Final1-Model
•
0 likes•8 views
This document contains an architectural drawing for a furniture layout and floor plan. It includes dimensions and labels for various rooms in a building, such as a living room, dining room, kitchen, guest rooms, and washrooms. The total area is 1380 square meters with 381.5 square meters for the ground floor building area. The drawing was designed by Architect Abdalla Elnigoumi.
Report
Share
Report
Share
Download to read offline
Recommended
Reforma -r1_(1)[1]![Reforma -r1_(1)[1]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
This document contains measurements in meters for various rooms of a house plan including the kitchen/dining area, two bedrooms, a living room, balcony, and two bathrooms. It also lists the room names and includes a scale, date, page number, project name and credits for the planta baixa or ground floor plan.
Schedule
The document provides a weekly work schedule and hours for employees at Avenues store 149 for the week ending December 13, 2014. It shows each employee's position, hours worked each day including start and end times, total weekly hours worked versus budgeted hours, and daily and weekly sales data compared to the same period last year. Overall, the store's actual hours of 357 were slightly under the budgeted hours of 363 for the week.
Production schedule
The document outlines the production schedule for Irene taking place from February 3-7, 2020 in a conference room. It details the call time, equipment set up and breakdown times, and a shooting schedule with start and end times for 20 shots between 15:40-16:30 on one day and 15:35-16:30 on another.
A2.0
The document contains measurements in feet and inches for the floor plans of a three-level home, including the first floor, second floor, and rooftop deck. Dimensions are provided for various rooms and structures including the master bedroom, two additional bedrooms, a bathroom, kitchen, living room, dining room, garage, office, and decks.
CHUTE
This technical drawing shows an exit chute assembly with labeled dimensions. The assembly includes two symmetrical halves that connect at the center and funnel items from the top opening toward the bottom exit point. Key dimensions note the inner radius, thickness, and overall sizes of the curved chute components.
Horario flavio
Flavio Ochoa Calderón's class schedule is documented across four days of the week. The schedule includes the hours from 1-6 each day with corresponding class codes. A general schedule is also provided outlining six periods from 6:15 AM to 12:25 PM. Additional schedules are shown for recreation periods and formation periods, each also spanning six periods throughout the morning and into the afternoon.
UCB Logo
1) The document describes how to draw a car and clock in Logo. It includes procedures to draw the base car, erase the car, and animate it moving.
2) It also includes a procedure to draw the face of a clock and make the minute hand move every 60 seconds.
3) Finally, it shows how to draw a target and throw darts at it by changing the dart's color as it moves towards the center.
Production schedule
The production schedule outlines 11 filming dates from June 2nd to June 30th for a television production. Each date lists the scene numbers being filmed, required equipment, crew of Annie, Jade and Piers, and the filming location of the TV studio. The schedule also notes scenes 3&4 and 5&6 being filmed on Mondays after school and scene 5&6 on Thursdays after school.
Recommended
Reforma -r1_(1)[1]
This document contains measurements in meters for various rooms of a house plan including the kitchen/dining area, two bedrooms, a living room, balcony, and two bathrooms. It also lists the room names and includes a scale, date, page number, project name and credits for the planta baixa or ground floor plan.
Schedule
The document provides a weekly work schedule and hours for employees at Avenues store 149 for the week ending December 13, 2014. It shows each employee's position, hours worked each day including start and end times, total weekly hours worked versus budgeted hours, and daily and weekly sales data compared to the same period last year. Overall, the store's actual hours of 357 were slightly under the budgeted hours of 363 for the week.
Production schedule
The document outlines the production schedule for Irene taking place from February 3-7, 2020 in a conference room. It details the call time, equipment set up and breakdown times, and a shooting schedule with start and end times for 20 shots between 15:40-16:30 on one day and 15:35-16:30 on another.
A2.0
The document contains measurements in feet and inches for the floor plans of a three-level home, including the first floor, second floor, and rooftop deck. Dimensions are provided for various rooms and structures including the master bedroom, two additional bedrooms, a bathroom, kitchen, living room, dining room, garage, office, and decks.
CHUTE
This technical drawing shows an exit chute assembly with labeled dimensions. The assembly includes two symmetrical halves that connect at the center and funnel items from the top opening toward the bottom exit point. Key dimensions note the inner radius, thickness, and overall sizes of the curved chute components.
Horario flavio
Flavio Ochoa Calderón's class schedule is documented across four days of the week. The schedule includes the hours from 1-6 each day with corresponding class codes. A general schedule is also provided outlining six periods from 6:15 AM to 12:25 PM. Additional schedules are shown for recreation periods and formation periods, each also spanning six periods throughout the morning and into the afternoon.
