Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Core technology of Hyundai Motor Group's EV platform 'E-GMP'Hyundai Motor Group
What’s the force behind Hyundai Motor Group's EV performance and quality?
Maximized driving performance and quick charging time through high-density battery pack and fast charging technology and applicable to various vehicle types!
Discover more about Hyundai Motor Group’s EV platform ‘E-GMP’!
Things to remember while upgrading the brakes of your carjennifermiller8137
Upgrading the brakes of your car? Keep these things in mind before doing so. Additionally, start using an OBD 2 GPS tracker so that you never miss a vehicle maintenance appointment. On top of this, a car GPS tracker will also let you master good driving habits that will let you increase the operational life of your car’s brakes.
In this presentation, we have discussed a very important feature of BMW X5 cars… the Comfort Access. Things that can significantly limit its functionality. And things that you can try to restore the functionality of such a convenient feature of your vehicle.
Why Is Your BMW X3 Hood Not Responding To Release CommandsDart Auto
Experiencing difficulty opening your BMW X3's hood? This guide explores potential issues like mechanical obstruction, hood release mechanism failure, electrical problems, and emergency release malfunctions. Troubleshooting tips include basic checks, clearing obstructions, applying pressure, and using the emergency release.
5 Warning Signs Your BMW's Intelligent Battery Sensor Needs AttentionBertini's German Motors
IBS monitors and manages your BMW’s battery performance. If it malfunctions, you will have to deal with an array of electrical issues in your vehicle. Recognize warning signs like dimming headlights, frequent battery replacements, and electrical malfunctions to address potential IBS issues promptly.
Comprehensive program for Agricultural Finance, the Automotive Sector, and Empowerment . We will define the full scope and provide a detailed two-week plan for identifying strategic partners in each area within Limpopo, including target areas.:
1. Agricultural : Supporting Primary and Secondary Agriculture
• Scope: Provide support solutions to enhance agricultural productivity and sustainability.
• Target Areas: Polokwane, Tzaneen, Thohoyandou, Makhado, and Giyani.
2. Automotive Sector: Partnerships with Mechanics and Panel Beater Shops
• Scope: Develop collaborations with automotive service providers to improve service quality and business operations.
• Target Areas: Polokwane, Lephalale, Mokopane, Phalaborwa, and Bela-Bela.
3. Empowerment : Focusing on Women Empowerment
• Scope: Provide business support support and training to women-owned businesses, promoting economic inclusion.
• Target Areas: Polokwane, Thohoyandou, Musina, Burgersfort, and Louis Trichardt.
We will also prioritize Industrial Economic Zone areas and their priorities.
Sign up on https://profilesmes.online/welcome/
To be eligible:
1. You must have a registered business and operate in Limpopo
2. Generate revenue
3. Sectors : Agriculture ( primary and secondary) and Automative
Women and Youth are encouraged to apply even if you don't fall in those sectors.
What Exactly Is The Common Rail Direct Injection System & How Does It WorkMotor Cars International
Learn about Common Rail Direct Injection (CRDi) - the revolutionary technology that has made diesel engines more efficient. Explore its workings, advantages like enhanced fuel efficiency and increased power output, along with drawbacks such as complexity and higher initial cost. Compare CRDi with traditional diesel engines and discover why it's the preferred choice for modern engines.
What Does the PARKTRONIC Inoperative, See Owner's Manual Message Mean for You...Autohaus Service and Sales
Learn what "PARKTRONIC Inoperative, See Owner's Manual" means for your Mercedes-Benz. This message indicates a malfunction in the parking assistance system, potentially due to sensor issues or electrical faults. Prompt attention is crucial to ensure safety and functionality. Follow steps outlined for diagnosis and repair in the owner's manual.
Symptoms like intermittent starting and key recognition errors signal potential problems with your Mercedes’ EIS. Use diagnostic steps like error code checks and spare key tests. Professional diagnosis and solutions like EIS replacement ensure safe driving. Consult a qualified technician for accurate diagnosis and repair.
