Borel Swiss Glass furnace 1000°C
•
0 likes•9 views
This document provides specifications for electric glass furnaces made by SOLO Swiss SA. The furnaces, called FF 1000 models, are robustly built from folded sheet steel with multilayer insulation. They have openings assisted by hydraulic cylinders and exhaust vents. Heating is provided by spiral wound resistors on the roof. Models range from 100 to 560 liters in size and 8 to 22 kW in power. Documentation includes CE marking and operating instructions.
Report
Share
Report
Share
Download to read offline
Recommended
Thermoconvect Furnace 600°C
Air circulating furnace for all applications, robustly built. Stainless steel interior. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Fan with stainless steel turbine. Battery of shielded electrical resistors. 3 x 400 VAC. Axron Swiss PID temperature controller. CE marking and operating instructions in English. Delivered with: 2 shelves.
Chamber Furnaces Borel Swiss 1600°C
Electric chamber furnace for all applications, high temperature. Robust construction made of bent plate. Vertical lifting front door. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Silicone carbide heating elements. The heating is turned off at the opening of the door. Electricity: 3 x 400 VAC. Axron Swiss PID temperature controller. CE marking and operating instructions in English. Delivered with: Removable ceramic sole.
Chamber furnace Borel Swiss 1500°C
Electric chamber furnace for all applications, high temperature. Robust construction made of bent plate. Vertical lifting front door. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Silicone carbide heating elements. The heating is turned off at the opening of the door. Electricity: 3x400 VAC. Axron Swiss PID temperature controller. CE marking and operating instructions in English. Delivered with Removable ceramic sole.
Tube furnace Borel Swiss 1600°C
Tubular electric furnace, for all applications. Robust construction made of bent plate. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Working chamber surrounded by heating elements. Single-phase 230 VAC, 50 Hz. Axron Swiss PID temperature controller. CE marking and operating instructions in English.
Opening tube furnace 1100°C
Opening electric tube furnace for all applications. Robust construction made of bent plate. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Working chamber surrounded by heating elements. Voltage 230 VAC, 50 Hz up to 4.0 kW and voltage 3x400 VAC frequency 50 Hz from 4.0 kW. Axron Swiss PID temperature controller. CE marking and operating instructions in English.
Chamber furnace Borel Swiss 1400°C
Electric chamber furnace for all applications, high temperature. Robust construction in bent plate. Vertical lifting front door. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Silicone carbide heating elements. The heating is turned off at the opening of the door. Electricity: 9 liters and less, single-phase 230 VAC, 50 Hz. From 15 liters, 3x400 VAC. Axron Swiss PID temperature controller. CE marking and operating instructions in English. Delivered with removable ceramic sole.
Tube furnace Borel Swiss 1500°C
Tubular electric furnace, for all applications. Robust construction made of bent plate. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Heating elements in silicon carbide. Electricity: 3x400 VAC. Axron Swiss PID temperature controller. CE marking and operating instructions in English.
Tube furnaces Borel Swiss 1200°C
Tubular electric furnace, for all applications. Robust construction made of bent plate. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Working chamber surrounded by heating elements. Single-phase 230 VAC, 50 Hz. Axron Swiss PID temperature controller. CE marking and operating instructions in English.
Recommended
Thermoconvect Furnace 600°C
Air circulating furnace for all applications, robustly built. Stainless steel interior. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Fan with stainless steel turbine. Battery of shielded electrical resistors. 3 x 400 VAC. Axron Swiss PID temperature controller. CE marking and operating instructions in English. Delivered with: 2 shelves.
Chamber Furnaces Borel Swiss 1600°C
Electric chamber furnace for all applications, high temperature. Robust construction made of bent plate. Vertical lifting front door. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Silicone carbide heating elements. The heating is turned off at the opening of the door. Electricity: 3 x 400 VAC. Axron Swiss PID temperature controller. CE marking and operating instructions in English. Delivered with: Removable ceramic sole.
Chamber furnace Borel Swiss 1500°C
Electric chamber furnace for all applications, high temperature. Robust construction made of bent plate. Vertical lifting front door. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Silicone carbide heating elements. The heating is turned off at the opening of the door. Electricity: 3x400 VAC. Axron Swiss PID temperature controller. CE marking and operating instructions in English. Delivered with Removable ceramic sole.
Tube furnace Borel Swiss 1600°C
Tubular electric furnace, for all applications. Robust construction made of bent plate. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Working chamber surrounded by heating elements. Single-phase 230 VAC, 50 Hz. Axron Swiss PID temperature controller. CE marking and operating instructions in English.
Opening tube furnace 1100°C
Opening electric tube furnace for all applications. Robust construction made of bent plate. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Working chamber surrounded by heating elements. Voltage 230 VAC, 50 Hz up to 4.0 kW and voltage 3x400 VAC frequency 50 Hz from 4.0 kW. Axron Swiss PID temperature controller. CE marking and operating instructions in English.
Chamber furnace Borel Swiss 1400°C
Electric chamber furnace for all applications, high temperature. Robust construction in bent plate. Vertical lifting front door. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Silicone carbide heating elements. The heating is turned off at the opening of the door. Electricity: 9 liters and less, single-phase 230 VAC, 50 Hz. From 15 liters, 3x400 VAC. Axron Swiss PID temperature controller. CE marking and operating instructions in English. Delivered with removable ceramic sole.
