This document provides part numbers and renewal times for components related to the crankcase, oil pan, flywheel, counterweights, V-grooved pulley, and crankshaft for Agrotron K 90, K 100, K 110, and K 120 Profiline tractor models. It lists 22 part numbers and their corresponding descriptions for crankcase components with a renewal time of 24.5 hours. It also provides specifications for 5 crankshaft bearings and 2 thrust washers for the crankshaft.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
What Are The Immediate Steps To Take When The VW Temperature Light Starts Fla...Import Motorworks
Learn how to respond when the red temperature light flashes in your VW with this presentation. From checking coolant levels to seeking professional help, follow these steps promptly to prevent engine damage and ensure safety on the road.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Deutz fahr agrotron k120 profiline tractor parts catalogue manual
1. Workshop standard times
Temps de reparation
Reparatur-zeittafel
Agrotron K 90 Profiline -> 8159 1001
Agrotron K 100 Profiline -> 8160 1001
Agrotron K 110 Profiline -> 8161 1001
Agrotron K 120 Profiline -> 8162 1001
307.6055.3.6
2. Agrotron K 90 K 100 K 120 Profiline
Section: ENGINE SUBAS: 94 Ref. 1/7
CRANKCASE
BLOC MOTEUR
KURBELGEHÄUSE
Fig Part Nr Qty Description Dénomination Bezeichnung
Renewal time (d/h)
1 04289939 1 crankcase carter moteur kurbelgehaeuse
- T. = 24.5 -> (24.0 + 0.5 [Cod. 0902])
WITH ITEM ....
AVEC REP...
MIT POS....
AVEC POSTE....
(2-15,18-24)
2 04254240 10 hexagon bolt vis tete hexagonal sechskantschraube
3 04160764 10 bushing bague lagerbuchse
4 01110423 1 plug bouchon stopfen
DIN 908 -M14X1,5-ST-ZNPHRF
5 01118693 3 gasket (14x20) joint dichtung
DIN 7603 -A14X20-CU
6 01180890 1 plug bouchon stopfen
H 2812 -906-M30X1,5-ST-A4C-PRE80
7 01180906 1 plug bouchon stopfen
H 2812 -906-M22X1,5-ST-A4C-PRE80
8 01182031 2 screw plug vis de fermeture verschlussschraube
H 2812 -906-M14X1,5-ST-A3C-LOCTITE506
10 04251884 4 plug bouchon stopfen
11 04250086 1 ring anneau ring
12 01148032 6 plug bouchon stopfen
DIN 443 -A45-ZNPHR
13 01179634 4 plug bouchon stopfen
H 2860 -A36-ST-FE/ZNPHR
14 01100940 2 plug bouchon stopfen
DIN 7604 -AM14X1,5-ST-A4C
15 04202518 1 sleeve douille buchse
18 04226536 1 plug bouchon verschlussstopfen
19 04259301 2 differential gear shaft arbre d'équilibrage ausgleichswelle
20 04252834 4 sleeve douille buchse
21 04251810 2 stop arret verschluss
22 01181672 2 nut ecrou mutter
H 2091 -4017-M8X16-10.9-GESCHW-MK-1.0
307.6055.3.6 Sheet 1
3. Agrotron K 90 K 100 K 120 Profiline
Section: ENGINE SUBAS: 94 Ref. 1/7
CRANKCASE
BLOC MOTEUR
KURBELGEHÄUSE
Fig Part Nr Qty Description Dénomination Bezeichnung
Renewal time (d/h)
23 04255998 1 plug bouchon stopfen
24 04254026 1 tube tuyau schlauch
185 01016127 1 safety/lock.agent resine-frein sicherungsmittel
H 699 -DEUTZDW72-50ML
307.6055.3.6 Sheet 2 F
4. Agrotron K 110 Profiline
Section: ENGINE SUBAS: 84 Ref. 1/8
FLANGE
BRIDE
FLANSCH
Fig Part Nr Qty Description Dénomination Bezeichnung
Renewal time (d/h)
1 04258382 1 oil pump pompe a huile oelpumpe
- T. = 7.5 -> (1.5 + 6.0 [Cod. 1002])
WITH ITEM ....
