The document is an instruction manual for ZeroTech riflescopes. It provides information on scope features, how to mount the scope, adjust parallax, zero the rifle, lock turrets, and care for the scope. Key details include instructions on setting diopter and parallax adjustment, zeroing at typical distances like 100m for centerfire and 50-75m for rimfire, and how to set the elevation turret zero stop to ensure consistent return to zero. The manual provides concise setup and usage guides for ZeroTech riflescope owners.
Turkey vs Georgia Tickets: Turkey's Road to Glory and Building Momentum for U...Eticketing.co
Euro Cup Germany fans worldwide can book Euro 2024 Tickets from our online platform www.eticketing.co.Fans can book Euro Cup 2024 Tickets on our website at discounted prices.
Turkey vs Georgia Turkey's Road to Redemption and Euro 2024 Prospects.pdfEticketing.co
Euro Cup Germany fans worldwide can book Euro 2024 Tickets from our online platform www.eticketing.co.Fans can book Euro Cup 2024 Tickets on our website at discounted prices.
The Split_ Hardik Pandya and Natasa Stankovic Part Ways News by Betkaro247 (3...bet k247
Betting ID
we like to introduce to our Cricket Betting ID platform, which help people to earn lot of money just by doing little-little predictions on games and events.
Indian cricketer Hardik Pandya and Serbian actress Natasha Stankovic have decided to part ways, ending a relationship that captivated fans and followers worldwide. The news of their split has been making headlines, stirring a mixture of shock, sadness, and speculation among their supporters.
Narrated Business Proposal for the Philadelphia Eaglescamrynascott12
Slide 1:
Welcome, and thank you for joining me today. We will explore a strategic proposal to enhance parking and traffic management at Lincoln Financial Field, aiming to improve the overall fan experience and operational efficiency. This comprehensive plan addresses existing challenges and leverages innovative solutions to create a smoother and more enjoyable experience for our fans.
Slide 2:
Picture this: It’s a crisp fall afternoon, driving towards Lincoln Financial Field. The atmosphere is electric—tailgaters grilling, fans in Eagles jerseys creating a sea of green and white. The air buzzes with camaraderie and anticipation. You park, join the throng, and make your way to your seat. The stadium roars as the Eagles take the field, sending chills down your spine. Each play is a thrilling dance of strategy and skill. This is what being an Eagles fan is all about—the joy, the pride, and the shared experience.
Slide 3:
But now, the day is marred by frustration. The excitement wanes as you struggle to find a parking spot. The congestion is overwhelming, and tempers flare. The delays mean you miss the pre-game excitement, the tailgate camaraderie, and even the opening kick-off. After the game, the joy of victory or the shared solace of defeat is overshadowed by the stress of navigating out of the parking lot. The gridlock, honking horns, and endless waiting drain the energy and joy from what should have been an unforgettable experience.
Our proposal aims to eliminate these frustrations, ensuring that from arrival to departure, your experience is extraordinary. Efficient parking and smooth traffic flow are key to maintaining the high spirits and excitement that make game days special.
Slide 4:
The Philadelphia Eagles are not just a premier NFL team; they are an integral part of the community, hosting games, concerts, and various events at Lincoln Financial Field. Our state-of-the-art stadium is designed to provide a world-class experience for every attendee. Whether it's the thrill of game day, the excitement of a live concert, or the camaraderie of community events, we pride ourselves on delivering a fan-first experience and maintaining operational excellence across all our activities. Our commitment to our fans and community is unwavering, and we continuously strive to enhance every aspect of their experience, ensuring they leave with unforgettable memories.
Slide 5:
Recent trends show an increasing demand for efficient event logistics. Our customer feedback has consistently highlighted frustrations with parking and traffic. Surveys indicate that a significant number of fans are dissatisfied with the current parking situation. Comparisons with other venues like Citizens Bank Park and Wells Fargo Center reveal that we lag in terms of parking efficiency and convenience. These insights underscore the urgent need for innovation to meet and exceed fan expectations.
