This document provides step-by-step instructions for disassembling and assembling a CLAAS CERES 316 326 336 346 2+4WD tractor engine. It outlines 57 steps to fully disassemble the engine, removing components like the fan, pulleys, pumps, heads, crankshaft and more. Reassembly is to be done in reverse order, ensuring proper cleaning, lubrication and torque specifications are followed. Special attention is given to engine timing components and seals.
The document provides instructions for servicing components of an excavator engine, including disassembling and assembling the exhaust manifold, fuel transfer pump, governor, and other parts. The multi-step instructions describe removing and installing components like bolts, gaskets, valves, springs, and housings. Photos supplement the text instructions to aid with the servicing process.
Komatsu d31 px 21 bulldozer service repair manual sn 50501 and upudfjjsjekkdmm
This document provides removal and installation instructions for various components of a Komatsu excavator, including the fuel injection pump assembly, cylinder head assembly, and other engine parts. It lists over 40 steps for removing parts, identifies any special tools needed, and notes torque specifications and other details for reinstallation. Key components discussed include the fuel injection pump, cylinder head, turbocharger, exhaust manifold, nozzle holders, rocker arm assembly, and various hoses and wiring.
Massey ferguson mf 1250 compact tractor ( e50101, hst non hst) parts catalo...fjjfyjsekdmme
This document contains parts lists and technical specifications for engine components of a Massey Ferguson 1250 compact tractor, including the cylinder head, cylinder block, timing gear housing, rocker shaft, valves, and other parts. It provides part numbers, descriptions, quantities, and notes on serial number ranges for different part variations. The parts lists include exploded diagrams identifying each individual part referenced in the specifications tables.
This document provides parts information for a Massey Ferguson MF 1250 compact tractor, including diagrams and lists of parts. It includes sections on the cylinder head, cylinder head cover, inlet manifold, exhaust manifold, cylinder block, cylinder block rear seal and plate, crankcase, timing gear housing, rocker shaft and valves. Each section includes an illustration, item numbers, part numbers, quantities and part descriptions.
Massey ferguson mf 1240 compact tractor ( e40101 - hst non hst) parts catal...fjjfyjsekdmme
The document contains parts lists and diagrams for an MF 1240 compact tractor engine. It lists over 50 individual engine parts, including pistons, rings, valves, gaskets, bolts, and other components. Each part is identified by number and includes the part name, number of parts, and any relevant part number or specification information. Diagrams are referenced for additional details on part locations and assembly.
This document provides parts information for a Massey Ferguson MF 1235 compact tractor. It includes detailed lists and diagrams of engine parts, identifying each part by number, quantity, description, and other specifications. The parts covered include the cylinder head, cylinder head cover, cylinder block, inlet manifold, exhaust manifold, crankcase, timing gear housing, and rocker shaft and valves.
This document provides part numbers and descriptions for components of a Massey Ferguson MF 1230 compact tractor engine. It includes listings for the cylinder head, cylinder head cover, inlet manifold, exhaust manifold, cylinder block, cylinder block rear plate, crankcase oil sump, and other related parts. Precise part numbers are provided for components, along with quantities and additional details. The document appears to be pages from a service or parts manual for repair and maintenance of the tractor engine.
Massey ferguson mf 1225 tractor parts catalogue manualfjjfyjsekdmme
The document provides parts information for repairing the engine of a Massey Ferguson MF 1225 tractor. It contains multiple pages detailing individual engine components, including the cylinder head, intake manifold, camshaft, timing gear housing, oil sump, cylinder block, and rocker arm. Each component section lists the relevant part numbers, quantities, and descriptions. The document aims to provide technicians all necessary specifications and replacements for engine repairs.
The document provides instructions for servicing components of an excavator engine, including disassembling and assembling the exhaust manifold, fuel transfer pump, governor, and other parts. The multi-step instructions describe removing and installing components like bolts, gaskets, valves, springs, and housings. Photos supplement the text instructions to aid with the servicing process.
Komatsu d31 px 21 bulldozer service repair manual sn 50501 and upudfjjsjekkdmm
This document provides removal and installation instructions for various components of a Komatsu excavator, including the fuel injection pump assembly, cylinder head assembly, and other engine parts. It lists over 40 steps for removing parts, identifies any special tools needed, and notes torque specifications and other details for reinstallation. Key components discussed include the fuel injection pump, cylinder head, turbocharger, exhaust manifold, nozzle holders, rocker arm assembly, and various hoses and wiring.
Massey ferguson mf 1250 compact tractor ( e50101, hst non hst) parts catalo...fjjfyjsekdmme
This document contains parts lists and technical specifications for engine components of a Massey Ferguson 1250 compact tractor, including the cylinder head, cylinder block, timing gear housing, rocker shaft, valves, and other parts. It provides part numbers, descriptions, quantities, and notes on serial number ranges for different part variations. The parts lists include exploded diagrams identifying each individual part referenced in the specifications tables.
This document provides parts information for a Massey Ferguson MF 1250 compact tractor, including diagrams and lists of parts. It includes sections on the cylinder head, cylinder head cover, inlet manifold, exhaust manifold, cylinder block, cylinder block rear seal and plate, crankcase, timing gear housing, rocker shaft and valves. Each section includes an illustration, item numbers, part numbers, quantities and part descriptions.
Massey ferguson mf 1240 compact tractor ( e40101 - hst non hst) parts catal...fjjfyjsekdmme
The document contains parts lists and diagrams for an MF 1240 compact tractor engine. It lists over 50 individual engine parts, including pistons, rings, valves, gaskets, bolts, and other components. Each part is identified by number and includes the part name, number of parts, and any relevant part number or specification information. Diagrams are referenced for additional details on part locations and assembly.
This document provides parts information for a Massey Ferguson MF 1235 compact tractor. It includes detailed lists and diagrams of engine parts, identifying each part by number, quantity, description, and other specifications. The parts covered include the cylinder head, cylinder head cover, cylinder block, inlet manifold, exhaust manifold, crankcase, timing gear housing, and rocker shaft and valves.
This document provides part numbers and descriptions for components of a Massey Ferguson MF 1230 compact tractor engine. It includes listings for the cylinder head, cylinder head cover, inlet manifold, exhaust manifold, cylinder block, cylinder block rear plate, crankcase oil sump, and other related parts. Precise part numbers are provided for components, along with quantities and additional details. The document appears to be pages from a service or parts manual for repair and maintenance of the tractor engine.