AVEC REP...
MIT POS....
AVEC POSTE....
(2,3)
2 04253372 1 oil seal racleur simmerring
- T. = 4.0 -> (2.5 + 1.5 [Cod. 0401])
3 01133718 1 c.sunk head screw vis a tete fraisee senkschraube
DIN 7991 -M6X16-8.8-A4C
307.6055.3.6 Sheet 1 F
5. Agrotron K 110 Profiline
Section: ENGINE SUBAS: 93 Ref. 1/9
CRANKCASE
BLOC MOTEUR
KURBELGEHÄUSE
Fig Part Nr Qty Description Dénomination Bezeichnung
Renewal time (d/h)
1 04289953 1 crankcase carter moteur kurbelgehaeuse
- T. = 24.5 -> (24.0 + 0.5 [Cod. 0902])
WITH ITEM ....
AVEC REP...
MIT POS....
AVEC POSTE....
(2-8,10-17)
2 04254240 14 hexagon bolt vis tete hexagonal sechskantschraube
3 04160764 14 bushing bague lagerbuchse
4 01110423 1 plug bouchon stopfen
DIN 908 -M14X1,5-ST-ZNPHRF
5 01118693 3 gasket (14x20) joint dichtung
DIN 7603 -A14X20-CU
6 01180890 1 plug bouchon stopfen
H 2812 -906-M30X1,5-ST-A4C-PRE80
7 01180906 1 plug bouchon stopfen
H 2812 -906-M22X1,5-ST-A4C-PRE80
8 01182031 2 screw plug vis de fermeture verschlussschraube
H 2812 -906-M14X1,5-ST-A3C-LOCTITE506
10 04251884 6 plug bouchon stopfen
11 04250086 1 ring anneau ring
12 01148032 9 plug bouchon stopfen
DIN 443 -A45-ZNPHR
13 01179634 6 plug bouchon stopfen
H 2860 -A36-ST-FE/ZNPHR
14 01100940 2 plug bouchon stopfen
DIN 7604 -AM14X1,5-ST-A4C
15 04202518 1 sleeve douille buchse
16 04226536 1 plug bouchon verschlussstopfen
17 04202517 1 sleeve douille buchse
185 01016125 1 safety/lock.agent resine-frein sicherungsmittel
H 699 -DEUTZDW72-250ML
307.6055.3.6 Sheet 1 F
6. Agrotron K 90 K 100 K 120 Profiline
Section: ENGINE SUBAS: 89 Ref. 2
OIL PAN
CARTER D’HUILE
ÖLWANNE
Fig Part Nr Qty Description Dénomination Bezeichnung
Renewal time (d/h)
1 04197979 1 oil pan carter d'huile oelwanne
- T. = 6.0 -> (0.0 + 6.0 [Cod. 1002])
WITH ITEM ....
AVEC REP...
MIT POS....
AVEC POSTE....
