This document is a service manual for Case tractor loader backhoes models 580N, 580SN, 580SN WT, 590SN from years 2015-present. It contains information on engine systems, transmission, front and rear axles, brakes, hydraulic systems, frames, steering, wheels, cab climate control, electrical systems, front loader/bucket, booms/dippers/buckets, and safety procedures. The document provides part numbers and instructions for maintenance and repair of components. Safety precautions are included to prevent injury when servicing equipment.
New holland t6.175 dynamic command tier 4 b (final) tractor service repair ma...fusjjefjkskemem
This document is a service manual for New Holland T6 tractor models from 125-180 HP covering Tier 4B and Stage IV emissions regulations. It provides an overview and breakdown of the tractor systems, listing component groups for the engine, transmission, axles, hydraulics, electrical systems, and more. The manual includes over 90 sections that cover the technical details, specifications, and repair procedures for the various tractor parts and assemblies.
Case ih magnum™ 380 cvt tier 4 b tractor service repair manual instant downlo...fudjjskekemmme
This document is a service manual for Magnum 250-380 and Rowtrac 310-380 tractors with continuously variable transmissions (CVTs). It contains sections covering the engine, transmission, drivetrain components, hydraulics, hitches and implements, steering, wheels, tracks, cab climate control, and electrical systems. The manual provides maintenance and repair information for technicians working on these tractors.
Case ih magnum™ 380 rowtrac™ cvt tier 4 b tractor service repair manual insta...fudjjskekemmme
This document is a service manual for Magnum tractor models 250, 280, 310, 340, 380 and their Rowtrac variants, covering topics such as the engine, transmission, axles, hydraulics, electrical systems, and more. It provides repair and maintenance instructions for qualified service personnel, using proper safety precautions and specialized tools when working on the equipment. The manual includes an introduction with safety rules and lists the engine, transmission, and other components covered for each model and market.
Case ih magnum™ 340 cvt tier 4 b tractor service repair manual instant downlo...ufsjejfsekeme
This document is a service manual for Magnum 250-380 and Rowtrac 310-380 tractors with continuously variable transmissions (CVTs). It contains sections covering the engine, transmission, drivetrain components, hydraulics, hitches and implements, steering, wheels, tracks, cab climate control, and electrical systems. The manual provides maintenance and repair information for technicians on these tractor models.
Case ih magnum™ 340 rowtrac™ cvt tier 4 b tractor service repair manual insta...fudjjskekemmme
This document is a service manual for Magnum 250-380 and Rowtrac 310-380 tractors with continuously variable transmissions (CVTs). It contains sections covering the engine, transmission, drivetrain components, hydraulics, hitches and implements, steering, wheels, tracks, cab climate control, and electrical systems. The manual provides maintenance and repair information for technicians on these tractor models.
Volvo sd116 dx single drum roller service repair manualjfjkskefksmem
The document provides information on the steering system, components, and procedures for a machine model COS SD116DX. It describes the steering system components including the steering wheel, cylinders, control unit, and pump. It also provides troubleshooting information for common steering issues and their potential causes. Procedures are outlined for checking and adjusting steering pressure, removing and installing the steering cylinder. Diagrams show the location of steering components and procedures for servicing.
Volvo sd110 single drum roller service repair manualjfjkskefksmem
The machine frame consists of a rear frame assembly, front frame assembly, and swivel frame connecting the two. The rear frame supports components like tanks and engines, while the front frame supports the drum assembly.
The drum has a smooth surface and transmits vibration to loosen material via an eccentric assembly powered by a hydraulic motor.
Removing the drum assembly involves disconnecting hoses, loosening mounting bolts, lifting out the assembly which weighs nearly 4 tons, and removing vibration and drive side mounts. Installing follows the reverse process.
Volvo ec340 excavator service repair manualjfjkskefksmem
1. The document provides instructions for installing a counterweight on an excavator. It describes attaching lifting tools and straps to lift the 6,400 kg counterweight into place and securing it with screws.
2. The instructions are also provided for removing the counterweight, which include attaching lifting tools and straps, loosening screws, and carefully lifting the counterweight away.
3. Additional documents provide descriptions of the excavator's undercarriage and tracks, as well as instructions for installing and removing the idler and drive sprocket. Safety warnings are included throughout regarding the heavy lifting involved.
New holland t6.175 dynamic command tier 4 b (final) tractor service repair ma...fusjjefjkskemem
This document is a service manual for New Holland T6 tractor models from 125-180 HP covering Tier 4B and Stage IV emissions regulations. It provides an overview and breakdown of the tractor systems, listing component groups for the engine, transmission, axles, hydraulics, electrical systems, and more. The manual includes over 90 sections that cover the technical details, specifications, and repair procedures for the various tractor parts and assemblies.
Case ih magnum™ 380 cvt tier 4 b tractor service repair manual instant downlo...fudjjskekemmme
This document is a service manual for Magnum 250-380 and Rowtrac 310-380 tractors with continuously variable transmissions (CVTs). It contains sections covering the engine, transmission, drivetrain components, hydraulics, hitches and implements, steering, wheels, tracks, cab climate control, and electrical systems. The manual provides maintenance and repair information for technicians working on these tractors.
Case ih magnum™ 380 rowtrac™ cvt tier 4 b tractor service repair manual insta...fudjjskekemmme
This document is a service manual for Magnum tractor models 250, 280, 310, 340, 380 and their Rowtrac variants, covering topics such as the engine, transmission, axles, hydraulics, electrical systems, and more. It provides repair and maintenance instructions for qualified service personnel, using proper safety precautions and specialized tools when working on the equipment. The manual includes an introduction with safety rules and lists the engine, transmission, and other components covered for each model and market.
