Submit Search
Upload
Certificate of Radiation Safety Training
•
1 like
•
527 views
E
Eric Choi
Follow
Slideshow view
Report
Share
Slideshow view
Report
Share
1 of 1
Download now
Download to read offline
Recommended
Ideal presentation about hydrogen production.
Hydrogen Production ppt.pptx
Hydrogen Production ppt.pptx
MdHelalHossain6
NM
Nanomanufacturing ppt
Nanomanufacturing ppt
Akash Maurya
I have explained here, Vacuum system, pumps, free mean path, gauge, and leak detection methods
Vacuum system
Vacuum system
sagarkumbhar27
This report takes a look into the patenting activity around gallium Nitride uncovering the companies, inventors, and key applications. GaN is a binary III-V direct bandgap semiconductor commonly used in LEDs. Its wide-band gap of 3.4 eV affords its special properties for applications in optoelectronic, high-power and high-frequency devices. Because GaN offers very high breakdown voltages, high electron mobility, and saturation velocity it is also an ideal candidate for high-power and high-temperature microwave applications like RF power amplifiers at microwave frequencies and high-voltage switching devices for power grids. Solutions that use GaN-based RF transistors are also replacing the magnetrons used in microwave ovens. Gallium Nitride (GaN) transistor models have evolved from GaAs (gallium arsenide) transistor models; however there are many advantages GaN offers: • Higher operating voltage (over 100-V breakdown) • Higher operating temperature (over 150°C channel temperature) • Higher power density (5 to 30 W/mm) • Durable and crack-resistant material GaN devices are often grown on SiC (silicon carbide) substrates, but to achieve lower-cost GaN devices, they can be grown on sapphire and silicon wafers. GaN’s wide bandgap allows for higher breakdown voltages and operation at high temperatures. The high thermal conductivity of SiC makes it a better substrate than silicon for power amplifier applications that require good heat sinking.
Gallium Nitride (GaN)
Gallium Nitride (GaN)
Gridlogics
Here, you can get all info about Laser marking System, configuration, benifits and types of laser marking sytem ...
Laser marking system
Laser marking system
Justin Elliott
MOCVD: Epitaxial Growth and Reaction Mechanism
Part III. Metal-Organic Chemical Vapor Deposition
Part III. Metal-Organic Chemical Vapor Deposition
Anthony Liu
Electrospinning
Electrospinning
Sukhdev Tudu
X-rays were discovered in 1895 by the German physicist Wilhelm Conrad Röntgen, who earned the Nobel Prize in Physics in 1901. Although their potential applications in medical imaging diagnosis were clear from the beginning, the implementation of the first X-ray computed tomography system was made in 1972 by Godfrey Newbold Hounsfield (Nobel prize winner in 1979 for Physiology and Medicine), who constructed the prototype of the first medical CT scanner and is considered the father of computed tomography. CT was introduced into clinical practice into 1971 with a scan of a cystic frontal lobe tumor on a patient at Atkinson Morley Hospital in Wimbledon (United Kingdom). After this, CT was immediately welcomed by the medical community and has often been referred to as the most important invention in radiological diagnosis, since the discovery of X-rays [1]. The first applications of CT in an industrial context is traced back to the first 1980´s, in the field of non destructive testing, where small number of slices of the object were visually inspected. 3D quantitative industrial CT applications appeared in the later 1990s, with simple volume and distance analysis [2]. Today, thanks to relevant improvements in both hardware and software, CT has become a powerful and widely used tool among non destructive techniques, capable of inspecting external and internal structures (without destroying them) in many industrial applications. Development of more and more stable X-ray sources and better detectors led to design of more complex CT system, providing accurate geometrical information with micrometer accuracy. CT is widely used for geometrical characterization of test objects, material composition determination, density variation inspection etc. In a relative short time, CT is capable to produce a complete three-dimensional model and tolerances of the scanned machined parts can be verified. Because of the growing interest on precision in production engineering and an increasing demand for quality control and assurance, CT is leading the field of manufacturing and coordinate metrology. With respect to traditional techniques, CT systems have indisputable advantages: internal and external geometry can be acquired without destroying the part, with a density of information much higher than common tactile and optical coordinate measuring. A key parameter for reliability of the measurement process is the establishment of measuring uncertainty. Since there are many influence parameters in CT, uncertainty contributors in CT and standards dealing with quantification of CT have not been completely established yet. The assessment of the uncertainty budget becomes a challenge for all researchers
Computed Tomography (ct),CT scan NDT
Computed Tomography (ct),CT scan NDT
harsh soni
Recommended
Ideal presentation about hydrogen production.
