The document summarizes a Bosch LC2-PC30G6-8 premium ceiling loudspeaker. It is an 8-inch, two-way speaker with a wide dispersion pattern, high efficiency, and protection circuits. It can be used for voice alarm systems and complies with relevant standards. The speaker has multiple power taps and can be installed in a variety of ceiling types.
The document describes the LC2-PC60G8-8H premium-sound high ceiling loudspeaker. It is an 8-inch two-way speaker with a waveguide coupled tweeter, full bandwidth overload protection, and front baffle wattage tap adjustment. It provides wide dispersion, high efficiency, high maximum output, and ease of installation. It is designed for use in voice alarm systems and compliant with British and European safety standards.
The document provides specifications for the LBC 3484/00 Horn Loudspeaker. It is a 50W, circular horn loudspeaker measuring 490mm in diameter made of aluminum with a water and dust protected rating of IP65. It has high efficiency and is ideal for outdoor applications like sports grounds, parks, and pools providing excellent speech reproduction over a wide area.
The document describes the Evolution Wireless G3 wireless microphone system, including details of the features of the rackmount receiver, bodypack transmitter, and clip-on microphones. It provides specifications for the system such as frequency ranges, switching bandwidth, battery life, dimensions, and transducer specifications. The system is designed to allow performers freedom of movement on stage while providing clear and powerful sound transmission free of ambient noise.
The document describes the Evolution Wireless G3 wireless microphone system, including details of the features of the rackmount receiver, bodypack transmitter, and clip-on microphones. It provides specifications for the system such as frequency ranges, switching bandwidth, battery life, dimensions, and transducer specifications. The system is designed to allow performers freedom of movement on stage while providing clear and powerful sound transmission free of ambient noise.
The MTR3000 is a MOTOTRBO integrated base station/repeater designed for small public safety, utility and commercial organizations. It operates in both analog and digital modes, including MOTOTRBO systems, to provide increased capacity, integrated data applications, and enhanced voice communications. An upgrade kit is available to allow existing MTR2000 stations to operate on MOTOTRBO systems. The MTR3000 has standard features such as 100W output power, diagnostic software, and easy component replacement.
The document summarizes the LBC 3086/41 Ceiling Loudspeaker. It is a 6W dual-cone loudspeaker intended for speech and music reproduction that can be flush mounted in ceilings. It has a 100V matching transformer and is designed for use in voice alarm systems compliant with British Standard BS5839 part 8. It has protection features to maintain circuit integrity in the event of a fire and can be fitted with an optional fire dome for additional cable termination protection.
The Sennheiser Presentation Set 500 series offers reliable wireless sound transmission for presentations. It features a small clip-on microphone, programmable mute switch, and automatic frequency management for the transmitter and receiver. Presenters can move freely while their voices can still be heard in the back of large rooms. The transmitter connects to the microphone via a discreetly hidden cable under clothing. The system provides professional quality wireless audio transmission suitable for TV studios and large stages.
The document describes a presentation set that offers professional quality wireless audio transmission for conferences and presentations. The small clip-on microphone can be worn discreetly and picks up sound well from even the back row without needing increased volume. The system provides automatic frequency management across a wide range of tunable frequencies to avoid interference. It offers clear transmission and reception as well as long battery life from the compact transmitter bodypack.
The document describes the LC2-PC60G8-8H premium-sound high ceiling loudspeaker. It is an 8-inch two-way speaker with a waveguide coupled tweeter, full bandwidth overload protection, and front baffle wattage tap adjustment. It provides wide dispersion, high efficiency, high maximum output, and ease of installation. It is designed for use in voice alarm systems and compliant with British and European safety standards.
The document provides specifications for the LBC 3484/00 Horn Loudspeaker. It is a 50W, circular horn loudspeaker measuring 490mm in diameter made of aluminum with a water and dust protected rating of IP65. It has high efficiency and is ideal for outdoor applications like sports grounds, parks, and pools providing excellent speech reproduction over a wide area.
The document describes the Evolution Wireless G3 wireless microphone system, including details of the features of the rackmount receiver, bodypack transmitter, and clip-on microphones. It provides specifications for the system such as frequency ranges, switching bandwidth, battery life, dimensions, and transducer specifications. The system is designed to allow performers freedom of movement on stage while providing clear and powerful sound transmission free of ambient noise.
The document describes the Evolution Wireless G3 wireless microphone system, including details of the features of the rackmount receiver, bodypack transmitter, and clip-on microphones. It provides specifications for the system such as frequency ranges, switching bandwidth, battery life, dimensions, and transducer specifications. The system is designed to allow performers freedom of movement on stage while providing clear and powerful sound transmission free of ambient noise.