Case ih magnum™ 340 cvt tier 4 b tractor service repair manual instant downlo...ufsjejfsekeme
This document is a service manual for Magnum 250-380 and Rowtrac 310-380 tractors with continuously variable transmissions (CVTs). It contains sections covering the engine, transmission, drivetrain components, hydraulics, hitches and implements, steering, wheels, tracks, cab climate control, and electrical systems. The manual provides maintenance and repair information for technicians on these tractor models.
Case ih magnum™ 340 rowtrac™ cvt tier 4 b tractor service repair manual insta...fudjjskekemmme
This document is a service manual for Magnum 250-380 and Rowtrac 310-380 tractors with continuously variable transmissions (CVTs). It contains sections covering the engine, transmission, drivetrain components, hydraulics, hitches and implements, steering, wheels, tracks, cab climate control, and electrical systems. The manual provides maintenance and repair information for technicians on these tractor models.
Volvo sd116 dx single drum roller service repair manualjfjkskefksmem
The document provides information on the steering system, components, and procedures for a machine model COS SD116DX. It describes the steering system components including the steering wheel, cylinders, control unit, and pump. It also provides troubleshooting information for common steering issues and their potential causes. Procedures are outlined for checking and adjusting steering pressure, removing and installing the steering cylinder. Diagrams show the location of steering components and procedures for servicing.
Volvo sd110 single drum roller service repair manualjfjkskefksmem
The machine frame consists of a rear frame assembly, front frame assembly, and swivel frame connecting the two. The rear frame supports components like tanks and engines, while the front frame supports the drum assembly.
The drum has a smooth surface and transmits vibration to loosen material via an eccentric assembly powered by a hydraulic motor.
Removing the drum assembly involves disconnecting hoses, loosening mounting bolts, lifting out the assembly which weighs nearly 4 tons, and removing vibration and drive side mounts. Installing follows the reverse process.
Volvo ec340 excavator service repair manualjfjkskefksmem
1. The document provides instructions for installing a counterweight on an excavator. It describes attaching lifting tools and straps to lift the 6,400 kg counterweight into place and securing it with screws.
2. The instructions are also provided for removing the counterweight, which include attaching lifting tools and straps, loosening screws, and carefully lifting the counterweight away.
3. Additional documents provide descriptions of the excavator's undercarriage and tracks, as well as instructions for installing and removing the idler and drive sprocket. Safety warnings are included throughout regarding the heavy lifting involved.
Volvo sd77 f single drum roller service repair manualjfjkskefksmem
This document provides instructions for removing a hydraulic motor from a machine. It describes draining the oil from the rear axle, disconnecting electrical and hydraulic connections from the motor, and removing mounting bolts. Safety precautions are noted, including using lifting devices with adequate capacity and handling fluids safely. Reinstallation involves reversing these steps, including reconnecting lines and bolts, refilling oil, and testing operation.
Mc cormick xtx145 tractor operator manualjfjkskefksmem
This document is the operators manual for XTX Series tractors, models XTX145 through XTX215. It contains chapters on safety precautions, operating controls, instruments and programming, operation, maintenance, and technical specifications. Safety is the top priority, with warnings about potential hazards and safety symbols explained. Controls, instruments, functions, and standard operation are outlined. Routine maintenance procedures and schedules are provided to keep the tractor in good working order.
Volvo ec330 c ld ec330cld excavator service repair manualjfjkskefksmem
1. The document provides instructions for removing the counterweight from an excavator. It describes removing covers and plugs from the top of the counterweight, installing eye bolts, and attaching lifting cables or slings to lift the counterweight.
2. Specific steps include removing screws securing the engine room under cover, and then removing lock nuts and nuts using socket wrenches or a power wrench.
3. The counterweight is then lifted slightly to check for safety, before fully lifting it up and out of position. Warnings are given about the heavy weight and ensuring no one is underneath during lifting.
Mc cormick mc95 tractor operator manualjfjkskefksmem
This document is an operators manual for McCormick tractors models MC95, MC105, MC115, MC120Power6 and MC135Power6. It discusses McCormick's commitment to quality, with dealers guaranteeing tractors are delivered in top condition. It also notes the purchase provides a state-of-the-art tractor of the highest quality, and regular maintenance is important for continued value, operation and reliability. The manual then provides a table of contents outlining what will be covered such as safety precautions, instruments and controls, general and field operation, servicing, and specifications.
Kubota v3800 di t-e3cb diesel engine service repair manualjfjkskefksmem
This document provides specifications and maintenance information for several Kubota diesel engine models:
- It lists technical specifications such as engine type, displacement, power output, lubrication system, and dimensions for each model.
- The maintenance section outlines checklists and maintenance schedules, with inspection points divided into daily, 50-hour, 250-hour, 1000-hour, and longer intervals.
- Safety instructions are provided to warn technicians of hazards when servicing the engines.
Kubota v3300 e3 bg diesel engine service repair manualjfjkskefksmem
This document provides specifications for several Kubota diesel engine models including the V3600-E3B, V3600-T-E3B, V3800DI-T-E3B, V3300-E3BG, V3600-T-E3BG, and V3800DI-T-E3BG. It lists technical details such as the number of cylinders, displacement, power output, operating speed range, lubrication system, cooling system, and dimensions. The specifications are divided into standard engine specifications and conversion formulas.