Hydrogen Production ppt.pptx
Hydrogen Production ppt.pptx
MdHelalHossain6
NM
Nanomanufacturing ppt
Nanomanufacturing ppt
Akash Maurya
I have explained here, Vacuum system, pumps, free mean path, gauge, and leak detection methods
Vacuum system
Vacuum system
sagarkumbhar27
This report takes a look into the patenting activity around gallium Nitride uncovering the companies, inventors, and key applications. GaN is a binary III-V direct bandgap semiconductor commonly used in LEDs. Its wide-band gap of 3.4 eV affords its special properties for applications in optoelectronic, high-power and high-frequency devices. Because GaN offers very high breakdown voltages, high electron mobility, and saturation velocity it is also an ideal candidate for high-power and high-temperature microwave applications like RF power amplifiers at microwave frequencies and high-voltage switching devices for power grids. Solutions that use GaN-based RF transistors are also replacing the magnetrons used in microwave ovens. Gallium Nitride (GaN) transistor models have evolved from GaAs (gallium arsenide) transistor models; however there are many advantages GaN offers: • Higher operating voltage (over 100-V breakdown) • Higher operating temperature (over 150°C channel temperature) • Higher power density (5 to 30 W/mm) • Durable and crack-resistant material GaN devices are often grown on SiC (silicon carbide) substrates, but to achieve lower-cost GaN devices, they can be grown on sapphire and silicon wafers. GaN’s wide bandgap allows for higher breakdown voltages and operation at high temperatures. The high thermal conductivity of SiC makes it a better substrate than silicon for power amplifier applications that require good heat sinking.
Gallium Nitride (GaN)
Gallium Nitride (GaN)
Gridlogics
Here, you can get all info about Laser marking System, configuration, benifits and types of laser marking sytem ...
Laser marking system
Laser marking system
Justin Elliott
MOCVD: Epitaxial Growth and Reaction Mechanism
Part III. Metal-Organic Chemical Vapor Deposition
Part III. Metal-Organic Chemical Vapor Deposition
Anthony Liu
Electrospinning
Electrospinning
Sukhdev Tudu
X-rays were discovered in 1895 by the German physicist Wilhelm Conrad Röntgen, who earned the Nobel Prize in Physics in 1901. Although their potential applications in medical imaging diagnosis were clear from the beginning, the implementation of the first X-ray computed tomography system was made in 1972 by Godfrey Newbold Hounsfield (Nobel prize winner in 1979 for Physiology and Medicine), who constructed the prototype of the first medical CT scanner and is considered the father of computed tomography. CT was introduced into clinical practice into 1971 with a scan of a cystic frontal lobe tumor on a patient at Atkinson Morley Hospital in Wimbledon (United Kingdom). After this, CT was immediately welcomed by the medical community and has often been referred to as the most important invention in radiological diagnosis, since the discovery of X-rays [1]. The first applications of CT in an industrial context is traced back to the first 1980´s, in the field of non destructive testing, where small number of slices of the object were visually inspected. 3D quantitative industrial CT applications appeared in the later 1990s, with simple volume and distance analysis [2]. Today, thanks to relevant improvements in both hardware and software, CT has become a powerful and widely used tool among non destructive techniques, capable of inspecting external and internal structures (without destroying them) in many industrial applications. Development of more and more stable X-ray sources and better detectors led to design of more complex CT system, providing accurate geometrical information with micrometer accuracy. CT is widely used for geometrical characterization of test objects, material composition determination, density variation inspection etc. In a relative short time, CT is capable to produce a complete three-dimensional model and tolerances of the scanned machined parts can be verified. Because of the growing interest on precision in production engineering and an increasing demand for quality control and assurance, CT is leading the field of manufacturing and coordinate metrology. With respect to traditional techniques, CT systems have indisputable advantages: internal and external geometry can be acquired without destroying the part, with a density of information much higher than common tactile and optical coordinate measuring. A key parameter for reliability of the measurement process is the establishment of measuring uncertainty. Since there are many influence parameters in CT, uncertainty contributors in CT and standards dealing with quantification of CT have not been completely established yet. The assessment of the uncertainty budget becomes a challenge for all researchers
Computed Tomography (ct),CT scan NDT
Computed Tomography (ct),CT scan NDT
harsh soni
Intro to radiography 1_2(NDT)
Intro to radiography 1_2(NDT)
Ravi Shekhar
Detailed Presentation on Radiography Testing. It is prepared on the lines of ASNT Level II pattern. A V Abhishek abhishek.agyarapu@gmail.com
Radiography Testing Presentation
Radiography Testing Presentation
Abhishek Agyarapu
Optical and electronic properties of ITO AND FTO:Physical properties, why use as TCOs, optical properties,electronic properties, work function and kelvin probe method and deposition technique.
ITO (indium tin Oxide) & FTO (fluorine doped tin oxide )
ITO (indium tin Oxide) & FTO (fluorine doped tin oxide )
Preeti Choudhary
Learn about electrospinning, the most used method for nanofiber fabrication and the factors affecting the quality of nanofibers.
