The document provides information on the Andrew WB-K210-B Safety Grated Waveguide Bridge Kit. The kit includes a 24 inch by 10 foot waveguide bridge channel, two 13 foot 4 inch direct burial posts, support brackets, and other hardware. It has a weight of 385 pounds and is made of hot dip galvanized steel. The kit allows for running of 24 cable runs and includes end caps.
The document contains specifications for various crucibles and boats made of pyrolytic boron nitride (PBN) that are used for crystal growth applications like OLED, MBE, VGF, and LEC. It lists the inner diameters, lip diameters, heights, lengths, thicknesses, and other parameters for different sized PBN crucibles, boats, plates, rings, and rods. The final section provides typical property values for PBN such as density, thermal conductivity, resistivity, and metal impurity content.
This document discusses different methods for holding workpieces on an engine lathe. It separates workpieces into categories based on their geometry - cylindrical, non-cylindrical, solid, hollow, tapered, straight, short, long, regular shaped, and irregular shaped. For each category, it describes the appropriate holding method, such as using a tapered mandrel for a hollow tapered cylindrical workpiece, a 3-jaw chuck for a short solid cylindrical workpiece, or mounting an irregular shaped workpiece on a plate fixture attached to a faceplate with a counterweight. The goal is to select the best holding method based on the geometric features of the specific workpiece.
XYZ Boat Supplies was created by experienced boaters and Coast Guard veterans to provide affordable boating products. They offer a line of electronics, hardware, and plastic goods for boats, including USB chargers, voltmeters, cleats, shackles, rod holders, cup holders, and nautical-themed wine glasses. Their products are designed and produced by those with extensive ocean experience.
This document contains product information from Ace Glass including compression adapters and spherical joint adapters. It lists various tube sizes and order codes for tube compression fittings that allow for attachment of flexible or rigid tubing in different configurations such as right angle, twin right angle, vertical and standard taper joints. The adapters provide a versatile connection for adapting tubing and supporting equipment.
Industrial Metal Supply stocks a large inventory of chromoly and DOM round tubing in various sizes and wall thicknesses. This tubing is commonly used for automotive suspension parts, roll bars, and roll cages. The document provides tables listing available sizes and wall thicknesses of chromoly and DOM tubing that can be ordered for delivery or pickup. Customers are also invited to visit one of the company's five store locations.
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
The document provides information on the Andrew WB-K210-B Safety Grated Waveguide Bridge Kit. The kit includes a 24 inch by 10 foot waveguide bridge channel, two 13 foot 4 inch direct burial posts, support brackets, and other hardware. It has a weight of 385 pounds and is made of hot dip galvanized steel. The kit allows for running of 24 cable runs and includes end caps.
The document contains specifications for various crucibles and boats made of pyrolytic boron nitride (PBN) that are used for crystal growth applications like OLED, MBE, VGF, and LEC. It lists the inner diameters, lip diameters, heights, lengths, thicknesses, and other parameters for different sized PBN crucibles, boats, plates, rings, and rods. The final section provides typical property values for PBN such as density, thermal conductivity, resistivity, and metal impurity content.
This document discusses different methods for holding workpieces on an engine lathe. It separates workpieces into categories based on their geometry - cylindrical, non-cylindrical, solid, hollow, tapered, straight, short, long, regular shaped, and irregular shaped. For each category, it describes the appropriate holding method, such as using a tapered mandrel for a hollow tapered cylindrical workpiece, a 3-jaw chuck for a short solid cylindrical workpiece, or mounting an irregular shaped workpiece on a plate fixture attached to a faceplate with a counterweight. The goal is to select the best holding method based on the geometric features of the specific workpiece.
XYZ Boat Supplies was created by experienced boaters and Coast Guard veterans to provide affordable boating products. They offer a line of electronics, hardware, and plastic goods for boats, including USB chargers, voltmeters, cleats, shackles, rod holders, cup holders, and nautical-themed wine glasses. Their products are designed and produced by those with extensive ocean experience.