Volvo ec235 d nl ec235dnl excavator service repair manualjfjkskefksmem
The document provides information on replacing the track unit of an excavator. It begins with instructions to park the machine and stop the engine to release hydraulic pressure. Next, it describes removing pins and the track from the sprocket and idler wheels. The final step instructs installing the new track by reversing the removal process and ensuring proper tension.
Volvo ec235 c nl ec235cnl excavator service repair manualjfjkskefksmem
The document provides information on servicing a track gearbox, including:
1. It describes the multi-stage planetary gearbox that reduces the speed and increases the torque from the hydraulic motor.
2. Maintenance procedures like checking the oil level and replacing the oil are outlined, as well as precautions for installation and operation.
3. Troubleshooting tips are provided for issues like abnormal sounds, temperatures, and leakages, along with the appropriate repairs.
Volvo ec235 c ld ec235cld excavator service repair manualjfjkskefksmem
The document provides information on servicing a track gearbox, including:
1. It describes the multi-stage planetary gearbox that reduces hydraulic motor speed and increases torque.
2. It provides details on port connections, rotational directions, lubrication requirements, and maintenance procedures like checking oil levels and replacing the gearbox cover.
3. Troubleshooting tips are given for issues like abnormal sounds, temperatures, and oil leakage from seals or joints. Replacement criteria are outlined for worn parts.
Volvo ec220 d nl ec220dnl excavator service repair manualjfjkskefksmem
1) The excavator's power transmission system transmits power from the engine to hydraulic pumps, then to hydraulic motors that power travel, swing, and attachments.
2) The track gearbox uses a two-stage planetary gear mechanism to reduce the speed of the hydraulic motor and increase torque to the sprocket.
3) Proper maintenance of the track gearbox includes following specifications for lubrication oil changes, torque values, and replacement of worn parts.
Volvo ec220 d n ec220dn excavator service repair manualjfjkskefksmem
The document provides instructions for replacing the floating seal on a track gearbox that has been removed from the excavator. It describes draining the oil from the gearbox and removing the cover. It explains how to clean and apply sealing compound to the mounting surface before installing the new cover. It also notes the need to refill the gearbox with the specified amount of oil.
Volvo ec220 d lr ec220dlr excavator service repair manualjfjkskefksmem
- The document provides instructions for replacing the counterweight on an excavator.
- It describes removing covers and brackets from the top of the counterweight, disconnecting wiring, and using cables to lift the counterweight off the excavator.
- The instructions then cover installing the new counterweight, reattaching wiring and brackets, and securing the counterweight in place with mounting screws.
Mc cormick xtx165 tractor operator manualjfjkskefksmem
This document is the operators manual for XTX Series tractors, including models XTX145, XTX165, XTX185, XTX200, and XTX215. It contains chapters on safety precautions, operating controls, instruments and programming, operation, maintenance, electrical systems, and technical specifications. Safety is the top priority, with warnings about potential hazards and safety symbols explained. Controls, functions, and basic operation are outlined. Routine maintenance procedures are included to keep the tractor in good working order.
Mc cormick mtx120 tractor operator manualjfjkskefksmem
This document is an operators manual for McCormick MTX120, MTX135, and MTX150 tractors from serial number JJE3336280 onwards. It contains chapters on safety precautions, operating controls, instruments and programming, operation, tires wheels and ballasting, and maintenance. The manual provides instructions and specifications to safely operate the tractors and maintain them. It covers topics like safety symbols, controls, instrumentation displays, transmission operation, three point hitch use, ballasting, and maintenance schedules.
Mc cormick mc105 tractor operator manualjfjkskefksmem
This document is an operators manual for McCormick tractors models MC95, MC105, MC115, MC120Power6 and MC135Power6. It discusses McCormick's commitment to quality, with dealers guaranteeing tractors are delivered in top condition. The purchase of a McCormick tractor ensures a state-of-the-art machine of the highest quality. The manual provides instructions on operation, safety precautions, instruments and controls, field operation, routine servicing, and specifications. It is intended to ensure safe and proper use of the tractor.
Kubota v3600 e3 b diesel engine service repair manualjfjkskefksmem
This document provides specifications for several Kubota diesel engine models including the V3600-E3B, V3600-T-E3B, V3800DI-T-E3B, V3300-E3BG, V3600-T-E3BG, and V3800DI-T-E3BG. It lists technical details such as the number of cylinders, displacement, power output, operating speed range, lubrication system, cooling system, and dimensions. The specifications are divided into standard engine specifications and conversion formulas.
Hitachi zaxis 240 lch excavator service repair manualjfjkskefksmem
This document contains three manuals: a Service Manual, a Technical Manual, and a Workshop Manual for an excavator. The Service Manual consists of three separate volumes: the first covers introduction and safety information, the second covers technical information and operational principles, and the third covers troubleshooting. The document provides summaries of the contents of each volume and manual. It also includes tables of conversion factors for different units of measurement.
Hitachi zaxis 240 h excavator service repair manualjfjkskefksmem
This document contains three manuals: a Service Manual, a Technical Manual, and a Workshop Manual for an excavator. The Service Manual consists of three separate volumes: the first covers introduction and safety information, the second covers technical information and operational principles, and the third covers troubleshooting. The document provides summaries of the contents of each volume and manual. It also includes tables of conversion factors for different units of measurement.
Hitachi zaxis 135 usl 3 class hydraulic excavator service repair manualjfjkskefksmem
This document provides safety information and guidelines for operating heavy machinery. It discusses recognizing safety symbols and signals, following safety instructions, preparing for emergencies, wearing protective clothing, protecting against noise, inspecting machines, using handholds and steps safely, adjusting the operator's seat, ensuring safety before leaving the seat, fastening seat belts, moving and operating machines safely, handling starting aids safely, keeping riders off machines, investigating job sites beforehand, and more. The document emphasizes operating safely, avoiding hazards that could cause injury or death to the operator or bystanders.