Electrospinning
Electrospinning
Dhwani Jhala, Ph.D.
TECHNICAL
Paut full notes
Paut full notes
indukuri sraju
Metallurgy and Materials Engineering Department, University of Punjab Lahore
Polypropylene
Polypropylene
faheem maqsood
Welding and it's classification, Types of welding with their applications, advantages, disadvantages Arc welding, TIG welding, MIG welding, SAW welding, Thermit welding
Types of welding
Types of welding
Sabik T S
Cari Borras, D.Sc., FACR, FAAAPM, FIOMP
Improving Patient Radiation Protection or Evaluating Risks in Medical Imaging...
Improving Patient Radiation Protection or Evaluating Risks in Medical Imaging...
Eduardo Medina Gironzini
Acoustic Emission (AE) refers to the generation of transient elastic waves produced by a sudden redistribution of stress in a material. When a structure is subjected to an external stimulus (change in pressure, load, or temperature), localized sources trigger the release of energy, in the form of stress waves, which propagate to the surface and are recorded by sensors. With the right equipment and setup, motions on the order of picometers (10 -12 m) can be identified. Sources of AE vary from natural events like earthquakes and rockbursts to the initiation and growth of cracks, slip and dislocation movements, melting, twinning, and phase transformations in metals. In composites, matrix cracking and fiber breakage and debonding contribute to acoustic emissions. AE’s have also been measured and recorded in polymers, wood, and concrete, among other materials.
Acoustic Emission (AE) Testing
Acoustic Emission (AE) Testing
Arahvinth Krishnamoorthy
A seminar entitled 'Sol-gel technology for nano-textiles', presented in department of Textile and Apparel Designing, College of Community Science, UAS, Dharawad, by Pratikhya Badanayak and Dr. Jyoti Vastrad.
Sol-gel technology for nano-textiles
Sol-gel technology for nano-textiles
Badanayak
powder synthesis and sintering studies of yttria doped barium zirconate
Barium zirconate
Barium zirconate
Mayank Shandilya
a process of non destructive test
liquid penetration test
liquid penetration test
Abdul Rahman
Mocv Dmaterialgrowth
Mocv Dmaterialgrowth
guestda8318
nylon chemistry
Nylon 6
Nylon 6
jenus Balachandran
a brief knowledge of squeeze casting
Squeeze casting
Squeeze casting
Bhaskar Yadav
M.Sc. Semina on thin film deposition technique(CBD)
Thin films and chemical bath deposition technique
Thin films and chemical bath deposition technique
abbasalihu
about impedance in chemistry
Basics-and-Applications-of-impedance.pptx
Basics-and-Applications-of-impedance.pptx
PragyaMishra666940
UTILIZATION OF ELECTRICAL ENERGY AND TRACTION. process of electro-deposition-clearing, operation, deposition of metals, polishing and buffing. PREPARED BY: JOBIN ABRAHAM.
UTILIZATION OF ELECTRICAL ENERGY AND TRACTION. process of electro-deposition-...
UTILIZATION OF ELECTRICAL ENERGY AND TRACTION. process of electro-deposition-...
Jobin Abraham
Nondestructive testing or Non-destructive testing (NDT) is a wide group of analysis techniques used in science and industry to evaluate the properties of a material, component surface & subsurface without causing damage or effect to their future performance or properties. Non-destructive testing is used to detect abnormalities in physical, chemical or electrical characteristics.
Radiography ndt
Radiography ndt
ndtindia123
Some Applications of composite in biomedical feid
application of composite material in biomedical fild
application of composite material in biomedical fild
Ahmad Abdullah Butt
More Related Content
What's hot
Intro to radiography 1_2(NDT)
Intro to radiography 1_2(NDT)
Ravi Shekhar
Detailed Presentation on Radiography Testing. It is prepared on the lines of ASNT Level II pattern. A V Abhishek abhishek.agyarapu@gmail.com
Radiography Testing Presentation
Radiography Testing Presentation
Abhishek Agyarapu
Optical and electronic properties of ITO AND FTO:Physical properties, why use as TCOs, optical properties,electronic properties, work function and kelvin probe method and deposition technique.
ITO (indium tin Oxide) & FTO (fluorine doped tin oxide )
ITO (indium tin Oxide) & FTO (fluorine doped tin oxide )
Preeti Choudhary
Learn about electrospinning, the most used method for nanofiber fabrication and the factors affecting the quality of nanofibers.
Electrospinning
Electrospinning
Dhwani Jhala, Ph.D.
TECHNICAL
Paut full notes
Paut full notes
indukuri sraju
Metallurgy and Materials Engineering Department, University of Punjab Lahore
Polypropylene
Polypropylene
faheem maqsood
Welding and it's classification, Types of welding with their applications, advantages, disadvantages Arc welding, TIG welding, MIG welding, SAW welding, Thermit welding
Types of welding
Types of welding
Sabik T S
Cari Borras, D.Sc., FACR, FAAAPM, FIOMP
Improving Patient Radiation Protection or Evaluating Risks in Medical Imaging...
Improving Patient Radiation Protection or Evaluating Risks in Medical Imaging...
Eduardo Medina Gironzini
Acoustic Emission (AE) refers to the generation of transient elastic waves produced by a sudden redistribution of stress in a material. When a structure is subjected to an external stimulus (change in pressure, load, or temperature), localized sources trigger the release of energy, in the form of stress waves, which propagate to the surface and are recorded by sensors. With the right equipment and setup, motions on the order of picometers (10 -12 m) can be identified. Sources of AE vary from natural events like earthquakes and rockbursts to the initiation and growth of cracks, slip and dislocation movements, melting, twinning, and phase transformations in metals. In composites, matrix cracking and fiber breakage and debonding contribute to acoustic emissions. AE’s have also been measured and recorded in polymers, wood, and concrete, among other materials.
Acoustic Emission (AE) Testing
Acoustic Emission (AE) Testing
Arahvinth Krishnamoorthy
A seminar entitled 'Sol-gel technology for nano-textiles', presented in department of Textile and Apparel Designing, College of Community Science, UAS, Dharawad, by Pratikhya Badanayak and Dr. Jyoti Vastrad.
Sol-gel technology for nano-textiles
Sol-gel technology for nano-textiles
Badanayak
powder synthesis and sintering studies of yttria doped barium zirconate
Barium zirconate
Barium zirconate
Mayank Shandilya
a process of non destructive test
liquid penetration test
liquid penetration test
Abdul Rahman
Mocv Dmaterialgrowth
Mocv Dmaterialgrowth
guestda8318
nylon chemistry
Nylon 6
Nylon 6
jenus Balachandran
a brief knowledge of squeeze casting
Squeeze casting
Squeeze casting
Bhaskar Yadav
M.Sc. Semina on thin film deposition technique(CBD)
Thin films and chemical bath deposition technique
Thin films and chemical bath deposition technique
abbasalihu
about impedance in chemistry
Basics-and-Applications-of-impedance.pptx
Basics-and-Applications-of-impedance.pptx
PragyaMishra666940
UTILIZATION OF ELECTRICAL ENERGY AND TRACTION. process of electro-deposition-clearing, operation, deposition of metals, polishing and buffing. PREPARED BY: JOBIN ABRAHAM.
UTILIZATION OF ELECTRICAL ENERGY AND TRACTION. process of electro-deposition-...
UTILIZATION OF ELECTRICAL ENERGY AND TRACTION. process of electro-deposition-...
Jobin Abraham
Nondestructive testing or Non-destructive testing (NDT) is a wide group of analysis techniques used in science and industry to evaluate the properties of a material, component surface & subsurface without causing damage or effect to their future performance or properties. Non-destructive testing is used to detect abnormalities in physical, chemical or electrical characteristics.
Radiography ndt
Radiography ndt
ndtindia123
Some Applications of composite in biomedical feid
application of composite material in biomedical fild
application of composite material in biomedical fild
Ahmad Abdullah Butt
What's hot
(20)
Intro to radiography 1_2(NDT)
Intro to radiography 1_2(NDT)
Radiography Testing Presentation
Radiography Testing Presentation
ITO (indium tin Oxide) & FTO (fluorine doped tin oxide )
ITO (indium tin Oxide) & FTO (fluorine doped tin oxide )
Electrospinning
Electrospinning
Paut full notes
Paut full notes
Polypropylene
Polypropylene
Types of welding
Types of welding
Improving Patient Radiation Protection or Evaluating Risks in Medical Imaging...
Improving Patient Radiation Protection or Evaluating Risks in Medical Imaging...
Acoustic Emission (AE) Testing
Acoustic Emission (AE) Testing
Sol-gel technology for nano-textiles
Sol-gel technology for nano-textiles
Barium zirconate
Barium zirconate
liquid penetration test
liquid penetration test
Mocv Dmaterialgrowth
Mocv Dmaterialgrowth
Nylon 6
Nylon 6
Squeeze casting
Squeeze casting
Thin films and chemical bath deposition technique
Thin films and chemical bath deposition technique
Basics-and-Applications-of-impedance.pptx
Basics-and-Applications-of-impedance.pptx
UTILIZATION OF ELECTRICAL ENERGY AND TRACTION. process of electro-deposition-...
UTILIZATION OF ELECTRICAL ENERGY AND TRACTION. process of electro-deposition-...
Radiography ndt
Radiography ndt
application of composite material in biomedical fild
application of composite material in biomedical fild
Download now