The document provides instructions for removing and installing various fuel system components on a Caterpillar 320C excavator engine, including:
- Removing and installing the fuel filter base.
- Removing and installing the fuel injection lines.
- Removing the fuel injection nozzles.
- Installing the fuel injection nozzles.
- Removing and installing the fuel shutoff solenoid.
- Removing the fuel injection pump.
The procedures describe disconnecting fuel lines, removing mounting bolts and brackets, and ensuring openings are capped to prevent contamination. Required tools are listed for each job.
Caterpillar cat 320 c excavator (prefix gng) service repair manual (gng00001 ...uudfjjjskkemmd
1. The document provides instructions for removing and installing fuel injection lines and nozzles on a Caterpillar 320C excavator engine.
2. Key steps include removing bolts and clamps to disconnect lines from the fuel filter base, injection pump, and nozzles. Lines and nozzles are then removed and openings are capped to prevent contamination.
3. Reinstallation involves cleaning parts, recapping openings, and reversing the removal procedures to reconnect lines and secure nozzles with clamps and bolts.
Caterpillar cat 320 c s 320cs excavator (prefix bcn) service repair manual (b...uujjfjkkkdmme
This document provides instructions for removing and installing various fuel system components on a Caterpillar 320C excavator engine, including:
- Fuel filter base
- Fuel injection lines
- Fuel injection nozzles
- Fuel shutoff solenoid
- Fuel injection pump
The procedures describe disconnecting fuel lines, removing mounting bolts and other hardware, taking care to plug openings to prevent contamination. Proper tools are listed and installation is the reverse of removal. Safety notices warn to contain fluids and keep parts clean.
Caterpillar cat 320 c s hydraulic excavator (prefix bmz) service repair manua...fujsekfsmemm
This document provides instructions for removing and installing fuel system components on a 320C excavator with a 3066 engine. It describes removing and installing the fuel filter base, fuel injection lines, and fuel injection nozzles. The procedures involve disconnecting fuel lines, removing mounting bolts and clamps, capping openings to prevent contamination, and reinstalling components in reverse order using new seals and following tightening specifications. Special tools are required to remove the fuel injection nozzles.
This document is a parts catalog for a 60Z7 wheel loader powered by a DEUTZ TCD3.6L4 engine. It lists the serial number range for the equipment as 60D1-8001 to 60D1-8001. The catalog then provides an index of parts listed by name and corresponding page numbers.
Caterpillar cat 320 c excavator (prefix gng) service repair manual (gng00001 ...uudfjjjskkemmd
1. The document provides instructions for removing and installing fuel injection lines and nozzles on a Caterpillar 320C excavator engine.
2. Key steps include removing bolts and clamps to disconnect lines from the fuel filter base, injection pump, and nozzles. Lines and nozzles are then removed and openings are capped to prevent contamination.
3. Reinstallation involves cleaning parts, recapping openings, and reversing the removal procedures to reconnect lines and secure nozzles with clamps and bolts.
Caterpillar cat 320 c s 320cs excavator (prefix bcn) service repair manual (b...uujjfjkkkdmme
This document provides instructions for removing and installing various fuel system components on a Caterpillar 320C excavator engine, including:
- Fuel filter base
- Fuel injection lines
- Fuel injection nozzles
- Fuel shutoff solenoid
- Fuel injection pump
The procedures describe disconnecting fuel lines, removing mounting bolts and other hardware, taking care to plug openings to prevent contamination. Proper tools are listed and installation is the reverse of removal. Safety notices warn to contain fluids and keep parts clean.
Caterpillar cat 320 c s hydraulic excavator (prefix bmz) service repair manua...fujsekfsmemm
This document provides instructions for removing and installing fuel system components on a 320C excavator with a 3066 engine. It describes removing and installing the fuel filter base, fuel injection lines, and fuel injection nozzles. The procedures involve disconnecting fuel lines, removing mounting bolts and clamps, capping openings to prevent contamination, and reinstalling components in reverse order using new seals and following tightening specifications. Special tools are required to remove the fuel injection nozzles.