Tube furnace Borel Swiss 1500°C
Tubular electric furnace, for all applications. Robust construction made of bent plate. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Heating elements in silicon carbide. Electricity: 3x400 VAC. Axron Swiss PID temperature controller. CE marking and operating instructions in English.
Tube furnaces Borel Swiss 1200°C
Tubular electric furnace, for all applications. Robust construction made of bent plate. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Working chamber surrounded by heating elements. Single-phase 230 VAC, 50 Hz. Axron Swiss PID temperature controller. CE marking and operating instructions in English.
Tube furnaces Borel Swiss 1400°C
Tubular electric furnace, for all applications. Robust construction made of bent plate. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Heating elements in silicon carbide. Electricity: 3x400 VAC. Axron Swiss PID temperature controller. CE marking and operating instructions in English.
Top loading furnace Borel Swiss 1100°C
Compact electric chamber furnace for all applications. Mechanically welded frame. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Exhaust vent on top. Coil resistors on ceramic tubes. The heating is turned off at the opening of the door. Electricity: 39 liters, single-phase 230 VAC, 50 Hz. 58 liters 3x400 VAC. Axron Swiss PID temperature controller. CE marking and operating instructions in English.
Borel Swiss Industrial furnace 600°C
Electric chamber furnace for all applications. Mechanically welded frame. Racks according to model. Multilayer insulation. Interior in ceramic fiber and refractory bricks. Air intake and exhaust controlled by temperature controller.
Salt bath furnace 1000°C
Salt bath furnace for quenching up to 1000 °C. Access to crucible from top, manual cover closing. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Electrical coil resistors all around the crucible. Resistors mounted on ceramic tubes. Electricity 3x400 VAC, 50 Hz. Independent electric control box to mount on a wall. Thermocouple outside of crucible. Axron Swiss PID temperature controller. CE marking and operating instructions in English. Delivered without crucible, customised manufacturing.
Industrial furnace Borel Swiss 1100°C
The FI 1100 is an electric chamber furnace capable of reaching temperatures up to 1100°C. It is constructed with a mechanically welded frame and multilayer insulation. Various rack models are available depending on the interior volume. Air intake and exhaust are controlled by the temperature controller to maintain optimal heating from electrical coil resistors mounted on the ceramic interior walls. Models range in interior volume from 52 to 1610 liters and are supplied with documentation and a removable ceramic sole.
Boogie-hearth furnaces 1250°C
Chamber furnace with mobile hearth (trolley on rails). Robustly constructed in folded and profiled sheet steel. Multilayer insulation. Interior in ceramic fibre and refractory bricks.
Borel Swiss Fixed Crucible Melting Furnace 1200°C
This document provides specifications for a fixed crucible melting furnace that can reach 1200°C. The furnace uses electrical coil resistors mounted around a ceramic crucible to provide heating. It has a multilevel insulation system and can hold various masses of non-ferrous metals in different sized ceramic crucibles. Temperature is regulated using a thermocouple and PID controller. Various models are listed with internal volumes, crucible dimensions, external dimensions, power requirements, and weights.
Car-hearth furnaces 1100°C
Chamber furnace with mobile hearth (trolley on rails). Robustly constructed in folded and profiled sheet steel. Multilayer insulation. Interior in ceramic fibre and refractory bricks.
Car-hearth furnace 1200°C
Chamber furnace with mobile hearth (trolley on rails). Robust construction made of bent plate. Vertical lifting front door. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Exhaust vent on top. Coil resistors on ceramic tubes. The heating is turned off at the opening of the door. Electricity: 3x400 VAC. Axron Swiss PID temperature controller. CE marking and operating instructions in English. Delivered with removable ceramic sole.
Air circulating furnace 650°C
Air circulating furnace for all applications. Robust construction made of bent plate. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Air circulation by a turbine to improve
homogeneity within furnace. Battery of shielded electrical resistors. Electricity: 3x400 VAC. PID Axron Swiss digital temperature controller. Timer. CE marking and operating instructions in English.
Delivered with furnace basket.
Bench-top furnaces 1100°C
Compact electric chamber furnace for all applications. Horizontal swing door. One-piece muffle. Multilayer insulation. Interior in ceramic fibre and refractory bricks.
Thermodryer ovens 400°C
Forced convection electrical oven for all applications. Mild or stainless steel for versions -I, several shelves. Rock wool insulation of all surfaces, including door. Stainless steel motor ventilator. Adjustable air outlet. Battery of shielded electrical resistors. Electricity: 3x400 VAC. Axron Swiss PID temperature controller, over temperature safety. CE marking and operating instructions in English.
Delivered with: 2 shelves (perforated plates).
Top loading furnace Borel Swiss 1280°C
The document provides specifications for top loading furnaces from SOLO Swiss SA that can reach temperatures of 1280°C. The furnaces have a mechanically welded frame and multilayer insulation interior. Exhaust vents are located on top and coil resistors provide heating that automatically turns off when the door is opened. Models are available in 39 or 58 liter internal volumes for single or 3-phase power, and include CE marking, operating instructions, and temperature control via an Axron Swiss PID controller. Dimensions and other details are listed for the two models.
High temperature furnace 1800°C
Electric chamber furnace for all applications, high temperature. Robust construction made of bent plate. Vertical lifting front door. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Heating elements type MoSi2. The heating is turned off at the opening of the door. Electricity: Single-phase 230 VAC, 50 Hz up to 7 kW and 3x400 VAC, 50 Hz above 7 kW. Axron Swiss PID temperature controller. CE marking and operating instructions in English.
