The document provides instructions for removing and disassembling the transmission of a 416E backhoe loader. The removal process involves draining fluids, disconnecting wiring harnesses and hydraulic lines, and removing mounting hardware. The transmission is then lifted out of the machine. Disassembly separates the transmission into its major components like the torque converter, pump group, and valve groups through removal of mounting bolts and seals.
Caterpillar cat 416 e backhoe loader (prefix sha) service repair manual (sha0...ujjfjkskekmme
The document provides instructions for removing and disassembling the transmission of a 416E backhoe loader. The removal process involves draining fluids, disconnecting wiring harnesses and hydraulic lines, and removing mounting hardware. The transmission is then lifted out of the machine. Disassembly separates the transmission into its major components like the torque converter, pump group, and valve groups through removal of mounting bolts and seals.
Caterpillar cat 426 c backhoe loader (prefix 7wn) service repair manual (7wn0...ufdjjsekkmdme
This document provides instructions for servicing various components of a Caterpillar 426C BACKHOE LOADER, including removing and installing the steering cylinder, air conditioner compressor group, air conditioner filter, and full air conditioner system. Safety precautions are outlined, such as containing fluids, wearing protective equipment when working with refrigerants, and referring to additional manuals for purging and charging procedures. The procedures provide a list of removal and installation steps that include disconnecting hoses and lines, removing mounting bolts, and reversing the process for reinstallation.
Caterpillar cat 345 b l excavator (prefix 9cw) service repair manual (9cw0000...fjsekdmmeed
This document provides instructions for removing and installing a cylinder head on a Caterpillar 345B L excavator engine. It details removing components like the valve mechanism cover, rocker shaft, and pushrods. It then explains how to remove the cylinder head by disconnecting sensors and tubes, and removing bolts. Reinstallation involves cleaning surfaces, installing new gaskets and seals, tightening bolts in a specific sequence, and reconnecting all removed components and hoses. Tools required are also listed.
Caterpillar cat 345 b excavator (prefix 8kw) service repair manual (8kw00001 ...fjsekdmmeed
This document provides instructions for removing and installing a cylinder head on a 345B excavator engine. It includes 14 steps to remove the head, such as removing sensors, tubes, and bolts. The 20 step installation procedure describes cleaning surfaces, installing gaskets and seals, tightening bolts in a specific sequence, and reconnecting related components like sensors and tubes. Special tools are listed for tasks like removing the fuel filter. Cautions are provided about containing fluids and keeping parts clean to prevent damage and wear.
Caterpillar cat 312 b excavator (prefix 8jr) service repair manual (8jr00001 ...fjsekksmemm
The documents provide instructions for servicing components of the engine in a 312B L excavator. It describes how to disassemble, inspect, and reassemble the water pump. The instructions include removing the water pump from the engine, disassembling it into individual parts like the impeller and shaft, inspecting parts for wear, replacing the seal if needed, and reassembling the water pump using the appropriate tools and specifications. Proper cleanup and installation procedures are emphasized to prevent contamination.
Caterpillar cat 320 c l 320cl excavator (prefix gla) service repair manual (...ujjdfjkskdme
The document provides instructions for disassembling a swing drive component from an excavator. It involves 29 steps, including removing gears, carriers, retaining rings, seals and other parts from the housing. Cleanliness is important to prevent contaminating the hydraulic system. Tools include retaining ring pliers, drivers and presses. The process separates all internal components to allow inspection and replacement of parts.
Caterpillar cat 436 c backhoe loader (prefix 8tn) service repair manual (8tn0...fusjejfskekfmsme
The document provides instructions for removing and installing camshaft bearings on a Caterpillar 3054 engine:
1. Remove the camshaft and clean the bearing areas before removing the old bearings.
2. Press or drive out the old bearings and inspect them for wear or damage.
3. Lubricate the new bearings, press or drive them into place, and check that they rotate freely without play or restriction.
Caterpillar cat 420 e backhoe loader (prefix dan) service repair manual (dan0...ujjfjkskekmme
The document provides instructions for removing and installing the lift cylinder and lift arms on a 420E backhoe loader. Key steps include:
1. Release hydraulic pressure and remove hoses from the lift cylinder before removing it from the lift arms.
2. Use retaining ring pliers and a lifting device to remove the lift cylinder, noting any shims.
3. Disconnect hoses, remove the bucket and tilt cylinder, then use a lever puller and lifting device to remove the lift arms from the machine.
Caterpillar cat 416 e backhoe loader (prefix sha) service repair manual (sha0...ujjfjkskekmme
The document provides instructions for removing and disassembling the transmission of a 416E backhoe loader. The removal process involves draining fluids, disconnecting wiring harnesses and hydraulic lines, and removing mounting hardware. The transmission is then lifted out of the machine. Disassembly separates the transmission into its major components like the torque converter, pump group, and valve groups through removal of mounting bolts and seals.
Caterpillar cat 426 c backhoe loader (prefix 7wn) service repair manual (7wn0...ufdjjsekkmdme
This document provides instructions for servicing various components of a Caterpillar 426C BACKHOE LOADER, including removing and installing the steering cylinder, air conditioner compressor group, air conditioner filter, and full air conditioner system. Safety precautions are outlined, such as containing fluids, wearing protective equipment when working with refrigerants, and referring to additional manuals for purging and charging procedures. The procedures provide a list of removal and installation steps that include disconnecting hoses and lines, removing mounting bolts, and reversing the process for reinstallation.
Caterpillar cat 345 b l excavator (prefix 9cw) service repair manual (9cw0000...fjsekdmmeed
This document provides instructions for removing and installing a cylinder head on a Caterpillar 345B L excavator engine. It details removing components like the valve mechanism cover, rocker shaft, and pushrods. It then explains how to remove the cylinder head by disconnecting sensors and tubes, and removing bolts. Reinstallation involves cleaning surfaces, installing new gaskets and seals, tightening bolts in a specific sequence, and reconnecting all removed components and hoses. Tools required are also listed.