The MTR3000 is a MOTOTRBO integrated base station/repeater designed for small public safety, utility and commercial organizations. It operates in both analog and digital modes, including MOTOTRBO systems, to provide increased capacity, integrated data applications, and enhanced voice communications. An upgrade kit is available to allow existing MTR2000 stations to operate on MOTOTRBO systems. The MTR3000 has standard features such as 100W output power, diagnostic software, and easy component replacement.
The document summarizes the LBC 3086/41 Ceiling Loudspeaker. It is a 6W dual-cone loudspeaker intended for speech and music reproduction that can be flush mounted in ceilings. It has a 100V matching transformer and is designed for use in voice alarm systems compliant with British Standard BS5839 part 8. It has protection features to maintain circuit integrity in the event of a fire and can be fitted with an optional fire dome for additional cable termination protection.
The Sennheiser Presentation Set 500 series offers reliable wireless sound transmission for presentations. It features a small clip-on microphone, programmable mute switch, and automatic frequency management for the transmitter and receiver. Presenters can move freely while their voices can still be heard in the back of large rooms. The transmitter connects to the microphone via a discreetly hidden cable under clothing. The system provides professional quality wireless audio transmission suitable for TV studios and large stages.
The document describes a presentation set that offers professional quality wireless audio transmission for conferences and presentations. The small clip-on microphone can be worn discreetly and picks up sound well from even the back row without needing increased volume. The system provides automatic frequency management across a wide range of tunable frequencies to avoid interference. It offers clear transmission and reception as well as long battery life from the compact transmitter bodypack.
This document provides information on the LHM 0606/10 Ceiling Loudspeaker. It is a 6W general purpose ceiling speaker suitable for speech and music reproduction. It easily mounts flush into ceilings and has an optional fire dome. Key features include unobtrusive design, simple installation, multiple power settings, and compliance with safety regulations.
The document discusses the Evolution Wireless G 500 Series Instrument Set from Sennheiser. It provides wireless transmission for live music performances, freeing the performer from cables. The ultra-light transmitter can be attached discreetly and has an easy-to-read display. A new feature is an integrated guitar tuner in the receiver to eliminate the need for a separate device. It offers durable metal housing, integrated wireless options and battery life of over 8 hours from AA batteries.
The vocal set of the 100 series wireless microphone system provides crystal clear sound reproduction for lead singers. It features a sturdy metal housing and uses true diversity wireless technology for reliable reception. The system includes a rack-mount receiver and handheld transmitter that uses AA batteries for over 8 hours of use. The transmitter accepts interchangeable microphone heads from Sennheiser's 800 series for different pick-up patterns.
The HeadSet 100 series is a wireless microphone system that allows singers, dancers, and fitness instructors to move freely on stage while keeping their hands free. The condenser headset microphone is lightweight and provides crystal clear sound that can reach the back of large venues. The system includes a rack-mount receiver, handheld transmitter, and headset microphone with optimized acoustics. It offers features such as automatic frequency management, tunable UHF frequencies, and a programmable mute switch.
The Plena Tone Module is an extension to Bosch's Plena line of equipment that offers four different signal tones - evacuation, alert, time signal, and chime. It generates these tones and has a stereo line input. When an input contact is closed, the corresponding tone is sounded and the line input is muted. It is intended to be installed in line with a Plena mixer or amplifier input without using an additional input channel. The module complies with international standards for emergency tones and notification signals.
The document summarizes the features of the Sennheiser Evolution Wireless G 500 series instrument set for wireless audio transmission. It provides wireless transmission of audio from musical instruments without cables. Key features highlighted include a sturdy metal housing, tunable UHF frequencies across a wide bandwidth, an integrated guitar tuner, programmable mute function, and long battery life of over 8 hours. It also lists updated features for the new 500 series such as Ethernet connectivity, wireless transmitter sync, and increased frequency range/bandwidth.
The document summarizes the features of the Sennheiser Evolution Wireless G 500 series instrument set for wireless audio transmission. It provides wireless transmission of audio from musical instruments without cables. Key features highlighted include a sturdy metal housing, tunable UHF frequencies across a wide bandwidth, an integrated guitar tuner, programmable mute function, and battery life of over 8 hours. It also lists updated features for the new 500 series such as Ethernet connectivity, wireless syncing of transmitters, and increased frequency range and audio sensitivity.
The Sennheiser 100 series wireless instrument system consists of a rack-mount receiver and lightweight bodypack transmitter that provides wireless freedom of movement during performances. The system features an integrated guitar tuner, automatic frequency management across a wide range, and a clear display. It is designed to eliminate cables and allow musicians to perform anywhere on stage.
This document provides information on two horn loudspeaker models, the LBC 3482/00 and LBC 3483/00. The loudspeakers are high efficiency, water and dust protected, have adjustable mounting brackets, and produce excellent speech reproduction for outdoor applications. Key details include their power ratings, frequency responses, polar diagrams, dimensions and ordering information.
