhance both work and life.
This document contains instructions and diagrams for a circular hanging banner that is part of a custom display booth. It includes diagrams of the banner showing its dimensions and graphic panel. It also provides care instructions for the fabric graphic panel, including stain removal tips and general cleaning, packing and storage guidelines.
This document summarizes an experiment observing the electrochemical reduction of three substituted aryl thiocyanate compounds using cyclic voltammetry. Compound 1, p-methoxyphenyl thiocyanate, showed an irreversible voltammogram with crossing, suggesting an autocatalytic intermediate is formed. Compounds 2 and 3 did not form this intermediate. Compound 2 initially reduced at the nitro group before the thiocyanate. Compound 3 showed increased peak current on a gold versus glassy carbon electrode, indicating adsorption to the gold surface. The substituents affected the reduction mechanisms and potentials of the compounds.
Las plantas pueden fabricar su propio alimento a través de la fotosíntesis utilizando agua, sales minerales del suelo, gases del aire y luz solar. El proceso de nutrición de las plantas consta de tres etapas: tomar sustancias del suelo y el aire, transformar estas sustancias en alimento a través de la fotosíntesis, y distribuir el alimento por toda la planta.
No trabajamos solo por dinero, existen otros factores que tienen especial incidencia en nuestra motivación frente al trabajo; aquí analizamos algunos de los más importantes. #RRHH #RecursosHumanos #Empleo #Trabajo Visítanos en http://goo.gl/gb6PhS
The document provides setup instructions for a custom outdoor kiosk display for the SF 49ers Stadium Management Co. It consists of 3 sentences:
The kiosk has a canopy frame that is assembled from tubular rails and posts, with a waterproof canopy cover and graphic header attached. A 3-piece counter assembly slides into the frame and secures with fasteners. The components are packed into 4 separate crates for shipment.
This document provides installation instructions for a joint kit to connect two core unscreened data link cables. The instructions summarize:
1. Prepare the cable ends to the specified dimensions and slide the outer shrink sleeve onto one end.
2. Crimp the red pre-insulated connectors to the cable ends and abrade the outer sheath.
3. Wrap black hot melt tape around the conductors and apply self-adhesive aluminum foil to the cable sheaths.
This document summarizes a guidebook about home wiring. It is the 5th edition of the guidebook and includes a DVD, workbench reference card, over 800 photos and illustrations, and step-by-step instructions for wiring projects. The guidebook covers topics like installing track lighting, upgrading a service panel, doing common wiring repairs, and the essential skills of wiring. It is intended to be the most complete and up-to-date resource on home wiring.
Meditation can help software developers by improving focus, reducing stress and social isolation, and cultivating mindfulness. It trains the mind to focus on the present moment and let thoughts come and go without getting caught up in them. For developers, this allows them to enter a state of deep focus needed for programming and to disengage from work thoughts after hours. Meditation also fosters understanding over judgment, which can help maintain complex code by viewing it without preconceived concepts. While the technique is simple, regularly practicing meditation can have mental and emotional benefits that enhance both work and life.
This document contains instructions and diagrams for a circular hanging banner that is part of a custom display booth. It includes diagrams of the banner showing its dimensions and graphic panel. It also provides care instructions for the fabric graphic panel, including stain removal tips and general cleaning, packing and storage guidelines.
This document summarizes an experiment observing the electrochemical reduction of three substituted aryl thiocyanate compounds using cyclic voltammetry. Compound 1, p-methoxyphenyl thiocyanate, showed an irreversible voltammogram with crossing, suggesting an autocatalytic intermediate is formed. Compounds 2 and 3 did not form this intermediate. Compound 2 initially reduced at the nitro group before the thiocyanate. Compound 3 showed increased peak current on a gold versus glassy carbon electrode, indicating adsorption to the gold surface. The substituents affected the reduction mechanisms and potentials of the compounds.
Las plantas pueden fabricar su propio alimento a través de la fotosíntesis utilizando agua, sales minerales del suelo, gases del aire y luz solar. El proceso de nutrición de las plantas consta de tres etapas: tomar sustancias del suelo y el aire, transformar estas sustancias en alimento a través de la fotosíntesis, y distribuir el alimento por toda la planta.
No trabajamos solo por dinero, existen otros factores que tienen especial incidencia en nuestra motivación frente al trabajo; aquí analizamos algunos de los más importantes. #RRHH #RecursosHumanos #Empleo #Trabajo Visítanos en http://goo.gl/gb6PhS
The document provides setup instructions for a custom outdoor kiosk display for the SF 49ers Stadium Management Co. It consists of 3 sentences:
The kiosk has a canopy frame that is assembled from tubular rails and posts, with a waterproof canopy cover and graphic header attached. A 3-piece counter assembly slides into the frame and secures with fasteners. The components are packed into 4 separate crates for shipment.