Slide 6:
As we delve into the intricacies of our operations, one glaring issue emer
Spain vs Italy Spain at Euro Cup 2024 Group, Fixtures, Players to Watch and M...Eticketing.co
Euro Cup 2024 fans worldwide can book Spain vs Italy Tickets from our online platform www.eticketing.co. Fans can book Euro Cup Germany Tickets on our website at discounted prices.
Ukraine Euro Cup 2024 Squad Sergiy Rebrov's Selections and Prospects.docxEuro Cup 2024 Tickets
After securing their spot through the playoff route, Ukraine is gearing up for their fourth consecutive European Championship. Ukraine first qualified as hosts in 2012, but in 2016
Serbia vs England Tickets: Serbia Prepares for Historic UEFA Euro 2024 Debut ...Eticketing.co
Eticketing.co offers UEFA Euro 2024 Tickets to admirers who can get Serbia vs England Tickets through our trusted online ticketing marketplace. Eticketing.co is the most reliable source for booking Euro Cup Final Tickets. Sign up for the latest Euro Cup Germany Ticket alert.
Gabriel Kalembo A Rising Star in the World of Football Coachinggabrielkalembous
Gabriel Kalembo is a player's coach who connects with his teams on a deep level. With a strong background in sports science and a passion for the game, Kalembo has developed a unique coaching philosophy that emphasizes player development and tactical flexibility. His ability to connect with players and create a positive team culture has led to success at every level he has coached.
Serbia vs England Tickets: Serbia's Return to Euro Cup 2024, A Look at Key Pl...Eticketing.co
Eticketing.co offers UEFA Euro 2024 Tickets to admirers who can get Serbia vs England Tickets through our trusted online ticketing marketplace. Eticketing.co is the most reliable source for booking Euro Cup Final Tickets. Sign up for the latest Euro Cup Germany Ticket alert.
Croatia vs Italy Can Luka Modrić Lead Croatia to Euro Cup Germany Glory in Hi...Eticketing.co
Euro 2024 fans worldwide can book Croatia vs Italy Tickets from our online platform www.eticketing.co. Fans can book Euro Cup Germany Tickets on our website at discounted prices.
Boletin de la I Copa Panamericana de Voleibol Femenino U17 Guatemala 2024Judith Chuquipul
holaesungusto.- Boletín final de la I Copa Panamericana de Voleibol Femenino U17 - Ciudad de Guatemala 2024 que se realizó del 27 de mayo al 01 de julio, en el Domo Polideportivo Zona 13.
Fuente: norceca.net
Understanding Golf Simulator Equipment A Beginner's Guide.pdfMy Garage Golf
Dive into golf simulation with our beginner's guide, perfect for anyone new to the concept. Understand the critical components like sturdy frames, high-quality impact screens, and side netting that ensure your safety and enrich your practice sessions. Learn the benefits of proper projector mounts and compatibility with your existing setup. This guide helps you make informed choices, transforming your home into a realistic and effective golfing practice environment.
For More Information-: https://mygaragegolf.com/shop
3. 3
ZEROTECH - INSTRUCTION MANUAL
Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
INTRODUCTION
LIFETIME WARRANTY
SCOPE FEATURES
SETTING THE DIOPTRE
MOUNTING YOUR SCOPE
ADJUSTING PARALLAX
ZEROING YOUR RIFLE
LOCKING WINDAGE & ELEVATION TURRETS
ZEROING THE WINDAGE TURRET
THRIVE & THRIVE HD MODELS
ILLUMINATION FEATURE
LENS COVER &
TURRET MULTI-TOOL
SCOPE CARE
RETICLES
WARRANTY INFORMATION
4
5
6
8
10
12
14
17
21
23
25
27
31
32
34
CONTENTS
PAGES
4. 4 ZEROTECH - INSTRUCTION MANUAL Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
WELCOME TO THE ZEROTECH RIFLESCOPE FAMILY!
Customer First - We listened to you and came up with a family of riflescopes that will
satisfy the needs of our most discerning and experienced customers.
Backed by Experience - ZeroTech enjoys 55 years of experience in the Optics Market
supplying high quality brands to retailers throughout Australia and the Asia Pacific.
Built for the Australian Shooter - Designed and built to endure the harsh conditions of
the Australian bush and the exacting demands of the precision shooter.