The Plena two-zone call station is a modern call station that allows users to make calls to two zones in a public address system. It has a stable metal base, flexible microphone, and LED indicators to show zone selection and call status. The call station features selectable gain and speech filtering to improve intelligibility, and can be daisy chained with other call stations for a maximum range of 200 meters from the mixer.
The Sennheiser 100 series wireless instrument set consists of a bodypack transmitter and rack-mount receiver. The transmitter attaches inconspicuously and has a clear display. The receiver has an integrated guitar tuner, automatic frequency management across a wide range, and true diversity for optimal reception. The set provides cable-free freedom of movement and high quality audio transmission for musicians.
The document summarizes two Plena amplifier models, the PLE-1P120-EU and PLE-1P240-EU. The amplifiers provide 120W and 240W respectively to constant voltage or 8 ohm loads. They have 1V and 100V line inputs, and 70V, 100V, and 8 ohm outputs. Protections include overload and short circuit protection, with temperature controlled cooling. Both models operate on mains power with a 24V battery backup that charges automatically.
The MTR3000 is a MOTOTRBOTM integrated voice and data base station/repeater designed for small public safety, utility and commercial organizations. It operates in both analog and digital modes, including MOTOTRBO Conventional, IP Site Connect, and Capacity Plus systems. This provides increased capacity, spectral efficiency, integrated data applications and enhanced voice communications. It also has backward compatibility to operate in analog mode. For current MTR2000 customers, an upgrade kit is available to allow their existing investment to operate on a MOTOTRBO system.
This document provides information on the LC2-PC60G6-10 Premium-sound Subwoofer Ceiling Loudspeaker 60W. It is a 10-inch subwoofer designed to augment the low frequency response of full range ceiling loudspeakers. Key features include a 10-inch high-excursion driver, low pass network, wattage tap adjustment, tile bridge, and compliance with various standards. It is designed for voice alarm applications and provides extended low frequency performance and overload protection for safe and effective operation.
The document summarizes a ceiling loudspeaker model LBC 3086/41 from Bosch. It is a 6W dual-cone loudspeaker with an integrated metal grille, suitable for both speech and music. It has a built-in 100V matching transformer and ceramic terminal blocks. An optional certified fire dome can provide additional protection for the cable termination. The loudspeaker is designed for voice alarm systems and complies with various certifications for safety, water and dust protection, and fire performance.
The document summarizes Bosch professional horn loudspeaker driver units. It describes three driver unit models (15W, 30W, 50W) that can be installed into compatible circular or rectangular horns. The driver units include transformers to allow for power tapping and impedance matching to different amplifiers. A range of compatible horns are available to allow customized sound reinforcement solutions.
The LBC 3095/15 is a pendant sphere loudspeaker designed to be suspended from ceilings. It has a pleasing spherical shape and is available in white. It is splash-waterproof and suitable for outdoor use. The loudspeaker produces high-quality sound and has a frequency response of 130Hz to 20kHz. It has a power handling of 15W with a rated power of 10/5/2.5W and sound pressure level of 99dB. The enclosure is made from durable ABS plastic.
The document provides specifications for the LBC 3484/00 Horn Loudspeaker. It is a 50W circular horn loudspeaker measuring 490mm in diameter made of aluminum with a water and dust protected rating of IP65. It has high efficiency and is ideal for outdoor applications like sports grounds, parks, and pools providing excellent speech reproduction over a wide area.
The LBC 3090/01 is an economic ceiling loudspeaker for speech and music reproduction in various indoor spaces. It has a 6W dual cone loudspeaker, 100V matching transformer, and protective dust cover. Installation is quick with built-in spring locks to secure it in ceiling panels from 9-25mm thick. It provides full range sound reproduction from 70Hz to 18kHz and has an opening angle of 160 degrees at 1kHz and 55 degrees at 4kHz.
The LBC 3090/01 is an economic ceiling loudspeaker suitable for speech and music reproduction. It has increased sensitivity and is easy to flush-mount in ceilings. The loudspeaker has a dual cone design, transformer, and protective dust cover. It is designed for general use in various indoor spaces like shops, schools, and hotels.
The document summarizes a CCTV ceiling loudspeaker. It is a 6W dual-cone loudspeaker that mounts flush in ceilings for speech and music reproduction. It has a 100V matching transformer and optional fire dome. It is designed for voice alarm systems and complies with international safety standards for public address systems.
The document provides information on the LBC 3950/01 Ceiling Loudspeaker. It is a compact 6W loudspeaker with a circular plastic grille. It has excellent audio performance and is easy to install with integral mounting clips. It is IPx4 water protected, making it suitable for humid environments like bathrooms.
This document provides information on the LHM 0606/10 Ceiling Loudspeaker. It is a 6W general purpose ceiling speaker suitable for speech and music reproduction. It easily mounts flush into ceilings and has an optional fire dome. Key features include unobtrusive design, simple installation, multiple power settings, and compliance with safety regulations.