UCB Logo
1) The document describes how to draw a car and clock in Logo. It includes procedures to draw the base car, erase the car, and animate it moving.
2) It also includes a procedure to draw the face of a clock and make the minute hand move every 60 seconds.
3) Finally, it shows how to draw a target and throw darts at it by changing the dart's color as it moves towards the center.
Production schedule
The production schedule outlines 11 filming dates from June 2nd to June 30th for a television production. Each date lists the scene numbers being filmed, required equipment, crew of Annie, Jade and Piers, and the filming location of the TV studio. The schedule also notes scenes 3&4 and 5&6 being filmed on Mondays after school and scene 5&6 on Thursdays after school.
Catalog of the Tonalite's Arabesque Satinl Collection
Catalog of the Tonalite's Arabesque Satinl collection
Catalogo della collezione Arabesque Satin di Tonalite
AG Associates Heatpulse 410 RTA RTP RTO RTN Rapid Thermal Annealing
AG Associates Heatpulse 410 RTA RTP RTO RTN Rapid Thermal Annealing: In Morgan Hill,CA USA. Subject to prior sale. Email us for more info pls.
POTATO WASHER RIGHT SIDE FULL ASSEM
This document contains technical drawings and specifications for a potato washer assembly right side. It includes labeled diagrams showing the assembly from two angles with dimensions in inches. The document also lists part numbers, materials, and additional specifications for the potato washer assembly components.
2 BHK Apartments in Hadapsar - Valay
Valay is a well planned planned project or 2 BHK Apartments in Hadapsar. Highly contemporary design, proper space managment, right lifestyle amenities and good location, everything combines to create a perfectly planned, picturesque project.
Deep thought is given to the wants of the entire family and the result is a beautful abode, stylish, soothing and superb.
Crane
This engineering drawing shows details for a crane, including two detail views labeled A and B at a scale of 0.13:1. It contains a bill of materials listing components like a tension rope, pulley, eye bolt, and bolts. The drawing was created by Taiwo, drawn on 4/7/2014, and is titled "priority crane".
P182 ep-zce-cra9-ps-44-61-carrera 9 - plano 44 - 61
This document appears to contain a list of numerical values ranging from 0.40 to 20 with most values between 1 and 10. The numbers are organized with some regular spacing and formatting but there is no other context provided to explain the purpose or meaning of the data.
MILL TOP
This document appears to be a lab report containing data and measurements from an experiment. It includes labels for parts A and B, identifies the student Connor Keith and lab number 70, and provides measurements ranging from 2.11 to 33.73 alongside dates and page numbers, likely recording results of a science experiment conducted on October 15th.
FirstCalvin Musuta's Work
This document contains design plans for a proposed 4 bedroom house in Boulder, Swaziland. The first floor plan includes a master bedroom, two smaller bedrooms, a bathroom, kitchen, outdoor nest area, panic room, and parking. Dimensions and areas are provided for each room. An eastern elevation view is also included. The design proposes a swimming pool and includes dimensions for exterior features like the driveway, yard, and balconies.
Cert. Quality Training Transcript
Bryan Allen of Granville, Iowa completed several continuing education classes between 1999 and 2002, earning over 80 total hours. The classes included topics like Lean manufacturing, quality systems, non-destructive examination, geometric dimensioning and tolerancing, and gear inspection. All classes received a passing grade with no CEU units awarded.
2-bedroom iBuild Kit Homes Westwood
Let the Westwood become your sanctuary. Beautifully balanced, with shady verandahs on three sides, the Westwood truly lives up to its name.
Bedrooms: 2
Bathrooms: 1
Living area: 76m2
Verandah area: 76m2
Total area: 151m2
NOVA SAW TEETH 2016 SMPRV2.1
The document contains a parts list and information about Nova saw teeth replacements for feller bunchers. It lists 4 different tooth part numbers with specifications like tooth type, kerf, shank diameter, shank length, and bolt part number. It then provides information on the benefits of Nova saw teeth, which are made of hardened alloy steel, can be resharpened, and offer quality at affordable prices as an alternative to OEM products. Carbide tipped teeth are also available for extended wear life.
Unit 410
This floor plan shows a 1,706 square foot condominium unit with 3 bedrooms and 2.5 bathrooms. The open floor plan features a great room that flows into a sitting area and kitchen. The master bedroom includes a large walk-in closet and ensuite bathroom. A terrace is accessible from the great room.
Mario revit model
The document contains repetitive information about building levels including a first level from 0' to 0", a second level from 8' to 10", and a roof level at 18' 4". Floor plans and elevation views are provided with labels for cardinal directions and a scale of 1/4" = 1'-0".
Futura TWISTER FT810 RC at work
Photographs of the wear life of the futura mining tooth FT810 RC.