Massey ferguson mf 1225 tractor parts catalogue manualfjjfyjsekdmme
The document provides parts information for repairing the engine of a Massey Ferguson MF 1225 tractor. It contains multiple pages detailing individual engine components, including the cylinder head, intake manifold, camshaft, timing gear housing, oil sump, cylinder block, and rocker arm. Each component section lists the relevant part numbers, quantities, and descriptions. The document aims to provide technicians all necessary specifications and replacements for engine repairs.
Massey ferguson mf 1220 compact tractor parts catalogue manualfjjfyjsekdmme
This document provides part numbers and descriptions for engine components of a Massey Ferguson MF 1220 compact tractor. It includes sections for the engine hanger, cylinder head, cylinder head cover, intake manifold, exhaust manifold, cylinder block, timing gear housing, rocker arm, and other internal engine parts. Over 50 individual parts are listed along with quantities and identifying information.
Massey ferguson mf 1215 compact tractor (mechanical) parts catalogue manualfjjfyjsekdmme
This document provides parts information for the engine of a Massey Ferguson 1215 compact tractor, including diagrams and lists of parts for the engine block, cylinder head, timing gear housing, oil sump, and other engine components. It includes the part numbers, quantities, descriptions, and any relevant part number changes or comments for over 50 individual engine parts.
This document provides parts information for the engine of a Massey Ferguson 1210 compact tractor. It contains diagrams and lists of parts, including the cylinder head, intake manifold, camshaft, timing gear housing, cylinder block, oil sump, rocker arm, and other engine components. For each part, the number, quantity, description, and any relevant comments are provided.
Massey ferguson mf 1205 compact tractor (mechanical) parts catalogue manualfjjfyjsekdmme
This document provides parts information for the engine of a Massey Ferguson 1205 compact tractor, including diagrams and lists of parts with descriptions and part numbers. It covers components such as the cylinder head, cylinder head cover, inlet manifold, exhaust manifold, cylinder block, cylinder block rear plate, and crankcase. Over 50 individual parts are detailed.
Massey ferguson mf 835 combines parts catalogue manualfjjfyjsekdmme
The document provides parts information for Massey Ferguson MF 830/835 combines. It includes detailed lists of parts for various engine systems like the cylinder block, flywheel housing, crankshaft, cylinder head, and more. Each part is accompanied by additional details like part numbers, quantities, descriptions, and any replacement or repair information.
Massey ferguson mf 830 combines parts catalogue manualfjjfyjsekdmme
The document provides parts information for Massey Ferguson MF 830/835 combines. It includes detailed lists of parts for various engine systems like the cylinder block, flywheel housing, crankshaft, cylinder head, and more. Each part is listed with its number, quantity, description, and any relevant comments.
Massey ferguson mf 815 combines parts catalogue manualfjjfyjsekdmme
The document contains parts lists and technical specifications for Massey Ferguson MF 810/815 combines. It includes lists of parts for the engine, cylinder block, flywheel housing, crankshaft, pistons, cylinder head and other components. The parts are identified by part number, quantity, description and comments noting replacements or specifications.
Massey ferguson mf 810 combines parts catalogue manualfjjfyjsekdmme
The document contains parts lists and technical specifications for Massey Ferguson MF 810/815 combines. It includes lists of parts for the engine, cylinder block, flywheel housing, crankshaft, pistons, cylinder head and other components. The parts are identified by part number, quantity, description and comments noting replacements or specifications.
Komatsu pc200 lc 6 excavator service repair manual sna80001 and upfjjfyjsekdmme
This document is a shop manual for Komatsu excavators providing technical information for maintenance and repair work. It includes sections on general safety procedures, the structure and function of components, testing and adjustment procedures, disassembly and assembly instructions, and maintenance standards for parts. The manual is intended to help technicians safely and effectively service the excavators by providing accurate technical information.
Komatsu pc200 6 excavator service repair manual sn a80001 and upfjjfyjsekdmme
This document is a shop manual for Komatsu excavators providing technical information for maintenance and repair work. It covers machine models PC200-6, PC200LC-6, PC210LC-6, PC220LC-6, and PC250LC-6 with serial numbers A80001 and higher. The manual contains sections on general information, structure and function, testing and adjustment, disassembly and assembly, and maintenance standards. Safety precautions are emphasized throughout, with warnings to take necessary actions to ensure worker safety.
Komatsu pc45 mrx 1 excavator service repair manual sn1001 and upfjjfyjsekdmme
1. The document provides instructions for removing and installing starting motors, alternators, fuel injection pumps, nozzle holders, and water pumps on various excavator models.
2. Key steps include disconnecting battery cables, removing covers and brackets, disconnecting electrical connectors and fluid lines, and loosening and removing mounting hardware.
3. Reinstallation is done in the reverse order, taking care to align parts properly and tighten fasteners to the specified torques.
Komatsu pc40 mrx 1 excavator service repair manual sn1001 and upfjjfyjsekdmme
The document provides instructions for removing and installing starting motors, alternators, fuel injection pumps, nozzle holders, and water pumps on excavators. Key steps include disconnecting battery cables, removing covers and brackets, disconnecting electrical connectors and fluid lines, and loosening and removing mounting hardware. Installation is the reverse of removal, ensuring proper alignment of marks and tightening of fasteners to the specified torques.
Komatsu pc35 mrx 1 excavator service repair manual sn3930 and upfjjfyjsekdmme
1. The document provides instructions for removing and installing starting motors, alternators, fuel injection pumps, nozzle holders, and water pumps on various excavator models.
2. Key steps include disconnecting battery cables, removing covers and brackets, disconnecting electrical connectors and fluid lines, and loosening and removing mounting hardware.
3. Reinstallation is done in the reverse order, taking care to align parts properly and tighten fasteners to the specified torques.
Komatsu pc30 mrx 1 excavator service repair manual sn10001 and upfjjfyjsekdmme
1. The document provides instructions for removing and installing various starting motor, alternator, fuel injection pump, nozzle holder, water pump, thermostat, engine front seal, and engine rear seal assemblies on Komatsu PC27-45MRX excavators.
2. Key steps include disconnecting battery cables, removing mounting bolts and brackets, disconnecting electrical connectors and fluid lines, and noting proper tightening specifications.
