huawei-sfp-ge-lx-sm1310-bidi-brochure-datasheet.pdf
•
0 likes•3 views
This document provides specifications for an SFP-GE-LX-SM1310-BIDI optical transceiver module. It operates at 1 Gbit/s over single-mode fiber for up to 10 km, using 1310 nm transmission and 1490 nm reception. It uses an eSFP form factor and LC connectors. This bidirectional module must be used in pairs with an SFP-GE-LX-SM1490-BIDI module for single-fiber connectivity. Contact information is provided to purchase or get more information on this product.
Report
Share
Report
Share
Download to read offline
![SFP-GE-LX-SM1310-BIDI (02315285)
Datasheet
Buy Huawei, Cisco, Zte, Hpe, Dell, Fortinet Network Equipment
Online In China At Low Price! www.hi-network.com
Overview
Optical Transceiver, eSFP, GE, BIDI Single-mode Module (TX1310/RX1490, 10km, LC)
Quick Specification
Table 1 shows the Quick Specs.
Model SFP-GE-LX-SM1310-BIDI
Part Number 02315285
Description Optical Transceiver, eSFP, GE, BIDI Single-mode Module (TX1310/RX1490, 10km, LC)
Level-1 category GE eSFP Optical Modules
Form factor eSFP
Application standard 1000BASE-BX10
Connector type LC
Optical fiber type SMF
Working case temperature [°
C(°
F)] 0°
C to 70°
C (32°
F to 158°
F)
Transmission rate [bit/s] 1 Gbit/s
Target transmission distance [km] Single-mode fiber: 10 km
Center wavelength [nm]
1490 nm (RX)
1310 nm (TX)
Maximum Tx optical power [dBm] -3.0
Minimum Tx optical power [dBm] -9.0
Minimum extinction ratio [dB] 6
Rx sensitivity [dBm] -19.5
Overload power [dBm] -3.0
Note
Supports the single-fiber bidirectional function.
Single-fiber bidirectional (BIDI) optical modules must be used in pairs. For example,
SFP-GE-LX-SM1310-BIDI must be used with SFP-GE-LX-SM1490-BIDI.](https://image.slidesharecdn.com/huawei-sfp-ge-lx-sm1310-bidi-brochure-datasheet-231205091107-509a305e/85/huawei-sfp-ge-lx-sm1310-bidi-brochure-datasheet-pdf-1-320.jpg)
![SFP-GE-LX-SM1310-BIDI (02315285)
Datasheet
Buy Huawei, Cisco, Zte, Hpe, Dell, Fortinet Network Equipment
Online In China At Low Price! www.hi-network.com
Figure 1 shows the appearance.
Get More Information
Do you have any question about the SFP-GE-LX-SM1310-BIDI (02315285)?
Contact us now via info@hi-network.com.
Specification
SFP-GE-LX-SM1310-BIDI Specification
Basic Information
Model SFP-GE-LX-SM1310-BIDI
Part Number 02315285
Description Optical Transceiver, eSFP, GE, BIDI Single-mode Module (TX1310/RX1490, 10km, LC)
Level-1 category GE eSFP Optical Modules
Technical Specifications
Connector type LC
Optical fiber type SMF
Form factor eSFP
Transmission rate [bit/s] 1G
Target transmission distance [km] Single-mode (G.652) optical fiber (diameter: 9 μm): 10 km
Application standard/Type 1000BASE-BX10
Working case temperature [°
C(°
F)] 0°
C to 70°
C (32°
F to 158°
F)
Type of the end face of the fiber ceramic ferrule PC or UPC
Center wavelength [nm] 1490(RX) 1310(TX)
Overload power (AVG) [dBm] -3.0
Maximum Tx optical power (AVG) [dBm] -3.0](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
huawei-sfp-ge-lx-sm1490-bidi-brochure-datasheet.pdf
This document provides specifications for the SFP-GE-LX-SM1490-BIDI optical transceiver module. It transmits at 1490 nm and receives at 1310 nm, with a maximum transmission distance of 10 km over single-mode fiber. Key features include an eSFP form factor, 1 Gbps transmission speed, and an operating temperature range of 0-70°C. It uses bidirectional single-fiber technology and must be paired with an SFP-GE-LX-SM1310-BIDI module for full-duplex communication over a single fiber.
huawei-sfp-ge-bxu1-sc-brochure-datasheet.pdf
This document provides specifications for an SFP-GE-BXU1-SC optical transceiver module. It operates at 1 Gbps over 10km of single-mode fiber using 1310nm and 1490nm center wavelengths for receive and transmit. The module supports bi-directional single fiber communication and has an SC connector interface in an SFP form factor. It is intended for use in GE networks and has an operating temperature range of 0°C to 70°C. Contact information is provided to purchase modules from HI-NETWORK.COM.
huawei-s-sfp-ge-lh80-sm1550-brochure-datasheet.pdf
The document provides specifications for an S-SFP-GE-LH80-SM1550 optical transceiver module. It is an eSFP form factor single-mode module that operates at 1550nm wavelengths over distances up to 80km on single-mode fiber. Key specs include a transmission rate of 1Gbps, LC connectors, 5.0dBm maximum transmit power, -23dBm receive sensitivity, and an operating temperature range of 0-70°C. More information is available by contacting the supplier.
huawei-sfp-ge-lx10-c-brochure-datasheet.pdf
The document provides specifications for an SFP-GE-LX10-C optical transceiver module. It operates at 1 Gbit/s over single-mode fiber for up to 10 km using an LC connector and a center wavelength of 1310nm. Key specs include a maximum transmit power of -3.0dBm, receive sensitivity of -20.0dBm, and operating temperature range of 0-70°C. Contact information is provided to purchase or get more information on the SFP-GE-LX10-C module.
huawei-le2mgsc40de0-brochure-datasheet.pdf
This document provides specifications for an optical transceiver module used for bidirectional single-mode fiber communication over distances up to 40 km. Key details include:
- Model LE2MGSC40DE0, an eSFP form factor module transmitting at 1310 nm and receiving at 1490 nm
- Data rate of 1 Gbps over single-mode fiber with receiver sensitivity of -23 dBm
- Temperature operating range of 0-70 degrees Celsius
- Must be used with a matching transmit/receive pair (e.g. LE2MGSC40DE0 with LE2MGSC40ED0) for bidirectional communication over a single fiber
huawei-le2mgsc40ed0-brochure-datasheet.pdf
This document provides specifications for the LE2MGSC40ED0 optical transceiver module. It is an eSFP Gigabit Ethernet bidirectional single-mode transceiver that operates at 1 Gbps over 40 km of single-mode fiber. It transmits at 1490 nm and receives at 1310 nm. Key specs include an operating temperature range of 0-70°C, maximum transmit power of 3.0 dBm, receive sensitivity of -23 dBm, and must be used with an LE2MGSC40DE0 module for bidirectional operation. Contact information is provided to purchase or get more information.
huawei-sfp-10g-bxd1-brochure-datasheet.pdf
The SFP-10G-BXD1 is a 10GBase bidirectional optical transceiver module that uses a single fiber for both transmission and reception. It has an LC connector, works with single-mode fiber up to 10km, and uses wavelengths of 1270nm for reception and 1330nm for transmission. The module has an SFP+ form factor and complies with the 10GBASE-BX standard. It is available for purchase online from www.hi-network.com.
huawei-sfp-fe-lx-sm1550-bidi-brochure-datasheet.pdf
The SFP-FE-LX-SM1550-BIDI is an optical transceiver module that transmits at 1550nm and receives at 1310nm over single-mode fiber for up to 15km. It uses an LC connector in an eSFP form factor to transmit and receive data at 100Mbps in a bi-directional configuration, requiring another SFP-FE-LX-SM1310-BIDI module to pair with.