Caterpillar cat 345 b excavator (prefix 8kw) service repair manual (8kw00001 ...fjsekdmmeed
This document provides instructions for removing and installing a cylinder head on a 345B excavator engine. It includes 14 steps to remove the head, such as removing sensors, tubes, and bolts. The 20 step installation procedure describes cleaning surfaces, installing gaskets and seals, tightening bolts in a specific sequence, and reconnecting related components like sensors and tubes. Special tools are listed for tasks like removing the fuel filter. Cautions are provided about containing fluids and keeping parts clean to prevent damage and wear.
Caterpillar cat 312 b excavator (prefix 8jr) service repair manual (8jr00001 ...fjsekksmemm
The documents provide instructions for servicing components of the engine in a 312B L excavator. It describes how to disassemble, inspect, and reassemble the water pump. The instructions include removing the water pump from the engine, disassembling it into individual parts like the impeller and shaft, inspecting parts for wear, replacing the seal if needed, and reassembling the water pump using the appropriate tools and specifications. Proper cleanup and installation procedures are emphasized to prevent contamination.
Caterpillar cat 320 c l 320cl excavator (prefix gla) service repair manual (...ujjdfjkskdme
The document provides instructions for disassembling a swing drive component from an excavator. It involves 29 steps, including removing gears, carriers, retaining rings, seals and other parts from the housing. Cleanliness is important to prevent contaminating the hydraulic system. Tools include retaining ring pliers, drivers and presses. The process separates all internal components to allow inspection and replacement of parts.
Caterpillar cat 436 c backhoe loader (prefix 8tn) service repair manual (8tn0...fusjejfskekfmsme
The document provides instructions for removing and installing camshaft bearings on a Caterpillar 3054 engine:
1. Remove the camshaft and clean the bearing areas before removing the old bearings.
2. Press or drive out the old bearings and inspect them for wear or damage.
3. Lubricate the new bearings, press or drive them into place, and check that they rotate freely without play or restriction.
Caterpillar cat 420 e backhoe loader (prefix dan) service repair manual (dan0...ujjfjkskekmme
The document provides instructions for removing and installing the lift cylinder and lift arms on a 420E backhoe loader. Key steps include:
1. Release hydraulic pressure and remove hoses from the lift cylinder before removing it from the lift arms.
2. Use retaining ring pliers and a lifting device to remove the lift cylinder, noting any shims.
3. Disconnect hoses, remove the bucket and tilt cylinder, then use a lever puller and lifting device to remove the lift arms from the machine.
The document provides instructions for disassembling a transmission (power shift) from a 416E Backhoe Loader. It lists required tools and outlines 25 steps to remove the transmission, including draining fluids, disconnecting electrical and hydraulic connections, removing mounting hardware, and lifting the transmission off with a hydraulic jack. The transmission weighs approximately 255 kg (562 lb) and special care must be taken when handling it and containing any fluids.
This document provides instructions for removing and disassembling the transmission of a 416E backhoe loader. The removal procedure involves draining fluids, disconnecting wiring harnesses and hoses, and removing mounting hardware. Major components that can be removed from the transmission once it is off the vehicle include the torque converter, gear, pump group, shaft, and solenoid valve assemblies. Cleaning the exterior of components before disassembly is also noted as important.
This document provides instructions for removing and disassembling the transmission of a 416E Backhoe Loader. The removal procedure involves draining fluids, disconnecting wiring harnesses and hoses, and removing mounting hardware. Major components that can be removed from the transmission once it is off the vehicle include the torque converter, gear, pump group, shaft, and solenoid valve assemblies. Cleaning the exterior of components before disassembly is also noted as important.
The document provides instructions for disassembling a transmission (power shift) from a 416E Backhoe Loader. It lists required tools and outlines 25 steps to remove the transmission, including draining fluids, disconnecting electrical and hydraulic connections, removing mounting hardware, and lifting the transmission off with a hydraulic jack. The transmission weighs approximately 255 kg (562 lb) and special care must be taken when handling it and containing any fluids.
This document provides instructions for removing and disassembling the transmission of a 416E backhoe loader. The removal procedure involves draining fluids, disconnecting wiring harnesses and hoses, and removing mounting hardware. Major components that can be removed from the transmission once it is off the vehicle include the torque converter, pump group, gears, shafts, and solenoid valves. Cleanliness is important during disassembly to prevent contamination.
This document provides instructions for removing and disassembling the transmission of a 416E backhoe loader. The removal procedure involves draining fluids, disconnecting wiring harnesses and hoses, and removing mounting hardware. Major components that can be removed from the transmission once it is off the vehicle include the torque converter, gear, pump group, shaft, and solenoid valve assemblies. Cleaning the exterior of components before disassembly is also noted as important.
The document provides instructions for disassembling a transmission (power shift) from a 416E Backhoe Loader. It lists required tools and outlines 25 steps to remove the transmission, including draining fluids, disconnecting electrical and hydraulic connections, removing mounting hardware, and lifting the transmission off with a hydraulic jack. The transmission weighs approximately 255 kg (562 lb) and special care must be taken when handling it and containing any fluids.
This document provides instructions for removing and disassembling the transmission of a 416E Backhoe Loader. The removal procedure involves draining fluids, disconnecting wiring harnesses and hoses, and removing mounting hardware. Major components that can be removed from the transmission once it is off the vehicle include the torque converter, gear, pump group, shaft, and solenoid valve assemblies. Cleaning the exterior of components before disassembly is also noted as important.