Thermonatural ovens 350°C
Natural convection electrical oven for all applications. Mild or stainless steel for versions -I, several shelves. Rock wool insulation of all surfaces, including door. Battery of shielded electrical resistors. Single-phase 230 VAC, 50 Hz. Axron Swiss PID temperature controller. CE marking and operating instructions in English. Delivered with: 2 shelves.
High temperature furnace 1700°C
Electric chamber furnace for all applications, high temperature. Robust construction made of bent plate. Vertical lifting front door. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Heating elements type MoSi2. The heating is turned off at the opening of the door. Electricity: Single-phase 230 VAC, 50 Hz up to 7 kW and 3x400 VAC, 50 Hz above 7 kW. Axron Swiss PID temperature controller. CE marking and operating instructions in English.
Chamber furnace Thermolab 1100°C
Electric chamber furnace, testing furnace, not suitable for intensive industrial use.
Robustly constructed in folded sheet steel, horizontal opening door for 8 liter model, vertical for 3 liter version. Light fibres for all walls. Air hole in the door, or at the back according to model. Heating muffle. Heating interruption on door opening. Single-phase 230 VAC, 50 Hz. Axron Swiss PID temperature controller. Delivered with removable ceramic sole.
Kit completi sistema gas infiammabile per forni a pozzo
Insierne compatto e sicuro di controllo dei gas di protezione per forni di trattamento termico.
Insieme compatto e sicuro di controllo dei gas di protezione per forni di trattamento termico con manopola metallica per un utilizzo con gas infiammabile. Ideale per RetroFit e per l’aggiornamento secondo le norme di sicurezza dei vecchi forni sprovvisti di sistemi di sicurezza.
Flammable gas safety kits for muffle furnaces
Flammable gas safety kit for muffle furnaces. Compact and safe pack for protective gas piloting for metal muffle furnaces for thermal treatment for use with flammable gas.
Flammable gas safety kit for muffle furnaces. Compact and safe pack to pilot protective gas inlet, while using metal muffle furnaces for thermal treatment with flammable gas. Ideal for RetroFit and safety compliance to the latest standards of old installations.
Hornos de fusión alta temperatura 1350°C
Horno de crisol móvil para fusión o mantenimiento en fusión de metales no ferrosos. Manipulación del crisol con las pinzas. Acceso al crisol por la parte superior, cierre manual de la tapa. Aislamiento multicapa. Interior en fibra cerámica y ladrillo refractario.
Forni ribaltabili Borel Swiss 1050°C
Forno a camera metallica ribaltabile verso una vasca di tempra. Per applicazioni di tempra o di ricottura, lavoro sotto gas inerte e infiammabile (in opzione per il modello *-40). Passaggio dei pezzi dal forno alla vasca di tempra senza il contatto con l'aria. Vasca di recupero dei pezzi. Struttura metallica isolata della vasca di tempra. Elementi riscaldanti attorno alla cassa utile. Vasca di tempra in acciaio inox per riscaldare il liquido di tempra (olio, emulsioni, soluzioni)(opzione modello *-40). 400 V per il modello *-40 e 3x400 VAC per il modello *-320, frequenza 50 Hz. Venduto senza spina elettrica. Regolatore PID Axron Swiss. Programmatore orario di avvio/di spegnimento in differita. Documenti: certificazione CE, istruzioni per l’uso. Venduto con pala. Opzione: Ribaltamento motorizzato automatico del forno in fine di ciclo.
Hornos basculante Borel Swiss 1050°C
Pequeño horno con cámara metálica basculante hacia tanque de temple. Para aplicaciones de temple o recocido, trabajos con gas inerte y inflamable (opcional para el modelo *-40). Paso de las piezas del horno al tanque de temple sin entrar en contacto con el aire. Tanque de recuperación de piezas. Carcasa metálica aislada del tanque de temple. Elementos calefactores alrededor del recinto útil. Tanque de temple en acero inoxidable para calentar líquido de templado (aceite, emulsiones, disoluciones).(opción modelo *-40). Tensión 400 VAC para el modelo *-40 y 3x400 VAC para el modelo *-320, frecuencia 50 Hz. No incorpora clavija eléctrica. Regulador PID Axron Swiss. Programador horario para puesta en marcha/interrupción diferida. Certificación CE, manual de uso. Incorpora Pala. Opción: Balanceo motorizado automático del horno al final de ciclo.
More Related Content
Similar to Borel Swiss Glass furnace 1000°C
Tube furnaces Borel Swiss 1400°C
Tubular electric furnace, for all applications. Robust construction made of bent plate. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Heating elements in silicon carbide. Electricity: 3x400 VAC. Axron Swiss PID temperature controller. CE marking and operating instructions in English.
Top loading furnace Borel Swiss 1100°C
Compact electric chamber furnace for all applications. Mechanically welded frame. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Exhaust vent on top. Coil resistors on ceramic tubes. The heating is turned off at the opening of the door. Electricity: 39 liters, single-phase 230 VAC, 50 Hz. 58 liters 3x400 VAC. Axron Swiss PID temperature controller. CE marking and operating instructions in English.