Recommended
huawei-sfp-ge-lx-sm1490-bidi-brochure-datasheet.pdf
This document provides specifications for the SFP-GE-LX-SM1490-BIDI optical transceiver module. It transmits at 1490 nm and receives at 1310 nm, with a maximum transmission distance of 10 km over single-mode fiber. Key features include an eSFP form factor, 1 Gbps transmission speed, and an operating temperature range of 0-70°C. It uses bidirectional single-fiber technology and must be paired with an SFP-GE-LX-SM1310-BIDI module for full-duplex communication over a single fiber.
huawei-sfp-ge-bxu1-sc-brochure-datasheet.pdf
This document provides specifications for an SFP-GE-BXU1-SC optical transceiver module. It operates at 1 Gbps over 10km of single-mode fiber using 1310nm and 1490nm center wavelengths for receive and transmit. The module supports bi-directional single fiber communication and has an SC connector interface in an SFP form factor. It is intended for use in GE networks and has an operating temperature range of 0°C to 70°C. Contact information is provided to purchase modules from HI-NETWORK.COM.
huawei-s-sfp-ge-lh80-sm1550-brochure-datasheet.pdf
The document provides specifications for an S-SFP-GE-LH80-SM1550 optical transceiver module. It is an eSFP form factor single-mode module that operates at 1550nm wavelengths over distances up to 80km on single-mode fiber. Key specs include a transmission rate of 1Gbps, LC connectors, 5.0dBm maximum transmit power, -23dBm receive sensitivity, and an operating temperature range of 0-70°C. More information is available by contacting the supplier.
huawei-sfp-ge-lx10-c-brochure-datasheet.pdf
The document provides specifications for an SFP-GE-LX10-C optical transceiver module. It operates at 1 Gbit/s over single-mode fiber for up to 10 km using an LC connector and a center wavelength of 1310nm. Key specs include a maximum transmit power of -3.0dBm, receive sensitivity of -20.0dBm, and operating temperature range of 0-70°C. Contact information is provided to purchase or get more information on the SFP-GE-LX10-C module.
huawei-le2mgsc40de0-brochure-datasheet.pdf
This document provides specifications for an optical transceiver module used for bidirectional single-mode fiber communication over distances up to 40 km. Key details include:
- Model LE2MGSC40DE0, an eSFP form factor module transmitting at 1310 nm and receiving at 1490 nm
- Data rate of 1 Gbps over single-mode fiber with receiver sensitivity of -23 dBm
- Temperature operating range of 0-70 degrees Celsius
- Must be used with a matching transmit/receive pair (e.g. LE2MGSC40DE0 with LE2MGSC40ED0) for bidirectional communication over a single fiber
huawei-le2mgsc40ed0-brochure-datasheet.pdf
This document provides specifications for the LE2MGSC40ED0 optical transceiver module. It is an eSFP Gigabit Ethernet bidirectional single-mode transceiver that operates at 1 Gbps over 40 km of single-mode fiber. It transmits at 1490 nm and receives at 1310 nm. Key specs include an operating temperature range of 0-70°C, maximum transmit power of 3.0 dBm, receive sensitivity of -23 dBm, and must be used with an LE2MGSC40DE0 module for bidirectional operation. Contact information is provided to purchase or get more information.
huawei-sfp-10g-bxd1-brochure-datasheet.pdf
The SFP-10G-BXD1 is a 10GBase bidirectional optical transceiver module that uses a single fiber for both transmission and reception. It has an LC connector, works with single-mode fiber up to 10km, and uses wavelengths of 1270nm for reception and 1330nm for transmission. The module has an SFP+ form factor and complies with the 10GBASE-BX standard. It is available for purchase online from www.hi-network.com.
huawei-sfp-fe-lx-sm1550-bidi-brochure-datasheet.pdf
The SFP-FE-LX-SM1550-BIDI is an optical transceiver module that transmits at 1550nm and receives at 1310nm over single-mode fiber for up to 15km. It uses an LC connector in an eSFP form factor to transmit and receive data at 100Mbps in a bi-directional configuration, requiring another SFP-FE-LX-SM1310-BIDI module to pair with.
huawei-sfp-10g-zr-brochure-datasheet.pdf
The document provides specifications for an SFP-10G-ZR optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 80km. The module uses an LC connector and works with 1550nm lasers. It has an operating temperature range of 0-70°C and complies with the 10GBASE-ZR standard. The document includes details on transmission rates, optical power levels, and how to purchase.
huawei-osx080n03-brochure-datasheet.pdf
This document provides specifications for the OSX080N03 optical transceiver module. It operates at 1550nm wavelength for distances up to 80km over single mode fiber. Key specs include a transmission rate of 9.953-10.3125 Gbit/s, maximum transmit power of 4dBm, receiver sensitivity of -24dBm, and operating temperature range of 0-70°C. The document also provides contact information for the manufacturer to purchase or get more information on the product.
huawei-sfp-10g-lr-c-brochure-datasheet.pdf
This document provides information about an SFP-10G-LR-C optical transceiver module. It operates at 10Gbps over single-mode fiber for up to 10km. Key specifications include a center wavelength of 1310nm, maximum transmit power of 0.5dBm, and receive sensitivity of -12.6dBm. The document includes details on its form factor, standards compliance, optical and electrical characteristics, and instructions to contact the manufacturer for purchase or additional information.
huawei-cwdm-sfpge-1511-brochure-datasheet.pdf
The document provides specifications for the CWDM-SFPGE-1511 optical transceiver module. It transmits at 1 Gbit/s over single-mode fiber at a wavelength of 1511nm with a transmission distance of up to 80km. Key specs include a maximum transmit power of 5.0dBm, receiver sensitivity of -28.0dBm, and operating temperature range of 0-70°C. It has an LC connector and uses an eSFP form factor. More information is available by contacting the supplier.
huawei-sfp-10g-zcw1511-brochure-datasheet.pdf
The document provides specifications for an SFP-10G-ZCW1511 optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 70km. The module has an LC connector, transmits at a center wavelength of 1511nm, and has a receive sensitivity of -23.0dBm. It is compliant with the 10G-CWDM standard and has an operating temperature range of 0-70°C. For more information or purchase inquiries, contact Hi-Network.com.
huawei-sfp-10g-zcw1551-brochure-datasheet.pdf
The document provides specifications for an SFP-10G-ZCW1551 optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 70km. The module has an LC connector, works at a center wavelength of 1551nm, and has an operating temperature range of 0-70°C. It can be purchased from www.hi-network.com, with technical support available by emailing info@hi-network.com.
huawei-sfp-10g-zcw1611-brochure-datasheet.pdf
The document provides specifications for an SFP-10G-ZCW1611 optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 70km. The module has an LC connector, transmits at a center wavelength of 1611nm, and has an Rx sensitivity of -23.0dBm. It is a CWDM SFP+ module that works from 0-70°C and complies with the 10G-CWDM standard. For more information or purchase inquiries, contact Hi-Network via their website or offices in Hong Kong and Hangzhou.
huawei-cwdm-sfpge-1611-brochure-datasheet.pdf
The document provides specifications for the CWDM-SFPGE-1611 optical transceiver module. It operates at 1 Gbps with a transmission distance of up to 80 km on single-mode fiber. The module has an LC connector, transmits at a center wavelength of 1611 nm, and has a receiving sensitivity of -28.0 dBm. It is an enhanced small form-factor pluggable (eSFP) module that supports coarse wavelength-division multiplexing (CWDM).
huawei-sfp-10g-zcw1571-brochure-datasheet.pdf
The document provides specifications for an SFP-10G-ZCW1571 optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 70km. The module has an LC connector, transmits at 1571nm wavelength with a maximum power of 4.0dBm, and has a receiver sensitivity of -23.0dBm. It complies with the 10G-CWDM standard and works in temperatures from 0-70°C. For more information or purchase, contact Hi-Network using the contact details provided.