This document provides instructions for removing and disassembling the transmission of a 416E backhoe loader. The removal procedure involves draining fluids, disconnecting wiring harnesses and hoses, and removing mounting hardware. Major components that can be removed from the transmission once it is off the vehicle include the torque converter, gear, pump group, shaft, and solenoid valve assemblies. Cleaning the exterior of components before disassembly is noted as important to prevent dirt from entering the internal mechanisms.
Caterpillar cat 414 e backhoe loader (prefix elb) service repair manual (elb0...fksuekdjsekmmd
1) The document provides step-by-step instructions for disassembling and removing the transmission from several backhoe loader models, including the 414E.
2) Over 25 steps are outlined to remove the transmission, involving draining fluids, removing connecting parts and harness assemblies, and using various tools to support the engine and lift the transmission.
3) Detailed illustrations accompany each step to show the specific components and order of disassembly.
Caterpillar cat 414 e backhoe loader (prefix elb) service repair manual (elb0...fujskksemmk
1) The document provides step-by-step instructions for disassembling the transmission of a 414E Backhoe Loader. It details removing the transmission from the machine and then dismantling it into its major components.
2) The transmission is first removed from the machine by draining fluids, disconnecting wiring harnesses and hoses, and removing mounting bolts and shafts. It is then taken off using a hydraulic jack.
3) The major steps of disassembling the transmission include removing the torque converter, pump group, valve groups, output yokes, seals and gaskets. Special tools are required to remove some components. Cleanliness is important during disassembly.
Caterpillar cat 414 e backhoe loader (prefix elb) service repair manual (elb0...udfjjsekkemm
The document provides instructions for removing and disassembling the transmission of a 414E Backhoe Loader. It lists the required tools and gives step-by-step details on removing the transmission from the machine and then disassembling the major components. These include removing the torque converter, pump group, shafts, valve groups, output yokes, case assembly, and other internal parts. Detailed illustrations accompany each step.
Caterpillar cat 414 e backhoe loader (prefix elb) service repair manual (elb0...ujsefksmemtyu
The document provides instructions for removing and disassembling the transmission of a 414E Backhoe Loader. It lists the required tools and gives step-by-step details on removing the transmission from the machine and then disassembling the major components. These include removing the torque converter, pump group, shafts, valve groups, output yokes, case assembly, and other internal parts. Detailed illustrations accompany each step.
Caterpillar cat 414 e backhoe loader (prefix elb) service repair manual (elb0...fuujsjejkekmd
The document provides instructions for removing and disassembling the transmission of a 414E Backhoe Loader. It lists the required tools and gives step-by-step details on removing the transmission from the machine and then disassembling the major components. These include removing the torque converter, pump group, shafts, valve groups, output yokes, case assembly, and other internal parts. Detailed illustrations accompany each step.
The document provides step-by-step instructions for removing and disassembling the transmission from a 414E Backhoe Loader. It details removing hydraulic lines and electrical connections, draining fluids, and using various tools to separate major components like the torque converter, pump group, valve groups, and output yokes. Cleanliness is important during disassembly to prevent contamination of internal parts.
The document is a service repair manual that provides instructions for removing the transmission from a 414E Backhoe Loader. It includes 25 steps to disassemble the transmission into its major components. Tools required are listed in Table 1. The transmission is first removed from the loader according to another section of the manual. Then components like the torque converter, pump group, shafts, and case assembly are dismantled. Precautions around cleanliness and recording shim measurements are noted to aid reassembly.
The document is a service repair manual that provides instructions for removing the transmission from a 414E Backhoe Loader. It includes 25 steps to disassemble the transmission into its major components. Tools required are listed in Table 1. Safety precautions are noted to contain fluids and properly dispose of them. Detailed illustrations accompany each step to identify parts and guide the process.
The document is a service repair manual that provides instructions for removing the transmission from a 414E Backhoe Loader. It includes 25 steps to disassemble the transmission into its major components. Tools required are listed in Table 1. The transmission is first removed from the loader according to another section of the manual. Then components like the torque converter, pump group, shafts, and case assembly are dismantled. Precautions around cleanliness and recording shim measurements are noted to aid reassembly.
The document is a service repair manual that provides instructions for removing the transmission from a 414E Backhoe Loader. It gives a list of required tools and provides 25 steps with accompanying illustrations to disassemble the transmission into its major components. These components include the torque converter, pump group, valve groups, output yoke assemblies, case assembly, shafts, and more. Precautions are noted such as cleaning components before disassembly and recording shim measurements.
The document is a service repair manual that provides instructions for removing the transmission from a 414E Backhoe Loader. It includes 25 steps to disassemble the transmission into its major components. Tools required are listed in Table 1. Safety precautions are noted to contain fluids and properly dispose of them. Detailed illustrations accompany each step to identify parts and aid in reassembly.
New holland l228 tier 4 b (final) europe skid steer loader service repair manualfjsjfkskefmem
This document provides service information for Tier 4B engines used in New Holland C227, C232, L221, and L228 skid steer and compact track loaders. It contains over 150 sections covering the engine and all related systems, with detailed removal and installation instructions. Safety precautions are provided throughout regarding handling heavy components, draining fluids, battery and refrigerant handling.
New holland cx720 combine harvesters service repair manualfjsjfkskefmem
The document provides an overview and component locations of the primary hydraulic power system for a New Holland agricultural vehicle. The system uses a closed-center load sensing pump to supply oil to circuits for steering, header height control, straw elevator functions, lateral flotation, reel adjustment, and unloading tube control. Key components include hydraulic pumps and motors, valves, cylinders, filters, accumulators, and manifolds.
More Related Content
Similar to Caterpillar cat 416 e backhoe loader (prefix sha) service repair manual (sha00001 up)
The document provides instructions for disassembling a transmission (power shift) from a 416E Backhoe Loader. It lists required tools and outlines 25 steps to remove the transmission, including draining fluids, disconnecting electrical and hydraulic connections, removing mounting hardware, and lifting the transmission off with a hydraulic jack. The transmission weighs approximately 255 kg (562 lb) and special care must be taken when handling it and containing any fluids.