Case sv185 skid steer loader operation manualjfjkskefksmem
This document is an operator's manual for Alpha Series skid steer loaders and compact track loaders. It provides information on safety, controls, operation, transport, working operations, and maintenance. The manual contains instructions on starting and operating the machine, transporting procedures, attaching working tools, and performing routine maintenance. Safety practices and precautions are emphasized throughout.
This document announces the winners of the 2024 Youth Poster Contest organized by MATFORCE. It lists the grand prize and age category winners for grades K-6, 7-12, and individual age groups from 5 years old to 18 years old.
This tutorial offers a step-by-step guide on how to effectively use Pinterest. It covers the basics such as account creation and navigation, as well as advanced techniques including creating eye-catching pins and optimizing your profile. The tutorial also explores collaboration and networking on the platform. With visual illustrations and clear instructions, this tutorial will equip you with the skills to navigate Pinterest confidently and achieve your goals.
Volvo sd77 f single drum roller service repair manualjfjkskefksmem
This document provides instructions for removing a hydraulic motor from a machine. It describes draining the oil from the rear axle, disconnecting electrical and hydraulic connections from the motor, and removing mounting bolts. Safety precautions are noted, including using lifting devices with adequate capacity and handling fluids safely. Reinstallation involves reversing these steps, including reconnecting lines and bolts, refilling oil, and testing operation.
Mc cormick xtx145 tractor operator manualjfjkskefksmem
This document is the operators manual for XTX Series tractors, models XTX145 through XTX215. It contains chapters on safety precautions, operating controls, instruments and programming, operation, maintenance, and technical specifications. Safety is the top priority, with warnings about potential hazards and safety symbols explained. Controls, instruments, functions, and standard operation are outlined. Routine maintenance procedures and schedules are provided to keep the tractor in good working order.
Volvo ec330 c ld ec330cld excavator service repair manualjfjkskefksmem
1. The document provides instructions for removing the counterweight from an excavator. It describes removing covers and plugs from the top of the counterweight, installing eye bolts, and attaching lifting cables or slings to lift the counterweight.
2. Specific steps include removing screws securing the engine room under cover, and then removing lock nuts and nuts using socket wrenches or a power wrench.
3. The counterweight is then lifted slightly to check for safety, before fully lifting it up and out of position. Warnings are given about the heavy weight and ensuring no one is underneath during lifting.
Mc cormick mc95 tractor operator manualjfjkskefksmem
This document is an operators manual for McCormick tractors models MC95, MC105, MC115, MC120Power6 and MC135Power6. It discusses McCormick's commitment to quality, with dealers guaranteeing tractors are delivered in top condition. It also notes the purchase provides a state-of-the-art tractor of the highest quality, and regular maintenance is important for continued value, operation and reliability. The manual then provides a table of contents outlining what will be covered such as safety precautions, instruments and controls, general and field operation, servicing, and specifications.
Kubota v3800 di t-e3cb diesel engine service repair manualjfjkskefksmem
This document provides specifications and maintenance information for several Kubota diesel engine models:
- It lists technical specifications such as engine type, displacement, power output, lubrication system, and dimensions for each model.
- The maintenance section outlines checklists and maintenance schedules, with inspection points divided into daily, 50-hour, 250-hour, 1000-hour, and longer intervals.
- Safety instructions are provided to warn technicians of hazards when servicing the engines.
Kubota v3300 e3 bg diesel engine service repair manualjfjkskefksmem
This document provides specifications for several Kubota diesel engine models including the V3600-E3B, V3600-T-E3B, V3800DI-T-E3B, V3300-E3BG, V3600-T-E3BG, and V3800DI-T-E3BG. It lists technical details such as the number of cylinders, displacement, power output, operating speed range, lubrication system, cooling system, and dimensions. The specifications are divided into standard engine specifications and conversion formulas.
Volvo ec235 d nl ec235dnl excavator service repair manualjfjkskefksmem
The document provides information on replacing the track unit of an excavator. It begins with instructions to park the machine and stop the engine to release hydraulic pressure. Next, it describes removing pins and the track from the sprocket and idler wheels. The final step instructs installing the new track by reversing the removal process and ensuring proper tension.
Volvo ec235 c nl ec235cnl excavator service repair manualjfjkskefksmem
The document provides information on servicing a track gearbox, including:
1. It describes the multi-stage planetary gearbox that reduces the speed and increases the torque from the hydraulic motor.
2. Maintenance procedures like checking the oil level and replacing the oil are outlined, as well as precautions for installation and operation.
3. Troubleshooting tips are provided for issues like abnormal sounds, temperatures, and leakages, along with the appropriate repairs.
Volvo ec235 c ld ec235cld excavator service repair manualjfjkskefksmem
The document provides information on servicing a track gearbox, including:
1. It describes the multi-stage planetary gearbox that reduces hydraulic motor speed and increases torque.
2. It provides details on port connections, rotational directions, lubrication requirements, and maintenance procedures like checking oil levels and replacing the gearbox cover.
3. Troubleshooting tips are given for issues like abnormal sounds, temperatures, and oil leakage from seals or joints. Replacement criteria are outlined for worn parts.
Volvo ec220 d nl ec220dnl excavator service repair manualjfjkskefksmem
1) The excavator's power transmission system transmits power from the engine to hydraulic pumps, then to hydraulic motors that power travel, swing, and attachments.
