This document appears to be a technical drawing for a device called a "GULF TECHNICAL FACTORYGTF B DC E" as the title is listed. It includes various views of the device, including an isometric view, front view, and right side view. It also includes a list of letters and numbers that are likely referring to different components or dimensions of the device.
Este documento presenta los conceptos básicos de la expresión gráfica, incluyendo materiales e instrumentos como el papel y lápices, el dibujo en dos dimensiones, vistas y despieces para mostrar diferentes ángulos de un objeto, representaciones en tres dimensiones usando perspectiva, y el dibujo técnico mediante planos.
El documento describe diferentes tipos de perspectivas utilizadas en dibujo técnico, incluyendo la perspectiva isométrica. Explica que la perspectiva isométrica representa un objeto tridimensional manteniendo ángulos de 120° entre los ejes y una escala constante. También cubre otros temas como la axonometría, proyecciones ortogonales, y ejemplos prácticos de cómo dibujar en perspectiva isométrica en AutoCAD.
El documento describe los dibujos isométricos, incluyendo su definición, características, ejes y líneas utilizadas. Un dibujo isométrico representa un objeto tridimensional mostrando tres de sus caras de manera deformada pero en la misma proporción, con sus ejes principales en ángulos de 30°, 90° y 150° respecto a la horizontal. Los dibujos isométricos son rápidos y efectivos para dar una idea de un diseño sin necesidad de escalas. Se usan en diseño industrial, arquitect
This document appears to be a technical drawing or blueprint containing labels and numbers but no clear narrative. It includes abbreviations and codes that reference a Gulf Technical Factory, Schlumberger, dates, views of a design, and a signature but provides minimal contextual information to understand its purpose or content.
This document appears to be a technical drawing for a device called a "GULF TECHNICAL FACTORYGTF B DC E" as the title is listed. It includes various views of the device, including an isometric view, front view, and right side view. It also includes a list of letters and numbers that are likely referring to different components or dimensions of the device.
Este documento presenta los conceptos básicos de la expresión gráfica, incluyendo materiales e instrumentos como el papel y lápices, el dibujo en dos dimensiones, vistas y despieces para mostrar diferentes ángulos de un objeto, representaciones en tres dimensiones usando perspectiva, y el dibujo técnico mediante planos.
El documento describe diferentes tipos de perspectivas utilizadas en dibujo técnico, incluyendo la perspectiva isométrica. Explica que la perspectiva isométrica representa un objeto tridimensional manteniendo ángulos de 120° entre los ejes y una escala constante. También cubre otros temas como la axonometría, proyecciones ortogonales, y ejemplos prácticos de cómo dibujar en perspectiva isométrica en AutoCAD.
El documento describe los dibujos isométricos, incluyendo su definición, características, ejes y líneas utilizadas. Un dibujo isométrico representa un objeto tridimensional mostrando tres de sus caras de manera deformada pero en la misma proporción, con sus ejes principales en ángulos de 30°, 90° y 150° respecto a la horizontal. Los dibujos isométricos son rápidos y efectivos para dar una idea de un diseño sin necesidad de escalas. Se usan en diseño industrial, arquitect
This document appears to be a technical drawing or blueprint containing labels and numbers but no clear narrative. It includes abbreviations and codes that reference a Gulf Technical Factory, Schlumberger, dates, views of a design, and a signature but provides minimal contextual information to understand its purpose or content.
The document appears to be a technical report from Gulf Technical Factory with reference number GTF-03-491 dated March 18, 2015. It contains measurements and specifications for drift diameter of 3.795 inches from Halliburton and was reviewed by Syed I B and prepared by Sadgir P B.
This document appears to be a technical drawing or blueprint containing diagrams and measurements for an industrial part called an "EQUALIZER PRONG". The diagrams include an isometric view, right side view, and top view of the part. The document also lists various codes, identification numbers, dates and initials potentially related to the design, manufacturing or approval of the part.
The document appears to be a technical drawing for an equalizer prong measuring 2.6 inches. It includes multiple views including isometric, top, and right side views. The drawing was created by G. Llaban for Gulf Technical Factory and includes part numbers and dates.