(2,3)
2 01123690 1 plug bouchon stopfen
DIN 910 -M18X1,5-ST-ZNPHRF
3 01118718 1 gasket (18x24) joint dichtung
DIN 7603 -A18X24-CU
4 01143362 15 screw vis schraube
EN 1662 -F-M8X35-10.9-A4C
5 01180364 5 screw vis schraube
EN 1662 -F-M8X110-10.9-GESCHW
6 01144463 2 screw vis schraube
EN 1662 -F-M8X130-10.9-GESCHW
7 04195512 1 gasket joint dichtung
- T. = 6.0 -> (0.0 + 6.0 [Cod. 1002])
234 01016103 1 safety/lock.agent resine-frein sicherungsmittel
H 699 -DEUTZDW74-300ML
307.6055.3.6 Sheet 1 F
7. Agrotron K 110 Profiline
Section: ENGINE SUBAS: 52 Ref. 2/1
OIL PAN
CARTER D’HUILE
ÖLWANNE
Fig Part Nr Qty Description Dénomination Bezeichnung
Renewal time (d/h)
1 04253546 1 oil pan carter d'huile oelwanne
- T. = 6.0 -> (0.0 + 6.0 [Cod. 1002])
2 01123690 1 plug bouchon stopfen
DIN 910 -M18X1,5-ST-ZNPHRF
3 01118718 1 gasket (18x24) joint dichtung
DIN 7603 -A18X24-CU
4 01143362 21 screw vis schraube
EN 1662 -F-M8X35-10.9-A4C
5 01180364 5 screw vis schraube
EN 1662 -F-M8X110-10.9-GESCHW
6 01144463 2 screw vis schraube
EN 1662 -F-M8X130-10.9-GESCHW
7 04195829 1 gasket joint dichtung
- T. = 6.0 -> (0.0 + 6.0 [Cod. 1002])
243 01016103 1 safety/lock.agent resine-frein sicherungsmittel
H 699 -DEUTZDW74-300ML
307.6055.3.6 Sheet 1 F
8. Agrotron K 90 K 100 K 110 K 120 Profiline
Section: ENGINE SUBAS: 18 Ref. 2/3
FLYWHEEL
VOLANT
SCHWUNGRAD
Fig Part Nr Qty Description Dénomination Bezeichnung
Renewal time (d/h)
1 04208193 1 flywheel volant moteur schwungrad
- T. = 4.2 -> (1.2 + 3.0 [Cod. 0714])
WITH ITEM ....
AVEC REP...
MIT POS....
AVEC POSTE....
(2)
2 02131081 1 crown wheel couronne zahnkranz
- T. = 4.7 -> (1.7 + 3.0 [Cod. 0714])
307.6055.3.6 Sheet 1 F
9. Agrotron K 90 K 100 K 120 Profiline
Section: ENGINE SUBAS: 75 Ref. 2/6
COUNTERWEIGHTS
MASSES CONTRE-TOURNANTES
GEGENLAUFENDE MASSEN
Fig Part Nr Qty Description Dénomination Bezeichnung
Renewal time (d/h)
3 04251345 2 bushing bague lagerbuchse
4 04255905 2 gear engrenage zahnrad
- T. = 7.5 -> (4.5 + 3.0 [Cod. 0714])
5 01181673 2 screw vis schraube
H 2091 -7991-M8X45-10.9-GESCHW-MK-1.0
6 04255410 1 ring anneau ring
8 01148220 2 hexagon bolt vis tete hexagonal sechskantschraube
ISO 4017 -M8X10-8.8-ZNAL-A
9 01118647 2 oil seal (8x11,5 d7603) joint d'étanchéité Dichtring
DIN 7603 -A8X11,5-CU
11 01181582 1 shouldered washer anneau d'appui distanzring
H 2927 -7X1,5-ACM-1-70
12 04255412 1 pin axe bolzen
307.6055.3.6 Sheet 1 F
10. Agrotron K 90 K 100 K 110 K 120 Profiline
Section: ENGINE SUBAS: 78 Ref. 2/7
V-GROOVED PULLEY
POULIE A GORGE
KEILRIEMENSCHEIBE
