The document describes two powered mixers and five power amplifiers from Carvin. The XP800L is a 6-channel 500-watt stereo mixer weighing 4.5 kg, while the XP1000L is an 8-channel 1200-watt stereo mixer weighing 7 kg. The power amplifiers range from 1000 to 3800 watts and weigh only 6.8 kg or less, making them much lighter than conventional amplifiers of similar power ratings. The mixers and amplifiers are designed for portable and installed sound applications.

1. c
2010 PRO AUDIO
www.carvinworld.com 43

2. XP800L Stereo 500w 6 Channel Mixer - lightweight only 4.5 kgs XP1000L 3 Power Amps -1200w 8 Channel Mixer - lightweight only 7 kgs
Ideal for:
Ideal for:
Small bands Working Bands
Acoustic & Vocals House PA
DJ’s Theater Groups
Public Address Larger DJ systems
Churches Public Address
Installed Music Churches
with Announcements
USB power
USB power -charge your
-charge your iPod™ while
iPod™ while it plays
it plays
XP800L Mixer GO WIRELESS NOW! shown with optional wireless systems
XP1000L Mixer
OR ADD LATER
6 Ch 500w Stereo, Ultra light 4.5kgs powered mixer 8 Ch 1200w Stereo, Ultra light 15 lb powered mixer
• Superb sound from 8 XLR low noise • Three 9 band EQ’s - stereo for R/L, Hz for maximum efficiency deliver-
• Superb sound from 6 XLR low noise • DSP effect processors with over
mic pre amps, plus one stereo channel plus Monitor ing great sub bass performance while
mic pre amps, plus 2 stereo RCA 256 effects and a control sending the
wth ¼”-inch R/L & RCA inputs -12 total • 2 DSP effect processors allow 2 eliminates the weight
input channel - 8 total inputs effects back to the monitors Dual Diversity UHF 16 Ch USM16-MC & • 3 power amps – R/L & Monitor deliver- effects at one time with over 256 • No wasted energy from the AC wall
• 2 power amps – R/L stereo or • +48V Phantom condenser mic power USM16-BP mic or belt-pack (1 or 2) ing 1200w RMS, 1600 watts peak power effects each with controls sending plug, plus it runs cool because it
switchable to Mono Main and supply switch USM16-MC USM16-BP for large venues. Each amp delivers 400w the effects back to the floor monitors operates at 94% efficiency
Monitor delivering 500w RMS, 750w • Main R/L, Monitor, and External ANTENNA KIT (plate & connectors) RMS at 4 Ω, 300w RMS at 8 Ω. • +48V Phantom condenser mic power • The convenient auto-switching AC
peak for medium size venues. Effects Send jacks SEE PG 62 FOR WIRELESS ACCESSORIES
• Speakon™ combo ¼-inch connectors. • Music Break switch allows background input for 120V 60 Hz or 240V 50 Hz
Each amp delivers 250wRMS at • Class D power amps deliver high • Auto-switching AC input works for
• 5V USB power port for I-Pods, MP3 music while the channels are muted. • Size:43cmW x 24cmD x 25cmH
4 Ω, 140wRMS at 8 Ω. dynamic power from the 120V 60 Hz or 240V 50 Hz
players or USB LED lights • Main R/L, Monitor, and External 7kgs.
• 5V USB power port for I-Pods, MP3 Switchmode power supply that • Size: 34cmWx 23cmD x19cmH,
• Variable GAIN controls adjust the in Effects Send jacks • Top slot for two optional USM16-MC
players or USB LED lights operates at 100,000 Hz for maximum 4.5 kgs.
put levels to eliminate noise and input • Class D power amps deliver high or USM16-BP mic or belt-pack wire
• Input GAIN switches adjust the input efficiency delivering great sub bass • top slot for two optional USM16-MC
over-driving dynamic power from the Switchmode less systems – eliminates the clutter
levels for mic and line levels. performance while eliminates the weight or USM16-BP mic or belt-pack wire
• Active LOW, MID and HI channel EQ power supply that operates at 100,000 • Made in the USA.