FUTURA TWISTER tooth size 810 Rock Chisel
Horarios ii ciclo 2018
This document contains proposed class schedules for the second cycle of 2018 for the fourth and eighth levels of school. The fourth level schedule lists classes from 7:00-18:00 on Mondays, Tuesdays, Wednesdays, Thursdays and Fridays. The eighth level schedule also runs from 7:00-18:00 and includes class codes and times. Notes at the bottom indicate times and levels for various classes.
Brochure - The Kitchen Studio
This document provides information about kitchen products and suppliers. It lists wire baskets, cabinets, shutters, appliances, sinks, and fittings available from various brands. It also includes contact information for The Kitchen Studio and a list of client projects in Kanpur, Satna, Lucknow, Allahabad, Varanasi, and Gorakhpur.
re 1
This certificate certifies that Mlungisi Christopher Biyela successfully completed the First Level Regulatory Examination: Representatives examination on February 5, 2016 at Durban Westville Pharos House. The certificate number is 188218 and contains a verification code.
Jadual 4 sgt
This document is a class schedule for Semester 1 of the 2013/2014 session at the Faculty of Geoinformation and Real Estate. It shows the course code, course name, lecturer, room, and book for each class on Monday through Friday from 8:00am to 7:50pm. A key at the bottom identifies the lecturers' initials and full names.
Different Types of Kitchens
You would be able to choose the most efficient kitchen layout. Here are some of the basic types of kitchen layouts that would be suitable for you.
Unit 310
This floor plan shows a 1,706 square foot condominium unit with 3 bedrooms and 2.5 bathrooms. The open floor plan features a great room that flows into a sitting area and kitchen. The master bedroom includes a large walk-in closet and ensuite bathroom. A terrace is accessible from the great room.
More Related Content
What's hot
Catalog of the Tonalite's Arabesque Satinl Collection
Catalog of the Tonalite's Arabesque Satinl collection
Catalogo della collezione Arabesque Satin di Tonalite
AG Associates Heatpulse 410 RTA RTP RTO RTN Rapid Thermal Annealing
AG Associates Heatpulse 410 RTA RTP RTO RTN Rapid Thermal Annealing: In Morgan Hill,CA USA. Subject to prior sale. Email us for more info pls.
POTATO WASHER RIGHT SIDE FULL ASSEM
This document contains technical drawings and specifications for a potato washer assembly right side. It includes labeled diagrams showing the assembly from two angles with dimensions in inches. The document also lists part numbers, materials, and additional specifications for the potato washer assembly components.
2 BHK Apartments in Hadapsar - Valay
Valay is a well planned planned project or 2 BHK Apartments in Hadapsar. Highly contemporary design, proper space managment, right lifestyle amenities and good location, everything combines to create a perfectly planned, picturesque project.
Deep thought is given to the wants of the entire family and the result is a beautful abode, stylish, soothing and superb.
Crane
This engineering drawing shows details for a crane, including two detail views labeled A and B at a scale of 0.13:1. It contains a bill of materials listing components like a tension rope, pulley, eye bolt, and bolts. The drawing was created by Taiwo, drawn on 4/7/2014, and is titled "priority crane".
P182 ep-zce-cra9-ps-44-61-carrera 9 - plano 44 - 61
This document appears to contain a list of numerical values ranging from 0.40 to 20 with most values between 1 and 10. The numbers are organized with some regular spacing and formatting but there is no other context provided to explain the purpose or meaning of the data.
MILL TOP
This document appears to be a lab report containing data and measurements from an experiment. It includes labels for parts A and B, identifies the student Connor Keith and lab number 70, and provides measurements ranging from 2.11 to 33.73 alongside dates and page numbers, likely recording results of a science experiment conducted on October 15th.
FirstCalvin Musuta's Work
This document contains design plans for a proposed 4 bedroom house in Boulder, Swaziland. The first floor plan includes a master bedroom, two smaller bedrooms, a bathroom, kitchen, outdoor nest area, panic room, and parking. Dimensions and areas are provided for each room. An eastern elevation view is also included. The design proposes a swimming pool and includes dimensions for exterior features like the driveway, yard, and balconies.
Cert. Quality Training Transcript
Bryan Allen of Granville, Iowa completed several continuing education classes between 1999 and 2002, earning over 80 total hours. The classes included topics like Lean manufacturing, quality systems, non-destructive examination, geometric dimensioning and tolerancing, and gear inspection. All classes received a passing grade with no CEU units awarded.
2-bedroom iBuild Kit Homes Westwood
Let the Westwood become your sanctuary. Beautifully balanced, with shady verandahs on three sides, the Westwood truly lives up to its name.