Borel Swiss Industrial furnace 600°C
Electric chamber furnace for all applications. Mechanically welded frame. Racks according to model. Multilayer insulation. Interior in ceramic fiber and refractory bricks. Air intake and exhaust controlled by temperature controller.
Salt bath furnace 1000°C
Salt bath furnace for quenching up to 1000 °C. Access to crucible from top, manual cover closing. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Electrical coil resistors all around the crucible. Resistors mounted on ceramic tubes. Electricity 3x400 VAC, 50 Hz. Independent electric control box to mount on a wall. Thermocouple outside of crucible. Axron Swiss PID temperature controller. CE marking and operating instructions in English. Delivered without crucible, customised manufacturing.
Industrial furnace Borel Swiss 1100°C
The FI 1100 is an electric chamber furnace capable of reaching temperatures up to 1100°C. It is constructed with a mechanically welded frame and multilayer insulation. Various rack models are available depending on the interior volume. Air intake and exhaust are controlled by the temperature controller to maintain optimal heating from electrical coil resistors mounted on the ceramic interior walls. Models range in interior volume from 52 to 1610 liters and are supplied with documentation and a removable ceramic sole.
Boogie-hearth furnaces 1250°C
Chamber furnace with mobile hearth (trolley on rails). Robustly constructed in folded and profiled sheet steel. Multilayer insulation. Interior in ceramic fibre and refractory bricks.
Borel Swiss Fixed Crucible Melting Furnace 1200°C
This document provides specifications for a fixed crucible melting furnace that can reach 1200°C. The furnace uses electrical coil resistors mounted around a ceramic crucible to provide heating. It has a multilevel insulation system and can hold various masses of non-ferrous metals in different sized ceramic crucibles. Temperature is regulated using a thermocouple and PID controller. Various models are listed with internal volumes, crucible dimensions, external dimensions, power requirements, and weights.
Car-hearth furnaces 1100°C
Chamber furnace with mobile hearth (trolley on rails). Robustly constructed in folded and profiled sheet steel. Multilayer insulation. Interior in ceramic fibre and refractory bricks.
Car-hearth furnace 1200°C
Chamber furnace with mobile hearth (trolley on rails). Robust construction made of bent plate. Vertical lifting front door. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Exhaust vent on top. Coil resistors on ceramic tubes. The heating is turned off at the opening of the door. Electricity: 3x400 VAC. Axron Swiss PID temperature controller. CE marking and operating instructions in English. Delivered with removable ceramic sole.
Air circulating furnace 650°C
Air circulating furnace for all applications. Robust construction made of bent plate. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Air circulation by a turbine to improve
homogeneity within furnace. Battery of shielded electrical resistors. Electricity: 3x400 VAC. PID Axron Swiss digital temperature controller. Timer. CE marking and operating instructions in English.
Delivered with furnace basket.
Bench-top furnaces 1100°C
Compact electric chamber furnace for all applications. Horizontal swing door. One-piece muffle. Multilayer insulation. Interior in ceramic fibre and refractory bricks.
Thermodryer ovens 400°C
Forced convection electrical oven for all applications. Mild or stainless steel for versions -I, several shelves. Rock wool insulation of all surfaces, including door. Stainless steel motor ventilator. Adjustable air outlet. Battery of shielded electrical resistors. Electricity: 3x400 VAC. Axron Swiss PID temperature controller, over temperature safety. CE marking and operating instructions in English.
Delivered with: 2 shelves (perforated plates).
Top loading furnace Borel Swiss 1280°C
The document provides specifications for top loading furnaces from SOLO Swiss SA that can reach temperatures of 1280°C. The furnaces have a mechanically welded frame and multilayer insulation interior. Exhaust vents are located on top and coil resistors provide heating that automatically turns off when the door is opened. Models are available in 39 or 58 liter internal volumes for single or 3-phase power, and include CE marking, operating instructions, and temperature control via an Axron Swiss PID controller. Dimensions and other details are listed for the two models.
High temperature furnace 1800°C
Electric chamber furnace for all applications, high temperature. Robust construction made of bent plate. Vertical lifting front door. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Heating elements type MoSi2. The heating is turned off at the opening of the door. Electricity: Single-phase 230 VAC, 50 Hz up to 7 kW and 3x400 VAC, 50 Hz above 7 kW. Axron Swiss PID temperature controller. CE marking and operating instructions in English.
Thermonatural ovens 350°C
Natural convection electrical oven for all applications. Mild or stainless steel for versions -I, several shelves. Rock wool insulation of all surfaces, including door. Battery of shielded electrical resistors. Single-phase 230 VAC, 50 Hz. Axron Swiss PID temperature controller. CE marking and operating instructions in English. Delivered with: 2 shelves.
High temperature furnace 1700°C
Electric chamber furnace for all applications, high temperature. Robust construction made of bent plate. Vertical lifting front door. Multilayer insulation. Interior in ceramic fibre and refractory bricks. Heating elements type MoSi2. The heating is turned off at the opening of the door. Electricity: Single-phase 230 VAC, 50 Hz up to 7 kW and 3x400 VAC, 50 Hz above 7 kW. Axron Swiss PID temperature controller. CE marking and operating instructions in English.
Chamber furnace Thermolab 1100°C
Electric chamber furnace, testing furnace, not suitable for intensive industrial use.