3. Reinstallation is the reverse of the removal process, and instructions emphasize adjusting belt tension and refilling fluids as needed.
Komatsu pc27 mrx 1 excavator service repair manual sn11574 and upfjjfyjsekdmme
1. The document provides instructions for removing and installing various starting motor, alternator, fuel injection pump, nozzle holder, water pump, thermostat, engine front seal, and engine rear seal assemblies on Komatsu PC27-45MRX excavators.
2. Key steps include disconnecting battery cables, removing mounting bolts and brackets, disconnecting electrical connectors and fluid lines, and noting proper tightening specifications.
3. Reinstallation is the reverse of the removal process, and instructions emphasize adjusting belt tension and refilling fluids as needed.
Komatsu pc15 r 8 hydraulic excavator service repair manual sn 10001 and upfjjfyjsekdmme
This shop manual provides instructions for repairing and maintaining Komatsu PC12R-8 and PC15R-8 excavators. It begins with safety precautions and general information. The manual is then divided into sections covering the excavators' structure and function, testing and adjusting procedures, disassembly and assembly instructions, and maintenance standards. It also references the separate shop manual for the 3D68E-3 engine used in these models.
Komatsu pc12 r 8 hydraulic excavator service repair manual sn 10001 and upfjjfyjsekdmme
This shop manual provides instructions for repairing and maintaining Komatsu PC12R-8 and PC15R-8 excavators. It begins with safety precautions and general information. The manual is then divided into sections covering the excavators' structure and function, testing and adjusting procedures, disassembly and assembly instructions, and maintenance standards. Technicians should carefully follow the procedures in this manual to safely and effectively service these excavator models.
Komatsu h285 s hydraulic shovel service repair manual (sn 78067)fjjfyjsekdmme
This shop manual provides proprietary information for maintaining Komatsu hydraulic shovel serial number H285S 78067. The manual notes that Komatsu reserves the right to continuously improve and update their products, so customers should check with their distributor for the latest revision. It also warns that the contents are confidential and not to be reproduced or shared without written permission from Komatsu.
Komatsu h185 s mining shovel service repair manual (sn 06108)fjjfyjsekdmme
The document is an operation and maintenance manual for a Komatsu H185S mining shovel with serial number H185S 06108. It contains three parts, including an operation manual, lubrication and maintenance manual, and electrical and hydraulic diagrams. The manual was published by Komatsu America Corp. in February 2005 and is proprietary information not to be reproduced without permission. Komatsu reserves the right to make changes to its products and this publication without notice. Customers are advised to contact their distributor for the latest revision.
Komatsu 12 v170 2 series engine service repair manualfjjfyjsekdmme
This document provides safety guidelines and precautions for servicing Komatsu machines. It emphasizes the importance of safety during all repair and maintenance work. Specific safety tips are provided, such as wearing protective equipment, properly supporting machines, and following instructions for high pressure components. Workers are advised to thoroughly read the operation manual, clearly communicate procedures, and keep work areas clean and organized.
SATTA MATKA | DPBOSS | KALYAN MAIN BAZAR | FAST MATKA RESULT KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA
MATKA NUMBER FIX MATKANUMBER FIX SATTAMATKA FIXMATKANUMBER SATTA MATKA ALL SATTA MATKA FREE GAME KALYAN MATKA TIPS KAPIL MATKA GAME SATTA MATKA KALYAN GAME DAILY FREE 4 ANK ALL MARKET PUBLIC SEVA WEBSITE FIX FIX MATKA NUMBER INDIA.S NO1 WEBSITE TTA FIX FIX FIX MATKA GURU INDIA MATKA KALYAN CHART MATKA GUESSING KALYAN FIX OPEN FINAL 3 ANK SATTAMATKA143 GUESSING SATTA BATTA MATKA FIX NUMBER TODAY WAPKA FIX AAPKA FIX FIX FIX FIX SATTA GURU NUMBER SATTA MATKA MATKA143 SATTA SATTA SATTA MATKA SATTAMATKA1438 FIX MATKA MATKA BOSS SATTA LIVE 3MATKA 143 FIX FIX FIX KALYAN JODI MATKA KALYAN FIX FIX WAP MATKA BOSS440 SATTA MATKA FIX FIX MATKA NUMBER SATTA MATKA FIXMATKANUMBER FIX MATKA MATKA RESULT FIX MATKA NUMBER FREE DAILY FIX MATKA NUMBER FIX FIX MATKA JODI SATTA MATKA FIX ANK MATKA ANK FIX KALYAN MUMBAI MATKA NUMBER FIXMATKANUMBER SATTA NUMBER FAST MATKA RESULT SATTA BATTA INDIAN SATTA SATTA RESULT MADHUR SATTA PRABHAT SATTA FIX FIX FIX SATTA NUMBER SATTAKING143 GUESSING SATTA CHART KALYAN PENAL CHART MATKA420 SATTA GUESSING NUMBER KALYAN NIGHT CHART SATTA FIX FIX FIX SATTA NUMBER FIX FIX FIX OPEN FIX FIX WAPKA MATKA DPBOSS FIX FIX 3ANK MATKA KALYAN CHART MATKA GUESSING TARA MATKA FIX FIXMATKANUMBER FINAL ANK MATKABOSS DUBAI SATTA MATKA GOLDEN MATKA FIX FIX MATKA NUMBER FIX MATKANUMBER FIX FIX FIX MATKA NUMBER FIX MATKANUMBER FIX SATTAMATKA FIXMATKANUMBER SATTA MATKA ALL SATTA MATKA FREE GAME KALYAN MATKA TIPS KAPIL MATKA GAME SATTA MATKA KALYAN GAME DAILY FREE 4 ANK ALL MARKET PUBLIC SEVA SATTA FIX FIX FIX MATKA GURU INDIA MATKA KALYAN CHART MATKA GUESSING KALYAN FIX OPEN FINAL 3 ANK SATTAMATKA143 GUESSING SATTA BATTA MATKA FIX NUMBER TODAY WAPKA FIX AAPKA FIX FIX FIX FIX SATTA GURU NUMBER SATTA MATKA MATKA143 SATTA SATTA SATTA MATKA SATTAMATKA1438 FIX MATKA MATKA BOSS SATTA LIVE 3MATKA 143 FIX FIX FIX KALYAN JODI MATKA KALYAN FIX FIX WAP MATKA BOSS440 SATTA MATKA FIX FIX MATKA NUMBER SATTA MATKA FIXMATKANUMBER FIX MATKA MATKA RESULT FIX MATKA NUMBER FREE DAILY FIX MATKA NUMBER FIX FIX MATKA JODI SATTA MATKA FIX ANK MATKA ANK FIX KALYAN MUMBAI MATKA NUMBER FIXMATKANUMBER SATTA NUMBER FAST MATKA RESULT SATTA BATTA INDIAN SATTA SATTA RESULT MADHUR SATTA PRABHAT SATTA FIX FIX FIX SATTA NUMBER SATTAKING143 GUESSING SATTA CHART KALYAN PENAL CHART MATKA420 SATTA GUESSING NUMBER KALYAN NIGHT CHART SATTA FIX FIX FIX SATTA NUMBER FIX FIX FIX OPEN FIX FIX WAPKA MATKA DPBOSS FIX FIX 3ANK MATKA KALYAN CHART MATKA GUESSING TARA MATKA FIX FIXMATKANUMBER FINAL ANK MATKABOSS DUBAI SATTA MATKA GOLDEN MATKA WAPKA.FIX FIX FIX
Massey ferguson mf 1220 compact tractor parts catalogue manualfjjfyjsekdmme
This document provides part numbers and descriptions for engine components of a Massey Ferguson MF 1220 compact tractor. It includes sections for the engine hanger, cylinder head, cylinder head cover, intake manifold, exhaust manifold, cylinder block, timing gear housing, rocker arm, and other internal engine parts. Over 50 individual parts are listed along with quantities and identifying information.