The document discusses the Evolution Wireless G 500 Series Instrument Set from Sennheiser. It provides wireless transmission for live music performances, freeing the performer from cables. The ultra-light transmitter can be attached discreetly and has an easy-to-read display. A new feature is an integrated guitar tuner in the receiver to eliminate the need for a separate device. It offers durable metal housing, integrated wireless options and battery life of over 8 hours from AA batteries.
The vocal set of the 100 series wireless microphone system provides crystal clear sound reproduction for lead singers. It features a sturdy metal housing and uses true diversity wireless technology for reliable reception. The system includes a rack-mount receiver and handheld transmitter that uses AA batteries for over 8 hours of use. The transmitter accepts interchangeable microphone heads from Sennheiser's 800 series for different pick-up patterns.
The HeadSet 100 series is a wireless microphone system that allows singers, dancers, and fitness instructors to move freely on stage while keeping their hands free. The condenser headset microphone is lightweight and provides crystal clear sound that can reach the back of large venues. The system includes a rack-mount receiver, handheld transmitter, and headset microphone with optimized acoustics. It offers features such as automatic frequency management, tunable UHF frequencies, and a programmable mute switch.
The Plena Tone Module is an extension to Bosch's Plena line of equipment that offers four different signal tones - evacuation, alert, time signal, and chime. It generates these tones and has a stereo line input. When an input contact is closed, the corresponding tone is sounded and the line input is muted. It is intended to be installed in line with a Plena mixer or amplifier input without using an additional input channel. The module complies with international standards for emergency tones and notification signals.
The document summarizes the features of the Sennheiser Evolution Wireless G 500 series instrument set for wireless audio transmission. It provides wireless transmission of audio from musical instruments without cables. Key features highlighted include a sturdy metal housing, tunable UHF frequencies across a wide bandwidth, an integrated guitar tuner, programmable mute function, and long battery life of over 8 hours. It also lists updated features for the new 500 series such as Ethernet connectivity, wireless transmitter sync, and increased frequency range/bandwidth.
The document summarizes the features of the Sennheiser Evolution Wireless G 500 series instrument set for wireless audio transmission. It provides wireless transmission of audio from musical instruments without cables. Key features highlighted include a sturdy metal housing, tunable UHF frequencies across a wide bandwidth, an integrated guitar tuner, programmable mute function, and battery life of over 8 hours. It also lists updated features for the new 500 series such as Ethernet connectivity, wireless syncing of transmitters, and increased frequency range and audio sensitivity.
The Sennheiser 100 series wireless instrument system consists of a rack-mount receiver and lightweight bodypack transmitter that provides wireless freedom of movement during performances. The system features an integrated guitar tuner, automatic frequency management across a wide range, and a clear display. It is designed to eliminate cables and allow musicians to perform anywhere on stage.
This document provides information on two horn loudspeaker models, the LBC 3482/00 and LBC 3483/00. The loudspeakers are high efficiency, water and dust protected, have adjustable mounting brackets, and produce excellent speech reproduction for outdoor applications. Key details include their power ratings, frequency responses, polar diagrams, dimensions and ordering information.
The Plena two-zone call station is a modern call station that allows users to make calls to two zones in a public address system. It has a stable metal base, flexible microphone, and LED indicators to show zone selection and call status. The call station features selectable gain and speech filtering to improve intelligibility, and can be daisy chained with other call stations for a maximum range of 200 meters from the mixer.
The Sennheiser 100 series wireless instrument set consists of a bodypack transmitter and rack-mount receiver. The transmitter attaches inconspicuously and has a clear display. The receiver has an integrated guitar tuner, automatic frequency management across a wide range, and true diversity for optimal reception. The set provides cable-free freedom of movement and high quality audio transmission for musicians.
The document summarizes two Plena amplifier models, the PLE-1P120-EU and PLE-1P240-EU. The amplifiers provide 120W and 240W respectively to constant voltage or 8 ohm loads. They have 1V and 100V line inputs, and 70V, 100V, and 8 ohm outputs. Protections include overload and short circuit protection, with temperature controlled cooling. Both models operate on mains power with a 24V battery backup that charges automatically.
The MTR3000 is a MOTOTRBOTM integrated voice and data base station/repeater designed for small public safety, utility and commercial organizations. It operates in both analog and digital modes, including MOTOTRBO Conventional, IP Site Connect, and Capacity Plus systems. This provides increased capacity, spectral efficiency, integrated data applications and enhanced voice communications. It also has backward compatibility to operate in analog mode. For current MTR2000 customers, an upgrade kit is available to allow their existing investment to operate on a MOTOTRBO system.