Lifetime Warranty - Be safe in the knowledge that your scope is backed by our Triple A
Lifetime Warranty: ‘ANY OWNER, ANY PROBLEM, ALWAYS COVERED’
Bespoke Reticles - Practical reticles for the everyday shooter. Helping you put
rounds on target!
INTRODUCTION
5. 5
ZEROTECH - INSTRUCTION MANUAL
Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
BACKED FOR LIFE!
Be safe in the knowledge that your scope is
backed by our Triple A Lifetime Warranty:
-
Fully transferable, covers accidental damage as
well as defects in materials and workmanship.
-
No receipt or warranty card is required.
-
We will repair or replace product with equal or
similar value and/or specifications.
- We will return product to you at no charge. ‘ANY OWNER, ANY PROBLEM,
ALWAYS COVERED’
LIFETIME WARRANTY
6. 6 ZEROTECH - INSTRUCTION MANUAL Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
Locking Elevation
Turret Locking Windage
Turret
Magnification Power
Change Ring
Parallax Turret
(side focus)
Ocular
Dioptre Adjuster
Objective
Half Magnification Indicator (HMI) –
Second Focal Plane (SFP) models only
30mm Maintube
TRACE TRACE ADVANCED FEATURES
SCOPE FEATURES
7. 7
ZEROTECH - INSTRUCTION MANUAL
Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
Windage Turret Cap
Windage Turret
Elevation Turret
Elevation Turret Cap
Half Magnification Indicator
(HMI)
Magnification Power
Change Ring
Parallax Turret
(side focus)
Push Button
Reticle Illumination
(on illuminated models only)
Ocular
Dioptre Adjuster
Flip up HD
Alloy Lens Cover
Objective
THRIVE THRIVE HD FEATURES
8. 8 ZEROTECH - INSTRUCTION MANUAL Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
BEFORE YOU START USING YOUR SCOPE, IT IS EXTREMELY IMPORTANT
TO MAKE SURE YOU HAVE ADJUSTED THE DIOPTRE CORRECTLY. THE
CORRECT DIOPTRE SETTING WILL ENSURE THAT YOUR RETICLE REMAINS
CLEAR AND SHARP THROUGHOUT THE ENTIRE FOCAL RANGE OF YOUR
SCOPE. TO SET YOUR DIOPTRE, FOLLOW THE STEPS BELOW;
SETTING THE DIOPTRE
Set your magnification to the maximum power.
If fitted, set the parallax turret to the infinity marker.
Find a blank, featureless and bright surface, such as a white wall or clear blue sky
and look through your scope for no more than 5 seconds at a time.
NEVER LOOK THROUGH YOUR SCOPE DIRECTLY AT THE SUN.
1.
2.
3.
9. 9
ZEROTECH - INSTRUCTION MANUAL
Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
When briefly looking through the scope, the reticle should appear sharp and clear
immediately. If the reticle is not immediately sharp and clear, twist the dioptre
adjuster to bring the reticle into sharp focus. The dioptre adjuster has approximately
1¾ turns of adjustment. We recommend starting with the dioptre assembly twisted
flush up against the ocular and making adjustments in an anticlockwise (towards
the + symbol marked on the ocular) direction until the optimal setting is reached.
Once you have established your dioptre
setting, make note of the position of the
dioptre for future reference. You will not
need to make frequent adjustments to your
dioptre unless your setting is disturbed or
changed by someone else.
4.
5.
10. 10 ZEROTECH - INSTRUCTION MANUAL Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
BEFORE MOUNTING YOUR SCOPE TO A FIREARM, IT IS ESSENTIAL THAT
YOU CONFIRM THAT YOUR FIREARM IS UNLOADED AND NO AMMUNITION IS
PRESENT IN YOUR WORKSPACE.
TO AVOID PERMANENT AND UNECCESSARY DAMAGE TO YOUR NEW RIFLESCOPE,
IT SHOULD ALWAYS BE MOUNTED BY AN EXPERIENCED PROFESSIONAL.
MOUNTING YOUR SCOPE
Once you are satisfied the base(s) is correctly fitted to the receiver of your firearm,
proceed to fit the rings to the base(s) and ensure the ring clamps are tightened to
the recommend torque settings as specified by the manufacturer.