This document provides installation instructions for a joint kit to connect two core unscreened data link cables. The instructions summarize:
1. Prepare the cable ends to the specified dimensions and slide the outer shrink sleeve onto one end.
2. Crimp the red pre-insulated connectors to the cable ends and abrade the outer sheath.
3. Wrap black hot melt tape around the conductors and apply self-adhesive aluminum foil to the cable sheaths.
This document summarizes a guidebook about home wiring. It is the 5th edition of the guidebook and includes a DVD, workbench reference card, over 800 photos and illustrations, and step-by-step instructions for wiring projects. The guidebook covers topics like installing track lighting, upgrading a service panel, doing common wiring repairs, and the essential skills of wiring. It is intended to be the most complete and up-to-date resource on home wiring.
This project was for a cartoon advertisement for Horton Automatics. The ad was to be created using both hand-drawn and computer generated elements. Mike Castillo was the designer who used Adobe Illustrator software to create the cartoon ad for Horton Automatics.
The project was to create cartoon media for HortonAutomatics using Adobe Photoshop and Illustrator. Mike Castillo was the designer working on the project. The cartoon content involved a character expressing frustration about having something tied around their private parts and announcing a farewell tour.
This document provides project details for coupling instruction. It was generated by computer for HortonAutomatics using Claris CAD Software and was designed by Mike Castillo.
1. The document provides step-by-step instructions for assembling a custom laminate backwall-counter kiosk, including attaching various cabinets, desks, accessories, and a backlit header.
2. Fluorescent light fixtures are attached to a light fixture sheet using clips and wired in series using jumper wires before being attached to the backwall.
3. A large framed backlit graphic and accessories like floating shelves and a monitor are also installed following the specified steps.
This project was for a cartoon advertisement for Horton Automatics. The ad was to be created using both hand-drawn and computer generated elements. Mike Castillo was the designer who used Adobe Illustrator software to create the cartoon ad for Horton Automatics.
The project was to create cartoon media for HortonAutomatics using Adobe Photoshop and Illustrator. Mike Castillo was the designer working on the project. The cartoon content involved a character expressing frustration about having something tied around their private parts and announcing a farewell tour.
This document provides project details for coupling instruction. It was generated by computer for HortonAutomatics using Claris CAD Software and was designed by Mike Castillo.
1. The document provides step-by-step instructions for assembling a custom laminate backwall-counter kiosk, including attaching various cabinets, desks, accessories, and a backlit header.
2. Fluorescent light fixtures are attached to a light fixture sheet using clips and wired in series using jumper wires before being attached to the backwall.
3. A large framed backlit graphic and accessories like floating shelves and a monitor are also installed following the specified steps.
1. P.O. Box 110527 Durham, NC 27709 • 4102 South Miami Blvd, Durham, NC 27703
tel 919.544.6504 • fax 919.544.6729 • sales@godfreygroup.com • www.godfreygroup.com
ItalianTradeComm_56221_INS-7Shts_4-14
Setup InstructionsSetup Instructions
Italian Trade Commission_56221
FBW-1_BrightWall Display with
Greeting Counter and 2 Pedestals
2. 1. The BrightWall Module consists of 3 Vertical 4-Section Units
that remain intact. There are 2 End Frame Sections and 1
Mid Frame Section. Frame Sections 2 and 4 have
removeable Horizontal Flanged Frames and a Light Fixture
FrameAssembly that attach to the End and Mid Frame
Sections.
2. The Frame Members connect via Snap-Fit Bullet
Connectors. Simply line-up the Frame Holes/Bullet
Connectors and push-in to engage. Note that the Frame
pieces are labeled and must be positioned as shown.
3. Attach the Frame Members labeled L1 thru L4 to both the
End and Mid Frame Sections as shown. This occurs at
Frame Sections 2 and 4.
4. There are 4 Light Fixtures per FrameAssembly that clip
onto the Light Fixture Vertical Frame. Refer to attached
sheets for Light Fixture Cabling and Fixture Details.