This document provides instructions for removing and disassembling the transmission of a 416E backhoe loader. The removal procedure involves draining fluids, disconnecting wiring harnesses and hoses, and removing mounting hardware. Major components that can be removed from the transmission once it is off the vehicle include the torque converter, gear, pump group, shaft, and solenoid valve assemblies. Cleaning the exterior of components before disassembly is also noted as important.
This document provides instructions for removing and disassembling the transmission of a 416E Backhoe Loader. The removal procedure involves draining fluids, disconnecting wiring harnesses and hoses, and removing mounting hardware. Major components that can be removed from the transmission once it is off the vehicle include the torque converter, gear, pump group, shaft, and solenoid valve assemblies. Cleaning the exterior of components before disassembly is also noted as important.
The document provides instructions for disassembling a transmission (power shift) from a 416E Backhoe Loader. It lists required tools and outlines 25 steps to remove the transmission, including draining fluids, disconnecting electrical and hydraulic connections, removing mounting hardware, and lifting the transmission off with a hydraulic jack. The transmission weighs approximately 255 kg (562 lb) and special care must be taken when handling it and containing any fluids.
This document provides instructions for removing and disassembling the transmission of a 416E backhoe loader. The removal procedure involves draining fluids, disconnecting wiring harnesses and hoses, and removing mounting hardware. Major components that can be removed from the transmission once it is off the vehicle include the torque converter, pump group, gears, shafts, and solenoid valves. Cleanliness is important during disassembly to prevent contamination.
This document provides instructions for removing and disassembling the transmission of a 416E backhoe loader. The removal procedure involves draining fluids, disconnecting wiring harnesses and hoses, and removing mounting hardware. Major components that can be removed from the transmission once it is off the vehicle include the torque converter, gear, pump group, shaft, and solenoid valve assemblies. Cleaning the exterior of components before disassembly is also noted as important.
The document provides instructions for disassembling a transmission (power shift) from a 416E Backhoe Loader. It lists required tools and outlines 25 steps to remove the transmission, including draining fluids, disconnecting electrical and hydraulic connections, removing mounting hardware, and lifting the transmission off with a hydraulic jack. The transmission weighs approximately 255 kg (562 lb) and special care must be taken when handling it and containing any fluids.
This document provides instructions for removing and disassembling the transmission of a 416E Backhoe Loader. The removal procedure involves draining fluids, disconnecting wiring harnesses and hoses, and removing mounting hardware. Major components that can be removed from the transmission once it is off the vehicle include the torque converter, gear, pump group, shaft, and solenoid valve assemblies. Cleaning the exterior of components before disassembly is also noted as important.
This document provides instructions for removing and disassembling the transmission of a 416E backhoe loader. The removal procedure involves draining fluids, disconnecting wiring harnesses and hoses, and removing mounting hardware. Major components that can be removed from the transmission once it is off the vehicle include the torque converter, gear, pump group, shaft, and solenoid valve assemblies. Cleaning the exterior of components before disassembly is noted as important to prevent dirt from entering the internal mechanisms.
Caterpillar cat 414 e backhoe loader (prefix elb) service repair manual (elb0...fksuekdjsekmmd
1) The document provides step-by-step instructions for disassembling and removing the transmission from several backhoe loader models, including the 414E.
2) Over 25 steps are outlined to remove the transmission, involving draining fluids, removing connecting parts and harness assemblies, and using various tools to support the engine and lift the transmission.
3) Detailed illustrations accompany each step to show the specific components and order of disassembly.
Caterpillar cat 414 e backhoe loader (prefix elb) service repair manual (elb0...fujskksemmk
1) The document provides step-by-step instructions for disassembling the transmission of a 414E Backhoe Loader. It details removing the transmission from the machine and then dismantling it into its major components.
2) The transmission is first removed from the machine by draining fluids, disconnecting wiring harnesses and hoses, and removing mounting bolts and shafts. It is then taken off using a hydraulic jack.
3) The major steps of disassembling the transmission include removing the torque converter, pump group, valve groups, output yokes, seals and gaskets. Special tools are required to remove some components. Cleanliness is important during disassembly.
Caterpillar cat 414 e backhoe loader (prefix elb) service repair manual (elb0...udfjjsekkemm
The document provides instructions for removing and disassembling the transmission of a 414E Backhoe Loader. It lists the required tools and gives step-by-step details on removing the transmission from the machine and then disassembling the major components. These include removing the torque converter, pump group, shafts, valve groups, output yokes, case assembly, and other internal parts. Detailed illustrations accompany each step.
Caterpillar cat 414 e backhoe loader (prefix elb) service repair manual (elb0...ujsefksmemtyu
The document provides instructions for removing and disassembling the transmission of a 414E Backhoe Loader. It lists the required tools and gives step-by-step details on removing the transmission from the machine and then disassembling the major components. These include removing the torque converter, pump group, shafts, valve groups, output yokes, case assembly, and other internal parts. Detailed illustrations accompany each step.
Caterpillar cat 414 e backhoe loader (prefix elb) service repair manual (elb0...fuujsjejkekmd
The document provides instructions for removing and disassembling the transmission of a 414E Backhoe Loader. It lists the required tools and gives step-by-step details on removing the transmission from the machine and then disassembling the major components. These include removing the torque converter, pump group, shafts, valve groups, output yokes, case assembly, and other internal parts. Detailed illustrations accompany each step.
The document provides step-by-step instructions for removing and disassembling the transmission from a 414E Backhoe Loader. It details removing hydraulic lines and electrical connections, draining fluids, and using various tools to separate major components like the torque converter, pump group, valve groups, and output yokes. Cleanliness is important during disassembly to prevent contamination of internal parts.