With the ring tops removed, place the scope in the ring bases and gently slide the
scope back and fourth in the ring bases to ensure the scope slides freely. If the
scope does not slide freely, lapping of the rings may be necessary to avoid damage
1.
2.
11. 11
ZEROTECH - INSTRUCTION MANUAL
Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
to the scope maintube. ZeroTech always recommends the use of high quality rings
and bases to ensure the best possible fitting of your scope.
Avoid mounting the scope with the rings contacting the junction of the maintube/erector
housing, magnification ring/maintube junction or the objective/maintube junction.
It is essential to confirm that no part of the scope is contacting the barrel or receiver
when the scope is mounted in the rings.
Once you have confirmed the fit of the scope in the ring bases, fit the ring tops and
tighten the ring top bolts to between 22 – 25 in lbs or 2.5 – 2.8NM.
ZeroTech highly recommends the use of a scope level (bubble level) fitted to the
rings or the scope maintube to ensure the reticle can consistently be aligned with
the fall of gravity every time a shot is fired. This is particularly important for precision
shooting applications.
*If your level mounts to the maintube of the scope, follow the same guidelines as observed
for scope ring fitting to ensure the level does not damage the maintube of your scope.
3.
4.
5.
6.
12. 12 ZEROTECH - INSTRUCTION MANUAL Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
ADJUSTING PARALLAX
If your ZeroTech scope is fitted with a parallax turret, it is important to adjust the parallax
turret for shots taken at different distances. Some shooters refer to the parallax turret as
the ‘side focus’. It is referred to as the ‘side focus’ because by turning the turret, it will
bring your target image into focus. As a general rule and as long as your dioptre is set
correctly (refer to page 8 – ‘Setting the Dioptre’) the sharper the target image is focused,
the parallax error will be less.
Parallax error is quite easy to detect when following the instructions below;
Acquire your target image at any distance and make sure your rifle is well supported
by the use of a bipod and rear bag (or similar).
Use the parallax turret to obtain the sharpest/ clearest possible target image and
establish a refined point of aim on the target.
Once you have established a refined point of aim and a sharp target image, move
1.
2.
3.
13. 13
ZEROTECH - INSTRUCTION MANUAL
Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
your head gently up and down whilst looking through the scope. Be sure not to
disturb the rifle/ sights.
If you are able to observe the reticle departing slightly from the intended point of aim,
make small adjustments on the parallax turret until the reticle remains fixed on your
point of aim.
You will need to repeat this process
when shooting at different distances or
in different environmental conditions.
The distance markings on the
parallax turret are intended as
a guide only. Dioptre settings and
environmental factors are likely to cause
the distance markings to vary in relation
to the actual distance of the target.
Adjust the parallax turret to
bring the target image into focus
4.
5.
6.
14. 14 ZEROTECH - INSTRUCTION MANUAL Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
ZEROING DISTANCES
Centrefire rifles: Zerotech recommends zeroing most centrefire rifles at approximately
100 metres +/- 10 metres. 100 metres enables the shooter to overcome any offset
problems caused by the centre height of the scope above bore but is not too far as to
accidentally build in an error due to unobserved environmental conditions such as wind.
Rimfire rifles: Most commonly, rimfire hunting rifles are zeroed at 50 – 75 metres
depending on the type of ammunition being used. Rimfire target rifles may have different
zeroing requirements depending on purpose.
We always recommend that you zero your rifle in the same manner as you
typically shoot your rifle. For example, if you mainly shoot your rifle from a bench,
zero your rifle by shooting from a bench. If you predominately shoot your rifle in
the prone position, zero your rifle from the same position.
ZEROING YOUR RIFLE
15. 15
ZEROTECH - INSTRUCTION MANUAL
Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
Before you fire your first shot, you should bore sight your rifle to ensure your scope and
your barrel are both aligned at the intended point of impact on your target. To do this with a
bolt action rifle, remove the bolt with the rifle securely supported (front and rear) and align
the bore with the target.
Without disturbing the rifle, carefully look through the scope and check that the reticle is
also aligned with the same point as the bore on the target. If the reticle is not aligned, use
the windage end elevation adjustments on your scope to adjust the reticle to the intended
point of impact on the target.