Massey ferguson mf 1215 compact tractor (mechanical) parts catalogue manualfjjfyjsekdmme
This document provides parts information for the engine of a Massey Ferguson 1215 compact tractor, including diagrams and lists of parts for the engine block, cylinder head, timing gear housing, oil sump, and other engine components. It includes the part numbers, quantities, descriptions, and any relevant part number changes or comments for over 50 individual engine parts.
This document provides parts information for the engine of a Massey Ferguson 1210 compact tractor. It contains diagrams and lists of parts, including the cylinder head, intake manifold, camshaft, timing gear housing, cylinder block, oil sump, rocker arm, and other engine components. For each part, the number, quantity, description, and any relevant comments are provided.
Massey ferguson mf 1205 compact tractor (mechanical) parts catalogue manualfjjfyjsekdmme
This document provides parts information for the engine of a Massey Ferguson 1205 compact tractor, including diagrams and lists of parts with descriptions and part numbers. It covers components such as the cylinder head, cylinder head cover, inlet manifold, exhaust manifold, cylinder block, cylinder block rear plate, and crankcase. Over 50 individual parts are detailed.
Massey ferguson mf 835 combines parts catalogue manualfjjfyjsekdmme
The document provides parts information for Massey Ferguson MF 830/835 combines. It includes detailed lists of parts for various engine systems like the cylinder block, flywheel housing, crankshaft, cylinder head, and more. Each part is accompanied by additional details like part numbers, quantities, descriptions, and any replacement or repair information.
Massey ferguson mf 830 combines parts catalogue manualfjjfyjsekdmme
The document provides parts information for Massey Ferguson MF 830/835 combines. It includes detailed lists of parts for various engine systems like the cylinder block, flywheel housing, crankshaft, cylinder head, and more. Each part is listed with its number, quantity, description, and any relevant comments.
Massey ferguson mf 815 combines parts catalogue manualfjjfyjsekdmme
The document contains parts lists and technical specifications for Massey Ferguson MF 810/815 combines. It includes lists of parts for the engine, cylinder block, flywheel housing, crankshaft, pistons, cylinder head and other components. The parts are identified by part number, quantity, description and comments noting replacements or specifications.
Massey ferguson mf 810 combines parts catalogue manualfjjfyjsekdmme
The document contains parts lists and technical specifications for Massey Ferguson MF 810/815 combines. It includes lists of parts for the engine, cylinder block, flywheel housing, crankshaft, pistons, cylinder head and other components. The parts are identified by part number, quantity, description and comments noting replacements or specifications.
Komatsu pc200 lc 6 excavator service repair manual sna80001 and upfjjfyjsekdmme
This document is a shop manual for Komatsu excavators providing technical information for maintenance and repair work. It includes sections on general safety procedures, the structure and function of components, testing and adjustment procedures, disassembly and assembly instructions, and maintenance standards for parts. The manual is intended to help technicians safely and effectively service the excavators by providing accurate technical information.
Komatsu pc200 6 excavator service repair manual sn a80001 and upfjjfyjsekdmme
This document is a shop manual for Komatsu excavators providing technical information for maintenance and repair work. It covers machine models PC200-6, PC200LC-6, PC210LC-6, PC220LC-6, and PC250LC-6 with serial numbers A80001 and higher. The manual contains sections on general information, structure and function, testing and adjustment, disassembly and assembly, and maintenance standards. Safety precautions are emphasized throughout, with warnings to take necessary actions to ensure worker safety.
Komatsu pc45 mrx 1 excavator service repair manual sn1001 and upfjjfyjsekdmme
1. The document provides instructions for removing and installing starting motors, alternators, fuel injection pumps, nozzle holders, and water pumps on various excavator models.
2. Key steps include disconnecting battery cables, removing covers and brackets, disconnecting electrical connectors and fluid lines, and loosening and removing mounting hardware.
3. Reinstallation is done in the reverse order, taking care to align parts properly and tighten fasteners to the specified torques.
Komatsu pc40 mrx 1 excavator service repair manual sn1001 and upfjjfyjsekdmme
The document provides instructions for removing and installing starting motors, alternators, fuel injection pumps, nozzle holders, and water pumps on excavators. Key steps include disconnecting battery cables, removing covers and brackets, disconnecting electrical connectors and fluid lines, and loosening and removing mounting hardware. Installation is the reverse of removal, ensuring proper alignment of marks and tightening of fasteners to the specified torques.
Komatsu pc35 mrx 1 excavator service repair manual sn3930 and upfjjfyjsekdmme
1. The document provides instructions for removing and installing starting motors, alternators, fuel injection pumps, nozzle holders, and water pumps on various excavator models.