• Active LOW, MID and HI channel EQ • No wasted energy from the AC wall less systems – eliminates the clutter
• Two 9 band EQ’s (stereo) - R/L or plug, plus it runs cool because it • Made in the USA
Main & Monitor operates at 94% efficiency • www.carvinworld.com/XP800L
GO WIRELESS NOW!
OR ADD LATER
Optional Dual Diversity UHF 16 Channel USM16-MC
and USM16-BP mic or belt-pack wireless systems (1 or 2)
USM16-MC USM16-BP
ANTENNA KIT (mounting plate & connectors)
SEE PG 62 FOR WIRELESS ACCESSORIES
R/L, Monitor Speakon Connectors
44 www.carvinworld.com www.carvinworld.com 45

3. RX1200L 4 Power Amps -1600w 12 CH Rackmount Mixer S16 STUDIO SERIES USB MIXER
Built-in
Power Amps
for
Studio
RW5 ROAD WARRIOR™ CASE Monitors
GO WIRELESS NOW!
OR ADD LATER
Dual Diversity UHF 16 Ch USM16-MC &
USM16-BP mic or belt-pack (1 or 2)
To rackmount
RX1200L USM16-MC USM16-BP
remove end-caps ANTENNA KIT (plate & connectors)
SEE PG 62 FOR WIRELESS ACCESSORIES
12 Ch 1600w Stereo Rack Mount, Ultra-light 18 lb powered mixer
• Superb sound from 12 XLR low noise levels to eliminate noise & over driving ing great sub bass performance while
mic pre amps, plus one stereo channel • Active LOW, MID and HI channel EQ eliminates the weight
wth ¼”-inch R/L & RCA inputs • Four 9 band Graphic EQ’s - R/L, plus • No wasted energy from the AC wall
• 4 power amps – R/L & Monitors 1&2 Monitor 1 and 2 plug, plus it runs cool because it
delivering 1600w RMS, 2400w peak power • 2 DSP effect processors allow 2 ef- operates at 94% efficiency The S16 new ultra-low noise studio preamps provide noiseless and distortion-
for large venues. Each amp delivers 400w fects at one time with over 256 effects • The convenient auto-switching AC
RMS at 4 Ω, 300w RMS at 8 Ω. each with controls sending the effects input for either 120V 60 Hz or 240V 50 Hz S16 free xrecordings. The exclusive 44w stereo power amp section will give ample
power to your passive studio monitors • 8 phantom powered XLR Mic pre-amps
• Rack mountable - remove end-caps back to the floor monitors • Size: 48cmWx 26cmDx24cmH, R162 Rackmount Kit • 4 stereo (8 mono) channels with gain switches • channel inserts • 3 band
to install into a 5U or larger rack case • +48V Phantom condenser mic power 18 kg s. channel EQ • dual effects sends • stereo pan • headphone jack • LED VU meters
STUDIO MATE S16 SPECS • two balanced XLR outputs and two 1/4” outputs • effects send and return jacks
• Speakon™ combo ¼-inch connectors. • Music Break switch allows back-round • Top slot for two optional USM16-MC Freq. response: 20 - 20 kHz ±1 dB
• 5V USB power port for I-Pods, MP3 music while the channels are muted. or USM16-BP mic or belt-pack • RCA tape in and out, stereo USB in and out for computer recording. Built-in
THD distortion: less than .002%
Equivalent input noise: -128dBm power amp 22w per ch @ 8 Ωs.