Robustly constructed in folded sheet steel, horizontal opening door for 8 liter model, vertical for 3 liter version. Light fibres for all walls. Air hole in the door, or at the back according to model. Heating muffle. Heating interruption on door opening. Single-phase 230 VAC, 50 Hz. Axron Swiss PID temperature controller. Delivered with removable ceramic sole.
Similar to Borel Swiss Glass furnace 1000°C (17)
More from Borel Swiss
Kit completi sistema gas infiammabile per forni a pozzo
Insierne compatto e sicuro di controllo dei gas di protezione per forni di trattamento termico.
Insieme compatto e sicuro di controllo dei gas di protezione per forni di trattamento termico con manopola metallica per un utilizzo con gas infiammabile. Ideale per RetroFit e per l’aggiornamento secondo le norme di sicurezza dei vecchi forni sprovvisti di sistemi di sicurezza.
Flammable gas safety kits for muffle furnaces
Flammable gas safety kit for muffle furnaces. Compact and safe pack for protective gas piloting for metal muffle furnaces for thermal treatment for use with flammable gas.
Flammable gas safety kit for muffle furnaces. Compact and safe pack to pilot protective gas inlet, while using metal muffle furnaces for thermal treatment with flammable gas. Ideal for RetroFit and safety compliance to the latest standards of old installations.
Hornos de fusión alta temperatura 1350°C
Horno de crisol móvil para fusión o mantenimiento en fusión de metales no ferrosos. Manipulación del crisol con las pinzas. Acceso al crisol por la parte superior, cierre manual de la tapa. Aislamiento multicapa. Interior en fibra cerámica y ladrillo refractario.
Forni ribaltabili Borel Swiss 1050°C
Forno a camera metallica ribaltabile verso una vasca di tempra. Per applicazioni di tempra o di ricottura, lavoro sotto gas inerte e infiammabile (in opzione per il modello *-40). Passaggio dei pezzi dal forno alla vasca di tempra senza il contatto con l'aria. Vasca di recupero dei pezzi. Struttura metallica isolata della vasca di tempra. Elementi riscaldanti attorno alla cassa utile. Vasca di tempra in acciaio inox per riscaldare il liquido di tempra (olio, emulsioni, soluzioni)(opzione modello *-40). 400 V per il modello *-40 e 3x400 VAC per il modello *-320, frequenza 50 Hz. Venduto senza spina elettrica. Regolatore PID Axron Swiss. Programmatore orario di avvio/di spegnimento in differita. Documenti: certificazione CE, istruzioni per l’uso. Venduto con pala. Opzione: Ribaltamento motorizzato automatico del forno in fine di ciclo.
Hornos basculante Borel Swiss 1050°C
Pequeño horno con cámara metálica basculante hacia tanque de temple. Para aplicaciones de temple o recocido, trabajos con gas inerte y inflamable (opcional para el modelo *-40). Paso de las piezas del horno al tanque de temple sin entrar en contacto con el aire. Tanque de recuperación de piezas. Carcasa metálica aislada del tanque de temple. Elementos calefactores alrededor del recinto útil. Tanque de temple en acero inoxidable para calentar líquido de templado (aceite, emulsiones, disoluciones).(opción modelo *-40). Tensión 400 VAC para el modelo *-40 y 3x400 VAC para el modelo *-320, frecuencia 50 Hz. No incorpora clavija eléctrica. Regulador PID Axron Swiss. Programador horario para puesta en marcha/interrupción diferida. Certificación CE, manual de uso. Incorpora Pala. Opción: Balanceo motorizado automático del horno al final de ciclo.
Kifföfen Borel Swiss 1050°C
Kippofen mit Abschreckbad zum Härten oder Glühen mit Schutzgas und brennbares Gas (brennbares Gas: optional für Modell *-40). Übergabe der behandelten Teile mittels Kippbewegung in das Abschmeckbad ohne Luftkontakt. Isoliertes Metallgehäuse (Keramikfaser-Isolierung). Heizmuffel um Heizkanal. Abkühlbecken aus rostfreiem Stahl für Kühlflüssigkeit (Öl, Emulsionen, Lösungen) mit Heizung (Optional für Model *-40). Spannung 400 VAC für Modell *-40 und 3x400 VAC für Modell *-320, Frequenz 50 Hz. Lieferung ohne Stecker. Axron Swiss PID-Regler. Programmierbarer Zeitschaltuhr für verzögerte Ein- und Ausschaltung. CE Zertifizierung und Bedienungsanleitung in Deutsch. Geliefert mit Ladeschaufel. Option: Am Ende des Zyklus kann das Kippen, durch einen Motor, automatisch sein.
Four basculant Borel Swiss 1050°C
Four à chambre métallique basculant vers un bac de trempe. Pour applications de trempe ou de recuit, travail sous gaz inerte et inflammable (en option pour modèle *-40). Passage des pièces du four au bac de trempe sans le contact avec l'air. Bac de récupération des pièces. Bac de récupération des pièces. Carcasse métallique isolée du bac de trempe. Eléments chauffants (en option modèle *-40) entourant l’enceinte utile. Bac de trempe en acier inox pour liquide de trempe (huile, émulsions, solutions). Tension 400 VAC, 50 Hz pour modèle *-40 et 3x400 VAC pour modèle *-320, fréquence 50 Hz. Livré sans fiche électrique. Régulateur PID Axron Swiss. Programmateur horaire pour mise en marche/arrêt différé. Certification CE, notice d’utilisation en français. Livré avec pelle. Option: Basculement motorisé automatique du four en fin de cycle.