2. Key steps include disconnecting battery cables, removing covers and brackets, disconnecting electrical connectors and fluid lines, and loosening and removing mounting hardware.
3. Reinstallation is done in the reverse order, taking care to align parts properly and tighten fasteners to the specified torques.
Komatsu pc30 mrx 1 excavator service repair manual sn10001 and upfjjfyjsekdmme
1. The document provides instructions for removing and installing various starting motor, alternator, fuel injection pump, nozzle holder, water pump, thermostat, engine front seal, and engine rear seal assemblies on Komatsu PC27-45MRX excavators.
2. Key steps include disconnecting battery cables, removing mounting bolts and brackets, disconnecting electrical connectors and fluid lines, and noting proper tightening specifications.
3. Reinstallation is the reverse of the removal process, and instructions emphasize adjusting belt tension and refilling fluids as needed.
Komatsu pc27 mrx 1 excavator service repair manual sn11574 and upfjjfyjsekdmme
1. The document provides instructions for removing and installing various starting motor, alternator, fuel injection pump, nozzle holder, water pump, thermostat, engine front seal, and engine rear seal assemblies on Komatsu PC27-45MRX excavators.
2. Key steps include disconnecting battery cables, removing mounting bolts and brackets, disconnecting electrical connectors and fluid lines, and noting proper tightening specifications.
3. Reinstallation is the reverse of the removal process, and instructions emphasize adjusting belt tension and refilling fluids as needed.
Komatsu pc15 r 8 hydraulic excavator service repair manual sn 10001 and upfjjfyjsekdmme
This shop manual provides instructions for repairing and maintaining Komatsu PC12R-8 and PC15R-8 excavators. It begins with safety precautions and general information. The manual is then divided into sections covering the excavators' structure and function, testing and adjusting procedures, disassembly and assembly instructions, and maintenance standards. It also references the separate shop manual for the 3D68E-3 engine used in these models.
Komatsu pc12 r 8 hydraulic excavator service repair manual sn 10001 and upfjjfyjsekdmme
This shop manual provides instructions for repairing and maintaining Komatsu PC12R-8 and PC15R-8 excavators. It begins with safety precautions and general information. The manual is then divided into sections covering the excavators' structure and function, testing and adjusting procedures, disassembly and assembly instructions, and maintenance standards. Technicians should carefully follow the procedures in this manual to safely and effectively service these excavator models.
Komatsu h285 s hydraulic shovel service repair manual (sn 78067)fjjfyjsekdmme
This shop manual provides proprietary information for maintaining Komatsu hydraulic shovel serial number H285S 78067. The manual notes that Komatsu reserves the right to continuously improve and update their products, so customers should check with their distributor for the latest revision. It also warns that the contents are confidential and not to be reproduced or shared without written permission from Komatsu.
Komatsu h185 s mining shovel service repair manual (sn 06108)fjjfyjsekdmme
The document is an operation and maintenance manual for a Komatsu H185S mining shovel with serial number H185S 06108. It contains three parts, including an operation manual, lubrication and maintenance manual, and electrical and hydraulic diagrams. The manual was published by Komatsu America Corp. in February 2005 and is proprietary information not to be reproduced without permission. Komatsu reserves the right to make changes to its products and this publication without notice. Customers are advised to contact their distributor for the latest revision.
Komatsu 12 v170 2 series engine service repair manualfjjfyjsekdmme
This document provides safety guidelines and precautions for servicing Komatsu machines. It emphasizes the importance of safety during all repair and maintenance work. Specific safety tips are provided, such as wearing protective equipment, properly supporting machines, and following instructions for high pressure components. Workers are advised to thoroughly read the operation manual, clearly communicate procedures, and keep work areas clean and organized.
SATTA MATKA | DPBOSS | KALYAN MAIN BAZAR | FAST MATKA RESULT KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA
MATKA NUMBER FIX MATKANUMBER FIX SATTAMATKA FIXMATKANUMBER SATTA MATKA ALL SATTA MATKA FREE GAME KALYAN MATKA TIPS KAPIL MATKA GAME SATTA MATKA KALYAN GAME DAILY FREE 4 ANK ALL MARKET PUBLIC SEVA WEBSITE FIX FIX MATKA NUMBER INDIA.S NO1 WEBSITE TTA FIX FIX FIX MATKA GURU INDIA MATKA KALYAN CHART MATKA GUESSING KALYAN FIX OPEN FINAL 3 ANK SATTAMATKA143 GUESSING SATTA BATTA MATKA FIX NUMBER TODAY WAPKA FIX AAPKA FIX FIX FIX FIX SATTA GURU NUMBER SATTA MATKA MATKA143 SATTA SATTA SATTA MATKA SATTAMATKA1438 FIX MATKA MATKA BOSS SATTA LIVE 3MATKA 143 FIX FIX FIX KALYAN JODI MATKA KALYAN FIX FIX WAP MATKA BOSS440 SATTA MATKA FIX FIX MATKA NUMBER SATTA MATKA FIXMATKANUMBER FIX MATKA MATKA RESULT FIX MATKA NUMBER FREE DAILY FIX MATKA NUMBER FIX FIX MATKA JODI SATTA MATKA FIX ANK MATKA ANK FIX KALYAN MUMBAI MATKA NUMBER FIXMATKANUMBER SATTA NUMBER FAST MATKA RESULT SATTA BATTA INDIAN SATTA SATTA RESULT MADHUR SATTA PRABHAT SATTA FIX FIX FIX SATTA NUMBER SATTAKING143 GUESSING SATTA CHART KALYAN PENAL CHART MATKA420 SATTA GUESSING NUMBER KALYAN NIGHT CHART SATTA FIX FIX FIX SATTA NUMBER FIX FIX FIX OPEN FIX FIX WAPKA MATKA DPBOSS FIX FIX 3ANK MATKA KALYAN CHART MATKA GUESSING TARA MATKA FIX FIXMATKANUMBER FINAL ANK MATKABOSS DUBAI SATTA