This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of 314D CR and 314D LCR excavators. It lists required tools and outlines 16 steps to disassemble the components, including draining fluids, removing fittings and plates, using pullers to remove bearings, and disassembling internal parts like pistons, springs, and seals. Personal injury warnings are provided regarding hydraulic pressure, released spring forces, and striking by parts.
Caterpillar cat 314 d lcr excavator (prefix byj) service repair manual (byj00...soeldksejdksem
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 314D CR and 314D LCR excavator. It lists 17 required tools and gives detailed step-by-step instructions to disassemble each component. Some key steps include draining fluids, removing covers and plates, using pullers to remove bearings, and noting part locations for reassembly. Safety notices are provided regarding releasing pressures and springs.
Caterpillar cat 314 d lcr excavator (prefix ssz) service repair manual (ssz00...fjskekdmjekm
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 314D LCR excavator. It lists required tools and outlines 16 steps for disassembling the components, including draining fluids, removing fittings and valves, using pullers to remove bearings, and noting part orientations for reassembly. Safety notices are included to warn of potential injuries from pressurized fluids, heavy parts, and released spring forces.
Caterpillar cat 314 c lcr excavator (prefix kja) service repair manual (kja00...jfdskekdmme
This document provides disassembly instructions for the final drive, travel motor, and other components of a 314C excavator. It lists required tools and outlines over 30 steps to disassemble parts like the final drive, travel motor, counterbalance valve, and planetary gear assemblies. Safety notices are included throughout to warn of hazards like released spring forces and hot or pressurized fluids.
Caterpillar cat 313 d excavator (prefix kxd) service repair manual (kxd00001 ...fjskekdmjekm
This document provides instructions for disassembling various components of a 313D excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists the required tools and outlines 16 steps to disassemble parts like the sprockets, valves, pistons, plates, springs, and seals. Safety notices are included to warn of potential injuries from fluids, pressures, and released spring forces when handling or disassembling parts.
Caterpillar cat 314 c lcr excavator (prefix pca) service repair manual (pca00...jfdskekdmme
This document provides disassembly instructions for excavator models 314C, 314C CR, and 314C LCR. It describes how to disassemble components of the final drive, travel motor, counterbalance valve, and other systems. The instructions are detailed, listing each part and step in the disassembly process. Required tools are provided at the beginning. Safety notices are included throughout to warn of hazards like stored energy in springs.
This document provides disassembly instructions for the final drive, travel motor, and other components of excavator models 312D2 and 312D2 L. It outlines 16 steps to disassemble the final drive which include draining fluids, removing fittings and valves, and using various tools. It then details 14 steps to disassemble the travel motor which involve removing seals, pistons, plates and other parts. Safety notices are included throughout to warn of potential injuries from springs, fluids and heavy components.
Caterpillar Cat 314D CR and 314D LCR Excavator (Prefix BYJ) Service Repair Ma...fijsekkdmdm2w
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 314D CR and 314D LCR excavator. It lists the required tools and safety precautions and outlines 16 steps to disassemble the components, including draining fluids, removing covers, plates, seals, springs, and pistons. Personal injury warnings are provided throughout for releasing spring forces.
Caterpillar Cat 314D CR and 314D LCR Excavator (Prefix BYJ) Service Repair Ma...zan2736ban
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of an excavator model. It lists over 30 detailed steps to disassemble parts like the final drive, travel motor, counterbalance valve, and hydraulic components. Safety notices are provided throughout to warn of hazards like released spring forces or hot/pressurized fluids. Dismantling requires specialty tools and careful tracking of part locations for reassembly.
Caterpillar cat 314 d lcr excavator (prefix byj) service repair manual (byj00...soeldksejdksem
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 314D CR and 314D LCR excavator. It lists 17 required tools and gives detailed step-by-step instructions to disassemble each component. Some key steps include draining fluids, removing covers and plates, using pullers to remove bearings, and noting part locations for reassembly. Safety notices are provided regarding releasing pressures and springs.
Caterpillar cat 314 d lcr excavator (prefix ssz) service repair manual (ssz00...fjskekdmjekm
The document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 314D LCR excavator. It lists required tools and outlines 16 steps for disassembling the components, including draining fluids, removing fittings and valves, using pullers to remove bearings, and noting part orientations for reassembly. Safety notices are included to warn of potential injuries from pressurized fluids, heavy parts, and released spring forces.
Caterpillar cat 314 c lcr excavator (prefix kja) service repair manual (kja00...jfdskekdmme
This document provides disassembly instructions for the final drive, travel motor, and other components of a 314C excavator. It lists required tools and outlines over 30 steps to disassemble parts like the final drive, travel motor, counterbalance valve, and planetary gear assemblies. Safety notices are included throughout to warn of hazards like released spring forces and hot or pressurized fluids.
Caterpillar cat 313 d excavator (prefix kxd) service repair manual (kxd00001 ...fjskekdmjekm
This document provides instructions for disassembling various components of a 313D excavator, including the final drive, travel motor, counterbalance valve, and travel motor. It lists the required tools and outlines 16 steps to disassemble parts like the sprockets, valves, pistons, plates, springs, and seals. Safety notices are included to warn of potential injuries from fluids, pressures, and released spring forces when handling or disassembling parts.
Caterpillar cat 314 c lcr excavator (prefix pca) service repair manual (pca00...jfdskekdmme
This document provides disassembly instructions for excavator models 314C, 314C CR, and 314C LCR. It describes how to disassemble components of the final drive, travel motor, counterbalance valve, and other systems. The instructions are detailed, listing each part and step in the disassembly process. Required tools are provided at the beginning. Safety notices are included throughout to warn of hazards like stored energy in springs.