This document is a parts catalog for a 60Z7 wheel loader powered by a DEUTZ TCD3.6L4 engine. It lists the serial number range for the equipment as 60D1-8001 to 60D1-8001. The catalog then provides an index of parts listed by name and corresponding page numbers.
This document is the parts catalog for a Kubota 30ZV-2 wheel loader. It lists various parts for the loader's engine, electrical system, fuel system, radiator, muffler system, power train, and other components. The parts are organized into numbered sections with descriptions. The document also includes information about the loader's engine, chassis number, serial number, and parts name index.
This document is a parts catalog for a 30ZV-2 wheel loader powered by a Kubota D1803-M-D1-E3B-WLTC1 engine. It lists parts for equipment components, pumps, motors, controls, cylinders, differentials, final drives, propeller shafts, and other parts. The parts are organized by assembly, item number, part number, name, quantity, and serial number range. Notes provide information on applicable models and replacing parts.
This document is a parts catalog for equipment model 30ZV-2 that lists over 90 individual parts. It includes the serial number range for the model and outlines the chassis number and manufacturer's serial number labeling convention. The second page provides a parts name index to allow cross-referencing of part names and page numbers.
Isuzu 4 hk1 diesel engine service repair manualfujsekfksmemer
This document provides instructions for disassembling and removing components from an Isuzu 4HK1 diesel engine used in Kawasaki wheel loaders. The summary includes:
1) The document outlines procedures for removing components like the cylinder head assembly, turbocharger assembly, fuel injection system, valves and guides from the engine.
2) Key steps include draining coolant, removing exhaust and intake components, disconnecting fuel lines and electrical connections.
3) Precautions are provided to avoid damaging parts and properly organize removed components to prevent mixing up parts between cylinders.
Hyster u005 (h120 ft) forklift service repair manualfujsekfksmemer
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical specifications for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications including cylinder stroke, turning angle, radius and number of turns to lock for each model.
Hyster u005 (h110 ft) forklift service repair manualfujsekfksmemer
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical systems specs for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications like cylinder stroke, turning radius, and turns to lock for each model.
Hyster u005 (h100 ft) forklift service repair manualfujsekfksmemer
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical specifications for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications including cylinder stroke, turning angle, radius and number of turns to lock for each model.
Hyster u005 (h90 ft) forklift service repair manualfujsekfksmemer
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical systems specs for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications like cylinder stroke, turning radius, and turns to lock for each model.
Hyster u005 (h80 ft) forklift service repair manualfujsekfksmemer
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical specifications for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications including cylinder stroke, turning angle, radius and number of turns to lock for each model.
Hyster u005 (h5.5 ft europe) forklift service repair manualfujsekfksmemer
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, and fluid capacities
- Instructions for removing the drive axle which include draining fluids, disconnecting lines, and lowering the axle assembly.
Hyster u005 (h5.0 ft europe) forklift service repair manualfujsekfksmemer
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, and fluid capacities
- Instructions for removing the drive axle which include draining fluids, disconnecting lines, and lowering the axle assembly.
Hyster u005 (h4.5 fts5 europe) forklift service repair manualfujsekfksmemer
This document provides specifications and service information for Hyster lift truck models, including:
- Lift capacities and counterweight weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Procedures for removing the drive axle, which involves draining fluids, disconnecting brake and drive lines, and removing mounting bolts.
Hyster u005 (h4.0 ft6 europe) forklift service repair manualfujsekfksmemer
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, and fluid capacities
- Instructions for removing the drive axle which include draining fluids, disconnecting lines, and lowering the axle assembly.
Hyster u005 (h4.0 ft5 europe) forklift service repair manualfujsekfksmemer
This document provides specifications and service information for Hyster lift truck models, including:
- Lift capacities and counterweight weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Procedures for removing the drive axle, which involves draining fluids, disconnecting brake and drive lines, and removing mounting bolts.
Hyster s005 (h120 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster s005 (h110 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster s005 (h100 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery/ignition specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds for various mast configurations
- General service repair instructions for drive axles
Hyster s005 (h90 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle
Hyster s005 (h80 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle for repair
This document is the parts catalog for a Kubota 30ZV-2 wheel loader. It lists various parts for the loader's engine, electrical system, fuel system, radiator, muffler system, power train, and other components. The parts are organized into numbered sections with descriptions. The document also includes information about the loader's engine, chassis number, serial number, and parts name index.