players or USB LED lights • Class D power amps deliver high wireless systems – eliminates the clutter S/N Ratio 100 dB
• Professional Insert jacks at the push dynamic power from the Switchmode • Made in the USA. For more information Dynamic Range: 114 dB
Mic Gain: 45 dB
of a button on the first six channels power supply that operates at 100,000 go to carvinworld.com/RX1200L Line Gain: 30 dB
• Variable GAIN controls adjust the input Hz for maximum efficiency deliver- Total Gain: 65 dB (balanced)
Max Output: +20 dBm
EQ Section HI ±15 dB @ 12k Hz
MID ±10 dB @ 2.2k Hz
LOW ±15 dB @ 85 Hz
Stereo Power Amp: 44w RMS
Size/Wt: 40cmW x 30cmD x 8cmH Wt: 3.6 kgs
Exclusive 44w
Stereo Power Amp Stereo USB
S/PDIF outputs
PM5 125W REFERENCE SPOT MONITOR
PM5-B Available March 1
PM5-B PM5-W
Black–stand mount & 1/4” White (no stand mount
jacks & jacks)
The PM5-B is simply the best spot/reference monitor made! • As
a true 2-Way system, you get the full audio spectrum from 86 to
19.5kHz • This multi-purpose monitor yeilds excellent high frequency
and exceptional bass from a heavy-duty 5 1/ ” woofer • 125W capacity
4
• High output level is “big” sounding, not what you’d expect from a
small enclosure.
• High impact molded enclosure incorporates mounting slots for
hanging • The Black PM5-B features a 20-degree angle insert bracket
to accept a mic stand for spot monitoring & dual 1/4” speaker jacks (so
you can daisy-chain PM5-B’s together) along with wire terminals. The
PM5-W (white) features wire terminals.
Water Resistant
PM5 TECHNICAL SPECIFICATIONS For outdoor use
RX1200R
Frequency Response: 75 Hz to 19.5 kHz
Drop
Power Handling: 125w RMS Ceiling
Rackmount-no power Recommended Amp: 50 to 150 watts
amps Nominal Impedance: 8Ω
Inputs/Outputs: Two 1/4”(PM5B) , two
spring terminals
OMNI™ Tweeter Terminals accept
Woofer Enclosure Type: Vented Box swivel adjustment wire and banana PM5-UB black “U” Bracket PM5-CB Bracket Wallmount/
Construction: Molded Enclosure for directional connectors. PM5-B PM5-UW white “U” Bracket Ceiling with saftey cable
accuracy features 1/4” speaker
Dim/Wt: 27cmH x 17cmD” x 17cmW • jacks
1.8kgs
46 www.carvinworld.com www.carvinworld.com 47

4. POWER AMPS - ULTRA-LIGHT 1000w-3800w ALL MODELS 6.8kgs and under
1/4 to 1/3 the weight of conventional amps
“Carvin DCM power amps are
very smooth sounding, very
powerful and they don’t quit!”
- Don Weiss, Dondi Sound
Clients include Miramar Air Show,
studio engineer for The Beach Boys,
Rush, Robert Palmer...
DCM1000L, DCM2000L, DCM1540L, DCM3000L, DCM3800L ULTRA-LIGHT SERIES
If you want an amp that delivers exceptional sound/reliability, ultra-light weight
DCM1000L DCM2000L DCM1540L DCM3000L DCM3800L
6.8kg from 1000w to 3800w and it’s made in the USA, the DCM is the answer.
8Ωs/CH 200w 350w 425w 550w 700w
You should seriously consider the ultra-light feature, which comes in part from its
“Power, Reliabilty and Volume - heavy-duty aluminum frame. Aluminum is more expensive, but worth every penny 4Ωs/CH 325w 550w 750w 950w 1150w
that’s what this rack of DCM’s 2Ωs/CH 500w 1000w – 1500w* 1800w*
is about.” to keep your rack as light as possible. Expect 2/3 to 3/4 savings over conventional
Rich Bartle – B.I.G. Productions amplifiers – 22.6kgs to 27kgs amps become 6.8kgs. 8Ωs bridged 700w 1100w 1500w 1900w 2300w
Clients include: Ricky Martin, Christina
Aguilera, Sony Pictures, Woodstock
High power, uncompromised sound and maximum reliability is at its best for both 4Ωs bridged 1000w 2000w – 3000w* 3800w*
‘99, ESPN, Polygram Records, Capitol touring systems and fixed installations. The concert stage is the ultimate test of OUTPUT MODE CLASS D CLASS D CLASS A/B CLASS A/B CLASS A/B
Records, Virgin Records, Warner Bros
Records and more... professional audio and for the last decade the DCM has made its mark serving top Rack Space 2U 2U 2U 2U 2U
artists and concert venues night after night, year after year. The DCM is a proven Net Weight 4.5kgs 4.5kgs 6.3kgs 6.8kgs 6.8kgs
American made workhorse backed by over 60 years of manufacturing excellence.