The document is a service repair manual that provides instructions for removing the transmission from a 414E Backhoe Loader. It includes 25 steps to disassemble the transmission into its major components. Tools required are listed in Table 1. The transmission is first removed from the loader according to another section of the manual. Then components like the torque converter, pump group, shafts, and case assembly are dismantled. Precautions around cleanliness and recording shim measurements are noted to aid reassembly.
The document is a service repair manual that provides instructions for removing the transmission from a 414E Backhoe Loader. It includes 25 steps to disassemble the transmission into its major components. Tools required are listed in Table 1. Safety precautions are noted to contain fluids and properly dispose of them. Detailed illustrations accompany each step to identify parts and guide the process.
The document is a service repair manual that provides instructions for removing the transmission from a 414E Backhoe Loader. It includes 25 steps to disassemble the transmission into its major components. Tools required are listed in Table 1. The transmission is first removed from the loader according to another section of the manual. Then components like the torque converter, pump group, shafts, and case assembly are dismantled. Precautions around cleanliness and recording shim measurements are noted to aid reassembly.
The document is a service repair manual that provides instructions for removing the transmission from a 414E Backhoe Loader. It gives a list of required tools and provides 25 steps with accompanying illustrations to disassemble the transmission into its major components. These components include the torque converter, pump group, valve groups, output yoke assemblies, case assembly, shafts, and more. Precautions are noted such as cleaning components before disassembly and recording shim measurements.
The document is a service repair manual that provides instructions for removing the transmission from a 414E Backhoe Loader. It includes 25 steps to disassemble the transmission into its major components. Tools required are listed in Table 1. Safety precautions are noted to contain fluids and properly dispose of them. Detailed illustrations accompany each step to identify parts and aid in reassembly.
Similar to Caterpillar cat 416 e backhoe loader (prefix sha) service repair manual (sha00001 up) (20)
New holland l228 tier 4 b (final) europe skid steer loader service repair manualfjsjfkskefmem
This document provides service information for Tier 4B engines used in New Holland C227, C232, L221, and L228 skid steer and compact track loaders. It contains over 150 sections covering the engine and all related systems, with detailed removal and installation instructions. Safety precautions are provided throughout regarding handling heavy components, draining fluids, battery and refrigerant handling.
New holland cx720 combine harvesters service repair manualfjsjfkskefmem
The document provides an overview and component locations of the primary hydraulic power system for a New Holland agricultural vehicle. The system uses a closed-center load sensing pump to supply oil to circuits for steering, header height control, straw elevator functions, lateral flotation, reel adjustment, and unloading tube control. Key components include hydraulic pumps and motors, valves, cylinders, filters, accumulators, and manifolds.
New holland cs540 combine harvesters service repair manualfjsjfkskefmem
This document is a repair manual for New Holland agricultural equipment models CS520, CS540, CS640, CS660, and CL560. It contains sections on the machines' distribution systems, power production, power train, travelling systems, body and structure, tool positioning, and crop processing. The sections contain chapters that provide technical data, functional descriptions, diagnostic information, and service procedures for the machines' components and systems. The manual uses a coding system to uniquely identify each piece of technical information and allow users to easily search for the specific information they need.
New holland cr7.90 combine harvesters service repair manualfjsjfkskefmem
This document is a service manual for CNH Industrial combine harvesters and covers models CX7.80 through CR10.90. It contains over 200 sections on the various systems of the combines, including the engine, transmission, hydraulics, electrical systems, attachments and more. Safety guidelines are provided at the beginning emphasizing disengaging machinery, reducing pressures, and using proper protective equipment during maintenance.
New holland c227 tier 4 b final [ndm471836 ]north america compact track load...fjsjfkskefmem
This document is a service manual for New Holland C227, C232, L221, and L228 compact track loaders and skid steer loaders that comply with Tier 4B emissions standards. It contains sections covering the engine, power coupling, front and rear axle systems, hydrostatic drive, brakes and controls, hydraulic systems, frames and ballasting, wheels, tracks and track suspension, cab climate control, electrical systems, front loader and bucket, platform, cab, bodywork, and decals. Safety and environmental rules are also provided regarding the handling and disposal of fluids, fuels, and other materials.
Caterpillar cat d4 e track tractor service repair manual (77w01664 and up)fjsjfkskefmem
This document provides instructions for removing and installing a fuel priming pump on a Caterpillar D4E track-type tractor with a 3304 engine. The removal procedure involves turning off the fuel supply line valve, removing bolts and washers to detach the pump from its base, disconnecting a tube assembly, and removing two bolts to detach the base from the cylinder block. The installation procedure is the reverse of removal. Proper cleanliness and containment of fluids is emphasized.
Caterpillar cat d4 e track tractor (prefix 68x) service repair manual (68x007...fjsjfkskefmem
The document provides instructions for removing and installing the fuel priming pump, removing and installing the fuel filter base, removing the fuel transfer pump, and disassembling the fuel transfer pump on a Caterpillar D4E track-type tractor with a 3304 engine. The procedures include illustrations and describe disconnecting fuel lines, removing bolts and parts, checking gaskets, and containing fluids.
Caterpillar cat d4 e track tractor (prefix 68x) service repair manual (68x000...fjsjfkskefmem
This document provides instructions for removing and disassembling fuel system components on a Caterpillar D4E track-type tractor with a 3304 engine. The procedures include:
1. Removing the fuel priming pump by taking off bolts, washers and a gasket.
2. Removing the fuel filter base by disconnecting a fuel line, removing bolts and washers, and taking off a gasket.
3. Disassembling the fuel transfer pump by removing tubes, bolts, an O-ring seal, and taking apart the pump housing, piston, springs, and valves.