huawei-cwdm-sfpge-1551-brochure-datasheet.pdf
The document provides specifications for the CWDM-SFPGE-1551 optical transceiver module. It operates at 1551nm wavelength over single-mode fiber with a maximum transmission distance of 80km. Key specs include a transmission rate of 1Gbps, maximum transmit power of 5.0dBm, receiver sensitivity of -28.0dBm, and operating temperature range of 0-70°C. The module has an LC connector and eSFP form factor, complying with GE-CWDM standards. More information is available by contacting Hi-Network.com.
huawei-cwdm-sfpge-1531-brochure-datasheet.pdf
The document provides specifications for the CWDM-SFPGE-1531 optical transceiver module. It transmits at 1 Gbit/s over single-mode fiber at a center wavelength of 1531nm with a maximum transmission distance of 80km. Key specs include a maximum transmit power of 5.0dBm, receiver sensitivity of -28.0dBm, and operating temperature range of 0-70°C. The document contains details on part numbers, connectors, protocols, and contact information to purchase.
huawei-sfp-10g-zcw1471-brochure-datasheet.pdf
The document provides specifications for an SFP-10G-ZCW1471 optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 70km. The module uses an LC connector and has a center wavelength of 1471nm. It also lists the optical power, sensitivity and temperature range specifications. Contact information is provided to inquire further about purchasing the module from Hi-Network.
huawei-sfp-10g-zcw1531-brochure-datasheet.pdf
The document provides specifications for an SFP-10G-ZCW1531 optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 70km. The module has an LC connector, transmits at 1531nm wavelength with a maximum power of 4.0dBm, and has a receiver sensitivity of -23.0dBm. It complies with the 10G-CWDM standard and works in temperatures from 0-70°C. For more information or purchase, contact Hi-Network.com.
huawei-sfp-10g-zcw1591-brochure-datasheet.pdf
The document provides specifications for an SFP-10G-ZCW1591 optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 70km. The module has an LC connector, transmits at a center wavelength of 1591nm, and has an Rx sensitivity of -23.0dBm. It is a CWDM SFP+ module that works from 0-70°C and complies with the 10G-CWDM standard. For more information or purchase, contact Hi-Network.com.
huawei-omxd30000-brochure-datasheet.pdf
The document is a datasheet for an OMXD30000 optical transceiver module. It is an SFP+ 10G multi-mode module that operates at 850nm over distances up to 0.3km using LC connectors. The module complies with the 10GBASE-SR standard and works in temperatures from 0°C to 70°C. It can be used in various Huawei switch models to provide 10G connectivity over multi-mode fiber.
huawei-sfp-10g-ilr-brochure-datasheet.pdf
The document provides specifications for an SFP-10G-iLR optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 1.4km. The module has an LC connector, works from -40°C to 85°C, and has a center wavelength of 1310nm. It complies with the 10GBASE-iLR standard and provides optical power levels and receiver sensitivity within standard ranges. The document provides contact information to purchase the module from HI-Network.
huawei-cwdm-sfpge-1591-brochure-datasheet.pdf
This document provides specifications for the CWDM-SFPGE-1591 optical transceiver module. It operates at 1 Gbps with a transmission distance of 80 km on single-mode fiber. The module has an LC connector, works from 0-70°C, and has a center wavelength of 1591 nm. It can transmit with an optical power between 0-5 dBm and receive sensitivity down to -28 dBm. Contact information is provided to inquire further about purchasing this CWDM optical module.
huawei-cwdm-sfpge-1571-brochure-datasheet.pdf
This document provides specifications for the CWDM-SFPGE-1571 optical transceiver module. It operates at 1 Gbps with a transmission distance of 80 km on single-mode fiber. The module has an LC connector, works from 0-70°C, and has a center wavelength of 1571 nm. It can transmit with an optical power between 0-5 dBm and receive sensitivity down to -28 dBm. Contact information is provided to inquire further.
huawei-sfp-10g-zcw1491-brochure-datasheet.pdf
This document provides specifications for an SFP-10G-ZCW1491 optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 70km. The module has an LC connector, transmits at a center wavelength of 1491nm, and has an Rx sensitivity of -23.0dBm. It is compliant with the 10G-CWDM standard and has an operating temperature range of 0-70°C. For more information or purchase inquiries, contact Hi-Network.com.
huawei-cwdm-sfpge-1471-brochure-datasheet.pdf
The CWDM-SFPGE-1471 is an eSFP optical transceiver module that operates at 1 Gbps with a maximum transmission distance of 80 km over single-mode fiber. It has an operating wavelength of 1471 nm and uses an LC connector interfacing with single-mode fiber. Key specifications include a maximum transmit power of 5.0 dBm, receiver sensitivity of -28.0 dBm, and minimum extinction ratio of 8.5 dB. It is designed for GE-CWDM applications to provide cost-effective connectivity in CWDM networks.
huawei-s5735-l48t4s-a-v2-brochure-datasheet.pdf
This document provides specifications for the Huawei S5735-L48T4S-A-V2 network switch. It has 48 10/100/1000BASE-T ports and 4 Gigabit SFP ports, with 2GB memory, 1GB flash storage, and no PoE support. Key specifications include dimensions of 43.6 x 442 x 220 mm, weight of 2.71kg, power consumption of 36.15W typical and 43.3W maximum, and an operating temperature range of -5°C to 50°C. The document also provides purchase and support contact information for the equipment supplier.
huawei-s5735-l48p4xe-a-v2-brochure-datasheet.pdf
The document provides specifications for the Huawei S5735-L48P4XE-A-V2 network switch. It has 48 10/100/1000BASE-T ports, 4 10GE SFP+ ports, and 2 12GE stack ports. Key specifications include dimensions, weight, memory, power consumption, temperature tolerance, and certifications. It is described as supporting flexible Ethernet networking, various security controls, and easy operation and maintenance. The switch is suitable for industries like healthcare, retail, mining and the internet by providing high performance and service processing capabilities.
More Related Content
Similar to huawei-sfp-ge-lx-sm1310-bidi-brochure-datasheet.pdf
huawei-sfp-10g-zr-brochure-datasheet.pdf
The document provides specifications for an SFP-10G-ZR optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 80km. The module uses an LC connector and works with 1550nm lasers. It has an operating temperature range of 0-70°C and complies with the 10GBASE-ZR standard. The document includes details on transmission rates, optical power levels, and how to purchase.
huawei-osx080n03-brochure-datasheet.pdf
This document provides specifications for the OSX080N03 optical transceiver module. It operates at 1550nm wavelength for distances up to 80km over single mode fiber. Key specs include a transmission rate of 9.953-10.3125 Gbit/s, maximum transmit power of 4dBm, receiver sensitivity of -24dBm, and operating temperature range of 0-70°C. The document also provides contact information for the manufacturer to purchase or get more information on the product.
huawei-sfp-10g-lr-c-brochure-datasheet.pdf
This document provides information about an SFP-10G-LR-C optical transceiver module. It operates at 10Gbps over single-mode fiber for up to 10km. Key specifications include a center wavelength of 1310nm, maximum transmit power of 0.5dBm, and receive sensitivity of -12.6dBm. The document includes details on its form factor, standards compliance, optical and electrical characteristics, and instructions to contact the manufacturer for purchase or additional information.
huawei-cwdm-sfpge-1511-brochure-datasheet.pdf
The document provides specifications for the CWDM-SFPGE-1511 optical transceiver module. It transmits at 1 Gbit/s over single-mode fiber at a wavelength of 1511nm with a transmission distance of up to 80km. Key specs include a maximum transmit power of 5.0dBm, receiver sensitivity of -28.0dBm, and operating temperature range of 0-70°C. It has an LC connector and uses an eSFP form factor. More information is available by contacting the supplier.
huawei-sfp-10g-zcw1511-brochure-datasheet.pdf
The document provides specifications for an SFP-10G-ZCW1511 optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 70km. The module has an LC connector, transmits at a center wavelength of 1511nm, and has a receive sensitivity of -23.0dBm. It is compliant with the 10G-CWDM standard and has an operating temperature range of 0-70°C. For more information or purchase inquiries, contact Hi-Network.com.