The new DCM1000L and DCM2000L feature ENGINEERED TO A HIGHER STANDARD 5 DCM3800L 19,000 watts - 75lbs!
Class D output raising power amp efficiency The DCM Series features a heavy-duty
All ratings EIA 1% THD at 1 kHz except * tested at 1 k Hz no clipping 33ms on 66ms off
even higher! The DCM1540L, DCM3000L and galvanized steel chassis. All printed
THRU INPUT INPUT THRU
DCM3800L feature linear Class A/B output stages. circuit cards are double-sided FR4 CUSTOMER COMMENT
military-grade fire retardant with plated 8 OHM 325W/CH - 1200W BRIDGE
4 OHM 600W/CH - 2000W BRIDGE
Got my 1540L today and have used it with a BMaxT into my Carvin LS1503 3way. First im-
BRIDGE LIMITER GND PARALLEL
- Highest value ultra-light amps in the industry through holes - soldered under, on top
2 OHM (MIN) 1000W/CH
LIFT
- Heavy-duty aluminum frames pressions are, WOW, this sucker gets loud. I tried bridging the amp at first, but it was way
BRIDGE
INPUT
OUTPUT SPEAKONS™ ACCEPT 1/4 INCH JACKS
and through each component. SMT 1 2
too much for the 1503. I had the 1540 at 9 o’clock. I then switched to single channel, which
120-240VAC 50/60Hz 1000VA BRIDGE
ONLY
- Most models designed for continuous 2 Ωs loads construction offers “shock-proof” pro-
“I like clear defined tone at - Power supply designed for superior bass
1 2
was giving me 475 watts at 8 Ωs. Was able to turn up the BMaxT a bit more, gain at about 12
high volume and you need a tection. Every DCM is engineered to a
- “Green” design to save engery higher standard for unsurpassed sound
o’clock and master at about 10 o’clock, 1540 still around 9 -10 o’clock. I was only able to light
lot of headroom to do that...A up the amp on “ green “ which, according to the manual, is not driving the amp hard enough! I
DCM1000 powers my rig.” - Quiet hum-free operation with noise less than quality and durability making it one of cross-flow DCM1540L, DCM2000L, DCM3000L, DCM3800L
Frank Gambale -106dB for studio applications our most successful products. heat sinks turned up the preamp as much as I could , much louder than I ever will play, and still couldn’t
- Class D: Low THD: < 0.08% at 8 Ω get the 1540 to Christmas tree at all. Probably way too much power for my needs, unless I go
- Class A/B: Ultra-low THD: < 0.03% at 8 Ω to a stack, or larger cab. Might be the ticket for you Acme users out there.
- Handles difficult mismatched or reactive loads
- Soft-start power-up prevents tripping AC breakers
- Speaker Guard™ protects from harmful DC
- Multi speed fans - rear to front flow for cooler racks
- Distortion-free limiters to help protect drivers 120/240V operation Shock-proof SMT construction
DCM Special purpose amps
- Independent thermal overload protection The NEW DCM200L has evolved from the ever popular DCM200L DCM2004L
- Recessed front to prevent control damage DCM150 encorporating a new switching power supply de- 8Ωs/CH 100w 350w x 4
- Percentage of power, clip, bridge, protect livering more power for the studio with less heat and no fan.
and power LED indicators With a push of the rear impedance button, you get 100w at 4Ωs/CH 100w 500w x 4
“DCM’s power our 500 seat - Balanced XLR and ¼-inch TRS inputs 2Ωs/CH
main stage and club on Hol- 8 Ω or 4 Ω. – –
- Speakon™, Binding Post, ¼-inch TS outputs
lywood Blvd. It’s the most - Convenient Ground Lift & Parallel Input switches DCM200 8Ωs bridged 200w –
versatile system I’ve used.” The DCM2004L is offered for applications that require 4
- Shock-proof SMT construction 4Ωs bridged – –
STEREO AMPLIFIER
Fedge - Head Engineer - Auto switches to either 120 or 240 VAC 50 to 60 Hz
high-powered amps in one package. Great for installations.