This document provides disassembly instructions for the final drive, travel motor, and other components of excavator models 312D2 and 312D2 L. It outlines 16 steps to disassemble the final drive which include draining fluids, removing fittings and valves, and using various tools. It then details 14 steps to disassemble the travel motor which involve removing seals, pistons, plates and other parts. Safety notices are included throughout to warn of potential injuries from springs, fluids and heavy components.
Caterpillar Cat 314D CR and 314D LCR Excavator (Prefix BYJ) Service Repair Ma...fijsekkdmdm2w
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of a 314D CR and 314D LCR excavator. It lists the required tools and safety precautions and outlines 16 steps to disassemble the components, including draining fluids, removing covers, plates, seals, springs, and pistons. Personal injury warnings are provided throughout for releasing spring forces.
Caterpillar Cat 314D CR and 314D LCR Excavator (Prefix BYJ) Service Repair Ma...zan2736ban
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of an excavator model. It lists over 30 detailed steps to disassemble parts like the final drive, travel motor, counterbalance valve, and hydraulic components. Safety notices are provided throughout to warn of hazards like released spring forces or hot/pressurized fluids. Dismantling requires specialty tools and careful tracking of part locations for reassembly.
Caterpillar cat 314 d cr excavator (prefix byj) service repair manual (byj000...fhsjejkdmem
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of an excavator model. It lists over 30 detailed steps to disassemble parts like the final drive, travel motor, counterbalance valve, and hydraulic components. Safety warnings are provided throughout to warn of hazards like released spring forces or remaining hydraulic pressure. Required tools include pullers, wrenches, and lifting devices to handle the various heavy parts being disassembled.
Caterpillar cat 314 d lcr excavator (prefix byj) service repair manual (byj00...fhsjekkdkem
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of an excavator model. It lists over 30 detailed steps to disassemble parts like the final drive, travel motor, counterbalance valve, and hydraulic components. Safety warnings are provided throughout to warn of hazards like released spring forces or remaining hydraulic pressure. Required tools include pullers, wrenches, and lifting devices to handle the various heavy parts being disassembled.
Caterpillar cat 314 d lcr excavator (prefix byj) service repair manual (byj00...idkkdmmdd
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of an excavator model. It lists over 30 detailed steps to disassemble parts like the final drive, travel motor, counterbalance valve, and hydraulic components. Safety notices are provided throughout to warn of hazards like released spring forces or hot/pressurized fluids. Dismantling requires specialty tools and careful tracking of part locations for reassembly.
Caterpillar Cat 314D CR and 314D LCR Excavator (Prefix BYJ) Service Repair Ma...fujkskemdmdm4r
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of an excavator model. It lists over 30 detailed steps to disassemble parts like the final drive, travel motor, counterbalance valve, and hydraulic components. Safety notices are provided throughout to warn of hazards like released spring forces or hot/pressurized fluids. Dismantling requires specialty tools and careful tracking of part locations for reassembly.
Caterpillar cat 314 d cr excavator (prefix byj) service repair manual (byj000...idkkddmmd1
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of an excavator model. It lists over 30 detailed steps to disassemble parts like the final drive, travel motor, counterbalance valve, and hydraulic components. Safety notices are provided throughout to warn of hazards like released spring forces or hot/pressurized fluids. Dismantling requires specialty tools and careful tracking of part locations for reassembly.
Caterpillar cat 314 d lcr excavator (prefix byj) service repair manual (byj00...fhsejkdkmem
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of an excavator model. It lists over 30 detailed steps to disassemble parts like the final drive, travel motor, counterbalance valve, and hydraulic components. Safety warnings are provided throughout to warn of hazards like released spring forces or remaining hydraulic pressure. Required tools include pullers, wrenches, and lifting devices to handle the various heavy components weighing up to 200kg being disassembled.
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of an excavator model. It lists over 30 detailed steps to disassemble parts like the final drive, travel motor, counterbalance valve, and hydraulic components. Safety notices are provided throughout to warn of hazards like released spring forces or hot/pressurized fluids. Dismantling requires specialty tools and careful tracking of part locations for reassembly.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of excavator models 314D CR and 314D LCR. It lists 19 steps to disassemble the components, including draining fluids, removing fittings, bolts, plates, seals, springs, pistons, and other parts. Safety precautions are provided to release pressures and contain fluids. Required tools include link brackets, a transmission repair stand, bolts, pullers, wrenches, and other equipment.
Caterpillar cat 314 d cr excavator (prefix byj) service repair manual (byj000...fjjsekdmme
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of an excavator model. It lists over 30 detailed steps to disassemble parts like the final drive, travel motor, counterbalance valve, and hydraulic components. Safety warnings are provided throughout to warn of hazards like released spring forces or remaining hydraulic pressure. Required tools include pullers, wrenches, and lifting devices to handle the various heavy components weighing up to 200kg being disassembled.
Caterpillar Cat 314D CR and 314D LCR Excavator (Prefix BYJ) Service Repair Ma...fskekkdmdmdm3e
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of excavator models 314D CR and 314D LCR. It lists the required tools and safety precautions and outlines 19 steps to disassemble the components. Key steps include draining fluids, removing fittings and plates, using pullers to remove bearings, and disassembling springs, pistons, and other internal parts while noting their positions for reassembly. Personal protective equipment is recommended when handling parts under spring pressure.
Caterpillar cat 314 d lcr excavator (prefix ssz) service repair manual (ssz00...ifosodkmsme
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of a 314D LCR excavator. It lists over 30 detailed steps to disassemble the various parts, including removing covers, plates, gears, pistons, seals, and other components. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluid. Required tools are listed for the disassembly process.
1) The document provides disassembly instructions for a 314D LCR excavator final drive and travel motor. It describes removing various components such as sprockets, valves, gears, plates, and motors.