Fig Part Nr Qty Description Dénomination Bezeichnung
Renewal time (d/h)
1 04253406 4 torx-head bolt vis a tete torx torx-schraube
2 01181404 1 pin goupille stift
H 2341 -B18X24-FE/ZN12C*
3 04283919 1 v-belt pulley poulie courroie trapézoïdalekeilriemenscheibe
- T. = 1.8 -> (0.3 + 1.5 [Cod. 0401])
307.6055.3.6 Sheet 1 F
11. Agrotron K 90 K 100 K 120 Profiline
Section: ENGINE SUBAS: 91 Ref. 2/8
CRANKSHAFT
VILEBREQUIN
KURBELWELLE
Fig Part Nr Qty Description Dénomination Bezeichnung
Renewal time (d/h)
=> 01092655 - 10007671 <= Agrotron K 90 PROFILINE
=> 10009709 - 10010481 <= Agrotron K 90 PROFILINE
=> 10060405 - 10060417 <= Agrotron K 90 PROFILINE
=> 10066927 - 10077907 <= Agrotron K 90 PROFILINE
=> 01092657 - 01092660 <= Agrotron K 100 PROFILINE
=> 10010482 - 10014269 <= Agrotron K 100 PROFILINE
=> 10061206 - 10061218 <= Agrotron K 100 PROFILINE
=> 10063177 - 10078595 <= Agrotron K 100 PROFILINE
=> 10079263 - 10079268 <= Agrotron K 100 PROFILINE
=> 01092661 - 01092780 <= Agrotron K 120 PROFILINE
=> 10070546 - 10071911 <= Agrotron K 120 PROFILINE
1 04289041 1 crank shaft vilebrequin kurbelwelle
- T. = 5.5 -> (5.0 + 0.5 [Cod. 0902])
2 02931062 5 crankshaft bearing palier de vilebrequinkurbelwellenlager
NORMAL (A) MM RD,
NORMAL (A) MM RD,
NORMAL (A) MM RD,
UNDERSIZE STEP SEE ITEM(B)
NIVEAU DE MINORATION, VOIR REF. (B)
UNTERMASSTUFE SIEHE POS.(B)
A = 84,00
B = 952
3 02931331 2 thrust washer rondelle de pousséeanlaufscheibe
NORMAL (A)MM, OVERSIZE STEP
NORMAL (A)MM, NIVEAU DE MAJORATION
NORMAL (A)MM, UEBERMASSTUFE
SEE ITEM (B)
VOIR REF. (B)
SIEHE POS. (B)
POS. (B)
A = 2,00
B = 953
5 01172066 1 threaded insert intercalaire taraudégewindeeinsatz
H 2358 -AM10X1X20
307.6055.3.6 Sheet 1
12. Agrotron K 90 K 100 K 120 Profiline
Section: ENGINE SUBAS: 91 Ref. 2/8
CRANKSHAFT
VILEBREQUIN
KURBELWELLE
Fig Part Nr Qty Description Dénomination Bezeichnung
Renewal time (d/h)
6 02931063 2 thrust washer rondelle de pousséeanlaufscheibe
NORMAL (A)MM, OVERSIZE STEP
NORMAL (A)MM, NIVEAU DE MAJORATION
NORMAL (A)MM, UEBERMASSTUFE
SEE ITEM (B)
VOIR REF. (B)
SIEHE POS. (B)
POS. (B)
A = 2,00
B = 963
952 02931071 1 crankshaft bearing palier de vilebrequinkurbelwellenlager
1ST UNDERSIZE
1ERE COTE EN SOUS-DIMENSION
1. UNTERMASSTUFE
1ST UNDERSIZE
1A MEDIDA DE DESGASTE
1ERE COTE EN SOUS-DIMENSION
83,75 MM RD
953 02931332 1 thrust washer rondelle de pousséeanlaufscheibe
1ST OVERSIZE
1ERE COTE EN SURDIMENSION
1. UEBERMASSTUFE
1ST OVERSIZE
1A SOBREMEDIDA
1ERE COTE EN SURDIMENSION
2,20 MM