This document is a parts catalog for a 30ZV-2 wheel loader powered by a Kubota D1803-M-D1-E3B-WLTC1 engine. It lists parts for equipment components, pumps, motors, controls, cylinders, differentials, final drives, propeller shafts, and other parts. The parts are organized by assembly, item number, part number, name, quantity, and serial number range. Notes provide information on applicable models and replacing parts.
This document is a parts catalog for equipment model 30ZV-2 that lists over 90 individual parts. It includes the serial number range for the model and outlines the chassis number and manufacturer's serial number labeling convention. The second page provides a parts name index to allow cross-referencing of part names and page numbers.
Isuzu 4 hk1 diesel engine service repair manualfujsekfksmemer
This document provides instructions for disassembling and removing components from an Isuzu 4HK1 diesel engine used in Kawasaki wheel loaders. The summary includes:
1) The document outlines procedures for removing components like the cylinder head assembly, turbocharger assembly, fuel injection system, valves and guides from the engine.
2) Key steps include draining coolant, removing exhaust and intake components, disconnecting fuel lines and electrical connections.
3) Precautions are provided to avoid damaging parts and properly organize removed components to prevent mixing up parts between cylinders.
Hyster u005 (h120 ft) forklift service repair manualfujsekfksmemer
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical specifications for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications including cylinder stroke, turning angle, radius and number of turns to lock for each model.
Hyster u005 (h110 ft) forklift service repair manualfujsekfksmemer
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical systems specs for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications like cylinder stroke, turning radius, and turns to lock for each model.
Hyster u005 (h100 ft) forklift service repair manualfujsekfksmemer
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical specifications for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications including cylinder stroke, turning angle, radius and number of turns to lock for each model.
Hyster u005 (h90 ft) forklift service repair manualfujsekfksmemer
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical systems specs for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications like cylinder stroke, turning radius, and turns to lock for each model.
Hyster u005 (h80 ft) forklift service repair manualfujsekfksmemer
This document provides specifications for various lift truck models including:
1) Lifting capacities and weights for the H80FT-H120FT and S80FT-S120FT models ranging from 3,629 to 5,443 kg.
2) Tire sizes, engine specifications, fuel capacities, fluid capacities, and electrical specifications for the different models.
3) Transmission oil pressures and hydraulic system relief pressures at various temperatures and engine speeds.
4) Steering system specifications including cylinder stroke, turning angle, radius and number of turns to lock for each model.
Hyster u005 (h5.5 ft europe) forklift service repair manualfujsekfksmemer
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, and fluid capacities
- Instructions for removing the drive axle which include draining fluids, disconnecting lines, and lowering the axle assembly.
Hyster u005 (h5.0 ft europe) forklift service repair manualfujsekfksmemer
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, and fluid capacities
- Instructions for removing the drive axle which include draining fluids, disconnecting lines, and lowering the axle assembly.
Hyster u005 (h4.5 fts5 europe) forklift service repair manualfujsekfksmemer
This document provides specifications and service information for Hyster lift truck models, including:
- Lift capacities and counterweight weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Procedures for removing the drive axle, which involves draining fluids, disconnecting brake and drive lines, and removing mounting bolts.
Hyster u005 (h4.0 ft6 europe) forklift service repair manualfujsekfksmemer
This document provides specifications and service information for Hyster lift truck models including:
- Lift capacities and weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, and fluid capacities
- Instructions for removing the drive axle which include draining fluids, disconnecting lines, and lowering the axle assembly.
Hyster u005 (h4.0 ft5 europe) forklift service repair manualfujsekfksmemer
This document provides specifications and service information for Hyster lift truck models, including:
- Lift capacities and counterweight weights for various models
- Tire sizes for drive and steer tires
- Fuel, oil, coolant, and hydraulic tank capacities
- Procedures for removing the drive axle, which involves draining fluids, disconnecting brake and drive lines, and removing mounting bolts.
