This handheld diving flashlight has a maximum output of 3800 lumens from its CREE XM-L2 LED. It uses 3 18650 lithium batteries and has a side-push magnetic switch for operating its three output modes underwater up to 200 meters depth. It can run for up to 2 hours on high mode and is suitable as a backup light for professional and recreational diving.

1. DIV15 英文说明书
This hand-held diving flashlight use CREE latest XM-L2 series LED, maximum output is
3800 lumens. The head side-push on/off magnetic switch is convenient to operate
underwater. It works by use of 3*32650 rechargeable lithium batteries, with three output
modes- low mode, medium mode and high mode, up to 2 hours runtime in high mode.
Besides, three O-rings waterproof protection, excellent sealing design together with 5mm
thickness tempered glass guarantee this diving light can withstand underwater depth 200
meters. With a beam angle of 11 degrees, it is absolutely one of the necessary back-up
lights for your professional and leisure diving.
◆Technical Parameters:
ANSI High Medium Low Strobe SOS
Lumen Output 3800lumens 1600lumens 450 lumens / /
Runtime 2 Hours 5.2Hours 18Hours / /
Luminous Intensity 40000cd
Beam Distance 400m
Drop Test 1.5m
IP Grade IPX-8 underwater 200m
Net Weight 455g(without battery)
Underwater Weight 335g(with battery)
These parameters above have been tested under laboratory conditions, so they may vary
between different batteries and environments.
◆ Product Specifications:
-Utilize Cree XM-L2(U4) LED, lifespan is over 50,000 hours;
-Uses 2* 32650 rechargeable lithium batteries;
-Regulated power supply maintain constant current output;
-Over-heat protection, preventing the high temperature from influencing the normal use;
-Low voltage warning function to remind the user to change the batteries;
-Reverse polarity protection to prevent from installing battery wrong;
-Side-push on/off magnetic switch, three output modes, very easy to operate;
-Three O rings design to ensure its waterproof function underwater 200 meters;
-The crust is made of T6061 Aircraft-grade aluminum;
-Premium type III military hard-anodized finish for abrasion and corrosion resistance;
-5mm Toughened glass can stand higher water pressure resistance;
-Alloy aluminum SMO reflector;
-Dimensions: 62(Head dia.)*40(Body dia.)*226(Length )mm*455g(net weight);
-Underwater Weight: 335g (with battery);
-Standard accessories: 3 spare O-rings, Lubricant, lanyard, user manual and Neutral box;
-Other accessories (optional): gift box, battery，charger, ball joint, light handle.

2. ◆ Operation:
a) Battery installation
Keep the positive pole direction of battery same as the light head, tighten the head to turn
on the light.
b) Push the magnetic switch to turn on/off the light and change modes.
放 DIV15 图片
Note:
1) The side-push on/off switch has 5mm safety action design, please push the switch to the
bottom and back to turn on/off and change modes.
2) To ensure the magnetic switch work normally, please keep the flashlight away from any
magnetic goods, iron things and etc.
3) All of the connection sections(except the switch) are sealed before shipment, Please don’t
arbitrarily disassemble it.
4) Avoiding the possibility of seeping water, we suggest you tighten the flashlight before
diving.
5) Please take the batteries out of the flashlight if you didn’t use it for long time, or the
flashlight may be damaged by reason of the battery leakage or explosion.
◆ Flashlight maintenance:
1） Please immerse the diving flashlight in the fresh water for few minutes after diving every
time and clean the flashlight after immersing;
2） Please put lubricating oil on the switch parts after diving
3） Please don’t drop or place your diving flashlight in sands, in case the sands go into the
switch parts or screw threads parts.
4） Please keep inspecting the O-rings regularly, please change a new one once they are
damaged.
5） Please periodically clean the conductive contact surfaces, ensure the flashlight work
normally.
◆ FAQ and Self-check:
When the flashlight unusually or does not work, it might be the reasons below
1) The battery power is too low-----please change new batteries
2) The screw threads or conductive contact parts are dirty----please clean them with alcohol
solution.
Please contact the local dealers for warranty if the flashlight still doesn’t work according to the
above methods.
◆ Friendly tips:
The flashlight has a high brightness, please DO NOT shine people naked eyes or look at the
light directly in case of damaging the eyesight, especially for children.