2) The track gearbox uses a two-stage planetary gear mechanism to reduce the speed of the hydraulic motor and increase torque to the sprocket.
3) Proper maintenance of the track gearbox includes following specifications for lubrication oil changes, torque values, and replacement of worn parts.
Volvo ec220 d n ec220dn excavator service repair manualjfjkskefksmem
The document provides instructions for replacing the floating seal on a track gearbox that has been removed from the excavator. It describes draining the oil from the gearbox and removing the cover. It explains how to clean and apply sealing compound to the mounting surface before installing the new cover. It also notes the need to refill the gearbox with the specified amount of oil.
Volvo ec220 d lr ec220dlr excavator service repair manualjfjkskefksmem
- The document provides instructions for replacing the counterweight on an excavator.
- It describes removing covers and brackets from the top of the counterweight, disconnecting wiring, and using cables to lift the counterweight off the excavator.
- The instructions then cover installing the new counterweight, reattaching wiring and brackets, and securing the counterweight in place with mounting screws.
Mc cormick xtx165 tractor operator manualjfjkskefksmem
This document is the operators manual for XTX Series tractors, including models XTX145, XTX165, XTX185, XTX200, and XTX215. It contains chapters on safety precautions, operating controls, instruments and programming, operation, maintenance, electrical systems, and technical specifications. Safety is the top priority, with warnings about potential hazards and safety symbols explained. Controls, functions, and basic operation are outlined. Routine maintenance procedures are included to keep the tractor in good working order.
Mc cormick mtx120 tractor operator manualjfjkskefksmem
This document is an operators manual for McCormick MTX120, MTX135, and MTX150 tractors from serial number JJE3336280 onwards. It contains chapters on safety precautions, operating controls, instruments and programming, operation, tires wheels and ballasting, and maintenance. The manual provides instructions and specifications to safely operate the tractors and maintain them. It covers topics like safety symbols, controls, instrumentation displays, transmission operation, three point hitch use, ballasting, and maintenance schedules.
Mc cormick mc105 tractor operator manualjfjkskefksmem
This document is an operators manual for McCormick tractors models MC95, MC105, MC115, MC120Power6 and MC135Power6. It discusses McCormick's commitment to quality, with dealers guaranteeing tractors are delivered in top condition. The purchase of a McCormick tractor ensures a state-of-the-art machine of the highest quality. The manual provides instructions on operation, safety precautions, instruments and controls, field operation, routine servicing, and specifications. It is intended to ensure safe and proper use of the tractor.
Kubota v3600 e3 b diesel engine service repair manualjfjkskefksmem
This document provides specifications for several Kubota diesel engine models including the V3600-E3B, V3600-T-E3B, V3800DI-T-E3B, V3300-E3BG, V3600-T-E3BG, and V3800DI-T-E3BG. It lists technical details such as the number of cylinders, displacement, power output, operating speed range, lubrication system, cooling system, and dimensions. The specifications are divided into standard engine specifications and conversion formulas.
Hitachi zaxis 240 lch excavator service repair manualjfjkskefksmem
This document contains three manuals: a Service Manual, a Technical Manual, and a Workshop Manual for an excavator. The Service Manual consists of three separate volumes: the first covers introduction and safety information, the second covers technical information and operational principles, and the third covers troubleshooting. The document provides summaries of the contents of each volume and manual. It also includes tables of conversion factors for different units of measurement.
Hitachi zaxis 240 h excavator service repair manualjfjkskefksmem
This document contains three manuals: a Service Manual, a Technical Manual, and a Workshop Manual for an excavator. The Service Manual consists of three separate volumes: the first covers introduction and safety information, the second covers technical information and operational principles, and the third covers troubleshooting. The document provides summaries of the contents of each volume and manual. It also includes tables of conversion factors for different units of measurement.
Hitachi zaxis 135 usl 3 class hydraulic excavator service repair manualjfjkskefksmem
This document provides safety information and guidelines for operating heavy machinery. It discusses recognizing safety symbols and signals, following safety instructions, preparing for emergencies, wearing protective clothing, protecting against noise, inspecting machines, using handholds and steps safely, adjusting the operator's seat, ensuring safety before leaving the seat, fastening seat belts, moving and operating machines safely, handling starting aids safely, keeping riders off machines, investigating job sites beforehand, and more. The document emphasizes operating safely, avoiding hazards that could cause injury or death to the operator or bystanders.
Case sv185 skid steer loader operation manualjfjkskefksmem
This document is an operator's manual for Alpha Series skid steer loaders and compact track loaders. It provides information on safety, controls, operation, transport, working operations, and maintenance. The manual contains instructions on starting and operating the machine, transporting procedures, attaching working tools, and performing routine maintenance. Safety practices and precautions are emphasized throughout.
This document announces the winners of the 2024 Youth Poster Contest organized by MATFORCE. It lists the grand prize and age category winners for grades K-6, 7-12, and individual age groups from 5 years old to 18 years old.
This tutorial offers a step-by-step guide on how to effectively use Pinterest. It covers the basics such as account creation and navigation, as well as advanced techniques including creating eye-catching pins and optimizing your profile. The tutorial also explores collaboration and networking on the platform. With visual illustrations and clear instructions, this tutorial will equip you with the skills to navigate Pinterest confidently and achieve your goals.
The cherry: beauty, softness, its heart-shaped plastic has inspired artists since Antiquity. Cherries and strawberries were considered the fruits of paradise and thus represented the souls of men.
Hadj Ounis's most notable work is his sculpture titled "Metamorphosis." This piece showcases Ounis's mastery of form and texture, as he seamlessly combines metal and wood to create a dynamic and visually striking composition. The juxtaposition of the two materials creates a sense of tension and harmony, inviting viewers to contemplate the relationship between nature and industry.