Hyster s005 (h120 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster s005 (h110 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and other fluid capacities
- Engine and transmission specifications like oil pressures and stall speeds
- Hydraulic system relief pressures
- Steering parameters and turning radii
Hyster s005 (h100 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery/ignition specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds for various mast configurations
- General service repair instructions for drive axles
Hyster s005 (h90 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle
Hyster s005 (h80 ft) forklift service repair manualfujsekfksmemer
The document provides specifications for various components of Hyster lift truck models H80FT through H120FT, including:
- Lifting capacities and counterweight weights for each model
- Tire sizes for different truck configurations
- Fuel, oil, coolant, and hydraulic capacities and specifications
- Electrical system details like alternator outputs and battery specs
- Transmission oil pressures and relief valve settings
- Hydraulic system relief pressures
- Mast speeds and stall speeds for each engine/transmission combination
- Instructions for removing the drive axle for repair
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
The Octavia range embodies the design trend of the Škoda brand: a fusion of
aesthetics, safety and practicality. Whether you see the car as a whole or step
closer and explore its unique features, the Octavia range radiates with the
harmony of functionality and emotion
Fleet management these days is next to impossible without connected vehicle solutions. Why? Well, fleet trackers and accompanying connected vehicle management solutions tend to offer quite a few hard-to-ignore benefits to fleet managers and businesses alike. Let’s check them out!
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320C EXCAVATOR GNG
Configuration: 320C & 320C L Excavators GNG00001-UP (MACHINE) POWERED BY 3066 Engine
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01564836
Fuel Filter Base - Remove and Install
SMCS - 1262-010
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 185-3630 Strap Wrench Assembly 1
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
1/4(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
3. Dispose of all fluids according to local regulations and mandates.
Illustration 1 g00813127
1. Use Tool (A) to remove fuel filter (3) from fuel filter base (2) .
Note: It is not necessary to remove the fuel filter in order to remove the fuel filter base.
2. Remove banjo bolts (1) and copper washers in order to disconnect the fuel lines (4) from the
fuel filter base (2).
Note: Cap all openings or plug all openings immediately in order to prevent contamination
of the fuel system.
Illustration 2 g00813147
3. Remove two bolts (5) and the washers that secure the fuel filter base (2) to the air inlet
manifold. Remove the fuel filter base (2) from the fuel filter bracket.
Installation Procedure
2/4(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
4. NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 3 g00813147
1. Place the fuel filter base (2) in position on the fuel filter bracket. Install the washers and two
bolts (5) that secure the fuel filter base tothe fuel filter bracket.
Illustration 4 g00813127
2. Install the banjo bolts (1) and install new copper washers in order to connect the fuel lines
(4) to the fuel filter base (2) .
3. If the fuel filter was removed, install the fuel filter (3) to the fuel filter base (2). Tighten the
fuel filter by hand according to the instructions that are shown on the fuel filter. Do not
overtighten the fuel filter.
3/4(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
5. Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Sep 20 08:40:53 UTC+0800 2019
4/4(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
6. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320C EXCAVATOR GNG
Configuration: 320C & 320C L Excavators GNG00001-UP (MACHINE) POWERED BY 3066 Engine
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01565021
Fuel Injection Lines - Remove and Install
SMCS - 1252-010
Removal Procedure
Start By:
A. Remove the fuel filter base. Refer to Disassembly and Assembly, "Fuel Filter Base -
Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1/5(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
7. Illustration 1 g00606301
The 3066 Engine is shown.
1. Remove the bolts (1), the washers, and the clamps (2), which secure the fuel lines to the
inlet manifold (3) .
Illustration 2 g00606310
2. Disconnect the fuel injection lines (4) from the fuel injection nozzles (5) .
Note: Cap all openings or plug all openings immediately in order to prevent contamination
of the fuel system.
2/5(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
8. Illustration 3 g00606314
Fuel injection pump for a 3066 Engine
3. Disconnect the end of the fuel injection lines (4) from the fuel injection pump (6) .
Note: Cap all openings or plug all openings immediately in order to prevent contamination
of the fuel system.