"Trans Failsafe Prog" on your BMW X5 indicates potential transmission issues requiring immediate action. This safety feature activates in response to abnormalities like low fluid levels, leaks, faulty sensors, electrical or mechanical failures, and overheating.
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
2. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6R II TRACK-TYPE TRACTOR BMK
Configuration: D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) POWERED BY C-9 ENGINE
Disassembly and Assembly
D6R Series II Track-Type Tractor Power Train
Media Number -RENR4257-03 Publication Date -01/08/2009 Date Updated -01/09/2009
i01618664
Final Drive - Disassemble
SMCS - 4050-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 3
A 1A-2029 Bolt 3
B 1P-510 Driver Group 1
C FT-1934 Beam 1
C 6V-3160 Cylinder 1
C 6V-9061 Pump Group 1
C 1D-4621 Bolt 4
D 138-7574 Link Bracket 2
D 2A-1538 Bolt 2
Start By:
A. Remove the final drives. Refer to Disassembly and Assembly, "Final Drive - Remove" for
the correct procedure.
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
mechanism.
1/6
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
3. Illustration 1 g00841087
1. Install Tooling (A) on the planetary carrier. Attach a hoist.
2. Remove bolts (1) that hold the planetary carrier to the hub. Remove planetary carrier (3) and
the two O-ring seals from the hub. The weight of the planetary carrier is approximately 137
kg (302 lb).
3. Remove three retainers (2) .
Illustration 2 g00841089
4. Place support under planetary carrier (3) in order to prevent damage. Use Tooling (B) and a
press to remove the three planetary gear shafts.
5. Remove three planetary gears (4) from carrier (3) .
2/6
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
4. Illustration 3 g00841091
6. Remove bearing cones (5) from each gear (4) .
7. Remove the bearing cups from each side of the gears.
Illustration 4 g00841092
Illustration 5 g00841093
8. Remove bolts (6) and retainer (7) .
3/6
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
5. 9. Use nylon straps and a hoist to remove the hub and ring gear (8). The weight of the hub and
ring gear (8) is approximately 68 kg (150 lb).
Illustration 6 g00841094
10. Turn over hub (9) and ring gear (8). Remove retaining ring (10). The weight of hub (9) is
approximately 37 kg (82 lb). The weight of ring gear (8) is approximately 32 kg (71 lb). Use
nylon straps and a hoist to remove hub (9) .
Illustration 7 g00841095
11. Install Tooling (C) on hub (12).
Note: Do not lift hub (12) too high. Do not allow hub (12) to contact the fitting on the
hydraulic cylinder.
12. Use Tooling (C) to loosen hub (12) from spindle (13). Remove Tooling (C) .
4/6
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
6. 13. Remove bearing cone (11) .
Illustration 8 g00841098
14. Install Tooling (D) and a hoist. Remove hub (12) from spindle (13). The weight of hub (12)
is approximately 180 kg (397 lb).
Illustration 9 g00841099
15. Turn over hub (12). Remove Duo-Cone seal kit (15). Use a hammer and a punch to remove
bearing cup (16) .
16. Turn over the hub. Remove bearing cup (14) from the hub.
Note: If the Duo-Cone seal kits will be reused, mark the seal kits for installation purposes.
5/6
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
7. Illustration 10 g00841101
Note: Bearing cone (18) may be damaged if the bearing cone is removed from spindle (13) .
17. Remove Duo-Cone seal kit (19) from spindle (13) .
18. If necessary, remove bearing cone (18) from the spindle.
19. Remove lip seal (17) from spindle (13) .
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Feb 1 01:14:52 UTC+0800 2021
6/6
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
8. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6R II TRACK-TYPE TRACTOR BMK
Configuration: D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) POWERED BY C-9 ENGINE
Disassembly and Assembly
D6R Series II Track-Type Tractor Power Train
Media Number -RENR4257-03 Publication Date -01/08/2009 Date Updated -01/09/2009
i01618668
Final Drive - Assemble
SMCS - 4050-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 3
A 1A-2029 Bolt 3
B 1P-510 Driver Group 1
D 138-7574 Link Bracket 2
D 2A-1538 Bolt 2
E 8M-9395 Installer 1
Note: Cleanliness is an important factor. Before assembly, all parts should be thoroughly cleaned
in cleaning fluid. Allow the parts to air dry. Wiping cloths or rags should not be used to dry parts.