Bedrooms: 2
Bathrooms: 1
Living area: 76m2
Verandah area: 76m2
Total area: 151m2
NOVA SAW TEETH 2016 SMPRV2.1
The document contains a parts list and information about Nova saw teeth replacements for feller bunchers. It lists 4 different tooth part numbers with specifications like tooth type, kerf, shank diameter, shank length, and bolt part number. It then provides information on the benefits of Nova saw teeth, which are made of hardened alloy steel, can be resharpened, and offer quality at affordable prices as an alternative to OEM products. Carbide tipped teeth are also available for extended wear life.
Unit 410
This floor plan shows a 1,706 square foot condominium unit with 3 bedrooms and 2.5 bathrooms. The open floor plan features a great room that flows into a sitting area and kitchen. The master bedroom includes a large walk-in closet and ensuite bathroom. A terrace is accessible from the great room.
Mario revit model
The document contains repetitive information about building levels including a first level from 0' to 0", a second level from 8' to 10", and a roof level at 18' 4". Floor plans and elevation views are provided with labels for cardinal directions and a scale of 1/4" = 1'-0".
Futura TWISTER FT810 RC at work
Photographs of the wear life of the futura mining tooth FT810 RC.
FUTURA TWISTER tooth size 810 Rock Chisel
Horarios ii ciclo 2018
This document contains proposed class schedules for the second cycle of 2018 for the fourth and eighth levels of school. The fourth level schedule lists classes from 7:00-18:00 on Mondays, Tuesdays, Wednesdays, Thursdays and Fridays. The eighth level schedule also runs from 7:00-18:00 and includes class codes and times. Notes at the bottom indicate times and levels for various classes.
Brochure - The Kitchen Studio
This document provides information about kitchen products and suppliers. It lists wire baskets, cabinets, shutters, appliances, sinks, and fittings available from various brands. It also includes contact information for The Kitchen Studio and a list of client projects in Kanpur, Satna, Lucknow, Allahabad, Varanasi, and Gorakhpur.
re 1
This certificate certifies that Mlungisi Christopher Biyela successfully completed the First Level Regulatory Examination: Representatives examination on February 5, 2016 at Durban Westville Pharos House. The certificate number is 188218 and contains a verification code.
Jadual 4 sgt
This document is a class schedule for Semester 1 of the 2013/2014 session at the Faculty of Geoinformation and Real Estate. It shows the course code, course name, lecturer, room, and book for each class on Monday through Friday from 8:00am to 7:50pm. A key at the bottom identifies the lecturers' initials and full names.
Different Types of Kitchens
You would be able to choose the most efficient kitchen layout. Here are some of the basic types of kitchen layouts that would be suitable for you.
Unit 310
This floor plan shows a 1,706 square foot condominium unit with 3 bedrooms and 2.5 bathrooms. The open floor plan features a great room that flows into a sitting area and kitchen. The master bedroom includes a large walk-in closet and ensuite bathroom. A terrace is accessible from the great room.
What's hot (20)
Catalog of the Tonalite's Arabesque Satinl Collection
Catalog of the Tonalite's Arabesque Satinl Collection
AG Associates Heatpulse 410 RTA RTP RTO RTN Rapid Thermal Annealing
AG Associates Heatpulse 410 RTA RTP RTO RTN Rapid Thermal Annealing
P182 ep-zce-cra9-ps-44-61-carrera 9 - plano 44 - 61
P182 ep-zce-cra9-ps-44-61-carrera 9 - plano 44 - 61
Final1-Model
- 1. ACNAN EST. For Decoration & Contracting Location : Mr: Information & Details: Sketch No: Scale: 1:100 Date: 07/09/2015 Architectural Drawings FURNITURE Signature 1.80 4.00 32.00 1.80 8.00 6.00 DN UP 5.00 6.00 4.70 4.00 6.00 5.00 3.70 4.00 4.00 6.50 5.60 5.90 5.60 4.40 3.10 1.70 2.70 5.00 DINING LIVING OPEN SESSION FOYER GUEST KITCHEN GUEST WC WC WC POOL 3.00 LIFT DN 3.00 2.10 2.50 4.00 1.50 1.30 1.50 1.80 1.50 1.40 2.00 1.80 1.50 1.40 4.20 2.00 1.70 2.60 1.62 2.00 3.90 GENERAL SITE 4.00 R3.60 R2.00 4.00 OPEN SESSION PLAYYARD BREAKPART KITCHENWC 2.70 2.00 2.90 2.00 5.80 4.60 2.70 2.50 0.95 0.90 1.50 2.70 TOTAL AREA 1380m BUILDING AREA ON THE GROUND 381.5m 1.70 DESIGNED BY: ARCH. ABDALLA ELNIGOUMI