4. Remove the fuel injection lines (4) from the engine.
Illustration 4 g00606317
5. Loosen the acorn nuts (7), which secure the fuel return line to the fuel injection nozzles.
6. Remove one bolt (8) and the washer from the clamp that secures the fuel return line to the
intake manifold.
Note: The clamp will remain with the fuel return line, when the fuel return line is removed
from the engine.
7. Disconnect fitting (9). Remove fuel return line (10) from the engine.
Note: Cap all openings or plug all openings immediately in order to prevent contamination
of the fuel system.
3/5(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
9. Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 5 g00606317
1. Place the fuel return line (10) in position on the engine. Connect fitting (9) of the fuel return
line to the fuel injection pump.
2. Install the washer and bolt (8) through the clamp in order to secure the fuel return line to the
inlet manifold.
3. Install the fuel return line (10) to the fuel injection nozzles. Secure the fuel return line to the
fuel injection nozzle with acorn nuts (7) .
4/5(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
10. Illustration 6 g00606399
Fuel injection pump for a 3066 Engine
4. Place the fuel injection lines (4) on the engine.
5. Connect the fuel injection lines (4) to the fuel injection pump (6) .
6. Connect the fuel injection lines (4) to the fuel injection nozzles (5) .
Note: The fuel lines (4) should be connected at the fuel injection nozzle (5) and at the fuel
injection pump (6) before tightening the nuts for the fuel injection line.
7. Tighten the nuts for the fuel injection line to a torque of 25 N·m (18 lb ft).
Illustration 7 g00606301
Fuel lines for a 3066 Engine
8. Install the clamps (2), the washers, and the bolts (1), which secure the fuel lines to the inlet
manifold (3) .
End By: Install the fuel filter base. Refer to Disassembly and Assembly, "Fuel Filter Base -
Remove and Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Sep 20 08:41:49 UTC+0800 2019
5/5(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
11. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320C EXCAVATOR GNG
Configuration: 320C & 320C L Excavators GNG00001-UP (MACHINE) POWERED BY 3066 Engine
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01151321
Fuel Injection Nozzles - Remove
SMCS - 1254-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 1U-7600 Slide Hammer Puller 1
B 9U-6278 Adapter 1
Start By:
A. Remove the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines
- Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
1/2(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
12. Illustration 1 g00652319
1. Remove bolt (1) and the washer that secures the clamp (2) to the cylinder head assembly.
2. Remove the clamp (2) that secures the fuel injection nozzle (3) in position in the cylinder
head assembly.
Note: Put caps or plugs on all openings immediately in order to prevent contamination in
the fuel system.
Note: Mark the clamp for later installation.
3. Install Tool (B) (not shown) to the fuel injection nozzle.
Note: Tool (B) is installed at the connection (4) for the fuel injection lines.
4. Connect Tool (A) (not shown) to Tool (B) in order to carefully remove fuel injection nozzle
(3) .
Note: Align the centerline of Tool (A) with the extended centerline of fuel injection nozzle
(3). This procedure will help prevent distortion of the fuel injection nozzle which can cause
the fuel injection nozzle to bend or break.
5. Remove the seat washer from the fuel injection nozzle.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Sep 20 08:42:44 UTC+0800 2019
2/2(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
13. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320C EXCAVATOR GNG
Configuration: 320C & 320C L Excavators GNG00001-UP (MACHINE) POWERED BY 3066 Engine
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01151648
Fuel Injection Nozzles - Install
SMCS - 1254-012
Installation Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Illustration 1 g00652319
1/2(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
14. 1. Install a new seat washer (5) .
2. Install fuel injection nozzle (3).
3. Install clamp (2), the washer, and bolt (1) that secures the fuel injection nozzle to the
cylinder head assembly.
4. Tighten bolt (1), that secures the fuel injection nozzle, to a torque of 22 N·m (16 lb ft).
End By: Install the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines
- Remove and Install".