huawei-sfp-10g-zcw1551-brochure-datasheet.pdf
The document provides specifications for an SFP-10G-ZCW1551 optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 70km. The module has an LC connector, works at a center wavelength of 1551nm, and has an operating temperature range of 0-70°C. It can be purchased from www.hi-network.com, with technical support available by emailing info@hi-network.com.
huawei-sfp-10g-zcw1611-brochure-datasheet.pdf
The document provides specifications for an SFP-10G-ZCW1611 optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 70km. The module has an LC connector, transmits at a center wavelength of 1611nm, and has an Rx sensitivity of -23.0dBm. It is a CWDM SFP+ module that works from 0-70°C and complies with the 10G-CWDM standard. For more information or purchase inquiries, contact Hi-Network via their website or offices in Hong Kong and Hangzhou.
huawei-cwdm-sfpge-1611-brochure-datasheet.pdf
The document provides specifications for the CWDM-SFPGE-1611 optical transceiver module. It operates at 1 Gbps with a transmission distance of up to 80 km on single-mode fiber. The module has an LC connector, transmits at a center wavelength of 1611 nm, and has a receiving sensitivity of -28.0 dBm. It is an enhanced small form-factor pluggable (eSFP) module that supports coarse wavelength-division multiplexing (CWDM).
huawei-sfp-10g-zcw1571-brochure-datasheet.pdf
The document provides specifications for an SFP-10G-ZCW1571 optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 70km. The module has an LC connector, transmits at 1571nm wavelength with a maximum power of 4.0dBm, and has a receiver sensitivity of -23.0dBm. It complies with the 10G-CWDM standard and works in temperatures from 0-70°C. For more information or purchase, contact Hi-Network using the contact details provided.
huawei-cwdm-sfpge-1551-brochure-datasheet.pdf
The document provides specifications for the CWDM-SFPGE-1551 optical transceiver module. It operates at 1551nm wavelength over single-mode fiber with a maximum transmission distance of 80km. Key specs include a transmission rate of 1Gbps, maximum transmit power of 5.0dBm, receiver sensitivity of -28.0dBm, and operating temperature range of 0-70°C. The module has an LC connector and eSFP form factor, complying with GE-CWDM standards. More information is available by contacting Hi-Network.com.
huawei-cwdm-sfpge-1531-brochure-datasheet.pdf
The document provides specifications for the CWDM-SFPGE-1531 optical transceiver module. It transmits at 1 Gbit/s over single-mode fiber at a center wavelength of 1531nm with a maximum transmission distance of 80km. Key specs include a maximum transmit power of 5.0dBm, receiver sensitivity of -28.0dBm, and operating temperature range of 0-70°C. The document contains details on part numbers, connectors, protocols, and contact information to purchase.
huawei-sfp-10g-zcw1471-brochure-datasheet.pdf
The document provides specifications for an SFP-10G-ZCW1471 optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 70km. The module uses an LC connector and has a center wavelength of 1471nm. It also lists the optical power, sensitivity and temperature range specifications. Contact information is provided to inquire further about purchasing the module from Hi-Network.
huawei-sfp-10g-zcw1531-brochure-datasheet.pdf
The document provides specifications for an SFP-10G-ZCW1531 optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 70km. The module has an LC connector, transmits at 1531nm wavelength with a maximum power of 4.0dBm, and has a receiver sensitivity of -23.0dBm. It complies with the 10G-CWDM standard and works in temperatures from 0-70°C. For more information or purchase, contact Hi-Network.com.
huawei-sfp-10g-zcw1591-brochure-datasheet.pdf
The document provides specifications for an SFP-10G-ZCW1591 optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 70km. The module has an LC connector, transmits at a center wavelength of 1591nm, and has an Rx sensitivity of -23.0dBm. It is a CWDM SFP+ module that works from 0-70°C and complies with the 10G-CWDM standard. For more information or purchase, contact Hi-Network.com.
huawei-omxd30000-brochure-datasheet.pdf
The document is a datasheet for an OMXD30000 optical transceiver module. It is an SFP+ 10G multi-mode module that operates at 850nm over distances up to 0.3km using LC connectors. The module complies with the 10GBASE-SR standard and works in temperatures from 0°C to 70°C. It can be used in various Huawei switch models to provide 10G connectivity over multi-mode fiber.
huawei-sfp-10g-ilr-brochure-datasheet.pdf
The document provides specifications for an SFP-10G-iLR optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 1.4km. The module has an LC connector, works from -40°C to 85°C, and has a center wavelength of 1310nm. It complies with the 10GBASE-iLR standard and provides optical power levels and receiver sensitivity within standard ranges. The document provides contact information to purchase the module from HI-Network.
huawei-cwdm-sfpge-1591-brochure-datasheet.pdf
This document provides specifications for the CWDM-SFPGE-1591 optical transceiver module. It operates at 1 Gbps with a transmission distance of 80 km on single-mode fiber. The module has an LC connector, works from 0-70°C, and has a center wavelength of 1591 nm. It can transmit with an optical power between 0-5 dBm and receive sensitivity down to -28 dBm. Contact information is provided to inquire further about purchasing this CWDM optical module.
huawei-cwdm-sfpge-1571-brochure-datasheet.pdf
This document provides specifications for the CWDM-SFPGE-1571 optical transceiver module. It operates at 1 Gbps with a transmission distance of 80 km on single-mode fiber. The module has an LC connector, works from 0-70°C, and has a center wavelength of 1571 nm. It can transmit with an optical power between 0-5 dBm and receive sensitivity down to -28 dBm. Contact information is provided to inquire further.
huawei-sfp-10g-zcw1491-brochure-datasheet.pdf
This document provides specifications for an SFP-10G-ZCW1491 optical transceiver module. It operates at 10Gbps over single-mode fiber with a transmission distance of up to 70km. The module has an LC connector, transmits at a center wavelength of 1491nm, and has an Rx sensitivity of -23.0dBm. It is compliant with the 10G-CWDM standard and has an operating temperature range of 0-70°C. For more information or purchase inquiries, contact Hi-Network.com.
huawei-cwdm-sfpge-1471-brochure-datasheet.pdf
The CWDM-SFPGE-1471 is an eSFP optical transceiver module that operates at 1 Gbps with a maximum transmission distance of 80 km over single-mode fiber. It has an operating wavelength of 1471 nm and uses an LC connector interfacing with single-mode fiber. Key specifications include a maximum transmit power of 5.0 dBm, receiver sensitivity of -28.0 dBm, and minimum extinction ratio of 8.5 dB. It is designed for GE-CWDM applications to provide cost-effective connectivity in CWDM networks.