Caterpillar cat d4 e track tractor (prefix 2cb) service repair manual (2cb000...fjsjfkskefmem
This document provides instructions for removing and disassembling the fuel injection pump housing and governor from a Caterpillar D4E track-type tractor powered by a 3304 engine. The removal procedure involves disconnecting fuel lines and other components, then using lifting equipment to remove the housing. The disassembly process describes removing various parts like covers, lifters, bearings, and the camshaft from the housing. The assembly section outlines installing bearings, the camshaft, washer and other parts back into the housing.
Caterpillar cat e70 b excavator (prefix 5tg) service repair manual (5tg00001 ...fjsjfkskefmem
This document provides service information for the travel drive and motor of an E70B excavator model. It includes three pages of specifications and diagrams of the excavator's components. The bulk of the document describes the functional construction and operating principles of the travel drive and motor system. It explains how the swash plate motor, counter-balance valve, parking brake, and reduction gears work together to convert hydraulic pressure into rotational force to power the tracks and control travel speed.
The document provides instructions for properly installing Duo-Cone seals. It describes the components of a Duo-Cone seal and the assembly process. Critical steps include cleaning and inspecting the seal ring, rubber toric, and housing to ensure they are free of contamination or damage before installation. The seal ring and toric must be aligned and installed within specified tolerances to prevent leaks.
Caterpillar cat d6 r track tractor (prefix 7gr) service repair manual (7gr000...fjsjfkskefmem
This document provides instructions for removing and installing a bulldozer blade on a D6R track-type tractor. It lists the required tools and safety precautions. The removal process involves disconnecting hydraulic hoses, removing caps and bolts from the lift cylinders and stabilizer link, and using tooling to support the push arms. Reinstallation is the reverse of the removal process.
Caterpillar cat 3054 c industrial engine (prefix 334) service repair manual (...fjsjfkskefmem
- The document provides installation instructions for a fuel injection pump on a 3054C industrial engine.
- It describes 11 steps for installing the pump, including installing seals, bolts, gears, tubes and ensuring proper timing.
- Proper installation of the spacer and tightening of bolts is emphasized to prevent contact with the pump shaft.
Caterpillar cat d5 htsk ii track skidder (prefix 7eg) service repair manual (...fjsjfkskefmem
This document provides instructions for servicing the valves, valve guides, valve seat inserts, water directors, pistons, and connecting rods of a D5H Track-Type Skidder Series II engine. It describes how to remove and install these components, noting identification marks, cleaning, lubrication steps, and proper tool usage. Removal involves disassembling the engine down to the cylinder block, while installation requires reassembling components in the reverse order. Precautions are provided to prevent damage during disassembly and assembly.
Caterpillar cat 973 c track loader (prefix ldx) service repair manual (ldx000...fjsjfkskefmem
This document provides instructions for servicing the air conditioning and heating system and turbocharger on a 973C track loader with a C9 engine. It describes safety precautions when working on the refrigerant system and notes to keep all parts clean. Steps are outlined for removing and installing the turbocharger and exhaust manifold.
Caterpillar cat d5 b track tractor (prefix 46x) service repair manual (46x000...fjsjfkskefmem
This service repair manual provides instructions for repairing D5B track tractors with 3306 engines. It describes removing and installing various engine components like the front housing, valve mechanism cover, and gear group in the front of the engine. The procedures provide details on required tools, cleaning parts, applying sealants, and proper torque specifications for reinstallation.
Caterpillar cat 951 c track loader (prefix 86j) service repair manual (86j040...fjsjfkskefmem
- The document provides instructions for disassembling and assembling starting motors for Caterpillar track loaders and excavators.
- It describes removing over a dozen parts from the starting motor housing, including the rear housing, brushes, field winding coils, and pinion drive components.
- Cleaning and inspection steps are included to check all parts for wear and damage before reassembling the starting motor.
Caterpillar cat d4 htsk iii track skidder (prefix 7pk) service repair manual ...fjsjfkskefmem
This document provides instructions for servicing the cylinder head assembly of a Caterpillar 3304 engine. It describes removing and installing the cylinder head assembly in 31 steps, including draining coolant, removing bolts and various components, loosening belts, and installing push rods and valves. It also describes separately removing and installing the spacer plate and valve lifters. The overall document provides detailed disassembly and reassembly instructions for servicing the cylinder head.
Caterpillar cat 951 c track loader (prefix 86j) service repair manual (86j019...fjsjfkskefmem
The document provides instructions for disassembling three types of starting motors used in Caterpillar track loaders and excavators:
1. The disassembly process involves removing 19 main components like the solenoid, rear housing, brushes, pinion drive housing, and field winding coil.
2. Tools needed include retaining ring pliers and a driver. Detailed steps explain how to remove each part, with illustrations showing the component locations.
3. Technicians should mark parts for reassembly, clean components with mineral spirits, and inspect all parts for wear and damage after disassembly.
Caterpillar cat 420 e backhoe loader (prefix djl) service repair manual (djl0...fjsjfkskefmem
The document provides instructions for removing and installing the front drive shaft on a Caterpillar 420E backhoe loader. It describes:
1) Using a hydraulic jack to support the drive shaft guard and remove bolts to lower the guard.
2) Removing bolts to detach the front drive shaft.
3) Installing the drive shaft and tightening new bolts to the specified torque.