This document contains product information from Ace Glass including compression adapters and spherical joint adapters. It lists various tube sizes and order codes for tube compression fittings that allow for attachment of flexible or rigid tubing in different configurations such as right angle, twin right angle, vertical and standard taper joints. The adapters provide a versatile connection for adapting tubing and supporting equipment.
Industrial Metal Supply stocks a large inventory of chromoly and DOM round tubing in various sizes and wall thicknesses. This tubing is commonly used for automotive suspension parts, roll bars, and roll cages. The document provides tables listing available sizes and wall thicknesses of chromoly and DOM tubing that can be ordered for delivery or pickup. Customers are also invited to visit one of the company's five store locations.
The document provides specifications for various FluoroNyliner linear guide components including:
- Pillow blocks, twin pillow blocks, shaft end support blocks, and mounting table tops for different size linear guides ranging from 0.375 to 1.5 inches in diameter.
- It lists the part numbers, dimensions, materials, weights, and other specifications for each component.
- It also includes an illustration of a double end supported linear guide system with pillow blocks, shafts, end supports, and a size B mounting table top.
The document lists and provides details of various window opener hardware products available from Coastal Group, including pole hooks, screw jack winding poles, screw jack openers in various sizes, and Lokkit window stays in different lengths and finishes. Contact information is provided for sales inquiries.
The document discusses various window restrictors and pivots made by Coastal Group, including surface fit window restrictors, cavity restrictors, detachable restrictors, and concealed brass pivot sets. The products are made of stainless steel or brass and have passed CE Marking load tests. Contact information is provided to inquire about sales or visit the company website.
This document provides information on sealing solutions and fire safety products from Coastal Group, including water bars, bubble seals, intumescent strips for fire and smoke protection in different sizes, colors and lengths. It lists product codes, descriptions, finishes and technical specifications. Contact details are provided at the top and bottom for sales and technical queries.
The document discusses different types of casement stays and fasteners for windows, including stainless steel options that are lockable, come with mortice plates, and are suitable for use with a 5mm weatherseal compression gap. It provides product codes, part numbers, descriptions, and finishes for casement fasteners, stays, hook plates, lockable pins, and wedge pattern fasteners. Contact information is given to call or fax the sales team for more details.
This document provides information on various sealing solutions including intumescent strips, threshold plates, drop down seals, and batwing seals. The strips and plates provide acoustic, fire and smoke protection in different sizes and finishes. Threshold plates and drop down seals are available in stainless steel to be used in joinery hardware. Batwing seals come in 12x12mm sections in varying lengths and colors to serve acoustic and smoke sealing purposes.
This document provides information on antique casement stays and fasteners including bulb end window handles and casement stays. It lists various part numbers, descriptions, finishes, and sizes for the products. The finishes included are dull black, oil rubbed bronze, and antique pewter which are achieved through different casting and coating processes. It recommends periodic wiping with oil to preserve the appearance of the products, which are suitable for both internal and external use.
This document provides a list of antique casement stays, fasteners, and handles. It includes the part number, description, and finish for various curly tail window espagnolette handles, bulb end casement fasteners, and a locking pin for a casement stay. Contact and ordering information is provided for Coastal Group.
The document discusses Tempo weatherseals, which are made of closed cell micro foam that provides advantages like preventing water absorption and ensuring an aesthetic look without waves. The weatherseals have a high tolerance and acoustic value. They are UV and ozone resistant and can work in temperatures from -40C to +120C. An SPVT cutting tool allows for high speed installation of the weatherseals. The document provides product codes and descriptions for the weatherseals and cutting tool.
introducción ala entrega de trabajos escritosdanieltejedor19
Este documento proporciona información sobre la entrega de trabajos escritos de acuerdo con las normas Icontec. Explica las partes de un trabajo escrito como la introducción, capítulos, conclusiones y referencias. También define términos como márgenes, sangría, objetivos generales y específicos, y conclusiones. Por último, indica que se debe usar una sangría de 1.5 cm entre párrafos sin dejar líneas vacías.