Similar to huawei-sfp-ge-lx-sm1310-bidi-brochure-datasheet.pdf (20)
More from Hi-Network.com
huawei-s5735-l48t4s-a-v2-brochure-datasheet.pdf
This document provides specifications for the Huawei S5735-L48T4S-A-V2 network switch. It has 48 10/100/1000BASE-T ports and 4 Gigabit SFP ports, with 2GB memory, 1GB flash storage, and no PoE support. Key specifications include dimensions of 43.6 x 442 x 220 mm, weight of 2.71kg, power consumption of 36.15W typical and 43.3W maximum, and an operating temperature range of -5°C to 50°C. The document also provides purchase and support contact information for the equipment supplier.
huawei-s5735-l48p4xe-a-v2-brochure-datasheet.pdf
The document provides specifications for the Huawei S5735-L48P4XE-A-V2 network switch. It has 48 10/100/1000BASE-T ports, 4 10GE SFP+ ports, and 2 12GE stack ports. Key specifications include dimensions, weight, memory, power consumption, temperature tolerance, and certifications. It is described as supporting flexible Ethernet networking, various security controls, and easy operation and maintenance. The switch is suitable for industries like healthcare, retail, mining and the internet by providing high performance and service processing capabilities.
huawei-s5735-l48lp4xe-a-v2-brochure-datasheet.pdf
The document provides specifications for the Huawei CloudEngine S5735-L-V2 series switch model S5735-L48LP4XE-A-V2. It has 48 10/100/1000BASE-T ports, 4 10GE SFP+ ports, 2 12GE stack ports, and PoE+. It is intended for use in industries such as healthcare, retail, mining and the internet. The document provides details on its physical dimensions, memory, power consumption, certifications and contact information for purchasing.
huawei-s5735-l48lp4s-a-v2-brochure-datasheet.pdf
The document provides specifications for the Huawei S5735-L48LP4S-A-V2 network switch. It has 48 10/100/1000BASE-T ports, 4 Gigabit SFP ports, support for PoE+, and is powered by a built-in AC power supply. Key specifications include dimensions, weight, memory, power consumption, temperature ranges, certifications, and contact information for purchasing.
huawei-s5735-l24t4xe-a-v2-brochure-datasheet.pdf
The document provides an overview, quick specification, and additional details about the Huawei CloudEngine S5735-L-V2 series switch model S5735-L24T4XE-A-V2. It includes specifications such as its dimensions, weight, memory, ports, power consumption, temperature ranges, certifications and more. It also provides contact information for any questions and to purchase the switches from HI-NETWORK.COM.
huawei-s5735-l24t4s-a-v2-brochure-datasheet.pdf
This document provides specifications for the Huawei S5735-L24T4S-A-V2 network switch. It has 24 10/100/1000BASE-T ports and 4 Gigabit SFP ports, with no PoE support. Key specifications include dimensions of 43.6 x 442 x 220 mm, weight of 3.44 kg, memory of 2GB and 1GB flash. It has typical power consumption of 26.37W and supports common Layer 3 routing protocols. Contact information is provided to purchase or get more information from the supplier.
huawei-s5735-l24p4xe-a-v2-brochure-datasheet.pdf
The document provides specifications for the Huawei S5735-L24P4XE-A-V2 network switch. It has 24 10/100/1000BASE-T ports, 4 10GE SFP+ ports, and 2 12GE stack ports. It supports PoE+ and has a built-in AC power supply. Key specifications include its small form factor of 1U, typical power consumption of 39.84W, 2GB memory, and support for multiple Layer 3 routing protocols. It is suitable for industries like healthcare, retail, and mining by providing high-performance networking and security controls.
huawei-s5735-l24p4s-a-v2-brochure-datasheet.pdf
This document provides specifications for the Huawei S5735-L24P4S-A-V2 network switch. It has 24 10/100/1000BASE-T ports and 4 Gigabit SFP ports, supports PoE+, and has a built-in AC power supply. The switch is 1U in size, has 2GB of memory and 1GB of flash storage. It is suitable for applications in industries such as healthcare, retail, mining and the internet by providing routing, security controls and easy management capabilities. Technical specifications include dimensions, weight, power consumption, temperature ranges, certifications and more. Contact information is provided to purchase the switch.
huawei-s5735-l16t4s-a-v2-brochure-datasheet.pdf
This document provides information on the Huawei S5735-L16T4S-A-V2 network switch, including its specifications and features. It has 16 10/100/1000BASE-T ports and 4 Gigabit SFP ports, supports multiple Layer 3 routing protocols, and is suitable for industries like healthcare, retail, and mining. The switch has 2GB memory, 1GB flash storage, dimensions of 43.6 x 442 x 220 mm, and a weight of 3.34kg. It provides various security controls and easy operation and maintenance. Contact information is provided to purchase the switch from HI-Network.
huawei-s5735-l16t4s-a-v2-brochure-datasheet.pdf
This document provides information on the Huawei S5735-L16T4S-A-V2 network switch. It has 16 10/100/1000BASE-T ports and 4 Gigabit SFP ports, supports multiple Layer 3 routing protocols, and is suitable for industries like healthcare, retail, and mining. The specifications include its dimensions, weight, memory, power consumption, temperature tolerance, certifications and more. It also provides contact information for purchasing.
huawei-s5735-l16t4s-a-v2-brochure-datasheet.pdf
This document provides information on the Huawei S5735-L16T4S-A-V2 network switch. It has 16 10/100/1000BASE-T ports and 4 Gigabit SFP ports with built-in AC power. Key specifications include dimensions, weight, memory, power consumption, temperature tolerance, and certifications. It is suitable for industries like healthcare, retail, and mining by supporting multiple Layer 3 routing protocols and providing high performance processing. For purchase or additional information, contact the company at the listed phone numbers or email.
huawei-s5735-l8t4s-a-v2-brochure-datasheet.pdf
This document provides information on the Huawei S5735-L8T4S-A-V2 network switch, including its specifications, features, dimensions, ports, memory, power requirements and price. It is an 8-port Gigabit Ethernet switch with 4 small form-factor pluggable (SFP) fiber ports that supports various routing protocols and security controls. It is suitable for industries like healthcare, retail and mining by providing high-performance networking and service processing capabilities. The document also provides contact information to purchase the switch from the supplier.
huawei-s5735-l8p4s-a-v2-brochure-datasheet.pdf
The document provides specifications for the Huawei S5735-L8P4S-A-V2 network switch. It has 8 10/100/1000BASE-T ports, 4 Gigabit SFP ports, supports PoE+, and has a built-in AC power supply. Key specifications include its small size of 1U, support for multiple Layer 3 routing protocols, up to 125W of PoE power, and a maximum non-PoE power consumption of 25.09W. The document provides contact information for ordering and technical support questions.
cisco-air-cap3702p-z-k9-datasheet.pdf
The AIR-AP3702P-Z-K9 is a Cisco wireless access point that provides WiFi connectivity and requires a wireless controller. It supports 802.11ac WiFi and has 4 external antenna ports. It has Gigabit Ethernet and console ports, supports up to 13dBi antenna gains, and has dimensions of 8.7 x 8.7 x 2.11 inches. It can be used with additional modules like the Hyperlocation module for location services and wireless security.
cisco-air-cap3702p-t-k9-datasheet.pdf
The AIR-CAP3702P-T-K9 is a Cisco wireless access point that requires a wireless controller. It has 4x4 MIMO and three spatial streams, providing wireless connectivity at speeds up to 1.3 Gbps. It supports common wireless standards including 802.11ac, 802.11n, and 802.11a/b/g. The access point has external antenna connectors, Gigabit Ethernet interfaces, and dimensions of 8.7 x 8.7 x 2.11 inches. It is suitable for enterprise wireless networks and comes with a limited lifetime hardware warranty.
cisco-air-cap3702p-s-k9-datasheet.pdf
The AIR-AP3702P-S-K9 is a Cisco wireless access point that requires a wireless controller. It has a 4x4 MIMO configuration with 3 spatial streams and supports wireless standards up to 802.11ac Wave 1. It has external antenna connectors and an S regulatory domain. Key specifications include support for 1.3Gbps data rates, 512MB of RAM, and dimensions of 8.7 x 8.7 x 2.11 inches. It can be purchased from HI-NETWORK.COM, which offers global shipping of networking equipment.
cisco-air-cap3702p-r-k9-datasheet.pdf
The AIR-CAP3702P-R-K9 is a Cisco 802.11ac wireless access point that requires a wireless controller. It has 4x4 MIMO and three spatial streams, with support for 20, 40, and 80 MHz channels and data rates up to 1.3 Gbps. It has external antenna connectors, 10/100/1000BASE-T Ethernet interfaces, and dimensions of 8.7 x 8.7 x 2.11 inches. It operates in the 2.4 GHz and 5 GHz bands with multiple channels depending on region.
cisco-air-cap3702p-q-k9-datasheet.pdf
The AIR-CAP3702P-Q-K9 is a Cisco wireless access point that provides:
1) 4x4 MIMO with three spatial streams for high-density wireless connectivity.