Once you are satisfied that the scope and the bore of your rifle are aligned to the same
point on the target, fire a shot at the target and observe the point of impact (bullet hole). If
required, use the windage and elevation turrets on your scope to adjust the bullet impact.
16. 16 ZEROTECH - INSTRUCTION MANUAL Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
Dialling the elevation turret in the direction of the ‘U’ symbol will adjust the bullet impact
upwards on the target. Likewise, dialling the windage turret in the direction of the ‘R’
symbol will adjust the bullet impact to the right on the target.
� If your scope turrets are indexed in ¼ Minutes of Angle (0.25 MOA), each ‘click’ of
your scope turret will adjust you bullet impact approximately 7-8mm at 100 metres
(approx. ¼” at 100 yards).
� If your scope turrets are indexed in 0.1 Milrad (0.1 MRAD), each ‘click’ of your scope
turret will adjust your bullet impact 1cm at 100 metres (0.36” at 100 yards).
ZEROING DISTANCES CONTINUED...
17. 17
ZEROTECH - INSTRUCTION MANUAL
Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
Once you have established a zero for your rifle, the zero stop feature can be set to
ensure a consistent return to zero after dialling the elevation turret to compensate for
shots taken at distances other than that of your confirmed zero.
*(TRACE AND TRACE ADV MODELS ONLY)
LOCKING WINDAGE AND ELEVATION TURRETS*
SETTING THE ZERO STOP
Remove the elevation turret by
loosening the three (3) opposing
grub screws located in the top of
the elevation turret with a 2mm
hex key. Remove the elevation
turret and set aside.
Grub screws located at these
points. Loosen each grub
screw 4 to 5 revolutions with
a 2mm hex key.
SETTING THE ELEVATION ZERO STOP
1.
18. 18 ZEROTECH - INSTRUCTION MANUAL Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
With the elevation turret removed, the orange zero stop ring will be visible. Similar to
the elevation turret cap, the orange zero stop ring also has three (3) opposing grub
screws. Use your 2mm hex key to loosen the grub screws 1 to 2 revolutions each.
This will allow the orange zero stop ring to spin freely.
Slide the orange zero stop ring downwards until it stops. During this process, it is
important to note the small black lug located on side of the orange zero stop ring.
There is also a lug located the top face of the lower assembly, directly underneath
the orange zero stop ring. It is critical that the lug on the side of the orange zero
stop ring is positioned on the right hand side of the lug on the lower assembly.
Failure to follow this step will result in the elevation adjustment being locked out and
unusable until the zero stop is reset. If this occurs, simply position the lug on the
orange zero stop ring on the other side of the lug on the lower assembly.
Tighten the three (3) 2mm grub screws in the orange zero stop ring. The zero
stop is now set.
2.
3.
4.
19. 19
ZEROTECH - INSTRUCTION MANUAL
Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
The zero stop is now set. Tighten the three
2mm grub screws and replace the elevation
turret indexed to the ‘0’ position.
Note the position of the lugs as
described in step 3.
SETTING THE ZERO STOP CONTINUED...
Loosen the three
2mm grub screws in
the orange zero stop
and slide the zero
stop downwards until
it stops.
1.
2.
3.
20. 20 ZEROTECH - INSTRUCTION MANUAL Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
Replace the elevation turret and make
sure to align the ‘0’ on the elevation
turret cap to the vertical marker on
the lower turret assembly to enable
an easy and precise reference when
dialling the elevation turret. Tighten the
three (3) 2mm grub screws to secure
the turret cap. We recommend using
the short end of your hex key to apply
adequate torque to the grub 2mm
grub screws.
Elevation turret is indexed to ‘0’ showing
that the scope is set to the zero range
of the rifle.
5.
21. 21
ZEROTECH - INSTRUCTION MANUAL
Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
ZEROING THE WINDAGE TURRET
The windage turret can be reset to ‘0’ without completely removing the windage
turret cap from the scope. It is important to note that the windage turret does not
have a zero stop feature as the turret needs to be able to adjust the bullet impact
both left and right equally at all times.