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Sep 20 08:43:40 UTC+0800 2019
2/2(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
15. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320C EXCAVATOR GNG
Configuration: 320C & 320C L Excavators GNG00001-UP (MACHINE) POWERED BY 3066 Engine
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01615152
Fuel Shutoff Solenoid - Remove and Install
SMCS - 1259-010
Removal Procedure
Illustration 1 g00618938
1. Disconnect two wire leads (1). Mark the wires for later installation.
2. Disconnect actuator lever (2) from the governor lever.
3. Remove two bolts (3) and washers that secure the fuel shutoff solenoid to the bracket.
4. Remove shutoff solenoid (4) from the bracket.
Installation Procedure
1/2(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
16. Illustration 2 g00618938
1. Place the shutoff solenoid (4) in position on the bracket.
2. Install the two washers and bolts (3) that secure the fuel shutoff solenoid to the bracket.
3. Connect actuator lever (2) to the governor lever.
4. Connect two wire leads (1) to the fuel shutoff solenoid. Ensure that the wires are properly
connected.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Sep 20 08:44:36 UTC+0800 2019
2/2(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
17. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320C EXCAVATOR GNG
Configuration: 320C & 320C L Excavators GNG00001-UP (MACHINE) POWERED BY 3066 Engine
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01565175
Fuel Injection Pump - Remove
SMCS - 1251-011
Removal Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 9U-6124 Universal Metric Socket Set 1
B 9U-6128 Universal Metric Socket (1)
1
( 1 )
Part of the Universal Metric Socket Set
Start By:
A. Remove the fuel injection lines. Refer to Disassembly and Assembly, "Fuel Injection Lines
- Remove and Install".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
1/3(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
18. of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1. Ensure that the engine is the top center position on number one piston. Refer to Testing and
Adjusting, "Finding Center Position for No. 1 Piston".
Illustration 1 g00813442
2. Remove bolts (1) and washers that secure the cover (2) to the engine front housing.
3. Remove the access cover. Note the timing marks on the fuel injection pump drive gear and
the idler gear for later installation.
Illustration 2 g00813430
2/3(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
19. 4. Scribe a line across the front plate (3) and the mounting flange for the fuel injection pump
(4). This ensures proper alignment for the installation of fuel injection pump (8) .
5. Loosen fitting (5) for oil line (6) .
6. Remove oil line (6) from nipple (7) (not shown).
Note: Put caps or plugs on all openings immediately in order to prevent contamination.
7. Use a lifting sling and a hoist in order to secure the fuel injection pump. The weight of the
fuel injection pump is 13 kg (29 lb).
Note: Use Tool (B) to remove the bolts and the washers that mount the fuel injection pump
(8) .
8. Remove bolt (9) and the washer from the cylinder block.
9. Remove four bolts (10) and the washers that secure the fuel injection pump to the front
housing.
Illustration 3 g00813593
10. Remove the fuel injection pump (8). The gear and the mounting flange will remain with the
fuel injection pump.
Note: The fuel injection pump must be mounted to the engine in order to loosen the nut for
the drive gear.
Note: Do not rotate the engine after the fuel injection pump is removed.
11. Ensure that the old gasket material is removed from all mating surfaces of the pump
mounting flange and the face of the fuel injection pump flange.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Sep 20 08:45:32 UTC+0800 2019
3/3(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
20. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320C EXCAVATOR GNG
Configuration: 320C & 320C L Excavators GNG00001-UP (MACHINE) POWERED BY 3066 Engine
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01565619
Fuel Injection Pump - Install
SMCS - 1251-012
Installation Procedure
Table 1
Required Tools
Tool Part number Part Description Qty
A 9U-6124 Universal Metric Socket Set 1
B 9U-6128 Universal Metric Socket (1)
1
( 1 )
Part of the Universal Metric Socket Set
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: If the nut for the fuel injection pump drive gear is removed, you must tighten the nut
for the fuel injection pump drive gear to 88 ± 5 N·m (65 ± 4 lb ft).
1/2(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
21. Illustration 1 g00813430
1. Use a lifting sling and a hoist in order to secure the fuel injection pump (8). The weight of
the fuel injection pump is 13 kg (29 lb).
2. Install a new gasket and install fuel injection pump (8) .
3. Ensure that the engine is in the top center position on No. 1 piston. Refer to Testing and
Adjusting, "Finding Top Center Position for No. 1 Piston".