2) External antenna connections and support for antenna gains up to 13 dBi.
3) Dual-band 802.11ac wireless connectivity across both the 2.4GHz and 5GHz bands.
cisco-air-cap3702p-n-k9-datasheet.pdf
The AIR-CAP3702P-N-K9 is a Cisco wireless access point that provides:
1) 4x4 MIMO with three spatial streams for high-density wireless connectivity.
2) External antenna connections and support for antenna gains up to 13 dBi.
3) Interfaces including 10/100/1000BASE-T, management port, and optional modules.
cisco-air-cap3702p-k-k9-datasheet.pdf
The AIR-CAP3702P-K-K9 is a Cisco 802.11ac wireless access point that requires a wireless controller. It has 4x4 MIMO and 3 spatial streams, with data rates up to 1.3Gbps. It has external antenna connectors and operates in the K regulatory domain. Module options include a wireless security module and Cisco small cell modules.
More from Hi-Network.com (20)
Recently uploaded
留学学历(UoA毕业证)奥克兰大学毕业证成绩单官方原版办理
制做办理奥克兰大学学历证书＜176555708微信＞【毕业证明信-推荐信做学费单＞【微信176555708】【制作UoA毕业证文凭认证奥克兰大学毕业证成绩单购买】【UoA毕业证书】{奥克兰大学文凭购买}】成绩单，录取通知书，Offer，在读证明，雅思托福成绩单，真实大使馆教育部认证，回国人员证明，＞【制作UoA毕业证文凭认证奥克兰大学毕业证成绩单购买】【UoA毕业证书】{奥克兰大学文凭购买}留信网认证。
奥克兰大学学历证书＜微信176555708（一对一服务包括毕业院长签字,专业课程,学位类型,专业或教育领域,以及毕业日期.不要忽视这些细节.这两份文件同样重要!毕业证成绩单文凭留信网学历认证！）[留学文凭学历认证(留信认证使馆认证)奥克兰大学毕业证成绩单毕业证证书大学Offer请假条成绩单语言证书国际回国人员证明高仿教育部认证申请学校等一切高仿或者真实可查认证服务。
多年留学服务公司,拥有海外样板无数能完美1:1还原海外各国大学degreeDiplomaTranscripts等毕业材料。海外大学毕业材料都有哪些工艺呢？工艺难度主要由：烫金.钢印.底纹.水印.防伪光标.热敏防伪等等组成。而且我们每天都在更新海外文凭的样板以求所有同学都能享受到完美的品质服务。
国外毕业证学位证成绩单办理方法：
1客户提供办理奥克兰大学奥克兰大学硕士毕业证成绩单信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
— — — — 我们是挂科和未毕业同学们的福音我们是实体公司精益求精的工艺！ — — — -
一真实留信认证的作用(私企外企荣誉的见证):
1：该专业认证可证明留学生真实留学身份同时对留学生所学专业等级给予评定。
2：国家专业人才认证中心颁发入库证书这个入网证书并且可以归档到地方。
3：凡是获得留信网入网的信息将会逐步更新到个人身份内将在公安部网内查询个人身份证信息后同步读取人才网入库信息。
4：个人职称评审加20分个人信誉贷款加10分。
5：在国家人才网主办的全国网络招聘大会中纳入资料供国家500强等高端企业选择人才。
办理毕业证(UPenn毕业证)宾夕法尼亚大学毕业证成绩单快速办理
官方原版办理宾夕法尼亚大学毕业证【微信176555708】学历认证怎么做：原版仿制宾夕法尼亚大学电子版成绩单毕业证认证【宾夕法尼亚大学毕业证成绩单】、宾夕法尼亚大学文凭证书成绩单复刻offer录取通知书、购买UPenn圣力嘉学院本科毕业证、【宾夕法尼亚大学毕业证办理UPenn毕业证书哪里买】、宾夕法尼亚大学 Offer在线办理UPenn Offer宾夕法尼亚大学Bachloer Degree。（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
学历顾问：微信：176555708
办理毕业证(NYU毕业证)纽约大学毕业证成绩单官方原版办理
退学买【纽约大学毕业证认证】【办证微信176555708】【纽约大学文凭毕业证制作】【NYU学历学位证书哪里买】办理纽约大学学位证书扫描件、办理纽约大学雅思证书！
国际留学归国服务中心【如何办纽约大学毕业证认证】【NYU学位证书扫描件哪里买】实体公司，注册经营，行业标杆，精益求精！（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
学历顾问：微信：176555708
Discover the benefits of outsourcing SEO to India
"Discover the benefits of outsourcing SEO to India! From cost-effective services and expert professionals to round-the-clock work advantages, learn how your business can achieve digital success with Indian SEO solutions.
国外证书(Lincoln毕业证)新西兰林肯大学毕业证成绩单不能毕业办理
退学办理新西兰林肯大学毕业证【微信176555708】学历认证怎么做：原版仿制新西兰林肯大学电子版成绩单毕业证认证【新西兰林肯大学毕业证成绩单】、新西兰林肯大学文凭证书成绩单复刻offer录取通知书、购买Lincoln圣力嘉学院本科毕业证、【新西兰林肯大学毕业证办理Lincoln毕业证书哪里买】、新西兰林肯大学 Offer在线办理Lincoln Offer新西兰林肯大学Bachloer Degree。1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：微信176555708我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
7完成交易删除客户资料
高精端提供以下服务：
一：新西兰林肯大学新西兰林肯大学毕业证文凭证书全套材料从防伪到印刷水印底纹到钢印烫金
二：真实使馆认证（留学人员回国证明）使馆存档
三：真实教育部认证教育部存档教育部留服网站可查
四：留信认证留学生信息网站可查
五：与学校颁发的相关证件1:1纸质尺寸制定（定期向各大院校毕业生购买最新版本毕,业证成绩单保证您拿到的是鲁昂大学内部最新版本毕业证成绩单微信176555708）
A.为什么留学生需要操作留信认证?
留信认证全称全国留学生信息服务网认证,隶属于北京中科院。①留信认证门槛条件更低,费用更美丽,并且包过,完单周期短,效率高②留信认证虽然不能去国企,但是一般的公司都没有问题,因为国内很多公司连基本的留学生学历认证都不了解。这对于留学生来说,这就比自己光拿一个证书更有说服力,因为留学学历可以在留信网站上进行查询!
B.为什么我们提供的毕业证成绩单具有使用价值？
查询留服认证是国内鉴别留学生海外学历的唯一途径但认证只是个体行为不是所有留学生都操作所以没有办理认证的留学生的学历在国内也是查询不到的他们也仅仅只有一张文凭。所以这时候我们提供的和学校颁发的一模一样的毕业证成绩单就有了使用价值。
假文凭国外(Adelaide毕业证)澳大利亚国立大学毕业证成绩单办理
购买澳大利亚国立大学毕业证>【微信176555708】办理澳大利亚国立大学毕业证成绩单【微信176555708】Adelaide毕业证成绩单Adelaide学历证书Adelaide文凭【Adelaide毕业套号文凭网认证澳大利亚国立大学毕业证成绩单】【哪里买澳大利亚国立大学毕业证文凭Adelaide成绩学校快递邮寄信封】【开版澳大利亚国立大学文凭】Adelaide留信认证本科硕士学历认证(诚招代理)微信：176555708办理国外高校毕业证成绩单文凭学位证,真实使馆公证（留学回国人员证明）真实留信网认证国外学历学位认证雅思代考国外学校代申请名校保录开请假条改GPA改成绩ID卡
1.高仿业务:【本科硕士】毕业证,成绩单（GPA修改）,学历认证（教育部认证）,大学Offer,,ID,留信认证,使馆认证,雅思,语言证书等高仿类证书；
2.认证服务: 学历认证（教育部认证）,大使馆认证（回国人员证明）,留信认证（可查有编号证书）,大学保录取,雅思保分成绩单。
3.技术服务：钢印水印烫金激光防伪凹凸版设计印刷激凸温感光标底纹镭射速度快。
办理澳大利亚国立大学澳大利亚国立大学毕业证成绩单流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
-办理真实使馆公证（即留学回国人员证明）
-办理各国各大学文凭（世界名校一对一专业服务,可全程监控跟踪进度）
-全套服务：毕业证成绩单真实使馆公证真实教育部认证。让您回国发展信心十足！
（详情请加一下 文凭顾问+微信:176555708）欢迎咨询！
Gen Z and the marketplaces - let's translate their needs
The product workshop focused on exploring the requirements of Generation Z in relation to marketplace dynamics. We delved into their specific needs, examined the specifics in their shopping preferences, and analyzed their preferred methods for accessing information and making purchases within a marketplace. Through the study of real-life cases , we tried to gain valuable insights into enhancing the marketplace experience for Generation Z.