This document provides information on the LC2-PC60G6-10 Premium-sound Subwoofer Ceiling Loudspeaker 60W. It is a 10-inch subwoofer designed to augment the low frequency response of full range ceiling loudspeakers. Key features include a 10-inch high-excursion driver, low pass network, wattage tap adjustment, tile bridge, and compliance with various standards. It is designed for voice alarm applications and provides extended low frequency performance and overload protection for safe and effective operation.
The document summarizes a ceiling loudspeaker model LBC 3086/41 from Bosch. It is a 6W dual-cone loudspeaker with an integrated metal grille, suitable for both speech and music. It has a built-in 100V matching transformer and ceramic terminal blocks. An optional certified fire dome can provide additional protection for the cable termination. The loudspeaker is designed for voice alarm systems and complies with various certifications for safety, water and dust protection, and fire performance.
The document summarizes Bosch professional horn loudspeaker driver units. It describes three driver unit models (15W, 30W, 50W) that can be installed into compatible circular or rectangular horns. The driver units include transformers to allow for power tapping and impedance matching to different amplifiers. A range of compatible horns are available to allow customized sound reinforcement solutions.
The LBC 3095/15 is a pendant sphere loudspeaker designed to be suspended from ceilings. It has a pleasing spherical shape and is available in white. It is splash-waterproof and suitable for outdoor use. The loudspeaker produces high-quality sound and has a frequency response of 130Hz to 20kHz. It has a power handling of 15W with a rated power of 10/5/2.5W and sound pressure level of 99dB. The enclosure is made from durable ABS plastic.
The document provides specifications for the LBC 3484/00 Horn Loudspeaker. It is a 50W circular horn loudspeaker measuring 490mm in diameter made of aluminum with a water and dust protected rating of IP65. It has high efficiency and is ideal for outdoor applications like sports grounds, parks, and pools providing excellent speech reproduction over a wide area.
The LBC 3090/01 is an economic ceiling loudspeaker for speech and music reproduction in various indoor spaces. It has a 6W dual cone loudspeaker, 100V matching transformer, and protective dust cover. Installation is quick with built-in spring locks to secure it in ceiling panels from 9-25mm thick. It provides full range sound reproduction from 70Hz to 18kHz and has an opening angle of 160 degrees at 1kHz and 55 degrees at 4kHz.
The LBC 3090/01 is an economic ceiling loudspeaker suitable for speech and music reproduction. It has increased sensitivity and is easy to flush-mount in ceilings. The loudspeaker has a dual cone design, transformer, and protective dust cover. It is designed for general use in various indoor spaces like shops, schools, and hotels.
The document summarizes a CCTV ceiling loudspeaker. It is a 6W dual-cone loudspeaker that mounts flush in ceilings for speech and music reproduction. It has a 100V matching transformer and optional fire dome. It is designed for voice alarm systems and complies with international safety standards for public address systems.
The document provides information on the LBC 3950/01 Ceiling Loudspeaker. It is a compact 6W loudspeaker with a circular plastic grille. It has excellent audio performance and is easy to install with integral mounting clips. It is IPx4 water protected, making it suitable for humid environments like bathrooms.
The document provides information on the LBC 3950/01 Ceiling Loudspeaker. It is a compact 6W loudspeaker with a circular plastic grille. It has excellent audio performance and is easy to install with integral mounting clips. It is IPx4 water protected, making it suitable for humid environments like bathrooms.
The document provides information on the LBC 3950/01 Ceiling Loudspeaker. It is a compact 6W loudspeaker with a circular plastic grille. It has excellent audio performance and is easy to install with integral mounting clips. It is IPx4 water protected, making it suitable for humid environments like bathrooms.
The LBB 4433/00 Call Station Kit allows for custom call stations with 16 keypads. It has a built-in speech filter and limiter for clear audio, supports redundant networking, and can make emergency calls even if the network controller fails. The kit includes connectors and can be extended with numeric keypads.
The document provides information on the LBC 3951/11 Ceiling Loudspeaker. It is a compact 6W loudspeaker with a perforated metal grille. It has a wide frequency range and opening angle for good sound reproduction with fewer units. It is installation friendly with integral mounting clips and is water protected to IPx4 standard, making it suitable for humid environments.
The document provides information on the LBC 3951/11 Ceiling Loudspeaker. It is a compact 6W loudspeaker with a perforated metal grille. It has a wide frequency range and opening angle for good sound reproduction with fewer units. It is installation friendly with integral mounting clips and is water protected to IPx4 standard, making it suitable for humid environments.
The document summarizes a horn loudspeaker model LBC 3482/00. It is a 25W circular horn loudspeaker with an aluminum body that provides excellent speech reproduction for outdoor applications. It has water and dust protection, complies with various safety and emergency standards, and has a ceramic terminal block and thermal fuse for additional protection.