2) Detailed steps are given to disassemble the final drive, travel motor, counterbalance valve, and traction control valve. Components are to be marked for reassembly and cleaned.
3) Required tools include link brackets, a transmission repair stand, bolts, pullers, pliers, and wrenches. Safety precautions are provided to relieve pressures and contain fluids.
The document is a service repair manual that provides disassembly instructions for a 314D LCR excavator final drive, travel motor, and counterbalance valve. It lists required tools and outlines 16 steps to disassemble the final drive components, 10 steps to disassemble the counterbalance valve, and 9 steps to disassemble the travel motor. Personal injury warnings are provided throughout regarding hydraulic pressure, heavy components, and released spring forces.
Caterpillar cat 314 d lcr excavator (prefix ssz) service repair manual (ssz00...ikdkkdmdmdm
The document is a service repair manual that provides disassembly instructions for a 314D LCR excavator final drive, travel motor, and counterbalance valve. It lists required tools and safety notices, then outlines 16 steps to disassemble the final drive components, 10 steps to disassemble the counterbalance valve, and 9 steps to disassemble the travel motor. Personal injury warnings are provided throughout for springs that could be propelled by released spring forces.
Caterpillar cat 314 d lcr excavator (prefix ssz) service repair manual (ssz00...fjjskejdmdn
The document provides disassembly instructions for a 314D LCR excavator final drive and travel motor. It lists required tools and outlines 23 steps to disassemble components like the final drive, travel motor, counterbalance valve, and traction control valve. Personal injury warnings are included to remind technicians to release pressures and springs safely. Detailed illustrations accompany each step to ensure correct reassembly.
Mc cormick xtx series (2005 2007) - xtx200 tractor service repair manualfjjskekdmmse
This document provides part numbers and descriptions for replacement parts for various components of XTX Series tractors XTX185, XTX200, and XTX215 from 2005 to 2007, including the engine, radiator, hydraulic system, transmission, and cooling system. The parts include gaskets, hoses, fittings, brackets, seals, bolts, and other hardware. Notes are provided for some parts regarding changes in part numbers or specifications over time.
Mc cormick xtx series (2005 2007) - xtx185 tractor service repair manualfjjskekdmmse
This document provides part numbers and descriptions for replacement components for various systems on XTX Series tractors XTX185, XTX200, and XTX215 from 2005-2007, including the engine, cooling system, hydraulic system, and other systems. The parts listed include gaskets, hoses, fittings, pumps, filters, belts, brackets, seals, and other common replacement components.
Mc cormick x70 series tier 4 (2012 2013) - rpe1 - x70.50 tractor service repa...fjjskekdmmse
This document provides a list of components for an engine assembly. It includes items like pistons, rods, bearings, crankshaft, gears, bushings, pins, rings, dowel pins, screws, plugs, gaskets, manifolds, valves, springs and other small parts. Each item lists the part number, quantity, and any relevant specifications. The document also indicates which components are replacements or for specific markets.
Mc cormick x50m series tier 4 (2013 ) - rs26 - x50.40m tractor service repai...fjjskekdmmse
This document contains parts listings and diagrams for components of an engine. It lists 3 engines labeled A, B and C that are 75kw Perkins engines. It then shows diagrams and part numbers for various engine block, cylinder head, piston, connecting rod and other internal components. It also lists sensors, pumps, hoses and other external components along with their part numbers. The document provides detailed exploded views and part listings for replacement parts of an engine.
Mc cormick x10 series (2011 ) - rpk1 - x10.30m-eu tractor service repair manualfjjskekdmmse
This document contains a parts list for an agricultural tractor. It includes 44 line items with information on the part number, description, and quantity of each part. The parts are for various mechanical systems of the tractor like the clutch, transmission, hydraulics, engine, and other components. This appears to be a comprehensive list of replacement parts needed to service the tractor.
Mc cormick x10 series (2011 ) - rpk1 - x10.25h-eu tractor service repair manualfjjskekdmmse
This document does not contain any text to summarize. It only contains the letter "d" and "a". There is no meaningful information or context provided to create an informative summary.
Mc cormick x7.4 tier 4i (2013 ) - rpd2 - x7.440 tractor service repair manualfjjskekdmmse
This document provides information on engine components for a McCormick X7.4 Tier 4i engine from 2013. It includes images and part numbers for over 50 individual engine parts, including the engine block, pistons, crankshaft, valves, pumps, manifolds, and other internal engine components. Each part lists the part number, quantity used, and notes whether it is a replacement part. The document also provides the engine model and OEM information.
More Related Content
Similar to Caterpillar cat 314 d cr excavator (prefix byj) service repair manual (byj00001 and up)
Caterpillar cat 314 d cr excavator (prefix byj) service repair manual (byj000...fhsjejkdmem
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of an excavator model. It lists over 30 detailed steps to disassemble parts like the final drive, travel motor, counterbalance valve, and hydraulic components. Safety warnings are provided throughout to warn of hazards like released spring forces or remaining hydraulic pressure. Required tools include pullers, wrenches, and lifting devices to handle the various heavy parts being disassembled.
Caterpillar cat 314 d lcr excavator (prefix byj) service repair manual (byj00...fhsjekkdkem
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of an excavator model. It lists over 30 detailed steps to disassemble parts like the final drive, travel motor, counterbalance valve, and hydraulic components. Safety warnings are provided throughout to warn of hazards like released spring forces or remaining hydraulic pressure. Required tools include pullers, wrenches, and lifting devices to handle the various heavy parts being disassembled.