A coworker at Village Green Montessori, Dawn Mitchell, sent a nice note to Bob Sheinin. Bob Sheinin is a retired educator and administrator from Niles Township High Schools District 219. The document provides brief details about a note that was sent between two individuals who work in education.
El documento habla sobre dos tipos de contaminación: contaminación del suelo y contaminación sónica. La contaminación del suelo puede producirse por ruptura de tanques de almacenamiento subterráneo, aplicación de pesticidas, o acumulación directa de productos industriales. Sus causas incluyen el uso de plaguicidas en la agricultura, derrames de petróleo, actividades mineras, erosión por deforestación, e incendios forestales. La contaminación sónica se refiere al exceso de sonido que altera el ambiente, y puede
Este documento describe los diferentes tipos de riesgos en el lugar de trabajo, incluyendo riesgos de incendio y explosión, riesgos físicos, químicos y biológicos. La higiene industrial tiene como objetivo principal proteger el bienestar de los trabajadores mediante el estudio y modificación del ambiente laboral para prevenir enfermedades ocupacionales.
Las losas postensadas consisten en losas de concreto que son tensadas después de fraguar mediante cables de acero dispuestos en un patrón parabólico. Esto comprime la losa y balancea las cargas hacia el centro. Este sistema permite mayores luces, plantas libres y estructuras más delgadas al eliminar las vigas estáticas. Las losas postensadas también aceleran la construcción, ahorran materiales, mejoran la integridad estructural y permiten uniones más sencillas entre elementos estructurales.
The document lists and provides details of various window opener hardware products available from Coastal Group, including pole hooks, screw jack winding poles, screw jack openers in various sizes, and Lokkit window stays in different lengths and finishes. Contact information is provided for sales inquiries.
The document discusses various window restrictors and pivots made by Coastal Group, including surface fit window restrictors, cavity restrictors, detachable restrictors, and concealed brass pivot sets. The products are made of stainless steel or brass and have passed CE Marking load tests. Contact information is provided to inquire about sales or visit the company website.
This document provides information on sealing solutions and fire safety products from Coastal Group, including water bars, bubble seals, intumescent strips for fire and smoke protection in different sizes, colors and lengths. It lists product codes, descriptions, finishes and technical specifications. Contact details are provided at the top and bottom for sales and technical queries.
The document discusses different types of casement stays and fasteners for windows, including stainless steel options that are lockable, come with mortice plates, and are suitable for use with a 5mm weatherseal compression gap. It provides product codes, part numbers, descriptions, and finishes for casement fasteners, stays, hook plates, lockable pins, and wedge pattern fasteners. Contact information is given to call or fax the sales team for more details.
This document provides information on various sealing solutions including intumescent strips, threshold plates, drop down seals, and batwing seals. The strips and plates provide acoustic, fire and smoke protection in different sizes and finishes. Threshold plates and drop down seals are available in stainless steel to be used in joinery hardware. Batwing seals come in 12x12mm sections in varying lengths and colors to serve acoustic and smoke sealing purposes.
This document provides information on antique casement stays and fasteners including bulb end window handles and casement stays. It lists various part numbers, descriptions, finishes, and sizes for the products. The finishes included are dull black, oil rubbed bronze, and antique pewter which are achieved through different casting and coating processes. It recommends periodic wiping with oil to preserve the appearance of the products, which are suitable for both internal and external use.
This document provides a list of antique casement stays, fasteners, and handles. It includes the part number, description, and finish for various curly tail window espagnolette handles, bulb end casement fasteners, and a locking pin for a casement stay. Contact and ordering information is provided for Coastal Group.