Lint may be deposited on the parts which may cause later trouble. Inspect all parts. If any parts are
worn or damaged, use new parts for replacement.
1. Apply clean oil to all the parts during assembly.
1/7
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
9. Illustration 1 g00841209
2. Use Tooling (B) to install lip seal (17) in spindle (13). Put clean oil on the lip of the seal.
3. Heat bearing cone (18) to a maximum temperature of 135 °C (275 °F). Install bearing cone
(18) on spindle (13) .
Note: Before the installation of the Duo-Cone seal kit, refer to Disassembly and Assembly,
"Duo-Cone Floating Seals - Install" for the correct procedure.
4. Use Tooling (E) to install the Duo-Cone seal kit on spindle (13) .
Illustration 2 g00841210
5. Lower the temperature of bearing cups (14) and (16). Install bearing cups (14) and (16) in
hub (12) .
6. Use Tooling (E) to install the Duo-Cone seal in hub (12) .
2/7
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
10. Illustration 3 g00841211
7. Install Tooling (D) on hub (12). Attach a hoist to Tooling (D). Carefully position hub (12)
on spindle (13) .
Illustration 4 g00841212
8. Heat bearing cone (11) to a maximum temperature of 135°C (275°F). Install bearing cone
(11) on spindle (13).
3/7
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
11. Illustration 5 g00841094
9. Use nylon straps and a hoist to position hub (9) in gear (8). Install retaining ring (10) .
Illustration 6 g00841093
10. Turn over the hub and gear (8). Install nylon straps. Attach a hoist to the nylon straps. Use
the hoist and the nylon straps to put the hub and the gear into position in hub (12).
4/7
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
12. Illustration 7 g00841092
11. Put retainer (7) into position. Install bolts (6) while the hub is slowly rotated. Tighten bolts
(6) evenly to a torque of 135 ± 15 N·m (100 ± 11 lb ft). The retainer must contact the end of
spindle (13) after bolts (6) have been tightened.
Illustration 8 g00841213
12. Lower the temperature of bearing cups (20) and (21). Install the bearing cups in three
planetary gears (4) .
5/7
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
13. Illustration 9 g00841215
Illustration 10 g00841216
13. Position the planetary carrier in a press. Planetary shaft retainer (2) must be in position with
proper support in order to be a positive stop for the shaft.
NOTICE
The shaft must be correctly installed. If the shaft is incorrectly
installed, the bearing preload will be incorrect. This will result in
component damage.
14. Position planetary gear (4) in the planetary carrier.
15. Lower the temperature of shaft (22). Use a press to install the shaft in the planetary carrier.
After the installation, the end of shaft (22) must be flush with the retainer of the planetary
6/7
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
14. carrier. This will provide the correct bearing preload. The gear must rotate by hand after
installation. If the gear does not rotate, the problem must be corrected. Repeat this
procedure for all three shafts.
Illustration 11 g00841087
16. Install three retainers (2) on shafts (22) .
17. Install Tooling (A). Attach a hoist to Tooling (A). Install the two O-ring seals on the
planetary carrier. Align the drain hole in the planetary carrier with the drain hole in the hub.
18. Position the planetary carrier in the hub.
19. Install bolts (1) that hold planetary carrier (3) to the hub. Remove Tooling (A) .
End By: Install the final drives. Refer to Disassembly and Assembly, "Final Drive - Install" for
the correct procedure.
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Feb 1 01:15:51 UTC+0800 2021
7/7
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
15. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6R II TRACK-TYPE TRACTOR BMK
Configuration: D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) POWERED BY C-9 ENGINE
Disassembly and Assembly
D6R Series II Track-Type Tractor Power Train
Media Number -RENR4257-03 Publication Date -01/08/2009 Date Updated -01/09/2009
i03576221
Final Drive - Install
SMCS - 4050-012
Installation Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A FT-1952 Installer 1
B
8T-3207 Lifting Bracket 1
5P-8622 Shackle 1
1D-4593 5/8 - 11 by 5 1/2 bolt 2
4K-0367 5/8 - 11 by nut 2
5P-8248 Washer 4
1/4
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
16. Illustration 1 g00826743
1. Adjust the top bracket of Tooling (B) until Dimension (X) is 222.25 mm (8.750 inch).
Attach Tooling (B) to the final drive.
