The case study describes a £56,000 board room fit-out project for Homerton Hospital. Various designs were presented to the client before they chose oak as the base timber. The walls were clad in oak veneer boards and lighting was housed in an overhead oak pelmet arrangement. A bespoke oak boardroom table was designed to complement the wall panelling. The project took under two weeks to complete.

1. case study
Client: Homerton Hospital
Project: Board Room Fit-Out
Value: £56,000
Giving you beautiful Joinery
This project is an example of the work we do. It involved the
complete strip out and re-fit of the hospital board room.
Various designs were presented to the client who eventually
chose oak, as the base timber for the project.
Walls were clad floor to ceiling with matching oak veneer
boards to give a modern and expensive feel. Lighting was
housed in an overhead oak pelmet arrangement in the same
shape as the table, suspended from the ceiling on fine wire
cables
The bespoke boardroom table was designed to complement
the wall panelling. Traditional French polish finish added the
icing to the cake of this beautiful room.
The whole project took little under two weeks to complete.
Please contact Ray Spooner on 020 8594 2594 for a free quotation
363 Ripple Road, Barking, Essex. IG1 19PN. t: 020 8594 2594 e: info@carmelcrest.co.uk w: www.carmelcrest.co.uk

2. case study
Please contact Ray Spooner on 020 8594 2594 for a free quotation
363 Ripple Road, Barking, Essex. IG1 19PN. t: 020 8594 2594 e: info@carmelcrest.co.uk w: www.carmelcrest.co.uk