MUSICIAN’S INSTITUTE OUTPUT CLASS CLASS A/B CLASS D
- Fit all racks - only 266mm deep
“I have eight of these and use - 3-year warranty - Made in the USA BRIDGE INPUT 1 INPUT 2
Rack Space 1U 2U
High current components - FR4 fire retardant circuit card
STEREO AMPLIFIER 4Ω MIN. 8Ω MIN. 4Ω MIN.
GND LIFT PARALLEL
them to power Carvin subs. I
8Ω/CH 100W 75W
Net Weight 1.8 kgs 4.5kgs
4Ω/CH X 100W
SERIAL NUMBER 120-240VAC~50/60Hz 16Ω BR 200W 150W MIN. LOAD BRIDGE
SERIOUS POWER - The DCM’s headroom
225VA 8Ω BR X 200W SELECT
have run them at full power all A rear “Ground Lift” switch eliminates ground loops.
ST.
8Ω
BR.
16Ω
DCM200L Rear Panel
reveals its high dynamic power from the Switch-
4Ω 8Ω
day on many different occa- A “Parallel Input” switch eliminates the “Y” adapter
8Ω/CH 100W 75W
mode power supply that operates at 130,000
4Ω/CH X 100W
16Ω BR 200W 150W
sions and they handle it with
8Ω BR X 200W
Hz. Extreme currents are delivered to the most typically used for paralleling channels. The mono
absolutely no problem.”
Thomas Carroll, Atlanta demanding subwoofer system, which are driven
under 4 Ω bridge - 2 Ω operation. Every DCM
“Bridge” switch delivers the full power of the amp
(both channels) into one output. The limiters are
DCM2004L Rear Panel
DCM200L
“Our band uses both Carvin easily handles the most difficult mismatched or available at the push of a button to help control peaks
and Berhinger gear. Our reactive loads and is AC generator friendly. protecting your drivers. Connecting is done with
DCM1000 is as loud as the balanced XLR and ¼- inch TRS inputs. Three types
Euro2500. Our DCM1500 COOL EFFICIENT DESIGN - A high ef- of outputs feature Speakon™, binding post, and
blows it out of the water.” ficiency heat transfer system offers the most ¼-inch phone connectors for every possible hookup.
Jayce Bass, Kansas advanced cooling, which is one of the keys to The soft-start circuit gently turns the DCM on to
reliable power. Five high ratio 6063-T5 flow- prevent AC breakers from tripping. DCM2004L
“I purchased 2 DCM2500s... through aluminum heat sinks remove heat fast
the sound they produce is with multi-speed fans that runs quiet under 2 Ωs DCM SPECIFICATIONS
outstanding beating out the loads. Air is pulled from the rear and exhausted to CLASS D, Freq. Resp.: +0 /- 3 dB 20 Hz - 20 kHz, THD: <
top brands of Crest Audio the front to keep the rear of your rack cool. R & 0.1% @ 50% output, < 0.2% 20-20 kHz @ 90% output
and Crown Audio. Along with D designed a “direct mount” system for the power CLASS A/B, Frequency Response: +/- 0.5 dB 20 Hz - 20 kHz,
the two DCM2500‘s I also output devices to be directly mounted to the heat +/- 1.5 dB 10Hz - 40 kHz, THD: 0.03% @ 50% output, .1%
sink, which eliminates any thermal barrier to keep 20-20 kHz @ 90% output
run a DCM2000 on mids and
Sensitivity: (4 Ωs, vms) 1.0 V, Signal to Noise Ratio:
a DCM1000 for horns and your amp running cool.