963 02931074 1 thrust washer rondelle de pousséeanlaufscheibe
1ST OVERSIZE
1ERE COTE EN SURDIMENSION
1. UEBERMASSTUFE
1ST OVERSIZE
1A SOBREMEDIDA
307.6055.3.6 Sheet 2
13. Agrotron K 90 K 100 K 120 Profiline
Section: ENGINE SUBAS: 91 Ref. 2/8
CRANKSHAFT
VILEBREQUIN
KURBELWELLE
Fig Part Nr Qty Description Dénomination Bezeichnung
Renewal time (d/h)
1ERE COTE EN SURDIMENSION
2.20 MM
307.6055.3.6 Sheet 3 F
14. Agrotron K 110 Profiline
Section: ENGINE SUBAS: 38 Ref. 3
VIBRATION DAMPER
AMORT.VIBRATIONS
SCHWINGUNGSDÄMPFER
Fig Part Nr Qty Description Dénomination Bezeichnung
Renewal time (d/h)
1 04197566 1 vibration damper amortisseur de vib.vibrationsdaempfer
- T. = 1.8 -> (0.3 + 1.5 [Cod. 0401])
307.6055.3.6 Sheet 1 F
15. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
16. Agrotron K 110 Profiline
Section: ENGINE SUBAS: 91 Ref. 3/2
CRANKSHAFT
VILEBREQUIN
KURBELWELLE
Fig Part Nr Qty Description Dénomination Bezeichnung
Renewal time (d/h)
=> 01092692 - 01092781 <= Agrotron K 110 PROFILINE
=> 10063954 - 10078614 <= Agrotron K 110 PROFILINE
=> 10079739 - 10081668 <= Agrotron K 110 PROFILINE
1 04289039 1 crank shaft vilebrequin kurbelwelle
- T. = 6.5 -> (5.0 + 1.5 [Cod. 0401])
2 02931062 7 crankshaft bearing palier de vilebrequinkurbelwellenlager
NORMAL (A) MM RD,
NORMAL (A) MM RD,
NORMAL (A) MM RD,
UNDERSIZE STEP SEE ITEM(B)
NIVEAU DE MINORATION, VOIR REF. (B)
UNTERMASSTUFE SIEHE POS.(B)
A = 84,00
B = 952
3 02931331 2 thrust washer rondelle de pousséeanlaufscheibe
NORMAL (A)MM, OVERSIZE STEP
NORMAL (A)MM, NIVEAU DE MAJORATION
NORMAL (A)MM, UEBERMASSTUFE
SEE ITEM (B)
VOIR REF. (B)
SIEHE POS. (B)
POS. (B)
A = 2,00
B = 953
5 01172066 1 threaded insert intercalaire taraudégewindeeinsatz
H 2358 -AM10X1X20
6 02931063 1 thrust washer rondelle de pousséeanlaufscheibe
NORMAL (A)MM, OVERSIZE STEP
NORMAL (A)MM, NIVEAU DE MAJORATION
NORMAL (A)MM, UEBERMASSTUFE
307.6055.3.6 Sheet 1
17. Agrotron K 110 Profiline
Section: ENGINE SUBAS: 91 Ref. 3/2
CRANKSHAFT
VILEBREQUIN
KURBELWELLE
Fig Part Nr Qty Description Dénomination Bezeichnung
Renewal time (d/h)
SEE ITEM (B)
VOIR REF. (B)
SIEHE POS. (B)
POS. (B)
A = 2,0 MM
B = 963
952 02931071 1 crankshaft bearing palier de vilebrequinkurbelwellenlager
1ST UNDERSIZE
1ERE COTE EN SOUS-DIMENSION
1. UNTERMASSTUFE
1ST UNDERSIZE
1A MEDIDA DE DESGASTE
1ERE COTE EN SOUS-DIMENSION
83,75 MM RD
953 02931332 1 thrust washer rondelle de pousséeanlaufscheibe
1ST OVERSIZE
1ERE COTE EN SURDIMENSION
1. UEBERMASSTUFE
1ST OVERSIZE
1A SOBREMEDIDA
1ERE COTE EN SURDIMENSION
2,20 MM