The Bosch LBC 3700/00 Horn Loudspeaker features a two-way system with a re-entrant horn and two transducers for high and low frequencies, producing high quality sound reproduction. It has high sensitivity, a wide opening angle, and an IP65 rating making it suitable for indoor and outdoor use. Installation is simple via mounting brackets and transformer taps that allow power adjustments in 3dB steps.
The LP1-BC10E-1 is a 10W bidirectional sound projector intended for high quality speech and music reproduction indoors and outdoors. It has two loudspeakers facing opposite directions, making it suitable for tunnels, corridors, and arcades. The projector is water and dust protected to IP65 and can be ceiling or wall mounted. It complies with various safety and installation standards and has protection to maintain circuit integrity in emergencies.
The document provides specifications for the LBC 3482/00 and LBC 3483/00 horn loudspeakers from Bosch. The loudspeakers are high efficiency, water and dust protected, and ideal for outdoor applications. They produce excellent speech reproduction with wide opening angles and adjustable mounting brackets. Key features include power taps for different wattage settings, IP65 protection, and international safety certifications.
The document summarizes a wireless headset system. The system includes a rack-mounted receiver, a bodypack transmitter, and a clip-on microphone. The wireless transmission provides interference-free sound to the back of the room. The small microphone clips onto clothing and the compact transmitter can also attach discreetly. This allows freedom of movement away from the lectern during presentations. The system provides clear sound quality with features like diversity reception and an HDX compander.
The LBC 3087/41 is a flush-mounted ceiling loudspeaker suitable for speech and music reproduction. It has increased sensitivity and is ball-proof. It complies with international safety regulations and British Standard BS5839 part 8 for voice alarm systems. An optional certified fire dome can further protect the loudspeaker from fire damage.
The PLN-DMY60 Plena Dummy Load is designed to improve the reliability of loudspeaker line impedance measurements for the Bosch Plena Voice Alarm System. It connects to the last loudspeaker on a line and provides a filtered electrical load at 20 kHz, allowing longer cable runs before cable capacitance starts interfering with measurements. It has settings for 8, 20, and 60 watt loads. A calculator helps determine the optimal dummy load setting for a given system configuration.
The call station keypad kit can be used with a call station kit or basic call station to make announcements or trigger predefined actions. It has 8 programmable inputs linked to 16 outputs and 2 serial interfaces to connect up to 16 keypads to a call station. The keypad gets power from the connected call station and its inputs can be programmed for different operation modes.
The PLN-2AIO120 is an all-in-one background music and paging system that includes a DVD/CD player, FM/AM tuner, microphone inputs, and dual-zone amplifier. It provides versatile playback of audio and video content for background music and announcements. Key features include MP3/video playback from discs, an FM/AM radio, priority microphone input, and separate volume control for two speaker zones.
This document summarizes the key features and specifications of the Bosch Plena Mixer Amplifier PLE-1MAxx0-EU. It has 4 microphone/line inputs, 3 music source inputs, and provides 30, 60, or 120 watts of output power. It offers priority and VOX activation on inputs, separate music volume control, detachable labeling, and integration with telephone paging systems. Installation is simplified with included mounting brackets and the amplifier can be configured via front panel controls and dip switches.
The PLE-1CS is a tabletop microphone intended for making calls in a public address system. It has a metal base and rubber feet for stability, and can be flush mounted. It uses a PTT button to activate the microphone, which can be configured for momentary or toggle mode. It has a 2m cable, LED indicator, and connects to amplifiers using a 5-pin Euro connector. The microphone is high quality, durable, and phantom powered.
This document provides information on the LBB 9600/20 condenser handheld microphone from Bosch. It is a unidirectional microphone intended for use in public address and sound reinforcement applications. Key features include a condenser transducer, low sensitivity to noise and vibrations, and phantom power supply. Accessories such as extension cables, stands, and mounts are also available.
The LBB 1949/00 is a high-quality gooseneck condenser microphone with a flexible stem that runs on phantom power. It has a unidirectional pickup pattern and includes a 2m cable and lockable connector. The microphone can be mounted on floors, lecterns, or desktops using its threaded base and included adapter. It has a sliding on/off switch and priority contacts for remote control.
The LBC 1215/01 Microphone Clamp is a quick-release, spring-loaded microphone holder that can be screwed onto stands with 3/8", 1/2" or 5/8" threads. It holds microphone stems measuring 19 to 32 mm in diameter and allows for friction angular adjustment. The clamp weighs 60 grams and has a matte black color. It is compatible with Bosch hand-held microphones.
The document summarizes a unidirectional handheld microphone made by Bosch. It has a dynamic transducer element, cardioid directivity, and rugged construction. It can be used either handheld or stand-mounted. It is intended for use in applications like shops, restaurants, and leisure centers to provide affordable public address solutions.