With the windage turret in the unlocked position, loosen the three (3) 2mm grub
screws approximately ½ - 1 revolution each. This will allow the windage turret to
spin freely.
With the windage turret spinning freely, align the ‘0’ on the turret with the index
line on the lower turret assembly and tighten the three (3) 2mm grub screws,
using the short end of your hex key for adequate leverage.
1.
2.
3.
22. 22 ZEROTECH - INSTRUCTION MANUAL Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
ZEROING THE WINDAGE TURRET CONTINUED...
Align the ‘0’ on the windage turret
cap with the index marker line on
the turret body.
23. 23
ZEROTECH - INSTRUCTION MANUAL
Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
THRIVE THRIVE HD
RESETTING THE TURRETS AFTER ZEROING
After you have followed the mounting and zeroing instructions on pages 14 – 16,
you are ready to reset the elevation and windage turrets to zero (‘0’).
Holding the turret in place, use the ZT multi-tool
to unscrew the turret keeper anticlockwise.
Remove the keeper and the turret. (For more
info on ZT multi-tool see page 27).
Replace the turret with the reference set to ‘0’
(zero). Replace and tighten the keeper using the
ZT multi-tool. It is not necessary to overtighten
the keeper.
1.
24. 24 ZEROTECH - INSTRUCTION MANUAL Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
Check your turret to make sure the ‘0’ on the turret is aligned with the index mark
on the turret body
Repeat this process for the windage turret.
Replace the turret caps to ensure your zero settings aren’t disturbed.
Make sure the ‘0’ marker aligns with
the index marker on the turret body.
2.
3.
4.
RESETTING THE TURRETS AFTER ZEROING CONTINUED...
25. 25
ZEROTECH - INSTRUCTION MANUAL
Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
Thrive HD models fitted with the push button illumination function have 6 settings
(5 illumination settings + OFF setting).
ILLUMINATION FEATURE
Before use, install the CR2032 battery by removing the illumination turret battery
cover. Unscrew in an anticlockwise direction.
Press the illumination control button once to illuminate the reticle. You can then
toggle between the brightness settings by quickly pressing the button.
IMPORTANT - To turn the reticle illumination off, press and hold the button for 2 – 3
seconds.
Models fitted with the push button illumination have an auto shutdown feature.
The reticle will automatically power-off after 3 hours to avoid excessive battery
consumption.
Our push button illumination has a memory function that resumes on the same
brightness setting the next time the illumination is activated.
1.
2.
3.
4.
5.
27. 27
ZEROTECH - INSTRUCTION MANUAL
Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
ZEROTECH LENS COVER AND TURRET MULTI-TOOL
Various size lens cover
adjustment tool
Various size lens cover
adjustment tool
Keyring hole
Thrive Series Turret Tool
28. 28 ZEROTECH - INSTRUCTION MANUAL Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
ADJUSTABLE FLIP UP LENS CAPS
(THRIVE HD AND TRACE MODELS)
29. 29
ZEROTECH - INSTRUCTION MANUAL
Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
Zerotech Thrive HD and Trace models are fitted with HD Alloy Flip Up lens covers. The
HD Alloy lens covers are removable and can be rotated to the preferred position of the
shooter. For example, some shooters prefer their objective flip up cover to fold out to the
side of the scope instead of folding to the top.
It is likely that you will also need to adjust the position of the ocular flip up cover after
you have obtained the correct dioptre setting (as described on page 8).
To adjust the position of the flip up lens covers, follow the steps below:
If you wish to completely remove the flip up lens covers, simply use the multi-tool
to rotate the lens cover lock ring in an anticlockwise direction until the lens cover
completely detaches from the scope.
Select the end of the multi-tool that fits the slots in the lock ring of your lens cover
Loosen the lens cover lock ring by twisting the multi-tool in an anticlockwise direction
Rotate the lens cover to the desired position
Tighten the lens cover lock ring but twisting the multi-tool in a clockwise direction
1.
2.
3.
4.