This document appears to be a technical factory report containing codes and part numbers. It lists various letters and numbers that seem to denote different sections or components, as well as dates, names of people involved, and numerical codes that may represent specifications or quantities. The purpose and subject matter of the report cannot be clearly understood from the limited information provided.
This document appears to be a technical report from Gulf Technical Factory listing components A through I, with 6 equalizing prongs and details on the document number, date, and author. It provides information on multiple parts but lacks context on the purpose or subject of the report.
This document from Gulf Technical Factory provides technical details for a sliding holder. It includes a drawing labeled isometric view showing the design of the sliding holder. The document also lists various parts and specifications.
This document provides a left isometric view of a hand tool support structure. It was created by Syed I.B. and G.S. Garcia for Gulf Technical Factory and references design GTF-02-446 from May 2, 2015. The document contains labels for various parts of the structure.
This document specifies the material and thickness for a shell, noting it is made of SA-516-70 steel. The design pressure at the top of the shell is 6620 kPa (960 psi) and the external pressure is 101.33 kPa (14.7 psi). SA-516-70 refers to ASTM A516 Grade 70 and ASME SA516 Grade 70 carbon steel plate suitable for boilers and pressure vessels.
This document appears to be a technical drawing, as it contains labels like "ISOMETRIC VIEW" and references to a "Gulf Technical Factory". The drawing includes various labels with letters and numbers, and at the bottom lists information like a project code, date, and numbers that may correspond to different parts of the drawing.
This document appears to be an inventory or work order from Gulf Technical Factory listing various items including a metal ashtray, pipes of different sizes, and names of people possibly involved in the project. The document includes codes, dates, and specifications for the listed items.
This document appears to be a technical report from Gulf Technical Factory (GTF) regarding a hanger bearing produced by Halliburton. The report details a bending radius test of the hanger bearing and was prepared by Syed I B and reviewed by Eliyas and Sadgir P B on March 29, 2015.
This document appears to be a technical report from Gulf Technical Factory listing various parts and components. It includes labels for an equalizing prong, Halliburton, and various other letters and numbers that seem to be references to different sections or pieces. The document also lists the date of 08/02/2015 and includes initials of G. Llaban at the bottom.
This document appears to be a technical report from Gulf Technical Factory with reference codes and part numbers. It was authored by Syed I.B. and G. Llaban on August 2nd, 2015 and relates to an equalizing prong that is classified as small.
The document appears to be a bill of materials or work order for a factory project involving a door. It lists various steel components including square tubes, flat bars, and sheets that will be used, along with the door dimensions of 1840mm x 690mm. A company name, reference number, date, and person are also included but no other context is provided.
The document appears to be a parts list or schematic for a cupboard or storage unit. It includes labels for different sections of the cupboard from A to I and lists various building materials and components such as 3mm sheet, bent C-channels, angle bars, plates, bearings, mesh, rods and handles. The document also includes information for Gulf Technical Factory including project codes and dates.
This document appears to be a technical report from Gulf Technical Factory (GTF) discussing topics A through J. The report was authored by Syed I B and Eliyas from GTF and numbered GTF-03-499 with a date of March 18, 2015. It contains various sections and signatures.
The document appears to be a technical report from Gulf Technical Factory (GTF) regarding a conveyor shield. It was authored by Syed I B and Eliyas on March 29, 2015. The report number is GTF-03-509 and contains information on bending radius.
The document appears to be a technical report from Gulf Technical Factory with reference number GTF-03-491 dated March 18, 2015. It contains measurements and specifications for drift diameter of 3.795 inches from Halliburton and was reviewed by Syed I B and prepared by Sadgir P B.
This document appears to be a technical drawing or blueprint containing diagrams and measurements for an industrial part called an "EQUALIZER PRONG". The diagrams include an isometric view, right side view, and top view of the part. The document also lists various codes, identification numbers, dates and initials potentially related to the design, manufacturing or approval of the part.