Greater than 106 dB, Input Impedance: >20K Ω balanced,
tweeters. At a battle of the DJs Power Supply: Switchmode, Speaker Guard™ protection cir-
I was heard two miles away ACCESSORY GROUP - The accessory group cuit immediately disconnects your speakers, Over-Current:
with total clarity. Thanks Carvin features recessed front controls with status protected, Under-Voltage: protected, Thermal: protected,
for making great products.” indicators that won’t get bumped or easily moved. AC Input: 90-250VAC 50-60Hz
Waymon Mercer, Fl
48 www.carvinworld.com www.carvinworld.com 49

5. DIGITAL EQ AND LOUDSPEAKER MANAGEMENT
XD88
Eight 30-band Graphic Equalizers are standard on
the XD88. Now every input can have a 30 band
equalizer assigned for total sonic control. Each
band has a full 12dB of cut/boost enabling the user
to handle even most difficult feedback situations
The XD88 offers unlimited possibilities with its
class leading I/O design. Eight fully balanced
XLR inputs and outputs coupled with insert jacks
on each channel makes the Carvin XD88 a NO
LIMITS loudspeaker management system.
INPUTS:
SPECIFICATIONS:
Connector Female XLR & ¼” TRS 10kOhm electronically balanced
Maximum Input +18 dBu
Digital Controls:
XD88 Serial Control
LOAD SAVE CO N N E C T TO D E V I C E U P LOA D F I R M WA R E
Gain 0dB to -32dB in 0.2dB steps
INPUT A B C D E F G H COPY PASTE FLAT
GAIN 25 31.5 40 50 63 80 100 125 160 200 250 315 400 500 630 800 1 K 1 . 2 5 K1 . 6 K 2 K 2 . 5 K 3 . 1 5 K 4 K 5K 6.3K 8K 10K 12.5K 16K 20K
0dB +12 +12
EQ 30 Band Graphic 25Hz to 20kHz, +/- 12dB in 0.1dB steps -8
-16
+6
0dB
+6
0dB
-24 -6 -6
-32 -12 -12
0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0 0.0
OUTPUTS:
ROUTER INPUTS
20
1 A B C D E F G H 16
12
8
Connector Male XLR 150 Ohms electronically balanced
2 A B C D E F G H
4
3 A B C D E F G H 0
-4
OUTPUTS
4 A B C D E F G H -8
Maximum Output +18 dBu
- 12
5 A B C D E F G H
c - 16
- 20
6 A B C D E F G H
OUTPUT MUTES 20 50 100 200 500 1K 2K 5K 10K 20K
7 A B C D E F G H
Dynamic Range 120dB un weighted 22Hz – 22kHz Limit the XD88 output The XD88 features a Control every aspect
Parametric EQ is critical
8 A B C D E F G H 1 2 3 4 5 6 7 8 OUTPUT 1 2 3 4 5 6 7 8
OUTPUT 1 2 3 4 5 6 7 8 +18.0 dB 0. 02 sec DELAY 0.000 msec
Frequency Response 20Hz – 20kHz
COPY PASTE FLAT
and protect your speak-
PEQ1 PEQ2 PEQ3 PEQ4 LO CUT HI CUT
powerful routing tool of the XD88 using
GAIN
to achieve the best sonic
0dB GAIN FREQ BW GAIN FREQ BW GAIN FREQ BW GAIN FREQ BW
+12 20K 3.00 +12 20K 3.00 +12 20K 3.00 +12 20K 3.00 20K 6 20K 6
OFF
Distortion (THD) <0.005%, 20Hz – 20kHz @+10dBu
-8 OFF
+6 4K 2.24 +6 4K 2.24 +6 4K 2.24 +6 4K 2.24 4K 4K
12 12
BUT BUT
-16 800 800 800 800 800 800
ers. Each of the eight
0dB 0dB 0dB 0dB
that allows the user to the Xdrive software
1.52 1.52 1.52 1.52
output. The XD88 gives 4
18 18
BES BES
-24 -6 125 -6 125 -6 125 -6 125 125 125
0.76 0.76 0.76 0.76
Digital Controls
24 24
L-R L-R
-32 -12 20 0.04 -12 20 0.04 -12 20 0.04 -12 20 0.04 20 20
48 48
0.0 0.0 800 0.04 0.0 800 0.04 0.0 800 0.04 0.0 800 0.04 20.0 20.5K
Gain 0dB to -32dB in 0.2dB steps bands of EQ per channel. outputs have an adjust- send any input to any interface. The easy to
Phase 0 or -180 degrees able limiter module output. The Xdrive use layout has all the
Parametric EQ 20Hz to 20.5kHz, +/- 12dB in 0.1dB steps, 0.04 to 3.0 octaves(Q) in 0.04 steps.
