If you have a proprietor of property, ground and lots of expensive thing and you want to do examination then it is very good for you as inspection is always very precious for us. Asia textile Inspections Company careful one of the best companies.
http://asiatextileinspections.com/
This paper proposes a novel Adaptive Rood Pattern Search (ARPS) algorithm for block matching in video shot boundary detection. ARPS uses motion activity, which is measured by the magnitude of motion vectors between frames, to help predict the motion vector for each block. The algorithm works by first assuming blocks near a current block will move in a similar direction, then searching in a pattern around the predicted motion vector. Experimental results on test videos show ARPS can accurately detect shot boundaries with fewer false detections than other block matching algorithms.
This document discusses analyzing faults in induction motors using finite element analysis with Magnet software. It first describes modeling a healthy 1HP three-phase induction motor in Magnet, including dimensions of the stator, rotor, shaft, bearings, and end rings. Broken rotor bars are then introduced as a fault to study the variation in starting torque. Magnetic field analysis is performed on the healthy and faulty motor models.
This document provides an update on the TSA Research Project conducted by NZTA. It introduces Gregg Morrow as the presenter and notes the project is underway, with objectives being reconfirmed and a literature review completed. The purpose is to improve the TSA algorithm to better forecast road maintenance needs and timing of works while maintaining roads in good condition at the lowest whole-of-life cost in the short to medium term. Key outcomes will include reviewing the current usefulness of TSA, developing improved algorithms reflecting updated parameters, and incorporating findings from long-term pavement performance studies.
ROMDAS Elite Survey Vehicle with Laser Crack Measurement SystemSimon Gough
The document discusses a ROMDAS Elite survey vehicle with LCMS (Laser Crack Measurement System) for collecting pavement data. The LCMS uses lasers to scan the pavement surface and capture profiles, roughness measurements, cracking, rutting and other defects. It outputs data like IRI, cracking measurements and images overlaid with defects. Lane tracking ensures consistent profiles despite vehicle wander. Automatic defect detection could supplement subjective RAMM condition surveys. Repeatable measurements are highlighted as important for roughness, rut depth and cracking analysis over time.
This document summarizes a grid-connected photovoltaic power system that uses a boost-half-bridge converter. The system aims to efficiently transfer power from a solar PV array to the electric grid. It consists of two main stages - a boost-half-bridge DC-DC converter that steps up the low-voltage solar output, and a full-bridge inverter that feeds a sinusoidal current into the grid via an LCL filter. The boost-half-bridge converter provides galvanic isolation and a high step-up ratio with minimal components. Maximum power point tracking is performed to optimize solar energy extraction while limiting transient effects on efficiency.
If you have a proprietor of property, ground and lots of expensive thing and you want to do examination then it is very good for you as inspection is always very precious for us. Asia textile Inspections Company careful one of the best companies.
http://asiatextileinspections.com/
This paper proposes a novel Adaptive Rood Pattern Search (ARPS) algorithm for block matching in video shot boundary detection. ARPS uses motion activity, which is measured by the magnitude of motion vectors between frames, to help predict the motion vector for each block. The algorithm works by first assuming blocks near a current block will move in a similar direction, then searching in a pattern around the predicted motion vector. Experimental results on test videos show ARPS can accurately detect shot boundaries with fewer false detections than other block matching algorithms.
This document discusses analyzing faults in induction motors using finite element analysis with Magnet software. It first describes modeling a healthy 1HP three-phase induction motor in Magnet, including dimensions of the stator, rotor, shaft, bearings, and end rings. Broken rotor bars are then introduced as a fault to study the variation in starting torque. Magnetic field analysis is performed on the healthy and faulty motor models.
This document provides an update on the TSA Research Project conducted by NZTA. It introduces Gregg Morrow as the presenter and notes the project is underway, with objectives being reconfirmed and a literature review completed. The purpose is to improve the TSA algorithm to better forecast road maintenance needs and timing of works while maintaining roads in good condition at the lowest whole-of-life cost in the short to medium term. Key outcomes will include reviewing the current usefulness of TSA, developing improved algorithms reflecting updated parameters, and incorporating findings from long-term pavement performance studies.
ROMDAS Elite Survey Vehicle with Laser Crack Measurement SystemSimon Gough
The document discusses a ROMDAS Elite survey vehicle with LCMS (Laser Crack Measurement System) for collecting pavement data. The LCMS uses lasers to scan the pavement surface and capture profiles, roughness measurements, cracking, rutting and other defects. It outputs data like IRI, cracking measurements and images overlaid with defects. Lane tracking ensures consistent profiles despite vehicle wander. Automatic defect detection could supplement subjective RAMM condition surveys. Repeatable measurements are highlighted as important for roughness, rut depth and cracking analysis over time.
This document summarizes a grid-connected photovoltaic power system that uses a boost-half-bridge converter. The system aims to efficiently transfer power from a solar PV array to the electric grid. It consists of two main stages - a boost-half-bridge DC-DC converter that steps up the low-voltage solar output, and a full-bridge inverter that feeds a sinusoidal current into the grid via an LCL filter. The boost-half-bridge converter provides galvanic isolation and a high step-up ratio with minimal components. Maximum power point tracking is performed to optimize solar energy extraction while limiting transient effects on efficiency.
3. ARBRE GENEALÒGIC
Noemi Antonio Carmen
Jose Misol
Barros Monsalvo Ferez
Osvaldo Daniela
Misol Monsalvo
Alejo Misol Rocio Misol
4. IES Martí Franqués
Diploma d’honor
S’otorga en virtud d’aquest document a:
Alejo Misol Monsalvo
pel rendiment exelent I per una contribució valuosa a
La informatica aplicada a
l’educació
Atorgat per: 22 / març / 2011
Alejo Miisol, Alumne