Caterpillar cat 314 d lcr excavator (prefix byj) service repair manual (byj00...idkkdmmdd
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of an excavator model. It lists over 30 detailed steps to disassemble parts like the final drive, travel motor, counterbalance valve, and hydraulic components. Safety notices are provided throughout to warn of hazards like released spring forces or hot/pressurized fluids. Dismantling requires specialty tools and careful tracking of part locations for reassembly.
Caterpillar Cat 314D CR and 314D LCR Excavator (Prefix BYJ) Service Repair Ma...fujkskemdmdm4r
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of an excavator model. It lists over 30 detailed steps to disassemble parts like the final drive, travel motor, counterbalance valve, and hydraulic components. Safety notices are provided throughout to warn of hazards like released spring forces or hot/pressurized fluids. Dismantling requires specialty tools and careful tracking of part locations for reassembly.
Caterpillar cat 314 d cr excavator (prefix byj) service repair manual (byj000...idkkddmmd1
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of an excavator model. It lists over 30 detailed steps to disassemble parts like the final drive, travel motor, counterbalance valve, and hydraulic components. Safety notices are provided throughout to warn of hazards like released spring forces or hot/pressurized fluids. Dismantling requires specialty tools and careful tracking of part locations for reassembly.
Caterpillar cat 314 d lcr excavator (prefix byj) service repair manual (byj00...fhsejkdkmem
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of an excavator model. It lists over 30 detailed steps to disassemble parts like the final drive, travel motor, counterbalance valve, and hydraulic components. Safety warnings are provided throughout to warn of hazards like released spring forces or remaining hydraulic pressure. Required tools include pullers, wrenches, and lifting devices to handle the various heavy components weighing up to 200kg being disassembled.
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of an excavator model. It lists over 30 detailed steps to disassemble parts like the final drive, travel motor, counterbalance valve, and hydraulic components. Safety notices are provided throughout to warn of hazards like released spring forces or hot/pressurized fluids. Dismantling requires specialty tools and careful tracking of part locations for reassembly.
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of excavator models 314D CR and 314D LCR. It lists 19 steps to disassemble the components, including draining fluids, removing fittings, bolts, plates, seals, springs, pistons, and other parts. Safety precautions are provided to release pressures and contain fluids. Required tools include link brackets, a transmission repair stand, bolts, pullers, wrenches, and other equipment.
Caterpillar cat 314 d cr excavator (prefix byj) service repair manual (byj000...fjjsekdmme
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of an excavator model. It lists over 30 detailed steps to disassemble parts like the final drive, travel motor, counterbalance valve, and hydraulic components. Safety warnings are provided throughout to warn of hazards like released spring forces or remaining hydraulic pressure. Required tools include pullers, wrenches, and lifting devices to handle the various heavy components weighing up to 200kg being disassembled.
Caterpillar Cat 314D CR and 314D LCR Excavator (Prefix BYJ) Service Repair Ma...fskekkdmdmdm3e
This document provides disassembly instructions for the final drive, travel motor, and counterbalance valve of excavator models 314D CR and 314D LCR. It lists the required tools and safety precautions and outlines 19 steps to disassemble the components. Key steps include draining fluids, removing fittings and plates, using pullers to remove bearings, and disassembling springs, pistons, and other internal parts while noting their positions for reassembly. Personal protective equipment is recommended when handling parts under spring pressure.
Caterpillar cat 314 d lcr excavator (prefix ssz) service repair manual (ssz00...ifosodkmsme
The document provides disassembly instructions for the final drive, travel motor, and hydraulic components of a 314D LCR excavator. It lists over 30 detailed steps to disassemble the various parts, including removing covers, plates, gears, pistons, seals, and other components. Safety notices are included to warn of potential injuries from parts propelled by springs or pressurized hydraulic fluid. Required tools are listed for the disassembly process.
1) The document provides disassembly instructions for a 314D LCR excavator final drive and travel motor. It describes removing various components such as sprockets, valves, gears, plates, and motors.
2) Detailed steps are given to disassemble the final drive, travel motor, counterbalance valve, and traction control valve. Components are to be marked for reassembly and cleaned.
3) Required tools include link brackets, a transmission repair stand, bolts, pullers, pliers, and wrenches. Safety precautions are provided to relieve pressures and contain fluids.
The document is a service repair manual that provides disassembly instructions for a 314D LCR excavator final drive, travel motor, and counterbalance valve. It lists required tools and outlines 16 steps to disassemble the final drive components, 10 steps to disassemble the counterbalance valve, and 9 steps to disassemble the travel motor. Personal injury warnings are provided throughout regarding hydraulic pressure, heavy components, and released spring forces.
Caterpillar cat 314 d lcr excavator (prefix ssz) service repair manual (ssz00...ikdkkdmdmdm
The document is a service repair manual that provides disassembly instructions for a 314D LCR excavator final drive, travel motor, and counterbalance valve. It lists required tools and safety notices, then outlines 16 steps to disassemble the final drive components, 10 steps to disassemble the counterbalance valve, and 9 steps to disassemble the travel motor. Personal injury warnings are provided throughout for springs that could be propelled by released spring forces.
Caterpillar cat 314 d lcr excavator (prefix ssz) service repair manual (ssz00...fjjskejdmdn
The document provides disassembly instructions for a 314D LCR excavator final drive and travel motor. It lists required tools and outlines 23 steps to disassemble components like the final drive, travel motor, counterbalance valve, and traction control valve. Personal injury warnings are included to remind technicians to release pressures and springs safely. Detailed illustrations accompany each step to ensure correct reassembly.
Similar to Caterpillar cat 314 d cr excavator (prefix byj) service repair manual (byj00001 and up) (15)
Mc cormick xtx series (2005 2007) - xtx200 tractor service repair manualfjjskekdmmse
This document provides part numbers and descriptions for replacement parts for various components of XTX Series tractors XTX185, XTX200, and XTX215 from 2005 to 2007, including the engine, radiator, hydraulic system, transmission, and cooling system. The parts include gaskets, hoses, fittings, brackets, seals, bolts, and other hardware. Notes are provided for some parts regarding changes in part numbers or specifications over time.