Illustration 2 g00865095
2. Use Tooling (B) to install final drive (1). The weight of final drive (1) is approximately
454 kg (1000 lb).
Illustration 3 g00865094
3. Install bolts (7) that hold the final drive and the steering clutch and brake together. Tighten
bolts (7) to a torque of 700 ± 90 N·m (516 ± 66 lb ft).
2/4
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
17. Illustration 4 g00865082
4. Remove Tooling (B) from the final drive.
Illustration 5 g00865077
5. Install two bolts (6) to the sprocket segment.
Illustration 6 g00865075
6. Install two bolts (5).
Illustration 7 g00865024
3/4
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
18. 7. Use Tooling (A) to install axle (4). Remove Tooling (A).
Note: Carefully install the axle shaft (4) into the final drive (1). It is possible that the axle
shaft (4) could damage the lip seal.
Illustration 8 g00865052
8. Install cover (3) and bolts (2) on final drive (1).
End By:
a. Connect the track. Refer to Disassembly and Assembly, "Track - Connect".
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Feb 1 01:16:50 UTC+0800 2021
4/4
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
19. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6R II TRACK-TYPE TRACTOR BMK
Configuration: D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) POWERED BY C-9 ENGINE
Disassembly and Assembly
D6R Series II Track-Type Tractor Power Train
Media Number -RENR4257-03 Publication Date -01/08/2009 Date Updated -01/09/2009
i01667141
Power Train Oil Filter - Remove
SMCS - 3067-011-FI
Removal Procedure
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1. Open the access cover.
1/2
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
20. Illustration 1 g00861043
2. Remove bolts (1). Remove cover assembly (2) from filter housing (3). Remove the filter.
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Feb 1 01:17:50 UTC+0800 2021
2/2
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
21. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6R II TRACK-TYPE TRACTOR BMK
Configuration: D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) POWERED BY C-9 ENGINE
Disassembly and Assembly
D6R Series II Track-Type Tractor Power Train
Media Number -RENR4257-03 Publication Date -01/08/2009 Date Updated -01/09/2009
i01618681
Power Train Oil Filter - Disassemble
SMCS - 3067-015
Disassembly Procedure
Start By:
A. Remove the power train oil filter. Refer to Disassembly and Assembly, "Power Train Oil
Filter - Remove" for the correct procedure.
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
mechanism.
Illustration 1 g00841304
1/2
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
22. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Remove switch (1), O-ring seal (2), plunger (3), and spring (5) from housing assembly (7) .
2. Remove plug (6) from the cover assembly.
3. Remove bolts (8) that hold cover (4) to the filter housing.
4. Remove plug (9) from the housing.
Illustration 2 g00841309
5. Remove locknut (13), retainer (10), the O-ring seal, element (11), stud (14), and two O-ring
seals (12) from cover (4) .
6. Inspect the O-ring seals. If necessary, replace the O-ring seals. Thoroughly clean all the
parts.
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Feb 1 01:18:49 UTC+0800 2021
2/2
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
23. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6R II TRACK-TYPE TRACTOR BMK
Configuration: D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) POWERED BY C-9 ENGINE
Disassembly and Assembly
D6R Series II Track-Type Tractor Power Train
Media Number -RENR4257-03 Publication Date -01/08/2009 Date Updated -01/09/2009
i01618687
Power Train Oil Filter - Assemble
SMCS - 3067-016-FI
Assembly Procedure
Illustration 1 g00841309
1. Install stud (14) into cover (4). Put element (11), retainer (10), the O-ring seal, and locknut
(13) in the correct position on the stud. Tighten locknut (13) to a torque of 14 ± 3 N·m (120
± 24 lb in).