4. Ensure that the mark on the front plate (3) and the mark on the fuel injection pump flange
(4) are aligned.
Refer to Testing and Adjusting, "Fuel Injection Timing-Check" for more information on
fuel injection pump timing.
Note: Use Tool (B) to install the bolts and washers that secure the fuel injection pump to the
cylinder block.
5. Install the washers and bolts (9) that secure the fuel injection pump to the engine cylinder
block.
6. Remove the sling from the fuel injection pump.
7. Connect oil line (6) to nipple (7) (not shown).
8. Tighten fitting (5) for oil line (6) .
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Sep 20 08:46:28 UTC+0800 2019
2/2(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
22. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320C EXCAVATOR GNG
Configuration: 320C & 320C L Excavators GNG00001-UP (MACHINE) POWERED BY 3066 Engine
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01564499
Turbocharger - Remove
SMCS - 1052-011
Removal Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1/3(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
23. Illustration 1 g00608136
1. Loosen the hose clamp (1) on hose (2) .
2. Remove hose (2) from the turbocharger (3) .
Illustration 2 g00812846
3. Disconnect oil supply line (4) from the cylinder block.
4. Loosen two clamps (5) on hose (7) .
5. Slide hose (7) off fitting (8) onto oil return line (6) .
2/3(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
24. Illustration 3 g00608177
6. Remove eight nuts (9) from the studs on the exhaust manifold.
Note: The four studs have two nuts for a total of eight nuts.
7. Remove turbocharger (3), oil supply line (4), and oil return line (6) as an unit.
8. Remove metal gasket (10) (not shown). Check the gasket for wear or damage. Replace the
gasket, if necessary.
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Sep 20 08:47:24 UTC+0800 2019
3/3(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
25. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320C EXCAVATOR GNG
Configuration: 320C & 320C L Excavators GNG00001-UP (MACHINE) POWERED BY 3066 Engine
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01615171
Turbocharger - Disassemble
SMCS - 1052-015
Disassembly Procedure
Start By:
A. Remove the turbocharger. Refer to Disassembly and Assembly, "Turbocharger - Remove".
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
NOTICE
Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Caterpillar Tools and Shop
Products Guide" for tools and supplies suitable to collect and contain
fluids on Caterpillar products.
Dispose of all fluids according to local regulations and mandates.
1/4(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. 1. Place an index mark on all of the components. The marks will help to align the components
during the assembly procedure.
Illustration 1 g00608212
2. Remove two bolts (1) from the oil return line. Remove bolt (2) from the oil supply line.
3. Remove oil return line (3) from the cartridge.
4. Remove oil supply line (4) from the cartridge.
Illustration 2 g00608210
5. Remove gasket (5) from the cartridge.
6. Remove gasket (6) from the turbine housing.
2/4(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
28. Illustration 3 g00608342
7. Remove the bolt and nut (7) from clamp (8). Remove clamp (8) that secures the turbine
housing (9) to the cartridge (10) .
8. Separate turbine housing (9) from the cartridge (10) .
Illustration 4 g00608415
Illustration 5 g00608452
3/4(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
29. 9. Remove snap ring (11) from compressor housing (12) .
10. Separate compressor housing (12) from the cartridge (10) .
Copyright 1993 - 2019 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Fri Sep 20 08:48:19 UTC+0800 2019
4/4(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...
30. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 320C EXCAVATOR GNG
Configuration: 320C & 320C L Excavators GNG00001-UP (MACHINE) POWERED BY 3066 Engine
Disassembly and Assembly
3064 and 3066 Engines for Caterpillar Built Machines
Media Number -SENR5553-10 Publication Date -01/05/2012 Date Updated -15/05/2012
i01147762
Turbocharger - Assemble
SMCS - 1052-016
Assembly Procedure
NOTICE
Keep all parts clean from contaminants.
Contaminants may cause rapid wear and shortened component life.
Note: During the assembly procedure, ensure that the index marks are aligned when the
components are assembled.
Illustration 1 g00608452
1/3(W)
w
2019/9/20
https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sisweb/sisw...