Mc cormick xtx series (2005 2007) - xtx185 tractor service repair manualfjjskekdmmse
This document provides part numbers and descriptions for replacement components for various systems on XTX Series tractors XTX185, XTX200, and XTX215 from 2005-2007, including the engine, cooling system, hydraulic system, and other systems. The parts listed include gaskets, hoses, fittings, pumps, filters, belts, brackets, seals, and other common replacement components.
Mc cormick x70 series tier 4 (2012 2013) - rpe1 - x70.50 tractor service repa...fjjskekdmmse
This document provides a list of components for an engine assembly. It includes items like pistons, rods, bearings, crankshaft, gears, bushings, pins, rings, dowel pins, screws, plugs, gaskets, manifolds, valves, springs and other small parts. Each item lists the part number, quantity, and any relevant specifications. The document also indicates which components are replacements or for specific markets.
Mc cormick x50m series tier 4 (2013 ) - rs26 - x50.40m tractor service repai...fjjskekdmmse
This document contains parts listings and diagrams for components of an engine. It lists 3 engines labeled A, B and C that are 75kw Perkins engines. It then shows diagrams and part numbers for various engine block, cylinder head, piston, connecting rod and other internal components. It also lists sensors, pumps, hoses and other external components along with their part numbers. The document provides detailed exploded views and part listings for replacement parts of an engine.
Mc cormick x10 series (2011 ) - rpk1 - x10.30m-eu tractor service repair manualfjjskekdmmse
This document contains a parts list for an agricultural tractor. It includes 44 line items with information on the part number, description, and quantity of each part. The parts are for various mechanical systems of the tractor like the clutch, transmission, hydraulics, engine, and other components. This appears to be a comprehensive list of replacement parts needed to service the tractor.
Mc cormick x10 series (2011 ) - rpk1 - x10.25h-eu tractor service repair manualfjjskekdmmse
This document does not contain any text to summarize. It only contains the letter "d" and "a". There is no meaningful information or context provided to create an informative summary.
Mc cormick x7.4 tier 4i (2013 ) - rpd2 - x7.440 tractor service repair manualfjjskekdmmse
This document provides information on engine components for a McCormick X7.4 Tier 4i engine from 2013. It includes images and part numbers for over 50 individual engine parts, including the engine block, pistons, crankshaft, valves, pumps, manifolds, and other internal engine components. Each part lists the part number, quantity used, and notes whether it is a replacement part. The document also provides the engine model and OEM information.
Kubota 03 m-e3 bg series diesel engine service repair manualfjjskekdmmse
The document is a workshop manual that provides information on servicing the 03-M-E3B, 03-M-DI-E3B, and 03-M-E3BG series diesel engines. It covers general information, the engine mechanism, and servicing procedures. The general section includes identification, precautions, and special tools. The mechanism section describes construction and function. The servicing section covers troubleshooting, specifications, torque values, adjustments, disassembly/assembly, and other procedures. Safety instructions are also provided.
Kubota 03 m-e3 b series diesel engine service repair manualfjjskekdmmse
The document is a workshop manual that provides information on servicing the 03-M-E3B, 03-M-DI-E3B, and 03-M-E3BG series diesel engines. It covers general information, the engine mechanism, and servicing procedures. The general section includes identification, precautions, and special tools. The mechanism section describes construction and function. The servicing section covers troubleshooting, specifications, torque values, adjustments, disassembly/assembly, and other procedures. Safety instructions are also provided.
Komatsu wh716 1 e0 telescopic handler service repair manual sn 395f71003 and upfjjskekdmmse
This document provides instructions for removing and installing parts for a telescopic handler model. It includes the following sections:
1. Structure and function which explains the components and how they work.
2. Testing and adjusting which describes checks before and after repairs and adjustments to be made.
3. Disassembly and assembly which explains the order and precautions for removing, installing, disassembling and assembling components.
The document provides detailed step-by-step instructions for removing and installing components like the engine hood, radiator hood, air filter, turbocharger, exhaust pipe, and fan belt. Safety precautions and notes are included throughout.
Komatsu wh716 1 telescopic handler service repair manual sn 395 f70004 and upfjjskekdmmse
This document provides removal and installation instructions for various components of a telescopic handler model, including the engine hood, air filter, turbocharger, exhaust pipe, generator and fan belt, radiator-exchanger assembly, muffler, battery and tray, cylinder head, and injectors. Removal and installation steps are provided for each component, typically involving disconnecting connecting parts and fasteners before removing the part in question and reconnecting everything in reverse order for installation.
Komatsu wh714 h 1e0 telescopic handler service repair manual sn 395f71003 and upfjjskekdmmse
This document provides instructions for removing and installing parts for a telescopic handler model. It includes the following sections:
1. Structure and function which explains the components and how they work.
2. Testing and adjusting which describes checks before and after repairs and adjustments to be made.
3. Disassembly and assembly which explains the order and precautions for removing, installing, disassembling and assembling components.
The document provides detailed step-by-step instructions for removing and installing components like the engine hood, radiator hood, air filter, turbocharger, exhaust pipe, and fan belt. Safety precautions and notes are included throughout.
Komatsu wh714 h 1 telescopic handler service repair manual sn395f70003 and upfjjskekdmmse
This document provides removal and installation instructions for various components of a telescopic handler model, including the engine hood, air filter, turbocharger, exhaust pipe, generator and fan belt, radiator-exchanger assembly, muffler, battery and tray, cylinder head, and injectors. Removal and installation steps are provided for each component, typically involving disconnecting connecting parts and fasteners before removing the part in question and reconnecting everything in reverse order for installation.