Limiter +18dB to -14dB(at Output) hard limiting Release time 0.02 to 5.0 seconds
built in with a maxi- router module has a controls and program
Crossover Filters 6, 12, 18, 24, 48dB/oct, Butterworth, Bessel and Linkwitz-Riley mum threshold level of software interface mak- settings on one screen System also includes:
Delay 0-456.939mS in 21uS steps (0-507ft 8.52in. in 0.28in steps or 0-152.313 meters in 7mm steps) +18dB at full output ing it easier to route so there is no need
GENERAL: and down to -14dB at audio to wherever it is to toggle between
Dimensions 48cmW x 9cmH x 20cmD full limit. needed. windows. Every XD88
Weight 3.31 kgs comes standard with
Power 90-250 VAC, 50/60Hz standard IEC receptacle
the Xdrive software
SYSTEM PROCESSING: package.
Multi DSP 48kHz 24 bit Real Time Delay Module
A2D Converters 114dB 24 bit Analyzer
D2A Converters 120dB 24 bit
50 www.carvinworld.com www.carvinworld.com 51

6. XC3000
2/3 WAY STEREO
CROSSOVER
• Precision 2-way or 3-way stereo electronic crossover State-of-the-art Linkwitz Riley 24 dB/octave filters
• Stereo bi-amped or tri-amp set ups • High slew rate for a transparent, uncolored sound
• Sub woofer output sums channels 1 & 2 • Phase correcting switches
• Balanced XLR & TRS 1/4” inputs and outputs
EQ2015 • EQ2015: 2/3 Octave Center Freq: 25,40,63, 100, 160, 250, 400, 630, 1k,1.6k, 2.5k, 4k, 6.3k, • Super quiet 104dB dynamic range with high headroom
DUAL 2/3 OCTAVE 10k, and 16 kHz ± 5% • Balanced XLR and TRS 1/4” connectaors
EQUALIZER • Level controls plus sweepable high & low cut filters
• In/Out bypass to compare the original source
• Large precision sliders
• Built-in Power Supply – no “wall-wart”
EQ2030 • EQ2030: 1/3 Octave Center Freq: 25,31.5, 40, 50, 63, 80, 100, 125, 160, 200, 250, 315, 400, • Super quiet 104dB dynamic range with high headroom
DUAL 1/3 OCTAVE 500, 630, 800, 1k,1.25k, 1.6k, 2k, 2.5k,3.15k, 4k, 5k, 6.3k, 8k, 10k, 12.5k, 16 k and 20k • Balanced XLR and TRS 1/4” connectaors
EQUALIZER • Level controls plus sweepable high & low cut filters
• In/Out bypass to compare the original source
• Large precision sliders
• Built-in Power Supply – no “wall-wart”
52 www.carvinworld.com www.carvinworld.com 53

7. CONCERT SERIES MIXERS NEW! Larger Consoles with 8 CH Sends, 4 Band Dual Sweep EQ, and bus Compressors
4 BAND DUAL MID SWEEP EQ
8 SENDS - 6 MONITORS 2 EFFECTS
4 SUB GROUP COMPRESSORS
C2448 C3248 Rear
8 CH Sends, 4-band EQ C3248
8 CH Sends, 4-band EQ
Never before has there been so much performance CHANNEL FEATURES MASTER FEATURES
packed into a rugged, compact American made 4 bus • 4 BUS GROUP ASSIGN • 4 SUB GROUP faders
L/R ASSIGN *4 SUB GROUP COMPRESSORS
OPTIONS FOR C2448 & C3248
console. All models feature R/L USB recording out- Dual Diversity UHF 16 Ch USM16-MC &
*8 SENDS-6 MONITOR with LINK Switches
puts along with ultra low-noise, high slew rate IC’s 2 EFFECTS • L/R Assign switches USM16-BP mic or belt-pack (1 to 4)