963 02931074 1 thrust washer rondelle de pousséeanlaufscheibe
1ST OVERSIZE
1ERE COTE EN SURDIMENSION
1. UEBERMASSTUFE
1ST OVERSIZE
1A SOBREMEDIDA
1ERE COTE EN SURDIMENSION
2.20 MM
307.6055.3.6 Sheet 2 F
18. Agrotron K 110 Profiline
Section: ENGINE SUBAS: 53 Ref. 3/3
CRANKSHAFT
VILEBREQUIN
KURBELWELLE
Fig Part Nr Qty Description Dénomination Bezeichnung
Renewal time (d/h)
=> 10085449 - 10085478 <= Agrotron K 110 PROFILINE
=> 10088957 - 10088960 <= Agrotron K 110 PROFILINE
=> 10089350 - 10090504 <= Agrotron K 110 PROFILINE
=> 10090505 - 10093440 <= Agrotron K 110 PROFILINE
=> 10089042 - 10090050 <= Agrotron K 110 PROFILINE
=> 10094203 - 10098784 <= Agrotron K 110 PROFILINE
=> 10103975 - 10105072 <= Agrotron K 110 PROFILINE
=> 10107345 - 10112002 <= Agrotron K 110 PROFILINE
=> 10112822 - 10116592 <= Agrotron K 110 PROFILINE
=> 10119676 - 10121479 <= Agrotron K 110 PROFILINE
=> 10123580 - 10127265 <= Agrotron K 110 PROFILINE
=> 10130452 - 10132635 <= Agrotron K 110 PROFILINE
=> 10131054 - 10131056 <= Agrotron K 110 PROFILINE
1 04292804 1 crank shaft vilebrequin kurbelwelle
- T. = 5.5
2 02931062 7 crankshaft bearing palier de vilebrequinkurbelwellenlager
NORMAL (A) MM RD,
NORMAL (A) MM RD,
NORMAL (A) MM RD,
UNDERSIZE STEP SEE ITEM(B)
NIVEAU DE MINORATION, VOIR REF. (B)
UNTERMASSTUFE SIEHE POS.(B)
A = 84,00
B = POS. 952
3 02931331 2 thrust washer rondelle de pousséeanlaufscheibe
NORMAL (A)MM, OVERSIZE STEP
NORMAL (A)MM, NIVEAU DE MAJORATION
NORMAL (A)MM, UEBERMASSTUFE
SEE ITEM (B)
VOIR REF. (B)
SIEHE POS. (B)
POS. (B)
307.6055.3.6 Sheet 1
19. Agrotron K 110 Profiline
Section: ENGINE SUBAS: 53 Ref. 3/3
CRANKSHAFT
VILEBREQUIN
KURBELWELLE
Fig Part Nr Qty Description Dénomination Bezeichnung
Renewal time (d/h)
A = 2,00
B = Pos. 953
5 01172066 10 threaded insert intercalaire taraudégewindeeinsatz
H 2358 -AM10X1X20
6 02931063 2 thrust washer rondelle de pousséeanlaufscheibe
NORMAL (A)MM, OVERSIZE STEP
NORMAL (A)MM, NIVEAU DE MAJORATION
NORMAL (A)MM, UEBERMASSTUFE
SEE ITEM (B)
VOIR REF. (B)
SIEHE POS. (B)
POS. (B)
A = 2,00
B = Pos. 963
952 02931071 1 crankshaft bearing palier de vilebrequinkurbelwellenlager
1ST UNDERSIZE
1ERE COTE EN SOUS-DIMENSION
1. UNTERMASSTUFE
1ST UNDERSIZE
1A MEDIDA DE DESGASTE
1ERE COTE EN SOUS-DIMENSION
83,75 mm
953 02931332 1 thrust washer rondelle de pousséeanlaufscheibe
1ST OVERSIZE
1ERE COTE EN SURDIMENSION
1. UEBERMASSTUFE
1ST OVERSIZE
1A SOBREMEDIDA
1ERE COTE EN SURDIMENSION
2,20 MM
963 02931074 1 thrust washer rondelle de pousséeanlaufscheibe
307.6055.3.6 Sheet 2