FBW-1_BrightWall Display FrameAssembly
P.O. Box 110527 Durham, NC 27709 • 4102 South Miami Blvd, Durham, NC 27703
tel 919.544.6504 • fax 919.544.6729 • sales@godfreygroup.com • www.godfreygroup.com
FBW-1_BrightWall_FrameAssy_4-14
LA
LB
LC
L1
L2
L3
L3
L3
L4
L1
L2
L3
L3
L3
L4
4-26w Fluorescent
Light Fixtures
Clipped to Frame
Light Fixture
FrameAssembly
4 Vertical End
Frame Section-
Remains Intact
4 Vertical Mid
Frame Section-
Remains Intact
Horizontal Flanged
Frame Members-
Sections 2 and 4
Frame Sect-1
Frame Sect-2
Frame Sect-3
Frame Sect-4
Frame Sect-5
Exploded Front View
Key to Symbols
Represents Frame Member
Represents Fabric Panels
To Engage:
Line-Up Drill Hole With
Bullet Plunger, Depress
Bullet and Push Metal
Tube onto Connector.
To Disengage:
Depress Bullet
Plunger and Pull
Metal Tube From
Connector.
Typical Snap-Fit Bullet Connectors
Separating Velcro Detail
Please note that when
removing panels, use a
thin tool such as a putty
knife to separate the
Velcro. Separating the
panel Velcro by force can
damage the panels.
3. FBW-1_BrightWall_LtFixtureAssy_4-14
1. The BrightWall Module has (5) Light Fixture Frame
Assemblies, (3) are fixed and (2) attach to the fixed Frame
Sections. that attach to the End and Mid Frame Sections.
2. There are (20) 26 watt Fluorescent Light Fixtures. On each
Light Bar Frame, (2) sets of Light Fixtures join together then
attach to the Frame at the Metal Clips. Jumper Wires
connect the Light Fixtures in-series. There are (2) Cable
runs with (10) fixtures each.
3. The Power Cords on each run exit thru the grommets on
the End Fabric Panels.
FBW-1_BrightWall Display_Fluorescent Light Fixture Cabling
P.O. Box 110527 Durham, NC 27709 • 4102 South Miami Blvd, Durham, NC 27703
tel 919.544.6504 • fax 919.544.6729 • sales@godfreygroup.com • www.godfreygroup.com
Key to Symbols
Represents Frame Member
Represents Fabric Panels
To Engage:
Line-Up Drill Hole With
Bullet Plunger, Depress
Bullet and Push Metal
Tube onto Connector.
To Disengage:
Depress Bullet
Plunger and Pull
Metal Tube From
Connector.
Typical Snap-Fit Bullet Connectors
Separating Velcro Detail
Please note that when
removing panels, use a
thin tool such as a putty
knife to separate the
Velcro. Separating the
panel Velcro by force can
damage the panels.
LA
LB
LC
L2
L2
Frame Sect-1
Frame Sect-2
Frame Sect-3
Frame Sect-4
Frame Sect-526w
26w
26w
26w
26w
26w
26w
26w
26w
26w
26w
26w
26w
26w
26w
26w
26w
26w
26w
26w
Cable (10) Light
Fixtures In-Series-
Run Power Cord
thru Grommet in
Side Panel
(2) Light Fixtures
Join at the Center-
Attach to Vertical
Light Bar Frame
at Metal Clips
6"
Jumper
Wire
6"
Jumper
Wire
24"
Jumper
Wire
24"
Jumper
Wire
24"
Jumper
Wire
24"
Jumper
Wire
Power
Cord
Power
Cord
6"
Jumper
Wire
6"
Jumper
Wire
Cable (10) Light
Fixtures In-Series-
Run Power Cord
thru Grommet in
Side Panel
Exploded Front View
4. LA
LB
LC
2-Piece Sintra
Top Panels with
Air Vents- Velcro
to Top of Frame
Fabric-Covered
Masonite End
Panels Velcro to
End Frames
20 Front and Back
Backlit Graphic
Panels- Velcro to
Flanged Frames
End Panel Grommet
for Cabling Power
Cord
Frame Sect-1
Frame Sect-2
Frame Sect-3
Frame Sect-4
Frame Sect-5
Exploded Front View
FBW-1_BrightWall_PanelAssy_4-14
1. Velcro the two Sintra Panels to the top of the BrightWall
Display.
2. Velcro the Backlit Graphic Panels to the Flange Frames as
shown at right. There are 20 Graphic Panels on the Front
and Rear Side.
3. Velcro the Fabric End Panels to the BrightWall Frame.
FBW-1_BrightWall Display PanelAssembly
P.O. Box 110527 Durham, NC 27709 • 4102 South Miami Blvd, Durham, NC 27703
tel 919.544.6504 • fax 919.544.6729 • sales@godfreygroup.com • www.godfreygroup.com
Key to Symbols
Represents Frame Member
Represents Fabric Panels
To Engage:
Line-Up Drill Hole With
Bullet Plunger, Depress
Bullet and Push Metal
Tube onto Connector.