Heart Touching Romantic Love Shayari In English with ImagesShort Good Quotes
Explore our beautiful collection of Romantic Love Shayari in English to express your love. These heartfelt shayaris are perfect for sharing with your loved one. Get the best words to show your love and care.
Fashionista Chic Couture Maze & Coloring Adventures is a coloring and activity book filled with many maze games and coloring activities designed to delight and engage young fashion enthusiasts. Each page offers a unique blend of fashion-themed mazes and stylish illustrations to color, inspiring creativity and problem-solving skills in children.
9. INTRODUCTION
Foreword - Important notice regarding equipment servicing
All repair and maintenance work listed in this manual must be carried out only by qualified dealership personnel,
strictly complying with the instructions given, and using, whenever possible, the special tools.
Anyone who performs repair and maintenance operations without complying with the procedures provided herein
shall be responsible for any subsequent damages.
The manufacturer and all the organizations of its distribution chain, including - without limitation - national, regional, or
local dealers, reject any responsibility for damages caused by parts and/or components not approved by the manu-
facturer, including those used for the servicing or repair of the product manufactured or marketed by the manufacturer.
In any case, no warranty is given or attributed on the product manufactured or marketed by the manufacturer in case
of damages caused by parts and/or components not approved by the manufacturer.
The manufacturer reserves the right to make improvements in design and changes in specifications at any time without
notice and without incurring any obligation to install them on units previously sold. Specifications, descriptions, and
illustrative material herein are as accurate as known at time of publication but are subject to change without notice.
In case of questions, refer to your CASE CONSTRUCTION Sales and Service Networks.
47860801 25/03/2015
3
10. INTRODUCTION
Safety rules
Personal safety
This is the safety alert symbol. It is used to alert you to potential personal injury hazards. Obey all
safety messages that follow this symbol to avoid possible death or injury.
Throughout this manual you will find the signal words DANGER, WARNING, and CAUTION followed by special in-
structions. These precautions are intended for the personal safety of you and those working with you.
Read and understand all the safety messages in this manual before you operate or service the machine.
DANGER indicates a hazardous situation that, if not avoided, will result in death or serious injury.
WARNING indicates a hazardous situation that, if not avoided, could result in death or serious injury.
CAUTION indicates a hazardous situation that, if not avoided, could result in minor or moderate injury.
FAILURE TO FOLLOW DANGER, WARNING, AND CAUTION MESSAGES COULD RESULT
IN DEATH OR SERIOUS INJURY.
Machine safety
NOTICE: Notice indicates a situation that, if not avoided, could result in machine or property damage.
Throughout this manual you will find the signal word Notice followed by special instructions to prevent machine or
property damage. The word Notice is used to address practices not related to personal safety.
Information
NOTE: Note indicates additional information that clarifies steps, procedures, or other information in this manual.
Throughout this manual you will find the word Note followed by additional information about a step, procedure, or
other information in the manual. The word Note is not intended to address personal safety or property damage.
47860801 25/03/2015
4
11. INTRODUCTION
Safety rules
Unless otherwise instructed, always perform these steps before you service the machine:
1. Park the machine on a flat, level surface.
2. Place the backhoe in the transport position with the swing lock pin installed for transport.
3. Place the loader bucket on the ground, with the bottom of the loader bucket parallel to the surface.
4. Place the direction control lever and the transmission in neutral.
5. If you need to open the hood to perform service, raise the loader arms and install the support strut.
6. Shut down the engine.
7. Place a 'Do Not Operate' tag on the key switch so that it is visible to other workers or remove the key.
47860801 25/03/2015
5
12. INTRODUCTION
Safety rules - Ductile iron
DANGER
Altering cast ductile iron can cause it to weaken or break.
Before you weld, cut, or drill holes on any part of this machine, make sure that the part is not cast
ductile iron.
Failure to comply will result in death or serious injury.
D0148A
Altering cast ductile iron can cause it to weaken or break. Unauthorized modifications to cast ductile iron parts can
cause death or serious injury. Do not weld, cut, drill, repair, or attach items to cast ductile iron parts on this machine.
Before you weld, cut, or drill holes on any part of this machine, make sure the part is not cast ductile iron. See your
dealer if you do not know if a part is cast ductile iron.
The following items are examples of cast ductile iron parts. There may also be other parts made of cast ductile
iron that are not on the list below.
• two-wheel drive steering link
• dump links
• front axle
• stabilizers
• extend-a-hoe
• swing tower
• bucket linkage
• Air-Conditioning (A/C) compressor mounting bracket
Do not make any unauthorized modifications. Consult an authorized dealer before making any changes, additions,
or modifications to this machine.
47860801 25/03/2015
6
13. INTRODUCTION
Safety rules - Ecology and the environment
Soil, air, and water quality is important for all industries and life in general. When legislation does not yet rule the
treatment of some of the substances that advanced technology requires, sound judgment should govern the use and
disposal of products of a chemical and petrochemical nature.
Familiarize yourself with the relative legislation applicable to your country, and make sure that you understand this
legislation. Where no legislation exists, obtain information from suppliers of oils, filters, batteries, fuels, anti-freeze,
cleaning agents, etc., with regard to the effect of these substances on man and nature and how to safely store, use,
and dispose of these substances.
Helpful hints
• Avoid the use of cans or other inappropriate pressurized fuel delivery systems to fill tanks. Such delivery systems
may cause considerable spillage.