Tilting furnaces Borel Swiss 1050°C
Furnace with metal chamber that tilts into a quenching tank. For quenching or annealing applications, work under inert and flammable (optional for model *-40) gas. Transfer of the parts from furnace into the quenching tank, without air contact. Parts recovery tank. Metallic housing is insulated from quenching tank. Heating elements surrounded working chamber. Stainless steel tank for quenching liquid (oil, emulsions, solutions) with heating (optional for model *-40). Electricity: Model *-40, single-phase 400 VAC, 50 Hz. Model *-320, 3x400 VAC. Delivered without electric plug. Axron Swiss PID temperature controller. Time programmer for delayed on/off. CE marking and operating instructions in English. Delivered with Ladle. Option: Automatic tilting of the furnace at the end of the cycle.
Borel Products catalogue 2023
The document provides information about furnaces and ovens manufactured by Borel Swiss. It describes the company's history since 1918 and its product range including standard furnaces, ovens, kilns and other equipment. Borel furnaces are used worldwide in industries such as glass, ceramics, metals, plastics, medical and more. The document includes specifications for various laboratory and industrial oven models ranging from 32 to 8000 liters as well as furnace models up to 1600°C.
Generatori di ammoniaca dissociata 950°C
Generatore di ammoniaca dissociata per trattamenti termici. Telaio saldato meccanicamente. Isolamento ceramico della storta riscaldata. Elementi riscaldanti che circondano la cassa utile. Alimentazione: 3x400 VAC, frequenza 50 Hz. Regolatore PID Axron Swiss. Programmatore orario per l’accensione/lo spegnimento in differita. Certificazione CE, istruzioni per l’uso. Dissociazione dell’ammoniaca: in uscita composizione costante con il 25% di azoto e il 75% di idrogeno. Con 1 kg di ammoniaca si ottengono 2,7 m3 di gas di protezione fortemente riduttore.
Generador de amoníaco craqueado 950°C
Generador de amoníaco craqueado para tratamiento térmico, pulimento y soldadura (sin oxidación ni coloración). Chasis mecanosoldado. Aislamiento cerámico de la retorta caliente. Elementos calefactores alrededor del recinto útil. Tensión 3x400 VAC, frecuencia 50 Hz. Regulador PID Axron Swiss. Programador horario para puesta en marcha/interrupción diferida. Certificación CE, manual de uso. Craqueado del amoníaco: en salida composición constante de 25% de nitrógeno y 75% de hidrógeno.
Para 1Kg de amoníaco, se obtienen 2,7 m3 de gas de protección altamente reductor.
Ammoniak-Spalter 950°C
Ammoniak-Spaltgas-Generator für Wärmebehandlungen, Löten und Schweissen. Geschweißte Rahmenkonstruktion. Mehrschichtenisolierung. Feuerfeste Keramik-Isolierung. Heizelemente um den Nutzraum. Spannung 3x400 V, Frequenz 50 Hz. Axron Swiss PID-Regler. Programmierbarer Zeitschaltuhr für verzögerte Ein- und Ausschaltung. CE Zertifizierung und Bedienungsanleitung in Deutsch. Spalten von Ammoniak, konstante Zusammensetzung von 25% Stickstoff und 75% Wasserstoff. Für 1kg Ammoniak zerhält man 2,7 m³ Schutzgas.
Générateur d'ammoniac craqué 950°C
Générateur d'ammoniac craqué pour traitements thermiques, brasage et soudage (sans oxydation ni coloration). Châssis mécano-soudé. Isolation céramique de la cornue chauffée. Eléments chauffants entourant l'enceinte utile. Tension 3x400 VAC, fréquence 50 Hz. Régulateur PID Axron Swiss. Programmateur horaire pour mise en marche/arrêt différé. Certification CE, notice d’utilisation en français. Craquage de l’ammoniac : en sortie composition constante de 25% d’azote et 75% d’hydrogène. Pour 1 Kg d’ammoniac, on obtient 2,7 m3 de gaz de protection fortement réducteur.
Cracked ammonia generator 950°C
Cracked ammonia generator for heat treatment, brazing and welding. Mechanically welded frame. Heated retort is insulated with ceramics. Heating elements surrounded working chamber. Electricity: 3x400 VAC. Axron Swiss PID temperature controller. Time programmer for delayed on/off. CE marking and operating instructions in English. Ammonia cracking: at output, constant composition of 25% nitrogen and 75% hydrogen. For 1 kg of ammonia, 2.7 m3 of strongly reducing protective gas is produced.
Forni a bagno di sale 1000°C
Forno a bagno di sale per la tempra fino a 1000 °C. Accesso al crogiolo dalla parte superiore, chiusura manuale del coperchio. Isolamento multistrato. Interno in fibre ceramiche e mattoni refrattari. Resistenze elettriche a fascia attorno al crogiolo. Fissaggio delle resistenze su tubi in ceramica. Alimentazione: 3x400 VAC, frequenza 50 Hz. Quadro elettrico indipendente da fissare. Termocoppia all’esterno del crogiolo. Regolatore PID Axron Swiss. Certificazione CE, istruzioni per l’uso. Venduto senza crogiolo, fabbricazione su misura.