30. 30 ZEROTECH - INSTRUCTION MANUAL Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
USING THE ZEROTECH MULTI-TOOL TO RESET THE ELEVATION AND
WINDAGE TURRETS (THRIVE SERIES ONLY)
31. 31
ZEROTECH - INSTRUCTION MANUAL
Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
RESET THE ELEVATION AND WINDAGE TURRETS
Once you have zeroed your rifle at the desired distance, it is recommended that
you reset your elevation and windage turrets back to ‘0’. This gives the shooter the
ability to use the turrets to precisely dial elevation and windage onto the scope when
shooting at distances other than the zero distance for the rifle.
To reset the turrets on the Thrive and Thrive HD models, you will require the Zerotech
multi tool (or a coin). Follow the steps below.
Holding the turret firmly, insert the multi tool into the slot in the turret centre bolt and
completely remove the centre bolt but twisting the multi tool in an anticlockwise direction.
Once the centre bolt has been removed, simply lift the turret away from the scope.
Refit the turret to the scope, making sure to align the ‘0’ marking on the turret with
the index line on the scope body.
Hold the turret firmly and tighten the centre bolt back down by twisting the multi tool
in a clockwise direction
1.
2.
3.
4.
32. 32 ZEROTECH - INSTRUCTION MANUAL Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
ZEROTECH RETICLES
SECOND FOCAL PLANE RETICLES
Available in;
THRIVE HD 2.5-15x50
THRIVE HD 2.5-15x50 Illum.
THRIVE HD 6-24x50
THRIVE HD 6-24x50 Illum.
THRIVE HD 3-18x56 Illum.
VENGEANCE 4-20x50
VENGEANCE 4-20x50 Illum.
PHR-II
Available in;
THRIVE 3-9x40
THRIVE 3-12x44
PHR 3
PHR-3 MOA
Available in;
TRACE 3-18x50
TRACE 4.5-27x50
THRIVE HD 3-18x56
VENGEANCE 4-20x50
VENGEANCE 4-20x50 Illum.
R3
4
4
8
12
16
20
24
8 12
33. 33
ZEROTECH - INSTRUCTION MANUAL
Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
Available in;
THRIVE 3-12x44
THRIVE 4-16x50
Mildot
Available in;
THRIVE 3-9x40
THRIVE 3-12x44
THRIVE 4-16x50
ZEROPLEX
ZEROTECH RETICLES
SECOND FOCAL PLANE RETICLES
For specific information on your reticle, refer to the reticle spec sheet provided in your
scope box or visit www.zerotech.com.au
Available in;
VENGEANCE 1-6x24 Illum.
RAR
RAR
8
12
16
20
24
34. 34 ZEROTECH - INSTRUCTION MANUAL Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
Available in;
TRACE Advanced 4.5-27x50
RMG
8
8 10
10 6
6 4
4 2
2
4
6
8
10
2
1
3
5
7
9
RMG
Available in;
TRACE Advanced 3-18x50
THRIVE HD - 4-16x44
THRIVE HD - 6-24x50
LR HUNTER
For specific information on your reticle, refer to the reticle spec sheet provided in your
scope box or visit www.zerotech.com.au
32
32 40
40 24
24 16
16 8
8
16
24
32
40
8
4
12
20
28
36
RMG MOA
FIRST FOCAL PLANE RETICLES
RMG MOA
Available in;
TRACE Advanced 4.5-27x50
ZEROTECH RETICLES
35. 35
ZEROTECH - INSTRUCTION MANUAL
Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
SCOPE CARE
Wipe dust and debris from your scope body using a damp microfibre cleaning cloth.
If necessary, clean dust and dirt from the scope lenses using a lens brush and
the ZeroTech lens cleaning cloth.
Never spray cleaners or solvents on any part of your scope. Irreversible damage
may be caused by such products.
Avoid touching the scope lenses. Wipe fingerprints off the scope lenses using the
ZeroTech lens cleaning cloth.
1.
2.
3.
4.
36. 36 ZEROTECH - INSTRUCTION MANUAL Zerotech_Int_Thrive/Thrive HD/Trace_V4_May_2022
WARRANTY INFORMATION
Ph: +612 9938 3244
Email: sales@zerotech.com.au
Please direct all enquiries to service@zerotech.com.au
Company details;
ZEROTECH INTERNATIONAL PTY LTD
Address:
PO BOX 6176,
Frenchs Forest,
NSW, 2086
AUSTRALIA