In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
What Does the Active Steering Malfunction Warning Mean for Your BMWTanner Motors
Discover the reasons why your BMW’s Active Steering malfunction warning might come on. From electrical glitches to mechanical failures and software anomalies, addressing these promptly with professional inspection and maintenance ensures continued safety and performance on the road, maintaining the integrity of your driving experience.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
𝘼𝙣𝙩𝙞𝙦𝙪𝙚 𝙋𝙡𝙖𝙨𝙩𝙞𝙘 𝙏𝙧𝙖𝙙𝙚𝙧𝙨 𝙞𝙨 𝙫𝙚𝙧𝙮 𝙛𝙖𝙢𝙤𝙪𝙨 𝙛𝙤𝙧 𝙢𝙖𝙣𝙪𝙛𝙖𝙘𝙩𝙪𝙧𝙞𝙣𝙜 𝙩𝙝𝙚𝙞𝙧 𝙥𝙧𝙤𝙙𝙪𝙘𝙩𝙨. 𝙒𝙚 𝙝𝙖𝙫𝙚 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙥𝙡𝙖𝙨𝙩𝙞𝙘 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙪𝙨𝙚𝙙 𝙞𝙣 𝙖𝙪𝙩𝙤𝙢𝙤𝙩𝙞𝙫𝙚 𝙖𝙣𝙙 𝙖𝙪𝙩𝙤 𝙥𝙖𝙧𝙩𝙨 𝙖𝙣𝙙 𝙖𝙡𝙡 𝙩𝙝𝙚 𝙛𝙖𝙢𝙤𝙪𝙨 𝙘𝙤𝙢𝙥𝙖𝙣𝙞𝙚𝙨 𝙗𝙪𝙮 𝙩𝙝𝙚 𝙜𝙧𝙖𝙣𝙪𝙡𝙚𝙨 𝙛𝙧𝙤𝙢 𝙪𝙨.
Over the 10 years, we have gained a strong foothold in the market due to our range's high quality, competitive prices, and time-lined delivery schedules.
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
2. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D9L TRACK-TYPE TRACTOR 14Y
Configuration: D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE
Disassembly and Assembly
3408E and 3412E Engines for Caterpillar Built Machines
Media Number -SENR1013-11 Publication Date -01/07/2015 Date Updated -22/08/2016
i01101057
Aftercooler - Install
SMCS - 1063-012
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: There are several possible configurations of the aftercooler. The following procedure
illustrates a typical example.
Note: The following procedure was performed on a 3408E engine. However, the process for the
3412E engine is very similar.
Note: Check the condition of the gaskets and the O-rings. If the gaskets or the O-rings are worn or
damaged, use new parts for replacement.
1/5
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Illustration 1 g00579418
Typical example
1. Install gasket (25) for the aftercooler housing, if the gasket was removed .
Illustration 2 g00579413
Typical example
2. Install aftercooler housing (23), if the housing was removed.
3. Install bolts (24) and the washers.
Illustration 3 g00579412
Typical example
2/5
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. 4. Install O-ring seals (22).
5. Lightly lubricate the bores of the aftercooler housing and O-rings (22) with glycerin.
6. Install aftercooler core (21). Use the lifting brackets on the aftercooler core and a suitable
lifting device.
The weight of the aftercooler core assembly is approximately 26 kg (57 lb).
Illustration 4 g00579409
Typical example
7. Install adapters (16) and O-ring seal (17).
8. Install adapters (18) and the O-ring seal.
9. Install elbow (19) with bolts (20).
Illustration 5 g00579407
Typical example
10. Install bolts (15) and the washers.
3/5
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 6 g00579404
Typical example
11. Install aftercooler cover (14).
12. Install clips (12), bracket (11), and bolts (13).
13. Install elbow (10) with bolts (9) and the O-ring seals.
Illustration 7 g00579403
Typical example
14. Install relief valve housing (6) with bolts (7).
15. Connect fuel line (8).
4/5
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 8 g00579401
Typical example
16. Install elbow (4) with bolts (3).
17. Connect fuel line (1).
18. Install bolt (2) and the washer in the clip.
19. Install bolt (5), the washer, and the spacer.
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Oct 11 13:55:34 UTC+0800 2021
5/5
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D9L TRACK-TYPE TRACTOR 14Y
Configuration: D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE
Disassembly and Assembly
3408E and 3412E Engines for Caterpillar Built Machines
Media Number -SENR1013-11 Publication Date -01/07/2015 Date Updated -22/08/2016
i01095415
Engine Support (Front) - Remove and Install
SMCS - 1154-010-FR
Removal Procedure
Start By:
a. Remove the crankshaft vibration damper. Refer to Disassembly and Assembly, "Vibration
Damper and Pulley - Remove and Install".