The document summarizes a range of Bosch volume controls and program selectors for public address systems. It describes the different models, their power ratings and features like failsafe operation. Diagrams show dimensions and wiring. The controls allow adjusting sound levels or selecting programs, and ensure emergency announcements are heard at a preset level.
The document provides information on Bosch volume controls and program selectors for public address systems in Japan. It describes the LBC 14x2/x0 volume controls, which come in 12W and 36W versions and power-save or failsafe options. It also describes the LBC 1434/10 program selector, which allows selecting between 5 channels. The components comply with international safety standards and have applications in both announcements and background music distribution in public settings.
The document summarizes Bosch's LBC 14x2/x0 Japanese Volume Controls and LBC 1434/10 Program Selector. The volume controls come in 12W and 36W versions and can be configured for power-saving or fail-safe operation. The program selector allows selection of up to five audio channels. Both products comply with international safety standards and provide simple installation, operation, and reliability for public address systems.
The document summarizes a range of Bosch volume controls and program selectors for public address systems. It describes the different models, their power ratings and features. The volume controls come in 12W, 36W and 100W versions and can be configured for power-save or fail-safe operation. The program selector allows selecting between five programs. Technical specifications and ordering information is also provided.
The PRS-SWCS PC Call Server and PRS-SWCSL PC Call Server NCO Client allow control of multiple Praesideo network controllers and connected clients over TCP/IP. The PRS-SWCS PC Call Server controls user access and call functions, while the PRS-SWCSL extends licensing to additional network controllers. Configured views, predefined calls, and audio connections between networks can be set up through the included configuration client.
The Praesideo software allows users to configure and monitor a Bosch communications system through a web-based interface. It includes configuration, diagnostic, and file transfer software. The configuration software can be accessed at different privilege levels and is used to define system parameters, call macros, zones, equipment settings, and more. The diagnostic software logs events and fault information for monitoring the system status. File transfer software manages uploading and downloading files to the network controller.
The network splitter provides two branches from the main cable run to feed power and network connections to Praesideo units. It supports redundant network connections, can supply power from an external source, and has indicators for power and fault status. The splitter inserts units into the main network without redundancy but allows separate selection of current for each tap-off.
The PRS-FIN, PRS-FINNA, and PRS-FINS fiber interfaces connect glass fiber optic cable to plastic fiber optic cable within Praesideo communication systems. They convert between the cable types and support redundant network connections. Each interface provides power and status indicators and includes two control inputs, except for the PRS-FINNA which lacks a network address and control inputs.
The document appears to be a price list from Sathit A.V.L.Supplies Co.,Ltd. for microphones, wireless microphone systems, mixing amplifiers, loudspeakers and other audio equipment. It includes product codes, descriptions, and prices excluding VAT for various microphones, mixers, amplifiers, loudspeakers and other audio equipment.
The PRS-CSR is a remote call station that connects to a Praesideo network via CAT-5 cable up to 1 km long. It uses standard Praesideo keypads and interfaces with the network through a PRS-CSI unit. The remote call station provides the same functionality as a basic call station and can be powered via CAT-5 cable or a local power supply.
The numeric keypad connects to a call station to allow for user access and zone selection via a 12-button keypad. It receives power from the call station and can be combined with up to 15 other keypads. The LCD provides feedback to the user about their selections and the system status. It has a flat cable connection and mechanical mounting to the call station.
1. Communications Systems | LC2‑PC30G6‑8 Premium‑sound Ceiling Loudspeaker 30W
LC2‑PC30G6‑8 Premium‑sound Ceiling
Loudspeaker 30W
www.boschsecurity.com
u 8‑inch coaxial two‑way
u Waveguide coupled Ti tweeter
u Full bandwidth overload protection
u Front baffle wattage tap adjustment
u BS 5839‑8 and EN 60849 compliant
The LC2‑PC30G6‑8 is a 8‑inch two‑way Premium‑sound Functions
Ceiling Loudspeaker which provides; wide dispersion,
high efficiency, high maximum output, Voice alarm loudspeaker
ease‑of‑installation, and wide‑range reproduction of Voice alarm loudspeakers are specifically designed for
music and voice. use in buildings where performance of systems for
It consists of a baffle assembly, grille, back‑can verbal evacuation announcements is governed by
enclosure, 8‑inch coax two‑way loudspeaker and regulations. The LC2‑PC30G6‑8 is designed for use in
internal output‑power matching transformer. The voice alarm systems and is compliant with British
loudspeaker features a waveguide coupled titanium Standard BS 5839‑8 and EN 60849.
coated dome tweeter. Protection
The rear enclosure provides an optimum internal The loudspeaker has built‑in protection to ensure that,
volume for extended low frequency performance. in the event of a fire, damage to the loudspeaker does
The loudspeaker utilizes a second order crossover not result in failure of the circuit to which it is
network at 3.3 kHz, with a comprehensive protection connected. In this way, system integrity is maintained;
circuit to protect the network, woofer, and tweeter ensuring loudspeakers in other areas can still be used
drivers from excessive power levels. to inform people of the situation. It is standard fitted
The loudspeaker can be installed optionally with the with a back‑can enclosure to increase protection of
LC2‑PC60G6‑10 ceiling subwoofer to enhance the low the cable termination.
frequency reproduction down to 45 Hz. The loudspeaker has an emergency compliant ceramic
screw‑terminal block and thermal fuse.