The document discusses Tempo weatherseals, which are made of closed cell micro foam that provides advantages like preventing water absorption and ensuring an aesthetic look without waves. The weatherseals have a high tolerance and acoustic value. They are UV and ozone resistant and can work in temperatures from -40C to +120C. An SPVT cutting tool allows for high speed installation of the weatherseals. The document provides product codes and descriptions for the weatherseals and cutting tool.
introducción ala entrega de trabajos escritosdanieltejedor19
Este documento proporciona información sobre la entrega de trabajos escritos de acuerdo con las normas Icontec. Explica las partes de un trabajo escrito como la introducción, capítulos, conclusiones y referencias. También define términos como márgenes, sangría, objetivos generales y específicos, y conclusiones. Por último, indica que se debe usar una sangría de 1.5 cm entre párrafos sin dejar líneas vacías.
A coworker at Village Green Montessori, Dawn Mitchell, sent a nice note to Bob Sheinin. Bob Sheinin is a retired educator and administrator from Niles Township High Schools District 219. The document provides brief details about a note that was sent between two individuals who work in education.
El documento habla sobre dos tipos de contaminación: contaminación del suelo y contaminación sónica. La contaminación del suelo puede producirse por ruptura de tanques de almacenamiento subterráneo, aplicación de pesticidas, o acumulación directa de productos industriales. Sus causas incluyen el uso de plaguicidas en la agricultura, derrames de petróleo, actividades mineras, erosión por deforestación, e incendios forestales. La contaminación sónica se refiere al exceso de sonido que altera el ambiente, y puede
Este documento describe los diferentes tipos de riesgos en el lugar de trabajo, incluyendo riesgos de incendio y explosión, riesgos físicos, químicos y biológicos. La higiene industrial tiene como objetivo principal proteger el bienestar de los trabajadores mediante el estudio y modificación del ambiente laboral para prevenir enfermedades ocupacionales.
Las losas postensadas consisten en losas de concreto que son tensadas después de fraguar mediante cables de acero dispuestos en un patrón parabólico. Esto comprime la losa y balancea las cargas hacia el centro. Este sistema permite mayores luces, plantas libres y estructuras más delgadas al eliminar las vigas estáticas. Las losas postensadas también aceleran la construcción, ahorran materiales, mejoran la integridad estructural y permiten uniones más sencillas entre elementos estructurales.
1. Connecting Craftsmanship With Solutions
Email sales@coastal-group.com Visit www.coastal-group.com
Call our Sales Team on 01726 871726 | Fax 01726 871731
Part No Description Finish
RCIL-SS Cavity Restrictor - LH SS
RCIR-SS Cavity Restrictor - RH SS
SC1 13mm Locator Pin SS
Restrictors & pivots
Connecting Craftsmanship with Solutions
Email sales@coastal-group.com Visit www.coastal-group.com
Connecting Craftsmanship with Solutions
Email sales@coastal-group.com Visit www.coastal-group.com
Surface Fit Window Restrictor
RS10-WH Non Locking Window Restrictor WH
RS10-BR Non Locking Window Restrictor BR
Finish
Description
Code
Finish
Description
Code
87
40.1
105.1
9
18.6
98
50
22
13
6
139.7
15.5
Euro Groove Restrictor
Detachable Restrictor
• Spring loaded
• Stainless Steel
• CE Marking (BSEN 14351) Load-Bearing capacity of safety devices.
This product has been tested to exceed requirements.
• CE Marking (BSEN 14351) Load-Bearing capacity of safety devices.
This product has been tested to exceed requirements.
• CE Marking (BSEN 14351) Load-Bearing capacity of safety devices.
This product has been tested to exceed requirements.
Part No Description Finish
SDR4 Detachable Restrictor 4” SS
SDR6 Detachable Restrictor 6” SS
SDR8 Detachable Restrictor 8” SS
SDR10 Detachable Restrictor 10” SS
RS3K-SS Key for Cavity Restrictor SS
Finish
Description
Code
Concealed Brass Pivot Set
sp65-sb 64 x 25mm Sash Window Pivot Set (4 Pieces per set) SB
Finish
Description
Code
14
• Solid Brass
• Stainless Steel
• Left Hand Shown
34.0
16.0