Komatsu wh714 1 telescopic handler service repair manual sn 395 f70002 and upfjjskekdmmse
This document provides removal and installation instructions for various components of a telescopic handler model, including the engine hood, air filter, turbocharger, exhaust pipe, generator and fan belt, radiator-exchanger assembly, muffler, battery and tray, cylinder head, and injectors. Removal and installation steps are provided for each component, typically involving disconnecting connecting parts and fasteners before removing the part in question and reconnecting everything in reverse order for installation.
Komatsu wh713 1 e0 telescopic handler service repair manual sn 395f71003 and upfjjskekdmmse
This document provides instructions for removing and installing parts for a telescopic handler model. It includes the following sections:
1. Structure and function which explains the components and how they work.
2. Testing and adjusting which describes checks before and after repairs and adjustments to be made.
3. Disassembly and assembly which explains the order and precautions for removing, installing, disassembling and assembling components.
The document provides detailed step-by-step instructions for removing and installing components like the engine hood, radiator hood, air filter, turbocharger, exhaust pipe, and fan belt. Safety precautions and notes are included throughout.
Komatsu wh713 1 telescopic handler service repair manual sn 395 f70001 and upfjjskekdmmse
This document provides removal and installation instructions for various components of a telescopic handler model, including the engine hood, air filter, turbocharger, exhaust pipe, generator and fan belt, radiator-exchanger assembly, muffler, battery and tray, cylinder head, and injectors. Removal and installation steps are provided for each component, typically involving disconnecting hoses, wires, and other connections before removing mounting hardware and the component itself.
Komatsu wh613 1 e0 telescopic handler service repair manual sn 395f61003 and upfjjskekdmmse
This document provides instructions for removing and installing parts for a telescopic handler model. It includes the following sections:
1. Structure and function which explains the components and how they work.
2. Testing and adjusting which describes checks before and after repairs and adjustments to be made.
3. Disassembly and assembly which explains the order and precautions for removing, installing, disassembling and assembling components.
The document provides detailed step-by-step instructions for removing and installing components like the engine hood, radiator hood, air filter, turbocharger, exhaust pipe, and fan belt. Safety precautions and notes are included throughout.
Komatsu wh613 1 telescopic handler service repair manual sn 395 f60003 and upfjjskekdmmse
This document provides removal and installation instructions for various components of a telescopic handler model, including the engine hood, air filter, turbocharger, exhaust pipe, generator and fan belt, radiator-exchanger assembly, muffler, battery and tray, cylinder head, and injectors. Removal and installation steps are provided for each component, typically involving disconnecting hoses, wires, and other connections before removing mounting hardware and the component itself.
John deere z trak f687 mower service repair manual (tm1678)fjjskekdmmse
This technical manual provides information for servicing a John Deere Z-Trak F620, F680, and F687. It contains sections on specifications, component locations, schematics, theory of operation, troubleshooting, diagnostics, tests, repairs, and attachments. The manual instructs technicians on performing checks and adjustments for issues like neutral creep, tracking, and control cable adjustments. Safety procedures are also outlined, such as proper lifting of equipment, safe battery and fluid handling, and working in ventilated areas.
John deere z trak f680 mower service repair manual (tm1678)fjjskekdmmse
This technical manual provides information for servicing a John Deere Z-Trak F620, F680, and F687. It contains sections on specifications, component locations, schematics, theory of operation, troubleshooting, diagnostics, tests, adjustments, and repairs. The manual instructs technicians to check that the machine does not creep in neutral, check and adjust tracking, and adjust the transmission drive pump dampener if needed to eliminate creep. It provides safety warnings and procedures for properly supporting the machine during maintenance.
The cherry: beauty, softness, its heart-shaped plastic has inspired artists since Antiquity. Cherries and strawberries were considered the fruits of paradise and thus represented the souls of men.
❼❷⓿❺❻❷❽❷❼❽ Dpboss Kalyan Satta Matka Guessing Matka Result Main Bazar chart Final Matka Satta Matta Matka 143 Kalyan Chart Satta fix Jodi Kalyan Final ank Matka Boss Satta 143 Matka 420 Golden Matka Final Satta Kalyan Penal Chart Dpboss 143 Guessing Kalyan Night Chart
This tutorial offers a step-by-step guide on how to effectively use Pinterest. It covers the basics such as account creation and navigation, as well as advanced techniques including creating eye-catching pins and optimizing your profile. The tutorial also explores collaboration and networking on the platform. With visual illustrations and clear instructions, this tutorial will equip you with the skills to navigate Pinterest confidently and achieve your goals.
This document announces the winners of the 2024 Youth Poster Contest organized by MATFORCE. It lists the grand prize and age category winners for grades K-6, 7-12, and individual age groups from 5 years old to 18 years old.
2. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 314D LCR EXCAVATOR BYJ
Configuration: 314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C4.2 Engine
Disassembly and Assembly
314D CR Hydraulic Excavator Machine Systems
Media Number -KENR6404-02 Publication Date -01/03/2010 Date Updated -14/03/2017
i04126149
Final Drive and Travel Motor - Disassemble
SMCS - 4050-015; 4351-015
Disassembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 3
B 1P-2420 Transmission Repair Stand 1
C 8T-6699 Bolts 2
D
1P-0074 Slide Hammer Puller Gp 1
4C-5666 Threaded Adapter 1
123-6702 Backlash Gauge Gp 1
E 1P-0510 Driver Gp 1
F 8H-0663 Bearing Puller Gp 1
G 1P-1863 Retaining Ring Pliers 1
H 9U-7346 Spanner Wrench As 1
Start By:
a. Remove the final drive and the travel motor. Refer to Disassembly and Assembly Manual ,
"Final Drive and Travel Motor - Remove".