The document appears to be a technical drawing for an equalizer prong measuring 2.6 inches. It includes multiple views including isometric, top, and right side views. The drawing was created by G. Llaban for Gulf Technical Factory and includes part numbers and dates.
This document appears to be a technical factory report containing codes and part numbers. It lists various letters and numbers that seem to denote different sections or components, as well as dates, names of people involved, and numerical codes that may represent specifications or quantities. The purpose and subject matter of the report cannot be clearly understood from the limited information provided.
This document appears to be a technical report from Gulf Technical Factory listing components A through I, with 6 equalizing prongs and details on the document number, date, and author. It provides information on multiple parts but lacks context on the purpose or subject of the report.
This document from Gulf Technical Factory provides technical details for a sliding holder. It includes a drawing labeled isometric view showing the design of the sliding holder. The document also lists various parts and specifications.
This document provides a left isometric view of a hand tool support structure. It was created by Syed I.B. and G.S. Garcia for Gulf Technical Factory and references design GTF-02-446 from May 2, 2015. The document contains labels for various parts of the structure.
This document specifies the material and thickness for a shell, noting it is made of SA-516-70 steel. The design pressure at the top of the shell is 6620 kPa (960 psi) and the external pressure is 101.33 kPa (14.7 psi). SA-516-70 refers to ASTM A516 Grade 70 and ASME SA516 Grade 70 carbon steel plate suitable for boilers and pressure vessels.
This document appears to be a technical drawing, as it contains labels like "ISOMETRIC VIEW" and references to a "Gulf Technical Factory". The drawing includes various labels with letters and numbers, and at the bottom lists information like a project code, date, and numbers that may correspond to different parts of the drawing.
This document appears to be an inventory or work order from Gulf Technical Factory listing various items including a metal ashtray, pipes of different sizes, and names of people possibly involved in the project. The document includes codes, dates, and specifications for the listed items.
This document appears to be a technical report from Gulf Technical Factory (GTF) regarding a hanger bearing produced by Halliburton. The report details a bending radius test of the hanger bearing and was prepared by Syed I B and reviewed by Eliyas and Sadgir P B on March 29, 2015.
This document appears to be a technical report from Gulf Technical Factory listing various parts and components. It includes labels for an equalizing prong, Halliburton, and various other letters and numbers that seem to be references to different sections or pieces. The document also lists the date of 08/02/2015 and includes initials of G. Llaban at the bottom.
This document appears to be a technical report from Gulf Technical Factory with reference codes and part numbers. It was authored by Syed I.B. and G. Llaban on August 2nd, 2015 and relates to an equalizing prong that is classified as small.
The document appears to be a bill of materials or work order for a factory project involving a door. It lists various steel components including square tubes, flat bars, and sheets that will be used, along with the door dimensions of 1840mm x 690mm. A company name, reference number, date, and person are also included but no other context is provided.
The document appears to be a parts list or schematic for a cupboard or storage unit. It includes labels for different sections of the cupboard from A to I and lists various building materials and components such as 3mm sheet, bent C-channels, angle bars, plates, bearings, mesh, rods and handles. The document also includes information for Gulf Technical Factory including project codes and dates.
This document appears to be a technical report from Gulf Technical Factory (GTF) discussing topics A through J. The report was authored by Syed I B and Eliyas from GTF and numbered GTF-03-499 with a date of March 18, 2015. It contains various sections and signatures.
The document appears to be a technical report from Gulf Technical Factory (GTF) regarding a conveyor shield. It was authored by Syed I B and Eliyas on March 29, 2015. The report number is GTF-03-509 and contains information on bending radius.
1. GULF TECHNICAL FACTORYGTF B DC E
F G H I J
A
HANGER BEARNING
HALLIBURTON
SYED.I.B
GSGARCIA
F
GTF-02-448
07/02/2015
A B C D E F G H I
1
2
3
4
5
6
ISOMETRIC RIGHT SIDE VIEW
TOP VIEW
FRONT VIEW RIGHT SIDE VIEW
G. LLABAN