MATKA GOLDEN MATKA FIX FIX MATKA NUMBER FIX MATKANUMBER FIX FIX FIX MATKA NUMBER FIX MATKANUMBER FIX SATTAMATKA FIXMATKANUMBER SATTA MATKA ALL SATTA MATKA FREE GAME KALYAN MATKA TIPS KAPIL MATKA GAME SATTA MATKA KALYAN GAME DAILY FREE 4 ANK ALL MARKET PUBLIC SEVA SATTA FIX FIX FIX MATKA GURU INDIA MATKA KALYAN CHART MATKA GUESSING KALYAN FIX OPEN FINAL 3 ANK SATTAMATKA143 GUESSING SATTA BATTA MATKA FIX NUMBER TODAY WAPKA FIX AAPKA FIX FIX FIX FIX SATTA GURU NUMBER SATTA MATKA MATKA143 SATTA SATTA SATTA MATKA SATTAMATKA1438 FIX MATKA MATKA BOSS SATTA LIVE 3MATKA 143 FIX FIX FIX KALYAN JODI MATKA KALYAN FIX FIX WAP MATKA BOSS440 SATTA MATKA FIX FIX MATKA NUMBER SATTA MATKA FIXMATKANUMBER FIX MATKA MATKA RESULT FIX MATKA NUMBER FREE DAILY FIX MATKA NUMBER FIX FIX MATKA JODI SATTA MATKA FIX ANK MATKA ANK FIX KALYAN MUMBAI MATKA NUMBER FIXMATKANUMBER SATTA NUMBER FAST MATKA RESULT SATTA BATTA INDIAN SATTA SATTA RESULT MADHUR SATTA PRABHAT SATTA FIX FIX FIX SATTA NUMBER SATTAKING143 GUESSING SATTA CHART KALYAN PENAL CHART MATKA420 SATTA GUESSING NUMBER KALYAN NIGHT CHART SATTA FIX FIX FIX SATTA NUMBER FIX FIX FIX OPEN FIX FIX WAPKA MATKA DPBOSS FIX FIX 3ANK MATKA KALYAN CHART MATKA GUESSING TARA MATKA FIX FIXMATKANUMBER FINAL ANK MATKABOSS DUBAI SATTA MATKA GOLDEN MATKA WAPKA.FIX FIX FIX
Mr. Brainwash ❤️ Beautiful Girl _ FRANK FLUEGEL GALERIE.pdfFrank Fluegel
Mr. Brainwash Beautiful Girl / Mixed Media / signed / Unique
Year: 2023
Format: 96,5 x 127 cm / 37.8 x 50 inch
Material: Fine Art Paper with hand-torn edges.
Method: Mixed Media, Stencil, Spray Paint.
Edition: Unique
Other: handsigned by Mr. Brainwash front and verso.
Beautiful Girl by Mr. Brainwash is a mixed media artwork on paper done in 2023. It is unique and of course signed by Mr. Brainwash. The picture is a tribute to his own most successful work of art, the Balloon Girl. In this new creation, however, the theme of the little girl is slightly modified.
In Mr. Brainwash’s mixed media artwork titled “Beautiful Girl,” we are presented with a captivating depiction of a little girl adorned in a summer dress, with two playful pigtails framing her face. The artwork exudes a sense of innocence and whimsy, as the girl is shown in a dreamy state, lifting one end of her skirt and looking down as if she were about to dance. Through the use of mixed media, Mr. Brainwash skillfully combines different artistic elements to create a visually striking composition. The vibrant colors and bold brushstrokes bring the artwork to life, evoking a sense of joy and happiness. The attention to detail in the girl’s expression and body language adds depth and character to the piece, allowing viewers to connect with the young protagonist on a personal and emotional level. “Beautiful Girl” is a testament to Mr. Brainwash’s unique artistic style, blending elements of street art, pop art, and contemporary art to create a visually captivating and emotionally resonant artwork.
The use of mixed media in “Beautiful Girl” adds an additional layer of complexity to the artwork. By combining different artistic techniques and materials, such as stencils, spray paint, and collage, Mr. Brainwash creates a dynamic and textured composition that grabs the viewer’s attention. The juxtaposition of different textures and patterns adds depth and visual interest to the piece, while also emphasizing the artist’s eclectic and experimental approach to art-making. The inclusion of collage elements, such as newspaper clippings and torn posters, further enhances the artwork’s urban and contemporary feel. Overall, “Beautiful Girl” is a visually captivating and thought-provoking artwork that showcases Mr. Brainwash’s talent for blending different artistic elements to create a truly unique and engaging piece.
➒➌➍➑➊➑➏➍➋➒ Satta Matka Satta result marka result
Satta Matka Satta result marka result Dpboss sattamatka341 satta143 Satta Matka Sattamatka New Mumbai Ratan Satta Matka Fast Matka Milan Market Kalyan Matka Results Satta Game Matka Game Satta Matka Kalyan Satta Matka Mumbai Main Online Matka Results Satta Matka Tips Milan Chart Satta Matka Boss
New Star Day Satta King Live Satta Matka Results Satta Matka Company Indian Matka Satta Matka Kalyan Night Matka
➒➌➍➑➊➑➏➍➋➒ Satta Matka Satta result marka result
➒➌➎➏➑➐➋➑➐➐ Matka Guessing Satta Matka Kalyan panel Chart Indian Matka Satta Matta Matka Dpboss KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA
❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart Final Matka Satta Matta Matka 143 Kalyan Chart Satta fix Jodi Kalyan Final ank Matka Boss Satta 143 Matka 420 Golden Matka Final Satta Kalyan Penal Chart Dpboss 143 Guessing Kalyan Night Chart
KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka
KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA
➒➌➎➏➑➐➋➑➐➐KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA
2. Engine disassembling & assembling
Engine disassembling
Step 1
Remove the pipe (1) from the thermostatic valve
sat, loosen the alternator retaining bolts and
remove the fan drive belt (2).
Step 2
Remove the retaining bolts, fan (1) spacer and
drive pulley (2), detach the return pipe (3) from
the coolant pump.
Step 3
Remove the retaining bolts and detach the
coolant pump (1).
Step 4
Remove the retaining bolts and detach the
coolant pump support (1).
A1.48 MR306-10.2004-EN
3. Engine disassembling & assembling
Engine disassembling
Step 5
Unscrew the unions (2 and 3) on the injection
pump and fuel pump, remove the retaining bolts
and extract the fuel pump, complete with support
lines.
Step 6
Remove the retaining bolts and disconnect the
complete thermostatic valve unit (1).
Step 7
Remove the retaining bolts and remove the
alternator (1), complete with support (2).