• In general, avoid skin contact with all fuels, oils, acids, solvents, etc. Most of these products contain substances
that may be harmful to your health.
• Modern oils contain additives. Do not burn contaminated fuels and or waste oils in ordinary heating systems.
• Avoid spillage when you drain fluids such as used engine coolant mixtures, engine oil, hydraulic fluid, brake fluid,
etc. Do not mix drained brake fluids or fuels with lubricants. Store all drained fluids safely until you can dispose of
the fluids in a proper way that complies with all local legislation and available resources.
• Do not allow coolant mixtures to get into the soil. Collect and dispose of coolant mixtures properly.
• The air-conditioning system contains gases that should not be released into the atmosphere. Consult an air-condi-
tioning specialist or use a special extractor to recharge the system properly.
• Repair any leaks or defects in the engine cooling system or hydraulic system immediately.
• Do not increase the pressure in a pressurized circuit as this may lead to a component failure.
• Protect hoses during welding. Penetrating weld splatter may burn a hole or weaken hoses, allowing the loss of oils,
coolant, etc.
Battery recycling
Batteries and electric accumulators contain several substances that can have a harmful
effect on the environment if the batteries are not properly recycled after use. Improper
disposal of batteries can contaminate the soil, groundwater, and waterways. CASE
CONSTRUCTION strongly recommends that you return all used batteries to a CASE
CONSTRUCTION dealer, who will dispose of the used batteries or recycle the used
batteries properly. In some countries, this is a legal requirement.
Mandatory battery recycling
NOTE: The following requirements are mandatory in Brazil.
Batteries are made of lead plates and a sulfuric acid solution. Because batteries contain heavy metals such as lead,
CONAMA Resolution 401/2008 requires you to return all used batteries to the battery dealer when you replace any
batteries. Do not dispose of batteries in your household garbage.
Points of sale are obliged to:
• Accept the return of your used batteries
• Store the returned batteries in a suitable location
• Send the returned batteries to the battery manufacturer for recycling
47860801 25/03/2015
7
15. Engine - Engine and crankcase
Engine - Remove - 580N only
580N Four-Wheel Drive (4WD) TIER 3
580N Two-Wheel Drive (2WD) TIER 3 ---
Put identification tags on all disconnected hoses and
wires. Close disconnected hoses and fittings with caps
and plugs.
NOTE: The photos in this procedure may be different from
your machine and are for reference only.
1. Park the machine on a level surface. Raise the loader
and lock the support strut to hold the loader.
RCPH10TLB022AAL 1
2. Remove the battery cover from the right step. If the
machine has only one battery, disconnect the negative
battery cable from the battery.
3. If the machine has two batteries, remove the terminal
nut (1). Remove the negative battery cable (2) from
the terminal and move the negative battery cable away
from the battery. Make sure the jumper cable (3) is
installed on the terminal and start the terminal nut (2)
onto the terminal.
RCPH10TLB030AAL 2
4. If equipped with air conditioning, discharge the air con-
ditioning system.
5. Remove the radiator wrapper, fan shroud, radiator, oil
coolers and, if equipped with air conditioning, the con-
denser assembly. See Radiator - Remove - 580N only
(10.400) for procedures.
47860801 25/03/2015
10.1 [10.001] / 10
16. Engine - Engine and crankcase
6. If equipped with air conditioning, disconnect the electri-
cal connector (1). Remove the tie strap (2). Disconnect
the hoses from the compressor.
RCPH10TLB042AAL 3
7. Remove the tie strap. Disconnect the electrical con-
nectors for the air restriction indicator.
RCPH10TLB025AAL 4
8. Loosen the clamp on the air cleaner hose at the tur-
bocharger. Disconnect the air cleaner hose from the
turbocharger.
RCPH10TLB024AAL 5
9. Disconnect crankcase ventilation hose and the aspira-
tion hose.
RCPH10TLB031AAL 6
47860801 25/03/2015
10.1 [10.001] / 11
17. Engine - Engine and crankcase
10. Remove the cap screws and flat washers that fasten
the fixed hood to the uprights. Remove the fixed hood
and air cleaner as an assembly.
RCPH10TLB023AAL 7
11. Remove muffler and brackets from engine.
12. If equipped, disconnect grid heater positive cable and
sensor wires.
RCPH10TLB036AAL 8
13. Disconnect the electrical connector for the fuel injec-
tion pump (1) and oil pressure sender (2).
RCPH10TLB040AAL 9
14. Disconnect the throttle cable from the mounting
bracket.
RCPH10TLB034AAL 10
47860801 25/03/2015
10.1 [10.001] / 12
18. Engine - Engine and crankcase
15. Disconnect the throttle rod (1). If equipped, discon-
nect the heater hose (2).
RCPH10TLB035AAL 11
16. Disconnect the fuel return line (1) and the fuel input
line (2).
RCPH10TLB041AAL 12
17. Disconnect the coolant temperature sender (1) and
coolant temperature switch (2).
RCPH10TLB039AAL 13
18. Disconnect the wires from the alternator.
RCPH10TLB037AAL 14
47860801 25/03/2015
10.1 [10.001] / 13
19. Engine - Engine and crankcase
19. Disconnect the heater hose, if equipped.
RCPH10TLB043AAL 15
20. Disconnect the ground strap (1). Disconnect the wires
(2) from the starter.
RCPH10TLB038AAL 16
21. Remove the starter from the engine. Remove the ac-
cess cover from the bell housing.
RCPH10TLB026AAL 17
47860801 25/03/2015
10.1 [10.001] / 14
20. Engine - Engine and crankcase
22. Install the engine turning tool, 380000988, to turn the
flywheel for access to the cap screws.