The workshop was held on the DMA Conference in Vienna June 2024.
制作毕业证书(ANU毕业证)莫纳什大学毕业证成绩单官方原版办理
在线办理莫纳什大学毕业证【微信：176555708】(ANU毕业证书)成绩单学位证【微信：176555708】，留信认证（真实可查，永久存档）纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。#一整套莫纳什大学文凭证件办理#—包含莫纳什大学莫纳什大学毕业证文凭证书学历认证|使馆认证|归国人员证明|教育部认证|留信网认证永远存档教育部学历学位认证查询办理国外文凭国外学历学位认证#我们提供全套办理服务。
一整套留学文凭证件服务：
一：莫纳什大学莫纳什大学毕业证文凭证书毕业证 #成绩单等全套材料从防伪到印刷水印底纹到钢印烫金
二：真实使馆认证（留学人员回国证明）使馆存档
三：真实教育部认证教育部存档教育部留服网站永久可查
四：留信认证留学生信息网站永久可查
国外毕业证学位证成绩单办理方法：
1客户提供办理莫纳什大学莫纳什大学毕业证文凭证书信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
教育部文凭学历认证认证的用途：
如果您计划在国内发展那么办理国内教育部认证是必不可少的。事业性用人单位如银行国企公务员在您应聘时都会需要您提供这个认证。其他私营 #外企企业无需提供！办理教育部认证所需资料众多且烦琐所有材料您都必须提供原件我们凭借丰富的经验帮您快速整合材料让您少走弯路。
实体公司专业为您服务如有需要请联系我: 微信176555708
Meet up Milano 14 _ Axpo Italia_ Migration from Mule3 (On-prem) to.pdf
Quattordicesimo Meetup di Milano, tenutosi a Milano il 23 Maggio 2024 dalle ore 17:00 alle ore 18:30 in presenza e da remoto.
Abbiamo parlato di come Axpo Italia S.p.A. ha ridotto il technical debt migrando le proprie APIs da Mule 3.9 a Mule 4.4 passando anche da on-premises a CloudHub 1.0.
Understanding User Behavior with Google Analytics.pdf
Unlocking the full potential of Google Analytics is crucial for understanding and optimizing your website’s performance. This guide dives deep into the essential aspects of Google Analytics, from analyzing traffic sources to understanding user demographics and tracking user engagement.
Traffic Sources Analysis:
Discover where your website traffic originates. By examining the Acquisition section, you can identify whether visitors come from organic search, paid campaigns, direct visits, social media, or referral links. This knowledge helps in refining marketing strategies and optimizing resource allocation.
User Demographics Insights:
Gain a comprehensive view of your audience by exploring demographic data in the Audience section. Understand age, gender, and interests to tailor your marketing strategies effectively. Leverage this information to create personalized content and improve user engagement and conversion rates.
Tracking User Engagement:
Learn how to measure user interaction with your site through key metrics like bounce rate, average session duration, and pages per session. Enhance user experience by analyzing engagement metrics and implementing strategies to keep visitors engaged.
Conversion Rate Optimization:
Understand the importance of conversion rates and how to track them using Google Analytics. Set up Goals, analyze conversion funnels, segment your audience, and employ A/B testing to optimize your website for higher conversions. Utilize ecommerce tracking and multi-channel funnels for a detailed view of your sales performance and marketing channel contributions.
Custom Reports and Dashboards:
Create custom reports and dashboards to visualize and interpret data relevant to your business goals. Use advanced filters, segments, and visualization options to gain deeper insights. Incorporate custom dimensions and metrics for tailored data analysis. Integrate external data sources to enrich your analytics and make well-informed decisions.
This guide is designed to help you harness the power of Google Analytics for making data-driven decisions that enhance website performance and achieve your digital marketing objectives. Whether you are looking to improve SEO, refine your social media strategy, or boost conversion rates, understanding and utilizing Google Analytics is essential for your success.
Explore-Insanony: Watch Instagram Stories Secretly
Instagram has become one of the most popular social media platforms, allowing people to share photos, videos, and stories with their followers. Sometimes, though, you might want to view someone's story without them knowing.
Search Result Showing My Post is Now Buried
Search results burying my post that used to rank before Google's March 2024 algorithm update.
不能毕业如何获得(USYD毕业证)悉尼大学毕业证成绩单一比一原版制作
挂科购买☀【悉尼大学毕业证购买】【微信176555708】【USYD毕业证模板办理】加拿大文凭、本科、硕士、研究生学历都可以做,二、业务范围：
★、全套服务：毕业证、成绩单、化学专业毕业证书伪造【悉尼大学大学毕业证】微信176555708【USYD学位证书购买】◆◆◆◆◆ — — — 归国服务中心 — — -◆◆◆◆◆
【主营项目】
一.毕业证、成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
国外毕业证、学位证、成绩单办理流程：
1、客户提供办理信息：姓名、生日、专业、学位、毕业时间等（如信息不确定可以咨询顾问：【微信176555708】我们有专业老师帮你查询）；
2、开始安排制作毕业证、成绩单电子图；
3、毕业证、成绩单电子版做好以后发送给您确认；
4、毕业证、成绩单电子版您确认信息无误之后安排制作成品；
5、成品做好拍照或者视频给您确认；
6、快递给客户（国内顺丰，国外DHL、UPS等快读邮寄）。
专业服务，请勿犹豫联系我！本公司是留学创业和海归创业者们的桥梁。一次办理，终生受用，一步到位，高效服务。详情请在线咨询办理,欢迎有诚意办理的客户咨询!洽谈。
◆招聘代理：本公司诚聘英国、加拿大、澳洲、新西兰、加拿大、法国、德国、新加坡各地代理人员，如果你有业余时间，有兴趣就请联系我们咨询【微信176555708】
没文凭怎么找工作。让您回国发展信心十足！
★、真实教育部学历学位认证；（一对一专业服务，可全程监控跟踪进度）
★、真实使馆认证，可以通过大使馆查询确认；（即教育部留服认证，不成功不收费）
★、毕业证、成绩单等材料，从防伪到印刷、水印到钢印烫金，高精仿度都是跟学校原版100%相同的；（敬请放心使用）
★、可以提供钢印、水印、烫金、激光防伪、凹凸版、最新版的毕业证、百分之百让您绝对满意、
★、印刷，DHL快递毕业证、成绩单7个工作日，真实大使馆教育部认证1个月。为了达到高水准高效率。
制作原版1:1(Monash毕业证)莫纳什大学毕业证成绩单办理假
退学买莫纳什大学毕业证>【微信176555708】办理莫纳什大学毕业证成绩单【微信176555708】Monash毕业证成绩单Monash学历证书Monash文凭【Monash毕业套号文凭网认证莫纳什大学毕业证成绩单】【哪里买莫纳什大学毕业证文凭Monash成绩学校快递邮寄信封】【开版莫纳什大学文凭】Monash留信认证本科硕士学历认证1:1完美还原海外各大学毕业材料上的工艺：水印阴影底纹钢印LOGO烫金烫银LOGO烫金烫银复合重叠。文字图案浮雕激光镭射紫外荧光温感复印防伪。
可办理以下真实莫纳什大学存档留学生信息存档认证：
1莫纳什大学真实留信网认证（网上可查永久存档无风险百分百成功入库）；