NOTICE
1/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C4.2...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
3. Care must be taken to ensure that fluids are contained during
performance of inspection, maintenance, testing, adjusting, and repair
of the product. Be prepared to collect the fluid with suitable containers
before opening any compartment or disassembling any component
containing fluids.
Refer to Special Publication, NENG2500, "Dealer Service Tool
Catalog" for tools and supplies suitable to collect and contain fluids on
Cat products.
Dispose of all fluids according to local regulations and mandates.
Personal injury can result from hydraulic oil pressure and hot oil.
Hydraulic oil pressure can remain in the hydraulic system after the
engine has been stopped. Serious injury can be caused if this pressure is
not released before any service is done on the hydraulic system.
Make sure all of the work tools have been lowered to the ground, and
the oil is cool before removing any components or lines. Remove the oil
filler cap only when the engine is stopped, and the filler cap is cool
enough to touch with your bare hand.
1. Thoroughly clean the outside of the final drive and travel motor prior to disassembly.
2. Remove the sprocket from the final drive and the travel motor. The weight of the sprocket is
approximately 39 kg (85 lb).
3. Mark the alignment of the final drive and travel motor for reassembly purposes. The parts
must be reinstalled in the original locations.
2/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C4.2...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
4. Illustration 1 g00940682
4. Use Tooling (A) and a suitable lifting device to position the final drive and the travel motor
onto Tooling (B). The combined weight of the final drive and travel motor is approximately
170 kg (375 lb).
5. Drain the oil from the final drive into a suitable container for storage or for disposal. Refer
to Operation and Maintenance Manual, "Capacities (Refill)" for the capacity of the final
drive.
6. Remove fittings (1). Remove fittings (2) from traction control valve (3).
7. Remove nine bolts (4) that secure traction control valve (3) to the final drive.
8. Use two persons to remove traction control valve (3) from the final drive. The weight of
travel brake valve (3) is approximately 27 kg (60 lb).
3/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C4.2...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
5. Illustration 2 g00940716
9. Remove valve plate (5) and O-ring seal (6).
Illustration 3 g01405139
10. Use Tooling (D) to remove bearing (7).
Disassembly of the Counterbalance Valve
Illustration 4 g01405725
4/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C4.2...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
6. Illustration 5 g01405227
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
1. Position the counterbalance valve, as shown. Remove plug (8) and adapter (9).
2. Remove spring (10) and spool (11).
Illustration 6 g01405232
5/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C4.2...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
7. 3. Remove relief valve assemblies (12).
Illustration 7 g01405243
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
4. Remove seat (13). Seat (13) is pressed onto valve (17). Use new parts if seat (13) or valve
(17) is damaged. Do not disassemble these components. Make sure that you reuse the other
component.
5. Remove backup ring (14) and O-ring seal (15).
6. Remove O-ring seal (22).
7. Remove nut (20).
8. Remove screw (27).
9. Remove stopper (26). Remove backup ring (19) and O-ring seal (18) from stopper (19).
10. Remove valve (21), piston (25), and spring (16) from the housing.
11. Remove backup ring (23) and O-ring seal (24) from piston (25).
6/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C4.2...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
8. Illustration 8 g01405284
Illustration 9 g01405299
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove covers (28) and the O-ring seals.
13. Remove springs (29), guides (30), and spool assembly (31).
7/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C4.2...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
9. Illustration 10 g01405345
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
14. Remove valve (32), spring (33), and ball (34) from one end of spool (35). Repeat for the
other end of spool (35).
Illustration 11 g01405633
8/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C4.2...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
10. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
15. Remove plug (36), spring (38), and piston (39) from both sides of the housing assembly.
16. Remove O-ring seal (37) from each plug (36).
Note: Remove the remaining allen head bolts from the housing assembly for cleaning
purposes, if necessary. Each allen head bolt has an O-ring seal. Check the O-ring seal for
wear or for damage. Replace the O-ring seal, if necessary.
Disassembly of the Travel Motor
Illustration 12 g01405794
1. Remove O-ring seal (40) and springs (41).
9/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C4.2...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
11. Illustration 13 g01405828
2. Install Tooling (C) onto piston assembly (42). Use Tooling (C) and a suitable prybar to
remove piston assembly (42) from body (43).
Illustration 14 g01405855
3. Remove O-ring seals (45) and (46) from piston assembly (42). Remove backup rings (44)
and (47) from piston assembly (42).
10/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
12. Illustration 15 g01405867
4. Use suitable drivers or a suitable lever to remove guide assembly (48).
Illustration 16 g01405885
5. Remove O-ring seal (49) and backup ring (50) from guide assembly (48).
11/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
13. Illustration 17 g01406117
6. Remove four separator plates (51) and four friction plates (52). Note the alternating order of
separator plates (51) and friction plates (52) for assembly purposes.
Note: Do not allow the components of barrel assembly (53) to come apart while you
remove barrel assembly (53). The components of barrel assembly (53) must be reinstalled
into the original positions.
Note: Oil will drain from the final drive. Place a suitable container under the final drive for
storage or disposal. Refer to Operation and Maintenance Manual, "Capacities (Refill)" for
the fluid capacity of the final drive.
7. Position the final drive horizontally.
8. Remove barrel assembly (53).
12/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
14. Illustration 18 g01406180
Note: Mark the component locations for assembly purposes before you disassemble barrel
assembly (53).
9. Remove piston assemblies (54) and retainer (55) from barrel assembly (53).
Illustration 19 g01406210
Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
10. Remove retainer (56), spacer (57), and springs (58) from barrel assembly (53).
13/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
15. Illustration 20 g01406263
11. Put location marks on cam plate (59) for assembly purposes. Make sure that the thick end of
cam plate (59) is adjacent to the opening that is across body (43). Remove cam plate (59).