Step 8
Unscrew the retaining bolts and disconnect the
exhaust manifold (1).
Step 9
Remove the engine oil filter (2).
MR306-10.2004-EN A1.49
4. Engine disassembling & assembling
Engine disassembling
Step 10
Disconnect the injection pump and injection line
(2).
Step 11
Remove the retaining bolts and remove the inlet
manifold (1).
Step 12
Make sure that there is references marks (2) for
injection pump timing operations and remove the
pump retaining bolts (1).
Step 13
Remove the access cover (1) of the injection
pump drive gearbox.
A1.50 MR306-10.2004-EN
5. Engine disassembling & assembling
Engine disassembling
Step 14
Unscrew the nut securing the injection pump to
the drive gear (1).
Step 15
Extract the injection pump drive gear-using tool
1035170097 (2) and recover the injection pump
and the woodruff key.
Step 16
Unscrew the retaining nuts (1) and recover the
fuel pump support (2).
Step 17
Disconnect the hydraulic delivery & suction pipe
(1 & 2 respectively) by loosening their Allen key
bolts and disconnect the hydraulic filters.
Step 18
Remove the retaining bolts and detach the starter
motor (1).
1
1
2
MR306-10.2004-EN A1.51
6. Engine disassembling & assembling
Engine disassembling
Step 19
Remove the injector mounting nuts, the
underlying spherical washers, then the supports
and the injectors themselves.
Step 20
20.Remove the rocker cover bolts (1), washers
and seals, and then the rocker cover (2) and its
gasket.
Step 21
Remove the rocker shaft retaining bolts (2), and
then remove the entire rocker shaft assembly (1).
Step 22
Remove the valve collets (1) and extract the
pushrods (2).
Step 23
Unscrew the cylinder head bolts (1) and remove
the head using a hoist and lifting hook.
Step 24
Remove the cylinder head gasket.
A1.52 MR306-10.2004-EN
7. Engine disassembling & assembling
Engine disassembling
Step 25
Turn the engine upside down on the rotary stand,
remove the sump pan bolts, the sump pan (1)
and its gasket (2).
Step 26
Unscrew the retaining bolts and remove the oil
pick-up pipe (1) complete with the strain filter and
seal.
Step 27
Unscrew the retaining bolts (2) and detach the
counter weight housing (3) by moving it outward,
remove the sleeve coupling (4) and the housing
(3).
Step 28
Unscrew the sump pan retaining bolts (4) and
remove the sump pan using a hoist, lifting hook
and lifting chain with eyeholes.
Step 29
Remove the half-gaskets (1) and (3) between the
crankcase and sump pan and the gasket (2)
between the timing gear carrier and sump pan.
Step 30
Remove the gasket (1) between the flywheel
carrier and sump pan.
NOTE: When relocating gaskets (1), in this figure
and (2), in previous figure, apply RHODORSIL
CAF 1 silicone sealing compound to the mating
surfaces.
MR306-10.2004-EN A1.53
8. Engine disassembling & assembling
Engine disassembling
Step 31
Remove the rotating counterweight oil seal O-ring
(1) installed on the crankcase-mating surface.
Step 32
Unscrew retaining bolts (1) and remove the
complete oil pump.
NOTE: For model 8045.25.785 refer to point 54.
Step 33
Unscrew the retaining bolts (2) and remove the
crankshaft pulley (1).
Step 34
Straighten the lock tab, hold the crankshaft
against rotation and unscrew nut.
A1.54 MR306-10.2004-EN
9. Engine disassembling & assembling
Engine disassembling
Step 35
Pull the pulley hub off the crankshaft using (1)
and recover the woodruff key.
Step 36
Unscrew the retaining bolt (1) and remove the
timing cover and its gasket.
Step 37
Unscrew the retaining bolts and remove the lift
pump gear carrier (1).
Step 38
Remove the spring ring (1) and remove the thrust
washer and the intermediate gear (2).
NOTE: When refitting the intermediate gear see
engine timing instructions.
MR306-10.2004-EN A1.55
10. Engine disassembling & assembling
Engine disassembling
Step 39
Unscrew the retaining bolts (1) and remove the
intermediate gear journal.
Step 40
Unscrew the retaining bolts (2) and withdraw the
camshaft (3) complete with the crankshaft gear
(1) and the end plate (4).
Step 41
Remove the spring ring (1) and the thrust
washer, and withdraw the gear with fuel supply
pump camshaft (2) from the opposite side.
NOTE: This gear transmits drive to the injection
pump. On re-assembly see timing instructions.
Step 42
Unscrew the retaining bolts (1) and remove the
timing gear case.
A1.56 MR306-10.2004-EN
11. Engine disassembling & assembling
Engine disassembling
Step 43
Remove the O-ring seal (1) installed in the lift
pump drive shaft lubrication line.
Step 44
Remove the crankcase - timing gear case gasket.
Step 45
Rotate the engine on the stand. Unscrew the big-
end cap bolts (2) and recover the big-end caps
with their shell bearings.
Step 46
Slide the pistons (1), complete with rings,
gudgeon pins and connecting rods, out of the
cylinder linings.
Step 47
Rotate the engine on the stand through 90 o
back
to the horizontal position. Unscrew the flywheel
bolts and remove the flywheel with the aid of a
hoist and hook.
Step 48
Unscrew the retaining bolts and remove the rear
oil seal carrier (1) complete with gasket
MR306-10.2004-EN A1.57
12. Engine disassembling & assembling
Engine disassembling
Step 49
Unscrew the main bearing cap bolts (1), and
remove the main bearing caps with relative
bearing shells, and recover the thrust washer
located on the penultimate main bearing, as
shown in the figure.
Step 50
Lift the crankshaft clear of the crankcase using a
hoist and nylon sling. Recover the bearing shells,
thrust washers and tappets.
Step 51
Turn the engine on the stand through 180 o
;
attach the lifting chain with eyeholes to the
crankcase, as shown in the figure.
Step 52
Lift the engine clear of the stand.
Step 53
Unscrew the retaining bolts and remove the rear
crankcase housing (1) and its gasket.
NOTE: Oil pump model 8045.25.785
Step 54
Remove the fixing screws (4), and take off the
washers (3) and the engine lubrication oil pump
(2) complete with pressure relief valve (1).