2真实教育部认证（留服）等一切高仿或者真实可查认证服务（暂时不可办理）；
3购买英美真实学籍（不用正常就读直接出学历）；
4英美一年硕士保毕业证项目（保录取学校挂名不用正常就读保毕业）
留学本科/硕士毕业证书成绩单制作流程：
1客户提供办理信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询莫纳什大学莫纳什大学毕业证offer）；
2开始安排制作莫纳什大学毕业证成绩单电子图；
3莫纳什大学毕业证成绩单电子版做好以后发送给您确认；
4莫纳什大学毕业证成绩单电子版您确认信息无误之后安排制作成品；
5莫纳什大学成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）
— — — — — — — — — — — 《文凭顾问微信：176555708》
可查真实(Monash毕业证)西澳大学毕业证成绩单退学买
办理假西澳大学毕业证【微信176555708】购买,办理Monash成绩单,Monash毕业证制作【微信176555708】【西澳大学毕业证】，Monash毕业证购买，Monash学位证，西澳大学学位证【Monash成绩单制作】【Monash毕业证文凭 Monash本科 澳洲学历认证原版制作【diploma certificate degree transcript 】【留信网认证，本科，硕士，海归，博士，排名，成绩单】代办国外（海外）澳洲、韩国、加拿大、新西兰等各大学毕业证。 ?我们对海外大学及学院的毕业证成绩单所使用的材料，尺寸大小，防伪结构（包括：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。 文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）都有原版本文凭对照。#一整套西澳大学文凭证件办理#—包含西澳大学西澳大学毕业证成绩单学历认证|使馆认证|归国人员证明|教育部认证|留信网认证永远存档教育部学历学位认证查询办理国外文凭国外学历学位认证#我们提供全套办理服务。
一整套留学文凭证件服务：
一：西澳大学西澳大学毕业证成绩单毕业证 #成绩单等全套材料从防伪到印刷水印底纹到钢印烫金
二：真实使馆认证（留学人员回国证明）使馆存档
三：真实教育部认证教育部存档教育部留服网站永久可查
四：留信认证留学生信息网站永久可查
国外毕业证学位证成绩单办理方法：
1客户提供办理西澳大学西澳大学毕业证成绩单信息：姓名生日专业学位毕业时间等（如信息不确定可以咨询顾问：我们有专业老师帮你查询）；
2开始安排制作毕业证成绩单电子图；
3毕业证成绩单电子版做好以后发送给您确认；
4毕业证成绩单电子版您确认信息无误之后安排制作成品；
5成品做好拍照或者视频给您确认；
6快递给客户（国内顺丰国外DHLUPS等快读邮寄）。
教育部文凭学历认证认证的用途：
如果您计划在国内发展那么办理国内教育部认证是必不可少的。事业性用人单位如银行国企公务员在您应聘时都会需要您提供这个认证。其他私营 #外企企业无需提供！办理教育部认证所需资料众多且烦琐所有材料您都必须提供原件我们凭借丰富的经验帮您快速整合材料让您少走弯路。
实体公司专业为您服务如有需要请联系我: 微信176555708
Should Repositories Participate in the Fediverse?
Presentation for OR2024 making the case that repositories could play a part in the "fediverse" of distributed social applications
Recently uploaded (20)
Gen Z and the marketplaces - let's translate their needs
Gen Z and the marketplaces - let's translate their needs
Meet up Milano 14 _ Axpo Italia_ Migration from Mule3 (On-prem) to.pdf
Meet up Milano 14 _ Axpo Italia_ Migration from Mule3 (On-prem) to.pdf
Understanding User Behavior with Google Analytics.pdf
Understanding User Behavior with Google Analytics.pdf
Explore-Insanony: Watch Instagram Stories Secretly
Explore-Insanony: Watch Instagram Stories Secretly
huawei-sfp-ge-lx-sm1310-bidi-brochure-datasheet.pdf
- 1. SFP-GE-LX-SM1310-BIDI (02315285) Datasheet Buy Huawei, Cisco, Zte, Hpe, Dell, Fortinet Network Equipment Online In China At Low Price! www.hi-network.com Overview Optical Transceiver, eSFP, GE, BIDI Single-mode Module (TX1310/RX1490, 10km, LC) Quick Specification Table 1 shows the Quick Specs. Model SFP-GE-LX-SM1310-BIDI Part Number 02315285 Description Optical Transceiver, eSFP, GE, BIDI Single-mode Module (TX1310/RX1490, 10km, LC) Level-1 category GE eSFP Optical Modules Form factor eSFP Application standard 1000BASE-BX10 Connector type LC Optical fiber type SMF Working case temperature [° C(° F)] 0° C to 70° C (32° F to 158° F) Transmission rate [bit/s] 1 Gbit/s Target transmission distance [km] Single-mode fiber: 10 km Center wavelength [nm] 1490 nm (RX) 1310 nm (TX) Maximum Tx optical power [dBm] -3.0 Minimum Tx optical power [dBm] -9.0 Minimum extinction ratio [dB] 6 Rx sensitivity [dBm] -19.5 Overload power [dBm] -3.0 Note Supports the single-fiber bidirectional function. Single-fiber bidirectional (BIDI) optical modules must be used in pairs. For example, SFP-GE-LX-SM1310-BIDI must be used with SFP-GE-LX-SM1490-BIDI.
- 2. SFP-GE-LX-SM1310-BIDI (02315285) Datasheet Buy Huawei, Cisco, Zte, Hpe, Dell, Fortinet Network Equipment Online In China At Low Price! www.hi-network.com Figure 1 shows the appearance. Get More Information Do you have any question about the SFP-GE-LX-SM1310-BIDI (02315285)? Contact us now via info@hi-network.com. Specification SFP-GE-LX-SM1310-BIDI Specification Basic Information Model SFP-GE-LX-SM1310-BIDI Part Number 02315285 Description Optical Transceiver, eSFP, GE, BIDI Single-mode Module (TX1310/RX1490, 10km, LC) Level-1 category GE eSFP Optical Modules Technical Specifications Connector type LC Optical fiber type SMF Form factor eSFP Transmission rate [bit/s] 1G Target transmission distance [km] Single-mode (G.652) optical fiber (diameter: 9 μm): 10 km Application standard/Type 1000BASE-BX10 Working case temperature [° C(° F)] 0° C to 70° C (32° F to 158° F) Type of the end face of the fiber ceramic ferrule PC or UPC Center wavelength [nm] 1490(RX) 1310(TX) Overload power (AVG) [dBm] -3.0 Maximum Tx optical power (AVG) [dBm] -3.0
- 3. SFP-GE-LX-SM1310-BIDI (02315285) Datasheet Buy Huawei, Cisco, Zte, Hpe, Dell, Fortinet Network Equipment Online In China At Low Price! www.hi-network.com Minimum Tx optical power (AVG) [dBm] -9.0 Minimum extinction ratio [dB] 6 Rx sensitivity (OMA) [dBm] -19.5 Note Single-fiber bidirectional (BIDI) optical modules must be used in pairs. For example, SFP-GE-LX-SM1310-BIDI must be used with SFP-GE-LX-SM1490-BIDI. Want to Buy Learn More about Hi-Network Search our Resource Library Follow us on LinkedIn Contact for Sales or Support Contact HI-NETWORK.COM For Global Fast Shipping HongKong Office Tel: +00852-66181601 HangZhou Office Tel: +0086-571-86729517 Email: info@hi-network.com Skype: echo.hinetwork WhatsApp Business: +8618057156223