RCPH10TLB005BAL 18
23. Remove four cap screws that fasten the flywheel to
the flex plate.
RCPH10TLB027AAL 19
24. Connect lifting equipment to the lifting eyes on the
engine to hold the engine in place.
25. Remove the bolts, flat washers, and nuts from the
front engine mount.
RCPH10TLB028AAL 20
26. Loosen and remove the 12 cap screws and flat wash-
ers that fasten the transmission to the engine. Move
the heater hose and clamps out of the way.
47860801 25/03/2015
10.1 [10.001] / 15
21. Engine - Engine and crankcase
27. Move the engine forward and raise the engine. Re-
move the engine from the machine.
NOTICE: Make sure that the flex plate/converter assembly
stays in place on the transmission. If the engine will be
separated from the transmission for an extended period of
time fasten the flex plate/converter assembly in place on
the transmission.
Next operation:
Engine - Install - 580SN, 580SN-WT, 590SN only (10.001).
47860801 25/03/2015
10.1 [10.001] / 16
22. Engine - Engine and crankcase
Engine - Install - 580N only
580N Four-Wheel Drive (4WD) TIER 3
580N Two-Wheel Drive (2WD) TIER 3 ---
Prior operation:
Engine - Remove - 580N only (10.001).
If applicable, remove caps and plugs from previously
disconnected hoses and fittings. Remove identification
tags after making the hose and wire connections.
NOTE: The photos in this procedure may be different from
your machine and are for reference only.
1. Position the engine in the machine.
NOTICE: Make sure that the flex plate/converter assembly
stays in place on the transmission.
2. Move the heater hose and clamps out of the way. In-
stall and tighten the 12 flat washers and cap screws
securing the transmission to the engine.
Tighten cap screws to a torque of 52 - 57 N·m (38 -
42 lb ft).
3. Install and tighten the front engine mounting bolts, flat
washers, and nuts.
Tighten the self locking nuts to a torque of 90 - 100 N·m
(66 - 74 lb ft).
RCPH10TLB028AAL 1
4. Disconnect the lifting equipment from the lifting eyes on
the engine.
5. Tighten the four cap screws that fasten the flywheel to
the flex plate.
Tighten cap screws to a torque of 52 - 57 N·m (38 -
42 lb ft).
RCPH10TLB027AAL 2
47860801 25/03/2015
10.1 [10.001] / 17
23. Engine - Engine and crankcase
6. Remove the engine turning tool, 380000988.
RCPH10TLB005BAL 3
7. Install the access cover to the bell housing. Install the
starter onto the engine.
RCPH10TLB026AAL 4
8. Connect the wires (2) from the starter. Attach the
ground strap (1).
RCPH10TLB038AAL 5
47860801 25/03/2015
10.1 [10.001] / 18
24. Engine - Engine and crankcase
9. If equipped, connect the heater hose.
RCPH10TLB043AAL 6
10. Connect the wires from the alternator.
RCPH10TLB037AAL 7
11. Connect the coolant temperature sender (1) and
coolant temperature switch (2).
RCPH10TLB039AAL 8
12. Connect the fuel return line (1) and the fuel input line
(2).
RCPH10TLB041AAL 9
47860801 25/03/2015
10.1 [10.001] / 19
25. Engine - Engine and crankcase
13. Connect the throttle rod (1). If equipped, connect the
heater hose (2).
RCPH10TLB035AAL 10
14. Connect the throttle cable from the mounting bracket.
RCPH10TLB034AAL 11
15. Connect the electrical connector for the fuel injection
pump (1) and oil pressure sender (2).
RCPH10TLB040AAL 12
16. If equipped, connect the grid heater positive cable and
sensor wires.
RCPH10TLB036AAL 13
17. Attach the muffler and brackets to the engine.
47860801 25/03/2015
10.1 [10.001] / 20
26. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
27. Engine - Engine and crankcase
18. Install the fixed hood and air cleaner. Secure the fixed
hood to the uprights with flat washers and cap screws.
RCPH10TLB023AAL 14
19. Attach the aspiration hose and the crank case venti-
lation hose.
RCPH10TLB031AAL 15
20. Connect the air cleaner hose from the turbocharger.
Tighten the clamp on the air cleaner hose at the tur-
bocharger.
RCPH10TLB024AAL 16
21. Connect the electrical connectors for the air restriction
indicator. Secure with a tie strap.
RCPH10TLB025AAL 17
47860801 25/03/2015
10.1 [10.001] / 21
28. Engine - Engine and crankcase
22. If the machine is equipped with air conditioning, con-
nect the electrical connector (1). Connect the hoses
from the compressor. Secure with a tie strap (2).
RCPH10TLB042AAL 18
23. Install the radiator wrapper, fan shroud, radiator, oil
coolers and, if equipped with air conditioning, con-
denser assembly. See Radiator - Install - 580N only
(10.400) for removal procedures.
24. If equipped with air conditioning, see Air condition-
ing - Charging - Air conditioner system evacuation
and recharging (50.200) to recharge air conditioning
system.
25. If the machine has two batteries, remove the terminal
nut (1) from the jumper cable (3). Attach the negative
battery cable (2) to the terminal and install the terminal
nut (1).
If the machine has only one battery, connect the neg-
ative battery cable to the battery.
RCPH10TLB030AAL 19
26. Install the battery cover on the right-hand step.
27. Release the support strut lock and lower the loader
bucket.
RCPH10TLB022AAL 20
28. Fill the engine and cooling system. See Capacities ()
for specifications.
47860801 25/03/2015
10.1 [10.001] / 22