Step 55
Remove the lubricating oil pipe (3). as shown in
the next figure.
Step 56
Remove spring ring (18)
Step 57
Remove spring ring (25) and cover (23) with
relative O- ring seal (24).
Step 58
Withdraw gear (22) from sump.
A1.58 MR306-10.2004-EN
13. Engine disassembling & assembling
Engine disassembling
Step 59
Remove spring ring (2), gear (26) and the thrust
washers (1).
Step 60
Inspect the shaft (27). If signs of scoring or wear
are evident, the shaft must be replaced.
Step 61
Withdraw the spring pins (4) and dismantle the
counter weight shaft using a suitable drift.
Step 62
Remove the counterweight drive gear (13) by
removing the spring ring (9) and the carrier
retaining bolts (6).
Step 63
Remove spring ring (4) and intermediate gear (3).
1. Thrust washers.
2. Spring ring.
3. Lubricating oil pipe for bushing (28).
4. Shaft retaining spring pin (5).
5. Counterweight rotation shaft.
6. Counterweight.
7. Carrier for counterweight drives gear (13).
8. Thrust washer.
9. Circlip.
10. Counterweight intermediate gear.
11. Bolts securing counterweight housing to
sump.
12. Counterweight housing.
13. Counterweight drives gear.
14. Screen filter.
15. Screen filter retaining bolt
16. Bushing.
17. Rigid coupling sleeve.
18. Spring ring.
19. Thrust washer.
20. Carrier for gear (22).
21. Thrust washer.
22. Counterweight drives gear.
23. Cover.
24. O-ring seal.
25. Spring ring.
26. Intermediate gear.
27. Shaft for gear (26).
28. Bushing.
MR306-10.2004-EN A1.59
14. Engine disassembling & assembling
Engine assembling
General notes and information
- After dismantling the engine, clean all parts carefully.
- To reassemble the engine, carry out the dismantling operations in reverse order mentioned
above.
- Tight the nut/bolt on specified torque.
In addition, make sure to:
- Replace all seals and gaskets at each complete or partial engine rebuild.
- Lubricate all rotating parts and oil seals with engine oil prior to installation.
- Lubricate the oil filter mounting seal prior to filling the filter.
Mounting the balancing device with counter-rotating weight
Disassembling operation 58 to 66
Step 1
Assemble counterweight parts in the housing (2),
carrying out dismantling operations 64 to 66 in
reverse order. Align the positioning marks on the
gear (4) and counterweights (1) (indicated by the
arrows in fig.)
Step 2
The intermediate gear (3) must be installed with
the longer side of its hub towards the casing side.
Step 3
The holes for the lock pins (1) in the
counterweight shafts (2) must be aligned with the
corresponding holes in the casing.
Step 4
Install the counterweight assembly on the sump,
carrying out the operations 58 to 62 in reverse
order.
A1.60 MR306-10.2004-EN
15. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
16. Engine disassembling & assembling
Engine assembling
Mounting the tappets and drive shaft with main bearing caps, bearing and thrust rings:
Checking axial play of drive shaft
Disassembling operation 52 to 53
Step 5
Install the tappets in their crankcase bores.
Step 6
Lubricate the main bearing seal with engine oil
and install the half shell bearings (3).
Step 7
Stick the semi circular thrust washers (1) to both
sides of the penultimate main bearing with
grease (2).
Step 8
Lubricate the upper surfaces of the main bearing
shell with engine oil and lower the crankshaft (1)
into position, taking care not to dislodge the semi-
circular thrust washers installed previously.
Step 9
Lubricate the crankshaft journals with engine oil
and fit the main bearing caps (3) with the half
shells (4), fitting the top semicircular thrust
washers (2) to the penultimate bearing cap.
Step 10
Rotate the crankshaft (1) a few times to allow the
parts to settle into position.
Step 11
Insert the main bearing cap bolts and screw in
until the head of the bolt is up against the cap.
MR306-10.2004-EN A1.61
17. Engine disassembling & assembling
Engine assembling
Mounting the tappets and drive shaft with main bearing caps, bearing and thrust rings:
Checking axial play of drive shaft
Step 12
Tighten all cap bolts (1) to a torque of 80Nm.
Step 13
Tighten each cap bolt (1) through a further 90°
using the tool 1035170088 (2).
Step 14
Check that the crankshaft end float does not
exceed the value specified.
A1.62 MR306-10.2004-EN
18. Engine disassembling & assembling
Engine assembling
Mounting the rear cover with seal and engine flywheel
Disassembling operation 51
Step 15
Fill the rear oil seal carrier (3) with outer seal.
Tighten the retaining bolt (2) to the specified
torque. Using a feeler gauge (1), check that the
crankshaft flange is coaxial with the carrier.
Step 16
Fit the inner rear oil seal using installer
1035170090 (1) and handgrip.
Step 17
Fit the flywheel and tighten the retaining bolts (1)
to a torque of 40Nm.
Step 18
Using tool 1035170088 (1), tighten each flywheel
bolt (2) through a further 60o
.
MR306-10.2004-EN A1.63
19. Engine disassembling & assembling
Engine assembling
Mounting the pistons complete with rings, pins, connecting rods, big end bearings:
Checking protrusion in relation to cylinder block face
Disassembling operation 48 to 49
Step 19
Lubricate pistons, rings and cylinder liners with
engine oil prior to fitting.
Step 20
Using the piston ring pliers (As shown in fig.) fit
the piston rings. Make sure that the piston ring
gaps are offset at 180°..
Step 21
Fit piston ring clamp to compress the rings,
making sure that the piston ring gaps remain in
the position specified in the previous point.
Step 22
Insert the piston / connecting rod into the cylinder
liner, checking that the connecting rod number
corresponds with the cylinder number and that
the number stamped on the connecting rod is
facing away from the camshaft.
Step 23
Fit the big-end caps (1), complete with shells, to
the crank pins and tighten the cap bolts (2) to a
torque of 40Nm.
Step 24
Using tool 292248 (1), tighten each big-end cap
bolt (2) through a further 60°.
Step 25
Rotate the engine on the stand through 180° and
clean the upper face of the cylinder block.
Bring the pistons (2), up to TDC and, using a dial
gauge with a magnetic base (1), check that the
piston protrusion from the cylinder block face is
within the tolerance limits.
A1.64 MR306-10.2004-EN