Illustration 21 g01406329
Illustration 22 g01406338
14/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
16. Personal injury can result from being struck by parts propelled by a
released spring force.
Make sure to wear all necessary protective equipment.
Follow the recommended procedure and use all recommended tooling to
release the spring force.
12. Remove piston (60) and spring (62).
13. Remove key (61).
Disassembly of the Final Drive
Illustration 23 g01406376
1. Use a suitable lifting device to position the final drive on Tooling (B), as shown. The weight
of the final drive is approximately 200 kg (441 lb).
2. Remove plugs (63). Remove the O-ring seals from plugs (63). Check the O-ring seals for
wear or for damage. Replace the O-ring seals, if necessary.
3. Remove bolts (65). Remove cover (64).
15/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
17. Illustration 24 g01406386
4. Raise the temperature of bolts (66) in order to loosen the thread sealant.
5. Remove bolts (66) and plate (67).
Illustration 25 g01406397
6. Remove sun gear (68).
16/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
18. Illustration 26 g01406400
7. Attach Tooling (A) and a suitable lifting device to carrier assembly (69). Remove carrier
assembly (69), planetary gear assembly (70), and bearing assembly (71) as a unit.
Illustration 27 g01406789
8. Remove planetary gear (70) and bearing assembly (71) from carrier assembly (69). Remove
the remaining planetary gears (70) and bearings (71).
Illustration 28 g01406822
9. Remove sun gear (72).
17/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
19. 10. Raise the temperature of bolts (73) in order to loosen the thread sealant. Remove bolts (73).
Remove plate (74).
Illustration 29 g01406850
11. Remove retaining ring (75) from sun gear (72). Check retaining ring (75) for wear or for
damage. Replace retaining ring (75), if necessary.
Illustration 30 g01406853
12. Remove planetary gear (76).
18/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
20. Illustration 31 g01406875
13. Remove bearing (77), race (78), and thrust washer (79).
14. Repeat Steps 12 and 13 in order to remove the remaining planetary gear assemblies.
Illustration 32 g01406882
15. Remove bolt (80) and plate (81).
19/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
21. Illustration 33 g01406885
Illustration 34 g01406886
16. Use Tooling (H) to remove nut (82).
Illustration 35 g01406906
17. Install Tooling (A) and a suitable lifting device to housing (83). The weight of housing (83)
is approximately 35 kg (77 lb).
18. Remove housing (83) from body assembly (84).
20/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
22. Illustration 36 g01406912
19. Remove Duo-Cone Seal Gp seal (85) from the body assembly. Remove the Duo-Cone Seal
Gp seal from the housing.
Illustration 37 g01407100
20. Remove both bearings (86) from housing (83).
21/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
23. Illustration 38 g01407089
21. Remove both bearings (87) from housing (83).
Illustration 39 g01407115
22. Position body assembly (84) horizontally. Remove shaft assembly (88), the bearing, and the
retaining ring.
22/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
24. Illustration 40 g01407144
23. Use Tooling (G) to remove retaining ring (89) from shaft assembly (88).
Illustration 41 g01407161
24. Use Tooling (E), Tooling (F), and a suitable press to remove bearing (90).
Illustration 42 g01407166
25. Remove lip seal (91) from the body assembly.
Copyright 1993 - 2020 Caterpillar Inc.
All Rights Reserved.
Private Network For SIS Licensees.
Thu May 21 09:55:26 UTC+0800 2020
23/23314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
25. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
26. Shutdown SIS
Previous Screen
Product: EXCAVATOR
Model: 314D LCR EXCAVATOR BYJ
Configuration: 314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C4.2 Engine
Disassembly and Assembly
314D CR Hydraulic Excavator Machine Systems
Media Number -KENR6404-02 Publication Date -01/03/2010 Date Updated -14/03/2017
i07269885
Final Drive and Travel Motor - Assemble
SMCS - 4050-016; 4351-016
Assembly Procedure
Table 1
Required Tools
Tool Part Number Part Description Qty
A 138-7573 Link Bracket 3
B 1P-2420 Transmission Repair Stand 1
E 1P-0510 Driver Gp 1
F 8H-0663 Bearing Puller Gp 1
G 1P-1863 Retaining Ring Pliers 1
H 9U-7346 Spanner Wrench As 1
K 1U-7558 Mounting Adapter Gp(1)
1
L - Loctite 271 -
M - Loctite High Flex GM -
N 169-0503 Installation Kit 1
P 1U-6434 Duo-Cone Seal Installer As 1
Q 4C-3761 C-Clamp 2
R FT-2766 Rolling Torque Bar 1
S - Loctite 272 -
(1)
1/24314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C4.2...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
27. The bent plates for the mounting adapter may be modified so that the mounting adapter can be assembled to the
housing.
Assembly Procedure for the Final Drive
Illustration 1 g01407166
1. Use Tooling (E) to install lip seal (91) into the body assembly.
Illustration 2 g01407561
2. Use Tooling (E), Tooling (F), and a suitable press to install bearing assembly (90) onto shaft
assembly (88).
2/24314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C4.2...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...
28. Illustration 3 g01407144
3. Use Tooling (G) to install retaining ring (89) on shaft assembly (88).
Illustration 4 g01407580
4. Use a suitable soft faced hammer to install shaft assembly (88) into body assembly (84).
Illustration 5 g01407608
3/24314D CR & 314D LCR Excavators BYJ00001-UP (MACHINE) POWERED BY C4.2...
2020/5/21https://127.0.0.1/sisweb/sisweb/techdoc/techdoc_print_page.jsp?returnurl=/sis...