Hornos de baño de sales 1000°C
Este documento describe hornos de baño de sales para temple hasta 1000°C fabricados por SOLO Swiss SA. Los hornos tienen aislamiento multicapa en el interior y calefacción por resistencias eléctricas alrededor del crisol. Se ofrecen en varios tamaños con volúmenes internos de 19 a 366 litros y capacidades de carga de 80 kg a 1500 kg. Cada modelo viene con su código, dimensiones y potencia eléctrica.
Salzbadöfen 1000°C
Salzbadofen zum Abschrecken bis 1000°C. Zugang zum Tiegel von oben, manueller
Verschluss des Deckels. Mehrschichtenisolierung. Feuerfeste Keramik-Isolierung. Elektrische Heizelemente rund um den Tiegel (Spiralenelement auf Keramikrohren). Spannung 3x400 VAC. Unabhängiges schaltschrank kann auf der Mauer befestigt sein. Thermoelement außerhalb des Tiegels. Regulierung: PID Axron Swiss. CE Zertifizierung und Bedienungsanleitung in Deutsch. Geliefert Mit Lieferung ohne Tiegel, kundenspezifische Herstellung.
Four à bain de sel 1000°C
Four à bain de sel pour trempe jusqu'à 1000°C. Accès au creuset par le dessus, fermeture manuelle du couvercle. Isolation multicouche. Intérieur en fibre céramique et brique réfractaire. Résistances électriques boudinées tout autour du creuset. Maintien des résistances sur tubes céramiques. Tension 3x400 VAC, fréquence 50 Hz. Boîtier électrique indépendant à fixer. Thermocouple à l’extérieur du creuset. Régulateur PID Axron Swiss. Certification CE, notice d’utilisation en français. Livré sans creuset, fabrication sur mesure.
Borel Swiss Hornos de fusión fijo 1200°C
Este documento proporciona especificaciones de hornos fijos para fundición de metales no ferrosos fabricados por SOLO Swiss SA. Los hornos tienen acceso superior al crisol, aislamiento multicapa interior de fibra cerámica y ladrillo refractario, y calefacción por resistencias eléctricas embutidas. Se detallan 8 modelos que varían en volumen interior, capacidad de carga, dimensiones del crisol y potencia requerida.
Borel Swiss Forni fusori statici 1200°C
Forno a crogiolo fisso per la fusione o il mantenimento in fusione di metalli non ferrosi.
More from Borel Swiss (20)
Kit completi sistema gas infiammabile per forni a pozzo
Kit completi sistema gas infiammabile per forni a pozzo
Recently uploaded
June Patch Tuesday
Ivanti’s Patch Tuesday breakdown goes beyond patching your applications and brings you the intelligence and guidance needed to prioritize where to focus your attention first. Catch early analysis on our Ivanti blog, then join industry expert Chris Goettl for the Patch Tuesday Webinar Event. There we’ll do a deep dive into each of the bulletins and give guidance on the risks associated with the newly-identified vulnerabilities.
TrustArc Webinar - 2024 Global Privacy Survey
How does your privacy program stack up against your peers? What challenges are privacy teams tackling and prioritizing in 2024?
In the fifth annual Global Privacy Benchmarks Survey, we asked over 1,800 global privacy professionals and business executives to share their perspectives on the current state of privacy inside and outside of their organizations. This year’s report focused on emerging areas of importance for privacy and compliance professionals, including considerations and implications of Artificial Intelligence (AI) technologies, building brand trust, and different approaches for achieving higher privacy competence scores.
See how organizational priorities and strategic approaches to data security and privacy are evolving around the globe.
This webinar will review:
- The top 10 privacy insights from the fifth annual Global Privacy Benchmarks Survey
- The top challenges for privacy leaders, practitioners, and organizations in 2024
- Key themes to consider in developing and maintaining your privacy program
Columbus Data & Analytics Wednesdays - June 2024
Columbus Data & Analytics Wednesdays, June 2024 with Maria Copot 20
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Predictive maintenance is a proactive approach that anticipates equipment failures before they happen. At the forefront of this innovative strategy is Artificial Intelligence (AI), which brings unprecedented precision and efficiency. AI in predictive maintenance is transforming industries by reducing downtime, minimizing costs, and enhancing productivity.
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Are you ready to revolutionize how you handle data? Join us for a webinar where we’ll bring you up to speed with the latest advancements in Generative AI technology and discover how leveraging FME with tools from giants like Google Gemini, Amazon, and Microsoft OpenAI can supercharge your workflow efficiency.
During the hour, we’ll take you through:
Guest Speaker Segment with Hannah Barrington: Dive into the world of dynamic real estate marketing with Hannah, the Marketing Manager at Workspace Group. Hear firsthand how their team generates engaging descriptions for thousands of office units by integrating diverse data sources—from PDF floorplans to web pages—using FME transformers, like OpenAIVisionConnector and AnthropicVisionConnector. This use case will show you how GenAI can streamline content creation for marketing across the board.
Ollama Use Case: Learn how Scenario Specialist Dmitri Bagh has utilized Ollama within FME to input data, create custom models, and enhance security protocols. This segment will include demos to illustrate the full capabilities of FME in AI-driven processes.
Custom AI Models: Discover how to leverage FME to build personalized AI models using your data. Whether it’s populating a model with local data for added security or integrating public AI tools, find out how FME facilitates a versatile and secure approach to AI.
We’ll wrap up with a live Q&A session where you can engage with our experts on your specific use cases, and learn more about optimizing your data workflows with AI.