2. Install O-ring seals (12) on cover (4) .
1/2
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
24. Illustration 2 g00841304
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
3. Put cover (4) in the correct position in housing (7). Install bolts (8) .
4. Install plug (6) in the cover.
5. Install plug (9) in the housing.
6. Install spring (5), plunger (3), O-ring seal (2), and switch (1) into housing (7) .
End By: Install the power train oil filter. Refer to Disassembly and Assembly, "Power Train Oil
Filter - Install" for the correct procedure.
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Feb 1 01:19:48 UTC+0800 2021
2/2
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
25. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6R II TRACK-TYPE TRACTOR BMK
Configuration: D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) POWERED BY C-9 ENGINE
Disassembly and Assembly
D6R Series II Track-Type Tractor Power Train
Media Number -RENR4257-03 Publication Date -01/08/2009 Date Updated -01/09/2009
i01667156
Power Train Oil Filter - Install
SMCS - 3067-012-FI
Installation Procedure
Note: Check the O-ring seal for wear and damage and replace the seals, if necessary.
Illustration 1 g00861043
1. Install the filter. Install cover assembly (2) in filter housing (3). Install bolts (1) .
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Feb 1 01:20:48 UTC+0800 2021
1/1
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
26. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6R II TRACK-TYPE TRACTOR BMK
Configuration: D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) POWERED BY C-9 ENGINE
Disassembly and Assembly
D6R Series II Track-Type Tractor Power Train
Media Number -RENR4257-03 Publication Date -01/08/2009 Date Updated -01/09/2009
i01676955
Power Train Oil Pump - Remove
SMCS - 3066-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 8S-9906 Ratchet Puller 1
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
mechanism.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1. Remove the floorplates.
1/5
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
27. Illustration 1 g00865718
2. Remove bolt (1) .
Illustration 2 g00865724
3. Disconnect tube assembly (2). Disconnect manifold (3). Position tube assembly (2) and
manifold (3) out of the way.
2/5
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
29. Illustration 6 g00865840
7. Remove bolts (11) from both drive coupling (12). Remove both drive couplings (12) .
Illustration 7 g00865844
8. Slide shaft (13) out of the drive. Remove guard bolts (14). Remove guard (15) .
Illustration 8 g00865846
9. Remove two bolts (16) from suction tube (17) .
4/5
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
30. Illustration 9 g00865850
10. Attach a chain to the cab roof. Install Tooling (A) .
Illustration 10 g00865891
11. Remove bolt (18) and the nut from the back side of power train oil pump (21). Remove bolt
(19). Attach a lifting sling to Tooling (A) and to power train oil pump (21). Remove
mounting nut (20). Remove power train oil pump (21). The weight of power train oil pump
(21) is approximately 41 kg (90 lb).
Copyright 1993 - 2021 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Mon Feb 1 01:21:47 UTC+0800 2021
5/5
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
31. Suggest:
If the above button click is invalid.
Please download this document
first, and then click the above link
to download the complete manual.
Thank you so much for reading
32. Shutdown SIS
Previous Screen
Product: TRACK-TYPE TRACTOR
Model: D6R II TRACK-TYPE TRACTOR BMK
Configuration: D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) POWERED BY C-9 ENGINE
Disassembly and Assembly
D6R Series II Track-Type Tractor Power Train
Media Number -RENR4257-03 Publication Date -01/08/2009 Date Updated -01/09/2009
i01669181
Power Train Oil Pump - Disassemble
SMCS - 3066-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A
1P-0510 Driver 1
8H-0663 Bearing Puller 1
B 1P-0510 Driver 1
Start By:
A. Remove the power train oil pump. Refer to Disassembly and Assembly, "Power Train Oil
Pump - Remove".
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1/8
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...
33. Illustration 1 g00810958
1. Remove these components from the power train oil pump: switch (1), bolts (2) and manifold
(3) .
Illustration 2 g00810989
2. Remove bolts (5) and remove flange (4) with the cage from the pump.
2/8
D6R SERIES II TRACK-TYPE TRACTOR FTC STD BMK00501-UP (MACHINE) ...
2021/2/1
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisw...