This document is an operation and maintenance manual for JLG telehandler models TL1055 and TL1255. It contains safety and operating instructions, a pre-operation checklist, descriptions of controls and indicators, and procedures for starting and operating the engine, lifting and transporting loads, and shutting down. Safety warnings are provided regarding tip over hazards, electrical hazards, pinch points, and falling loads.
JOHN DEERE 5105 TRACTOR Service Repair Manualkjmsfm eiokid
This is the Highly Detailed factory service repair manual for theJOHN DEERE 5105 TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.JOHN DEERE 5105 TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Introduction
General information
Engine repair
Fuel and air repair
Electrical repair
Power train repair
Steering and brake repair
Hydraulic repair
Miscellaneous repair
Operator station repair
Operational checkout procedures
Engine operation, tests and adjustments
Fuel / air operation, tests and adjustments
Electrical system operation, tests & adjustments
Power train operation, tests & adjustments
Steering and brake operation, tests & adjustments
Hydraulic system operation, tests & adjustments
Dealer fabricated tools
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveJOHN DEERE 5105 TRACTOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
JOHN DEERE 5105 TRACTOR Service Repair Manualkjmsfm eiokid
This is the Highly Detailed factory service repair manual for theJOHN DEERE 5105 TRACTOR, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.JOHN DEERE 5105 TRACTOR Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Introduction
General information
Engine repair
Fuel and air repair
Electrical repair
Power train repair
Steering and brake repair
Hydraulic repair
Miscellaneous repair
Operator station repair
Operational checkout procedures
Engine operation, tests and adjustments
Fuel / air operation, tests and adjustments
Electrical system operation, tests & adjustments
Power train operation, tests & adjustments
Steering and brake operation, tests & adjustments
Hydraulic system operation, tests & adjustments
Dealer fabricated tools
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveJOHN DEERE 5105 TRACTOR Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
What Causes 'Trans Failsafe Prog' to Trigger in BMW X5
Caterpillar cat tl1255 telehandler operation and maintenance manual
1. Operation &
Maintenance Manual
Original Instructions
Keep this manual with machine at all times.
Models
TL1055
TL1255
S/N TBM00100 & After
S/N TBN00100 & After
31200249
Revised
May 17, 2012
2. CALIFORNIA PROPOSITION 65
BATTERY WARNING
Battery posts,
terminals and related
accessories contain
lead and lead compounds,
chemical known to the
State of California
to cause cancer and
reproductive harm.
WASH HANDS
AFTER HANDLING!
CALIFORNIA PROPOSITION 65
EXHAUST WARNING
Diesel Engine exhaust and
some of its constituents
are known to the State of
California to cause cancer,
birth defects and other
reproductive harm.
3. Revision Log
a
31200249
Revision Log
REVISION LOG
September 29, 2006 - A - Original Issue of Manual
October 27, 2006 - B - Revised pages 3-10, 5-13 thru 5-22, 9-2, 9-4 and 9-5.
January 19, 2007 - C - Revised pages 2-3 thru 2-5, 3-10, 3-11 and 7-1.
May 2, 2007 - D - Added attachment information. Revised pages 2-5, 2-6, 2-7, 2-10,
3-5, 5-12, 5-16, 5-18 thru 5-25, 9-1 and 9-5.
October 1, 2008 - E - Revised page 9-2.
October 16, 2009 - F - Revised covers and pages b, c, d, 1-1 thru 1-6, 1-8, 1-9, 2-1,
2-2, 2-3, 2-6 thru 2-10, 3-1 thru 3-18, 4-1 thru 4-12, 5-1, 5-2, 5-4 thru 5-12, 5-14 thru
5-32, 6-1, 6-2, 7-1 thru 7-5, 7-7, 7-8, 7-13 thru 7-16, 7-18, 7-19, 7-20, 8-1 & 9-1 thru
9-5.
December 20, 2010 - G - Revised pages 7-14, 9-3 & 9-5.
February 14, 2011 - H - Revised pages 1-9, 2-3, 2-4, 2-5, 2-9, 2-10, 2-11, 3-4, 3-5,
3-10, 4-3, 4-9, 4-10, 5-2, 5-30, 6-1, 7-3, 7-4, 7-5, 7-7, 7-8, 7-10 thru 7-15, 7-18 thru
7-22, 8-1 & 9-1 thru 9-4.
March 10, 2011 - I - Revised pages 2-3, 2-5, 2-9, 7-11 thru 7-15, 7-19 thru 7-22 &
9-3.
May 17, 2012 - J - Revised pages 4-1, 5-2, 5-22, 5-23, 5-24, 5-25 & 7-2.
4. Read This First
b 31200249
Read This First
This manual is a very important tool! Keep it with the machine at all times.
The purpose of this manual is to provide owners, users, operators, lessors, and
lessees with the precautions and operating procedures essential for the safe and
proper machine operation for its intended purpose.
Due to continuous product improvements, JLG Industries, Inc. reserves the right to
make specification changes without prior notification. Contact JLG Industries, Inc.
for updated information.
Operator Qualifications
The operator of the machine must not operate the machine until this manual has
been read, training is accomplished and operation of the machine has been
completed under the supervision of an experienced and qualified operator.
Operation within the U.S.A. requires training per OSHA 1910.178.
Operators of this equipment must possess a valid, applicable driver’s license, be in
good physical and mental condition, have normal reflexes and reaction time, good
vision and depth perception and normal hearing. Operator must not be using
medication which could impair abilities nor be under the influence of alcohol or any
other intoxicant during the work shift.
In addition, the operator must read, understand and comply with instructions
contained in the following material furnished with the telehandler:
• This Operation & Maintenance Manual
• Telehandler Safety Manual (ANSI only)
• All instructional decals and plates
• Any optional equipment instructions furnished
The operator must also read, understand and comply with all applicable Employer,
Industry and Governmental rules, standards and regulations.
Modifications
Any modification to this machine must be approved by JLG.
5. Read This First
c
31200249
This product must comply with all safety related bulletins. Contact JLG Industries,
Inc. or the local Caterpillar dealer representative for information regarding safety-
related bulletins which may have been issued for this product.
JLG Industries, Inc. sends safety related bulletins to the owner of record of this
machine. Contact JLG Industries, Inc. to ensure that the current owner records are
updated and accurate.
JLG Industries, Inc. must be notified immediately in all instances where JLG
products have been involved in an accident involving bodily injury or death of
personnel or when damage has occurred to personal property or the JLG product.
FOR:
• Accident Reporting and Product Safety Publications
• Current Owner Updates
• Questions Regarding Product Applications and Safety
• Standards and Regulations Compliance Information
• Questions Regarding Product Modifications
CONTACT:
Product Safety and Reliability Department
JLG Industries, Inc.
13224 Fountainhead Plaza
Hagerstown, MD 21742
USA
In USA:
Toll Free: 1-877-JLG-SAFE (1-877-554-7233)
Outside USA:
Phone: +1-717-485-6591
E-mail:
ProductSafety@JLG.com
6. Read This First
d 31200249
Other Publications Available
Service Manual..........................................................................................31200293
Illustrated Parts Manual.............................................................................31200257
Note: The following standards may be referenced in this manual:
ANSI is compliant to ANSI/ITSDF B56.6
AUS is compliant to AS 1418.19
CE is compliant to EN1459
Refer to the machine Serial Number Plate to identify the applicable compliance
standard.
7. Table of Contents
i
31200249
TABLE OF CONTENTS
Revision Log
Read This First
Operator Qualifications ......................................................b
Modifications ......................................................................b
Other Publications Available ..............................................d
Table of Contents
Section 1 - General Safety Practices
1.1 Hazard Classification System ..............................................1-1
Safety Alert System and Safety Signal Words................1-1
1.2 General Precautions ............................................................1-1
1.3 Operation Safety..................................................................1-2
Electrical Hazards ...........................................................1-2
Tip Over Hazard..............................................................1-3
Travel Hazard .................................................................1-6
Load Falling Hazard........................................................1-7
Lifting Personnel .............................................................1-8
Driving Hazards On Slopes.............................................1-9
Pinch Points and Crush Hazards ..................................1-10
Fall Hazard....................................................................1-12
Chemical Hazards.........................................................1-13
Section 2 - Pre-Operation and Inspection
2.1 Pre-Operation Check and Inspection...................................2-1
2.2 Safety Decals.......................................................................2-3
2.3 Walk-Around Inspection.......................................................2-8
2.4 Warm-Up and Operational Checks....................................2-10
Warm-Up Check ...........................................................2-10
Operational Check ........................................................2-10
2.5 Operator Cab .....................................................................2-11
2.6 Windows ............................................................................2-12
Cab Door Window (if equipped)....................................2-12
Section 3 - Controls and Indicators
3.1 General ................................................................................3-1
3.2 Controls ...............................................................................3-2
Dash Controls and Indicators..........................................3-4
Ignition ............................................................................3-6
Park Brake ......................................................................3-7
Parking Procedure ..........................................................3-7
Transmission Control Lever ............................................3-8
Table of Contents
8. Table of Contents
ii 31200249
Boom Joystick .............................................................. 3-10
Frame Level Joystick.................................................... 3-11
Auxiliary Hydraulic Joystick .......................................... 3-12
Outrigger Joysticks....................................................... 3-13
Right Hand Panel ......................................................... 3-14
Accessory Control Lever (if equipped) ......................... 3-16
3.3 Steer Modes...................................................................... 3-17
Steer Mode Change ..................................................... 3-17
3.4 Operator Seat.................................................................... 3-18
Adjustments.................................................................. 3-18
Seat Belt....................................................................... 3-19
3.5 Boom Angle and Extension Indicators .............................. 3-20
Section 4 - Operation
4.1 Engine ................................................................................. 4-1
Starting the Engine......................................................... 4-1
Extreme Cold Weather Starting (if equipped)................. 4-2
Battery Boosted Starting................................................. 4-3
Normal Engine Operation............................................... 4-4
Shut-Down Procedure .................................................... 4-4
4.2 Operating with a Non-Suspended Load .............................. 4-5
Lift Load Safely............................................................... 4-5
Picking Up a Load .......................................................... 4-5
Transporting a Load ....................................................... 4-6
Leveling Procedure......................................................... 4-6
Placing a Load................................................................ 4-7
Disengaging a Load........................................................ 4-7
4.3 Operating with a Suspended Load...................................... 4-8
Lift Load Safely............................................................... 4-8
Picking Up a Suspended Load ....................................... 4-8
Transporting a Suspended Load .................................... 4-9
Leveling Procedure......................................................... 4-9
Placing a Suspended Load........................................... 4-10
Disengaging a Suspended Load .................................. 4-10
4.4 Loading and Securing for Transport.................................. 4-11
Tiedown........................................................................ 4-11
Lifting............................................................................ 4-12
11. Section 1 - General Safety Practices
1-1
31200249
SECTION 1 - GENERAL SAFETY PRACTICES
1.1 HAZARD CLASSIFICATION SYSTEM
Safety Alert System and Safety Signal Words
DANGER indicates an imminently hazardous situation which, if not avoided, will
result in death or serious injury.
WARNING indicates a potentially hazardous situation which, if not avoided, could
result in death or serious injury.
CAUTION indicates a potentiality hazardous situation which, if not avoided, may
result in minor or moderate injury.
1.2 GENERAL PRECAUTIONS
WARNING
Before operation, read and understand this manual. Failure to comply with the
safety precautions listed in this manual could result in machine damage, property
damage, personal injury or death.
DANGER OW0010
WARNING OW0021
CAUTION OW0031
12. Section 1 - General Safety Practices
1-2 31200249
1.3 OPERATION SAFETY
Electrical Hazards
• This machine is not insulated and does not provide protection from contact or
being near electrical current.
• NEVER operate the telehandler in an area where overhead power lines,
overhead or underground cables, or other power sources may exist without
ensuring the appropriate power or utility company de-energizes the lines.
• Always check for power lines before raising the boom.
• Follow employer, local and governmental regulations for clearance from
powerlines.
OW0040
10 FT
(3 M)
13. Section 1 - General Safety Practices
1-3
31200249
Tip Over Hazard
General
• For additional load requirements, refer to the appropriate load chart.
• Never use an attachment without the appropriate JLG approved load chart
installed on the telehandler.
• Understand how to properly use the load charts located in cab.
• DO NOT exceed rated lift capacity.
• Be sure that the ground conditions are able to support the machine.
• DO NOT raise boom unless frame is level (0 degrees), unless otherwise noted
on load chart.
• DO NOT level machine with boom/attachment above 4 ft (1,2 m).
(AUS - DO NOT level machine with load more than 300 mm (11.8 in) above
ground surface.)
OW0050
OW0080
OW0100
4 FT
(1,2 M)
14. Section 1 - General Safety Practices
1-4 31200249
• MAINTAIN proper tire pressure at all times. If proper tire pressures are not
maintained, this machine could tip over.
• Refer to manufacturer’s specifications for proper fill ratio and pressure
requirements for tires equipped with ballast.
• Always wear the seat belt.
• Keep head, arms, hands, legs and all other body parts inside operator’s cab at all
times.
If the telehandler starts to tip over:
• DO NOT JUMP
• BRACE YOURSELF and STAY WITH THE MACHINE
• KEEP YOUR SEAT BELT FASTENED
• HOLD ON FIRMLY
• LEAN AWAY FROM THE POINT OF IMPACT
OH2291
OH20911
OH2221
15. Section 1 - General Safety Practices
1-5
31200249
Non-Suspended Load
• DO NOT drive with boom raised.
Suspended Load
• Tether suspended loads to restrict movement.
• Weight of all rigging (slings, etc.) must be included as part of load.
• Beware of wind. Wind can cause a suspended load to swing and cause
dangerous side loads - even with tag lines.
• DO NOT attempt to use telehandler frame-leveling to compensate for load swing.
• Keep heavy part of load closest to attachment.
• Never drag the load; lift vertically.
When driving with a suspended load:
• Start, travel, turn and stop slowly to prevent load from swinging.
• DO NOT extend boom.
• DO NOT raise the load more than 11.8 in (300 mm) above ground surface or
the boom more than 45°.
• DO NOT exceed walking speed.
OW0060
OW0150
16. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
17. Section 1 - General Safety Practices
1-6 31200249
Travel Hazard
• Steering characteristics differ between steer modes. Identify the steer mode
settings of the telehandler being operated.
• DO NOT change steer modes while traveling. Steer modes must be changed
while telehandler is stationary.
• Visually verify proper wheel alignment after each steer mode change.
• Ensure that adequate clearance is provided for both rear tail swing and front fork
swing.
• Look out for and avoid other personnel, machinery and vehicles in the area. Use
a spotter if you DO NOT have a clear view.
• Before moving be sure of a clear path and sound horn.
• When driving, retract boom and keep boom/attachment as low as possible while
maintaining visibility of mirrors and maximum visibility of path of travel.
• Always look in the direction of travel.
• Always check boom clearances carefully before driving underneath overhead
obstructions. Position attachment/load to clear obstacles.
• When driving in high speed, use only front wheel steer (if steering modes are
selectable).
OAL2030
2-Wheel Front Steer 4-Wheel Circle Steer 4-Wheel Crab Steer
18. Section 1 - General Safety Practices
1-7
31200249
Load Falling Hazard
• Never suspend load from forks or other parts of carriage.
• DO NOT burn or drill holes in fork(s).
• Forks must be centered under load and spaced apart as far as possible.
OW0130