4) Raising the guard back into position and installing new bolts.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
2. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 416E BACKHOE LOADER SHA
Configuration: 416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders
Power Train
Media Number -RENR6475-13 Publication Date -01/07/2017 Date Updated -13/07/2017
i02212927
Solenoid Valve (Transmission) - Remove
SMCS - 5479-011-T3
Removal Procedure
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Dealer Service
Tool Catalog" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1/3416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
3. Illustration 1 g01117096
1. Remove bolts (3), plate (2) and floor mat (1).
Illustration 2 g01117100
Illustration 3 g01238043
2. Remove bolts (4) and place floorplate (5) to the side.
2/3416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
4. Illustration 4 g01117111
3. Remove cable straps (7) and (10). Disconnect harness assemblies (8) and (9). Remove four
plugs and bolts (6). Remove solenoid valve (11). Repeat for the remaining two solenoid
valves.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Aug 28 18:47:40 UTC+0800 2019
3/3416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
5. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 416E BACKHOE LOADER SHA
Configuration: 416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders
Power Train
Media Number -RENR6475-13 Publication Date -01/07/2017 Date Updated -13/07/2017
i02213642
Solenoid Valve (Transmission) - Install
SMCS - 5479-012-T3
Installation Procedure
Illustration 1 g01117111
1. Install solenoid valve (11). Connect harness assemblies (8) and (9). Install cable straps (7)
and (10). Install four bolts (6) and plugs . Repeat for the remaining two solenoid valves.
1/2416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
6. Illustration 2 g01238043
Illustration 3 g01117100
2. Move floorplate (5) into position and install bolts (4).
Illustration 4 g01117096
3. Install floor mat (1). Install plate (2) and bolts (3).
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Wed Aug 28 18:48:35 UTC+0800 2019
2/2416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
7. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 416E BACKHOE LOADER SHA
Configuration: 416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders
Power Train
Media Number -RENR6475-13 Publication Date -01/07/2017 Date Updated -13/07/2017
i02489286
Transmission (Power Shift) - Remove
SMCS - 3030-011-PM
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 180-3034 Repair Stand Set 4
B
8S-7615 Pin 2
4C-6486 Stand 2
8S-7641 Tube 2
8S-8048 Saddle 2
C 208-5040 Support Tube 1
D 1U-7505 Hydraulic Jack 1
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
1/9416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
8. Refer to Special Publication, NENG2500, "Caterpillar Dealer Service
Tool Catalog" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
Note: Put identification marks on all lines, on all hoses, on all wires, and on all tubes for
installation purposes. Plug all lines, hoses, and tubes. This helps to prevent fluid loss and this
helps to keep contaminants from entering the system.
1. Connect the lock for the boom. Refer to Operation and Maintenance Manual, "Boom Lock".
2. Connect the lock for the swing boom. Operation and Maintenance Manual, "Swing Lock
Pin Control".
3. Connect the lock for the extendable stick. Refer to Operation and Maintenance Manual,
"Extendable Stick Lock Control ".
4. Lower the bucket to the ground. Place the control for the bucket into the FLOAT position.
5. Drain the transmission oil into a suitable container for storage or disposal. Refer to
Operation and Maintenance Manual, "Transmission Oil - Change".
6. Remove the piston pump. Refer to Disassembly and Assembly, "Piston Pump - Remove".
7. Remove the front drive shaft. Refer to Disassembly and Assembly, "Drive Shaft (Front) -
Remove and Install".
Illustration 1 g01244146
2/9416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
9. Illustration 2 g01244145
8. Raise the machine so that the machine is level and 914 mm (36 inch) off of the floor. Install
Tooling (A) and Tooling (B) under the machine.
Illustration 3 g01244175
9. Install Tooling (A) and Tooling (C) in order to support the engine when the transmission is
removed.
Illustration 4 g01243334
10. Disconnect harness assemblies (1), (2), (3), (4), (5), (6), and (7).
3/9416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
10. Illustration 5 g01243338
11. Disconnect harness assemblies (8), (9), and (10).
Illustration 6 g01243656
12. Disconnect harness assembly (13). Remove nuts (12) and (14). Remove solenoids (11) and
(15) and remove the plungers.
Illustration 7 g01243838
13. Disconnect hose assembly (16) from the right side of the transmission.
4/9416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
11. Illustration 8 g01243661
14. Disconnect hose assemblies (17), (18), (19), and (20).
Note: Hose assemblies (19) and (20) will remain with the transmission.
Illustration 9 g01243819
15. Remove bolts (21) and place filter assembly (22) to the side. Remove bolts (24) and place
manifold assembly (23) to the side.
Illustration 10 g01243665
16. Remove bolts (26) that retain transmission filler tube (25).
5/9416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
12. Illustration 11 g01243666
17. Remove clip (27) that retains transmission filler tube (25). Place transmission filler tube
(25) to the side.
Illustration 12 g01243674
18. Disconnect hose assembly (28). Remove clamp (29) and remove hose (30) from the
hydraulic oil tank.
19. Remove the transmission oil filter. Refer to Operation and Maintenance Manual,
"Transmission Oil Filter - Replace".
6/9416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
13. Illustration 13 g01243675
20. Attach Tooling (D) to transmission assembly (31). The weight of the transmission assembly
(31) is approximately 255 kg (562 lb).
Illustration 14 g01243826
21. Remove bolts (32) and cover (33). Remove bolts (34).
Illustration 15 g01243827
22. Rotate flywheel (35) in order to remove bolts (36).
Illustration 16 g01243966
7/9416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
14. 23. Place a suitable cable strap (37) around drive plate (38) for the converter.
Illustration 17 g01243880
Illustration 18 g01243894
24. Remove nuts (41) and (45). Remove bolts (42) and (46). Remove mounting bolts (39) and
(44) and remove mounts (40) and (43) from each side of transmission assembly (31).