2. 2 | LC2‑PC30G6‑8 Premium‑sound Ceiling Loudspeaker 30W
Certifications and Approvals
All Bosch loudspeakers are designed to withstand
operating at their rated power for 100 continuous
hours in accordance with IEC 268‑5 Power Handling
Capacity (PHC) standards. Bosch has also developed
the Simulated Acoustical Feedback Exposure (SAFE)
test to demonstrate that they can withstand two times
their rated power for short durations. This ensures
improved reliability under extreme conditions, leading
to higher customer satisfaction, longer operating life,
and lessens the chance of failure or performance
deterioration.
Safety according to EN 60065
Emergency according to BS 5839‑8 / EN 60849
Region Certification
Europe CE
Installation/Configuration Notes
Mounting
The loudspeaker is secured in ceilings using four
integral toggle anchors, and has been designed to
work together in a wide range of different ceiling
constructions. A tile bridge / C‑ring is included for safe
suspension in a drop ceiling that uses mineral wool, or
other fiber‑based ceiling tiles from 4 to 25 mm (0.16
to 1.0 in.) thick. Bosch
A circular template for marking a 272 mm (10.75 in.)
diameter hole is included with the loudspeaker.
Dimensions in Inch / [mm]
Power setting
The unit has a three‑way emergency compliant ceramic -
0
1
terminal block with screw connections (including +
30W
2 3
earth) suitable for loop‑through wiring. Four 100 V, 15W
and five 70 V, primary taps are provided on the 4
matching transformer to allow selection of nominal 7.5W
full‑power, half‑power, quarter‑power, eighth‑power 3.75W
radiation (in 3 dB steps) and eight ohm. Selection is
1.88W (70 V)
done via a convenient switch on the front baffle.
Circuit diagram (1: Passive Limiter, 2: Low Pass Filter, 3:
High Pass Filter, 4: Thermal fuse)
1 3
4 5
2
1 SPL, 1W/1m (dB)
2 Frequency (Hz)
3. 3 | LC2‑PC30G6‑8 Premium‑sound Ceiling Loudspeaker 30W
3 Impedance (Ohms) Technical Specifications
4 Frequency Response, half space Electrical
5 Impedance Maximum power 75 W
Frequency response Rated power 30 / 15 / 7.5 / 3.75 W (1.88 W only,
360
70 V).
200 Sound pressure level 106 / 91 dB (SPL)
at 30 W / 1 W (1 kHz, 1 m)
100
1
Effective frequency range 50 Hz to 20 kHz
50
(-10 dB)
3
Coverage (conical) 110°
4
10 Rated voltage 70 V or 100 V
20 100 1000 10000 20000
2 Rated impedance 167 or 333 or 8 ohm
LF transducer 200 mm (8 in.) Polypropylene cone
1 -6dB Beamwidth (degrees)
HF transducer 25 mm (1 in.) Ti Mylar laminate
2 Frequency (Hz)
Connector 3‑pole ceramic screw terminal block
3 Horizontal
4 Vertical Mechanical
Beam width Diameter 300 mm (11.8 in)
Maximum depth 255 mm (10 in)
Ceiling thickness 4 to 25 mm (0.16 to 1.00 in.)
Mounting cut‑out 272 + 5 mm (10.75 + 0.20 in.)
1 3
Material
Baffle ABS (UL94V0)
Back‑can Zinc‑plated steel
2
Grille Powder coated steel
1 Directivity Index (DI), dB Weight 5 kg (11 lb)
2 Frequency (Hz) Color White (RAL 9010)
3 Directivity Factor (Q) Environmental
Directivity
Operating temperature -25 ºC to +55 ºC (-13 ºF to +131 ºF)
Parts Included
Storage temperature -40 ºC to +70 ºC (-40 ºF to +158 ºF)
Quantity Components Relative humidity <95%
1 LC2‑PC30G6‑8 Premium‑sound Ceiling Loudspeaker
Ordering Information
1 272 mm (10.75 in.) circular cut‑out template
LC2‑PC30G6‑8 Premium‑sound Ceiling Loudspeaker
1 Tile bridge / C‑ring 30W
1 Paint shield 30 W, 8‑inch two‑way loudspeaker (packing include 2
pieces)
1 Installation instruction Order number LC2-PC30G6-8