To Disengage:
Depress Bullet
Plunger and Pull
Metal Tube From
Connector.
Typical Snap-Fit Bullet Connectors
Separating Velcro Detail
Please note that when
removing panels, use a
thin tool such as a putty
knife to separate the
Velcro. Separating the
panel Velcro by force can
damage the panels.
5. Fluorescent Light Fixture Assembly Using Jumper WiresUsing Jumper Wires
Female
Housing
End
Male
Housing
End
Female
Housing
End
Male
Housing
End
Fluorescent
Lights
Jumper
Wire
Female Housing
End
Power Cord
Connecting
Lights
in a Series
Jumper Wire
Jumper Wire
Power Cord
1
2
3
4
P
a
r
t
s
L
i
s
t
Power Cord
Fluorescent
Lights
Jumper
Wire
Female/Male
Adapter
Female
Housing
End
Male
Housing
End
Velcro on
Back Side
Fluorescent Bulb AttachmentFluorescent Bulb Attachment
Exterior
Slot1 2 3
Twist the Light Housing
so that it lines up with the
Exterior Slot
Slide the Fluorescent Bulb
Prongs down into the Light
Housings on both ends
Twist the Fluorescent Bulb
either direction until the
Bulb Locks in place
Twist Until
Bulb Locks
in Place
Light
Housing
Joining Two FixturesJoining Two Fixtures
1 2 3
Joined Fixtures
on a Light Bar
Jumper
Power Cord
Female/Male
Adapter
Male
Housing
End
Female
Housing
End
Attach the Female End of the
Adapter to the Male Housing End
Then attach the Female
Housing End to the
Adapter
Lights attached
together with
Female/Male Adapter
Metal Clips -
Alternate
Attachment
Method
FluorescentLight_Update_10-13
P.O. Box 110527 Durham, NC 27709 • 4102 South Miami Blvd, Durham, NC 27703
tel 919.544.6504 • fax 919.544.6729 • sales@godfreygroup.com • www.godfreygroup.com
6. Counter-PedestalAssy_4-14
Custom Greeting CounterAssembly_One Unit
Custom Side PedestalAssembly_Two Units
P.O. Box 110527 Durham, NC 27709 • 4102 South Miami Blvd, Durham, NC 27703
tel 919.544.6504 • fax 919.544.6729 • sales@godfreygroup.com • www.godfreygroup.com
1_Greeting Counter Frame
The Counter Frame ships intact. Velcro (2)
Fluorescent 22w Light Fixtures at each end.
Cable the Power Cord thru the grommet
into the center section.
4_Completed Greeting CounterAssembly
2_Attaching Graphic Panel
Velcro the Graphic Panel to the face of the Front Fabric Panel.
5_Side Pedestal FrameAssembly
The Pedestal Frame ships intact.Attach the (3) Fluorescent
22w Light Fixtures to the Center Vertical Frame. Cable the
Power Cord thru the grommet in the Back Panel.
6_Completed Side PedestalAssembly- Front and Rear Views
Velcro the PedestalTops centered on top of the Frame as shown. Install the
IPDTF_ iPadTableTop Flanged Stands as detailed on the following sheet. Velcro
the Backlit Graphic Panels to the Flanged Frame.
3_Attach Graphic Panels to Flanged Frame Sections
Velcro the Backlit Graphic Panels to the Flanged Frames.
22w Fluorescent
Light Fixtures
Jumper Wire
Power Cord Front Graphic
Panel
Front Fabric
Panel
Locking Swing
Door
Backlit Graphic
Panels in
Flanged Frames
(3) 22w
Fluorescent
Light Fixtures
Attached to
Frame
Jumper Wire
Fabric-Wrapped
Masonite Rear
Panel
7. SidePedestalAssy_4-14
Custom Side PedestalAssembly Cont:
9_Completed Side Pedestal
Assembly- Front and Rear Views
P.O. Box 110527 Durham, NC 27709 • 4102 South Miami Blvd, Durham, NC 27703
tel 919.544.6504 • fax 919.544.6729 • sales@godfreygroup.com • www.godfreygroup.com
7_iPAD TableTop StandAssembly_IPDTF
(Fig.A) Secure iPad Stand to top of CounterTop using the Button-Hd Socket-Cap
Bolts, Washer and Wing Nut fasteners at (3) places.
(Fig. B) Remove the acrylic cover using the small tamper-proof key provided. Place
tablet inside and reassemble unit. If Ball Joint loosens on back, use the
large tamper-proof key to retighten it securely.
8_iPAD TableTop StandAssembly_Rear and Front View