Illustration 19 g01244138
25. Use Tooling (D) in order to remove transmission assembly (31).
8/9416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
15. Shutdown SIS
Previous Screen
Product: BACKHOE LOADER
Model: 416E BACKHOE LOADER SHA
Configuration: 416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWERED BY 3054C Engine
Disassembly and Assembly
414E, 416E, 420E, 422E, 428E, 430E, 432E, 434E, 442E and 444E Backhoe Loaders
Power Train
Media Number -RENR6475-13 Publication Date -01/07/2017 Date Updated -13/07/2017
i02557467
Transmission (Power Shift) - Disassemble
SMCS - 3030-015-PM; 3066-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7502 Transmission Repair Stand 1
B 138-7575 Link Bracket 1
C
152-7085(1)
Transmission Shaft Handler 1
189-0409 Shackle As 1
D 1P-0074 Slide Hammer Puller Gp 1
E
8H-0663 Bearing Puller Assembly 1
6V-3010 Puller Gp 1
126-7177 Puller Leg 1
F 1U-6405 Three Jaw Puller 1
G 152-7055 Spring Compressor 1
H 2P-8312 Retaining Ring Pliers 1
(1)
CE Compliant
Start By:
1/39416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
16. a. Remove the transmission. Refer to Disassembly and Assembly, "Transmission (Power
Shift) - Remove".
Note: The transmission will be disassembled in major components. The major components will
then be disassembled.
Note: Cleanliness is an important factor. Before the disassembly procedure, the exterior of the
component should be thoroughly cleaned. This will help to prevent dirt from entering the internal
mechanism.
Illustration 1 g01244665
1. Use a suitable lifting device in order to mount transmission assembly (1) onto Tooling (A).
The weight of transmission assembly (1) is approximately 255 kg (562 lb). Remove cable
strap (3) and remove torque converter (2).
Illustration 2 g01244668
2. Remove hose assemblies (4) and coupler (5).
2/39416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
17. Illustration 3 g01244669
Illustration 4 g01244704
3. Remove bolts (6) and plate (7). Remove gear (8).
Illustration 5 g01245246
4. Remove bolts (9) and pump group (10).
3/39416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
18. Illustration 6 g01245252
5. Remove seal (11).
Illustration 7 g01245256
6. Remove lip seal (12) from pump group (10).
Illustration 8 g01244672
7. Slide shaft (13) from the transmission.
4/39416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
19. Illustration 9 g01244673
8. Remove bolts (14) and solenoid valve assemblies (15). Remove tube assembly (16).
Illustration 10 g01245229
9. Remove valve groups (17) and (18).
Illustration 11 g01245233
10. Remove O-ring seals (19) and (20) from valve group (17).
5/39416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
20. Illustration 12 g01245238
11. Remove O-ring seals (21) and (22) from valve group (18).
Illustration 13 g01244677
12. Remove bolts (23) and filter base assembly (24).
Illustration 14 g01245242
13. Remove O-rings (25) from filter base assembly (24).
6/39416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
21. Illustration 15 g01244675
14. Remove bolt (26) and front output yoke assembly (27). Remove the gasket.
Illustration 16 g01244674
15. Remove bolt (29) and rear output yoke assembly (30). Remove speed sensor (28).
Illustration 17 g01245260
16. Remove bolts (32) and cover (31).
7/39416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
22. Illustration 18 g01245264
17. Remove O-ring seal (33).
Illustration 19 g01245265
18. Remove screen (34).
Illustration 20 g01244679
8/39416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
23. Illustration 21 g01245137
19. Attach Tooling (B) and a suitable lifting device to case assembly (35). The weight of case
assembly (35) is approximately 64 kg (140 lb). Remove bolts (36). Use a suitable pry bar in
the slots of the transmission case in order to remove case assembly (35).
Illustration 22 g01244690
20. Remove bearing cups (40), (41), (42), (43) and (44). Remove lip seal (39). Remove tube
assemblies (37) and (38).
21. Remove any shims that may be present under each bearing cup. Record the measurements
of shims in order to aid in the installation procedure.
Illustration 23 g01244691
9/39416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWER...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
24. 22. Remove front output shaft assembly (45).
Illustration 24 g01280584
23. Use Tooling (C), the washer, and bolt (29) in order to remove rear output shaft (46), shaft
(47), and input shaft (48). The combined weight of rear output shaft (46), shaft (47), and
input shaft (48) is approximately 61 kg (135 lb).
Illustration 25 g01245326
24. Remove reverse shaft assembly (49).
Illustration 26 g01245327
10/39416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWE...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
25. 25. Use Tooling (D) in order to remove bearing cups (50).
Illustration 27 g01245332
26. Remove lip seal (51).
Illustration 28 g01245333
27. Remove tube assemblies (52).
Output Shaft (Front)
Illustration 29 g01245338
11/39416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWE...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. 1. Remove ring (1).
Illustration 30 g01245349
2. Use Tooling (E) in order to remove bearing cone (2).
Illustration 31 g01245356
Illustration 32 g01245357
3. Use Tooling (F) in order to remove gear (3). Remove spacer (7), bearing cone (6), washer
(5), and needle bearing (4).
12/39416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWE...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
28. Illustration 33 g01245367
4. Remove caged roller bearing (12), spacer (11), caged roller bearing (10), thrust bearing (9),
and washer (8).
Illustration 34 g01245370
5. Remove retaining ring (13) and end plate (14).
Illustration 35 g01245376
6. Remove friction discs (15) and plates (16).
13/39416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWE...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
29. Illustration 36 g01245374
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
7. Use Tooling (G) and a suitable press in order to compress spring assembly (17) and use
Tooling (H) in order to remove retaining ring (18).
Illustration 37 g01245384
8. Remove spring assembly (17).
14/39416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWE...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
30. Illustration 38 g01245389
9. Position the output shaft, as shown. Use 207 kPa (30 psi) of compressed air in order to
remove piston assembly (19).
Illustration 39 g01245392
10. Remove ring seal (20) and the O-ring seal from piston (19).
Output Shaft (Rear)
Illustration 40 g01245395
15/39416E Backhoe Loader Single Tilt Center Pivot SHA00001-UP (MACHINE) POWE...
2019/8/28https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...