Illustration 1 g00575145
Typical example
1. Remove four bolts (1) and the washers.
2. Remove engine support (2).
Installation Procedure
1/2
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 2 g00575145
Typical example
1. Place engine support (2) in position on the engine.
2. Install four bolts (1). Tighten the bolts to a torque of 270 ± 25 N·m (200 ± 18 lb ft).
End By:
a. Install the crankshaft vibration damper. Refer to Disassembly and Assembly, "Vibration
Damper and Pulley - Remove and Install".
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Oct 11 13:56:34 UTC+0800 2021
2/2
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D9L TRACK-TYPE TRACTOR 14Y
Configuration: D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE
Disassembly and Assembly
3408E and 3412E Engines for Caterpillar Built Machines
Media Number -SENR1013-11 Publication Date -01/07/2015 Date Updated -22/08/2016
i03335401
Gear Group (Rear) - Remove
SMCS - 1206-011; 1212-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1P-0483(1)
Drive Plate 1
1U-5839 Bearing Puller 1
B FT-1342 Guide Bolt 2
(1)
Part of the 1P-0510 Driver Group
Start By:
a. Remove the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing -
Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: There are many possible configurations of the rear gear group and flywheel housing. The
following procedure illustrates a typical example.
1. Use the following procedure for disassembly of the adapter assemblies.
1/6
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Illustration 1 g00586481
Typical example
a. Support adapter assembly (1) so that the gear assembly can be pressed out of the
adapter assembly. Press gear assembly (2) out of the adapter assembly.
Illustration 2 g00586630
Typical example
b. Use Tooling (A) in order to remove bearing (3) from the gear assembly.
Illustration 3 g00586904
Typical example
2/6
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. c. Use a press in order to remove bearing (4) from adapter assembly (1).
Illustration 4 g00586907
Typical example
d. Remove bolts (5) and ring (6) from adapter assembly (1).
e. Remove O-ring seal (7) from adapter assembly (1).
Illustration 5 g00586910
Typical example
f. If necessary, remove race (8) from adapter assembly (1).
3/6
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 6 g00587590
Typical example
2. With the flywheel housing in a horizontal position, remove bolts (9) from shafts (10).
Note: The bearings that are located toward the flywheel will fall when gear (11) and gear
(12) are removed. Hold these bearings in position when the gears are removed.
3. Remove balancer gear (12) and idler gear (11).
4. Use the following procedure for disassembly of balancer gear (12).
Illustration 7 g00587608
Typical example
a. Remove shaft (13), spacer (15), bearing (14), and bearing (16) from balancer gear
(12).
Illustration 8 g00587624
Typical example
b. Remove bearing cup (17) from balancer gear (12).
Note: The bearing cups will be damaged from the removal. Use new parts for
replacement.
4/6
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 9 g00587629
Typical example
c. Remove spacer (18) from gear (12).
d. Remove bearing cup (19).
e. If necessary, remove ring (20) from gear (12).
5. Use the procedure in Step 4 in order to disassemble idler gear (11).
Illustration 10 g01712733
6. Install Tooling (B) in the crankshaft. Remove gear (20A).
7. Remove the O-ring seal from gear (20A).
5/6
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 11 g00587666
Typical example
8. Remove bolts (21). Remove camshaft gear (22).
Illustration 12 g00587668
Typical example
9. If necessary, remove dowel (23).
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Oct 11 13:57:33 UTC+0800 2021
6/6
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D9L TRACK-TYPE TRACTOR 14Y
Configuration: D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE
Disassembly and Assembly
3408E and 3412E Engines for Caterpillar Built Machines
Media Number -SENR1013-11 Publication Date -01/07/2015 Date Updated -22/08/2016
i03335022
Gear Group (Rear) - Install
SMCS - 1206-012; 1212-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
B FT-1342 Guide Bolt 2
C 1P-0524(1)
Drive Plate 1
D 1P-0513(1)
Drive Plate 1
(1)
Part of the 1P-0520 Driver Group
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: There are many possible configurations of the rear gear group and flywheel housing. The
following procedure illustrates a typical example.
1/6
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Illustration 1 g00587668
Typical example
1. Install dowel (23) in the camshaft if the dowel was removed.
Illustration 2 g00587666
Typical example
2. Install camshaft gear (22) in position on the camshaft. Install four bolts (21).
Illustration 3 g01712733
3. Install the O-ring seal on gear (20A).
2/6
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. 4. Lightly lubricate the seal on the end of the crankshaft with clean engine oil.
5. Install Tooling (B) in the crankshaft. Install gear (20A).
6. Use the following procedure for assembly of balancer gear (12).
Illustration 4 g01717018
a. Install ring (20), bearing cup (19), and spacer (18) in balancer gear (12).
Note: Spacer (18) must be installed on the deepest side of gear (12) and against ring
(20).
Illustration 5 g01712754
b. Use a press and Tooling (C) in order to install bearing cup (17). Install bearing cup
(17) on the side of the gear that is stamped with the timing mark. Bearing cup (17)
should be in contact with the spacer.
3/6
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 6 g00587608
Typical example
c. Install bearing (16), spacer (15), bearing (14), and shaft (13) in gear (12).
7. Use the procedure in Step 6 in order to assemble idler gear (11).
Illustration 7 g00587895
Typical example
8. Place idler gear (11) and balancer gear (12) in position on the flywheel housing. Make sure
that the oil holes in shafts (10) are in alignment with the holes that are in the flywheel
housing.
Note: Install balancer gear (12) with the timing mark toward the flywheel housing.
9. Install bolts (9).
10. Use the following procedure in order to assemble adapter assemblies (1).
4/6
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. Illustration 8 g00586910
Typical example
a. If the bearing race was removed, install race (8). Install race (8) in adapter assembly
(1) until the race makes contact with the counterbore.
Illustration 9 g00586907
Typical example
b. Install ring (6), bolts (5), and O-ring seal (7) on adapter assembly (1).
Illustration 10 g01712644
c. Heat bearing (3) to 135 °C (275 °F) for approximately 30 minutes.
5/6
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. d. Install bearing (3) on gear (2) until the bearing makes contact with the counterbore.
Illustration 11 g00588013
Typical example
e. Install gear (2) and the bearing in adapter assembly (1).
Illustration 12 g01712873
f. Use a press and Tooling (D) in order to install bearing (4) in adapter assembly (1).
Install the bearing until the bearing makes contact with the counterbore.
End By:
a. Install the flywheel housing. Refer to Disassembly and Assembly, "Flywheel Housing -
Remove and Install".
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Oct 11 13:58:32 UTC+0800 2021
6/6
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D9L TRACK-TYPE TRACTOR 14Y
Configuration: D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE
Disassembly and Assembly
3408E and 3412E Engines for Caterpillar Built Machines
Media Number -SENR1013-11 Publication Date -01/07/2015 Date Updated -22/08/2016
i04406249
Flywheel - Remove
SMCS - 1156-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
FT-1341 Bracket Assembly 1
1B-3623 Bolt 2
B FT-1342 Guide Bolt 2
C 138-7575 Link Bracket 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/3
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 1 g00578443
Typical example
1. Remove six bolts (1) that hold the flywheel in position.
2. Install Tool (A) in order to hold the crankshaft gear in position.
3. Remove the remainder of bolts (1) .
Illustration 2 g00578444
Typical example
4. Install Tools (B) .
2/3
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 3 g00578445
Typical example. Tooling (C) is not the tooling called out in the Table.
5. Fasten Tool (C) to a hoist and place the tool in position in the groove of flywheel (2) .
6. Pull flywheel (2) onto Tool (A) .
7. Remove Tool (A) .
8. Remove Flywheel (2) with Tool (C) .
The weight of the flywheel is approximately 78 kg (172 lb).
9. If necessary, remove the ring gear from flywheel (2) .
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Oct 11 13:59:32 UTC+0800 2021
3/3
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D9L TRACK-TYPE TRACTOR 14Y
Configuration: D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE
Disassembly and Assembly
3408E and 3412E Engines for Caterpillar Built Machines
Media Number -SENR1013-11 Publication Date -01/07/2015 Date Updated -22/08/2016
i04406250
Flywheel - Install
SMCS - 1156-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-1342 Guide Bolt 2
B 138-7575 Link Bracket 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1. Heat the ring gear to a maximum temperature of 300 °C (572 °F), and install the ring gear
on the flywheel. Ensure that the chamfer of the gear teeth will be toward the starter pinion
after the flywheel is installed.
1/3
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Illustration 1 g00578491
Typical example. Tooling (B) shown is not the tooling called out in the Table.
2. Install Tool (A) in the crankshaft.
3. Fasten Tool (B) to a hoist. Install the tool in the groove of flywheel (2) .
The weight of the flywheel is approximately 78 kg (172 lb).
4. Place flywheel (2) in position on Tools (A) .
Illustration 2 g00578492
Typical example
5. Apply clean engine oil or 5P-0960 Molybdenum Grease to the threads of bolts (2) .
6. Install six of the bolts.
2/3
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
26. 7. Remove Tools (A) and (B) .
8. Install the remainder of bolts (2) . Tighten all of the bolts to a torque of 270 ± 40 N·m (200
± 30 lb ft).
9. Check the runout of the flywheel.
Note: For information on checking for flywheel runout, refer to Testing and Adjusting,
"Flywheel-Inspect".
Note: For more detailed information regarding the flywheel, refer to Specifications, "Flywheel".
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Oct 11 14:00:31 UTC+0800 2021
3/3
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
GET MORE OTHER MANUALS https://www.aservicemanualpdf.com/
28. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D9L TRACK-TYPE TRACTOR 14Y
Configuration: D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE
Disassembly and Assembly
3408E and 3412E Engines for Caterpillar Built Machines
Media Number -SENR1013-11 Publication Date -01/07/2015 Date Updated -22/08/2016
i07051211
Crankshaft Rear Seal - Remove
SMCS - 1161-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7600 Slide Hammer Puller 1
Start By:
a. Remove the flywheel. Refer to Disassembly and Assembly, "Flywheel - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: Ensure that the rear gear remains in place when the crankshaft rear seal and
crankshaft wear sleeve are removed.
1. Install two bolts from the flywheel and suitable washers through the rear gear in the
crankshaft.
1/2
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
29. Illustration 1 g01195516
Illustration 2 g00515624
2. Use a punch or Tooling (A) to puncture a hole in seal assembly (1). Use Tooling (A) to
remove seal assembly (1).
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Oct 11 14:01:30 UTC+0800 2021
2/2
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
30. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D9L TRACK-TYPE TRACTOR 14Y
Configuration: D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE
Disassembly and Assembly
3408E and 3412E Engines for Caterpillar Built Machines
Media Number -SENR1013-11 Publication Date -01/07/2015 Date Updated -22/08/2016
i01493839
Crankshaft Rear Seal - Install
SMCS - 1161-012
Installation Procedure
Table 1
Required Tools for Engines with Rear Gear Train
Tool Part Number Part Description Qty
A
5P-7301 Locator 1
5P-7309 Bolt 2
5P-7310 Bolt 2
8T-2683 Seal Installer 1
9S-8858 Nut 1
Required Tools for Engines without Rear Gear Train
Tool Part Number Part Description Qty
B
5P-1733 Locator 1
5P-1737 Bolt 3
6V-6143 Seal Installer 1
9S-8858 Nut 1
NOTICE
Keep all parts clean from contaminants.
1/5
D9L TRACTOR 14Y00001-UP (MACHINE) POWERED BY 3412 ENGINE(SEBP1...
2021/10/11
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...