Dasar-dasar keamanan informasi. Dalam slide ini diterangkan tentang apa dan bagaimana keaman informasi secara singkat, juga segala aspek yang terkait dengannya
Dasar-dasar keamanan informasi. Dalam slide ini diterangkan tentang apa dan bagaimana keaman informasi secara singkat, juga segala aspek yang terkait dengannya
Музей бойової та трудової слави КЗО “ СЗШ № 69”
зайнявший І місце в обласному огляді-конкурсі музеїв-кімнат бойової, трудової слави присвячений 25-річчю створення Організації ветеранів України
Музей бойової та трудової слави КЗО “ СЗШ № 69”
зайнявший І місце в обласному огляді-конкурсі музеїв-кімнат бойової, трудової слави присвячений 25-річчю створення Організації ветеранів України
1. Прошивка ML 1910-1915.
Принтер должен быть исправен.
Выключите принтер и заново включите его с нажатой кнопкой.
Принтер замигает красным индикатором и войдет в режим загрузки.
После этого кнопку надо отпустить.
Установка драйверов на компьютере необязательна. Вы можете
отказаться от установки драйверов. Это не помешает процессу
прошивки. Необходимо отключить в портах USB и LPT дополнительные
устройства (flash-memory, другие принтеры). После входа в режим
загрузки необходимо запустить процесс загрузки на компьютере.
Это можно сделать либо запустив файл dwnll910.bat, либо
перетянув файл прошивки FIX_ML1910_V1.01.00.77.fIs на значок
файла загрузчика usbprns2.exe. На экране появится окно сеанса
MS-Dos и принтер начнет прошиваться. Прошивка идет около одной
минуты. Дождитесь окончания прошивки! Прерывание приведет к
неисправности аппарата. После этого необходимо удалить или
заклеить чип на картридже. Счетчики обнуляются при каждом
включении принтера.
Insertion ML 1910-1915.
The printer should be serviceable.
Switch off the printer and anew include it with the pressed
button. The printer will start blinking the red indicator and
will enter into a loading mode. After that the button should be
released.
Installation of drivers on the computer is unessential. You can
refuse installation of drivers. It will not prevent insertion
process. It is necessary to disconnect in ports USB and LPT
additional devices (flash-memory, other printers). After an
input in a loading mode it is necessary to start loading process
on the computer. It can be made or having started a file
dwnll910.bat, or having drawn a file of insertion
FIX_ML1910_V1.01.00.77.fIs on a badge of a file of the loader
usbprns2.exe. On the screen there will be a window of session
MS-Dos, and the printer will start to be stitched. The insertion
goes about one minute. Wait the insertion terminations!
Interruption will lead to malfunction of the device. After that
it is necessary to remove or stick the chip on a cartridge.
Counters are nulled at each inclusion of the printer.