for exceptional sound. Sealed controls and switches *4 Band EQ with LOW- • L/R MAIN faders USM16-MC USM16-BP
guard against the elements while the “SMT” Surface • MID and HI-MID sweeps • MONO output control ANTENNA KIT (1 to 2) (plate & connectors)
Mount Technology construction ensures the integrity • Balanced XLR Mic *6 MONITOR sends SEE PG 62 FOR WIRELESS ACCESSORIES
of each component. The convenient auto-switching inputs • 2 EFFECT sends
AC input is for either 120V 60 Hz or 240V 50 Hz. • Balanced LINE inputs • 2 Stereo RETURNS
INSERTS/DIRECT OUTS • Record out stereo RCA
For information see carvin.com/C1644U or /C3248
• +48v PHANTOM power • 2 built-in 24-BIT EFFECTS
Exclusive big board features are now standard in • CH Gain: 55 dB reverbs, chorus, echos, Stereo L/R USB output
flanging - 256 effects each except C1644P
the new 4 bus 24 ch C2448 and 32 ch C3248 con- • R/L STEREO PAN
• 2 master effects LEVELS
soles with 8 SENDS per channel and XLR outputs • SIGNAL LED
• 4 EFFECT PARAMETERS
– 6 Monitor and 2 Effects, and 4 BAND EQ with LO • PEAK LED
• 2 EFFECT PEAK indicators
• MUTE SWITCH
and HI shelving, LO MID and HI MID sweeps, plus • 2 EFFECT MUTE switches
• PFL SWITCH Carvin is the official Pro Sound
4 COMPRESSORS for SUB 1-4 with LINK switches. • 60mm audio FADER
• EFFECTS to MONITORS
company for Musician’s Institute
Unparalleled design for live sound. * 2 USB Power ports in Hollywood, CA.
* C844U, C1644U,
C844U C1644U
POWERED C1644P
• 2 - 9 BAND GRAPHIC’s
The C844U, C1644U and the C1644P powered mixer C1644P - feature 6 sends
• EQ ASSIGN switches 8 CH, 6 CH Sends, 3-band EQ
offers 6 SENDS per channel – 4 Monitor and 2 Effects, 4 monitor, 2 effects, and 3 16 CH, 6 CH Sends, 3-band EQ
• 10 segment VU meters
Band EQ with Mid Sweep
plus a 3 BAND EQ with LO and HI shelving plus a MID • VU & PHONES switches
sweep. The powered C1644P offers 4 internal power Stereo HEADPHONE level
amps delivering 1200w in a Road Warrior™ case. • OUTPUTS: BAL XLR’s &
1/4”, USB L/R
CONCERT SERIES SPECS • OUTPUT:+28dBm
Freq. response: 20-20k Hz ±1 dB • THD less than .01%
THD distortion: .01% 20-20k Hz
E I N: -117 dBm * Not available on C844U,
S/N Ratio 90 dB C1644U & C1644P
Dynamic Range: 104 dB
Mic Gain: 52 dB
Line Gain: 30 dB
Total Gain: 72 dB (balanced) 16 channels/4 power amps
Max Output: +28 dBm 1200w 4 x 300w @ 4Ω, Freq Resp 20 -
Power Req. 90 to 250VAC 50-60Hz, 50VA
C1644P 120VAC 60 Hz 20k Hz, THD .1%, Outputs: four 1/4” and
C2448, 32448 Dim: (WxDxH) Speakon™, Built-in ROAD WARRIOR™ case
Channel Strip C844U: 36cm x 36cm x 8cm wt: 5kgs
other models
with 6 sends C1644U: 57cm x 36cm x 8cm wt: 7kgs
and 3 band EQ C1644P: 63cm x 40cm x 23cm wt. 17kgs
C2448: 76cm x 41cm x 8cm wt: 10kgs
RW1644 Road Warrior™ Case for C1644 C1644P
RW2448 Road Warrior™ Case for C2448 6 CH Sends, 3-band EQ USB not available
C3248: 96cm x 41cm x 8cm wt: 13kgs RW3248 Road Warrior™ Case for C3248
54 www.carvinworld.com www.carvinworld.com 55