This webinar is ideal for professionals seeking to harness the power of AI within their data management systems while ensuring high levels of customization and security. Whether you're a novice or an expert, gain actionable insights and strategies to elevate your data processes. Join us to see how FME and AI can revolutionize how you work with data!
Taking AI to the Next Level in Manufacturing.pdf
Read Taking AI to the Next Level in Manufacturing to gain insights on AI adoption in the manufacturing industry, such as:
1. How quickly AI is being implemented in manufacturing.
2. Which barriers stand in the way of AI adoption.
3. How data quality and governance form the backbone of AI.
4. Organizational processes and structures that may inhibit effective AI adoption.
6. Ideas and approaches to help build your organization's AI strategy.
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift
Overview
Dive into the world of anomaly detection on edge devices with our comprehensive hands-on tutorial. This SlideShare presentation will guide you through the entire process, from data collection and model training to edge deployment and real-time monitoring. Perfect for those looking to implement robust anomaly detection systems on resource-constrained IoT/edge devices.
Key Topics Covered
1. Introduction to Anomaly Detection
- Understand the fundamentals of anomaly detection and its importance in identifying unusual behavior or failures in systems.
2. Understanding Edge (IoT)
- Learn about edge computing and IoT, and how they enable real-time data processing and decision-making at the source.
3. What is ArgoCD?
- Discover ArgoCD, a declarative, GitOps continuous delivery tool for Kubernetes, and its role in deploying applications on edge devices.
4. Deployment Using ArgoCD for Edge Devices
- Step-by-step guide on deploying anomaly detection models on edge devices using ArgoCD.
5. Introduction to Apache Kafka and S3
- Explore Apache Kafka for real-time data streaming and Amazon S3 for scalable storage solutions.
6. Viewing Kafka Messages in the Data Lake
- Learn how to view and analyze Kafka messages stored in a data lake for better insights.
7. What is Prometheus?
- Get to know Prometheus, an open-source monitoring and alerting toolkit, and its application in monitoring edge devices.
8. Monitoring Application Metrics with Prometheus
- Detailed instructions on setting up Prometheus to monitor the performance and health of your anomaly detection system.
9. What is Camel K?
- Introduction to Camel K, a lightweight integration framework built on Apache Camel, designed for Kubernetes.
10. Configuring Camel K Integrations for Data Pipelines
- Learn how to configure Camel K for seamless data pipeline integrations in your anomaly detection workflow.
11. What is a Jupyter Notebook?
- Overview of Jupyter Notebooks, an open-source web application for creating and sharing documents with live code, equations, visualizations, and narrative text.
12. Jupyter Notebooks with Code Examples
- Hands-on examples and code snippets in Jupyter Notebooks to help you implement and test anomaly detection models.
HCL Notes and Domino License Cost Reduction in the World of DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-and-domino-license-cost-reduction-in-the-world-of-dlau/
The introduction of DLAU and the CCB & CCX licensing model caused quite a stir in the HCL community. As a Notes and Domino customer, you may have faced challenges with unexpected user counts and license costs. You probably have questions on how this new licensing approach works and how to benefit from it. Most importantly, you likely have budget constraints and want to save money where possible. Don’t worry, we can help with all of this!
We’ll show you how to fix common misconfigurations that cause higher-than-expected user counts, and how to identify accounts which you can deactivate to save money. There are also frequent patterns that can cause unnecessary cost, like using a person document instead of a mail-in for shared mailboxes. We’ll provide examples and solutions for those as well. And naturally we’ll explain the new licensing model.
Join HCL Ambassador Marc Thomas in this webinar with a special guest appearance from Franz Walder. It will give you the tools and know-how to stay on top of what is going on with Domino licensing. You will be able lower your cost through an optimized configuration and keep it low going forward.
These topics will be covered
- Reducing license cost by finding and fixing misconfigurations and superfluous accounts
- How do CCB and CCX licenses really work?
- Understanding the DLAU tool and how to best utilize it
- Tips for common problem areas, like team mailboxes, functional/test users, etc
- Practical examples and best practices to implement right away
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
This case study explores designing a scalable e-commerce platform, covering key requirements, system components, and best practices.
Building Production Ready Search Pipelines with Spark and Milvus
Spark is the widely used ETL tool for processing, indexing and ingesting data to serving stack for search. Milvus is the production-ready open-source vector database. In this talk we will show how to use Spark to process unstructured data to extract vector representations, and push the vectors to Milvus vector database for search serving.
Introduction of Cybersecurity with OSS at Code Europe 2024
I develop the Ruby programming language, RubyGems, and Bundler, which are package managers for Ruby. Today, I will introduce how to enhance the security of your application using open-source software (OSS) examples from Ruby and RubyGems.
The first topic is CVE (Common Vulnerabilities and Exposures). I have published CVEs many times. But what exactly is a CVE? I'll provide a basic understanding of CVEs and explain how to detect and handle vulnerabilities in OSS.
Next, let's discuss package managers. Package managers play a critical role in the OSS ecosystem. I'll explain how to manage library dependencies in your application.
I'll share insights into how the Ruby and RubyGems core team works to keep our ecosystem safe. By the end of this talk, you'll have a better understanding of how to safeguard your code.
A Comprehensive Guide to DeFi Development Services in 2024
DeFi represents a paradigm shift in the financial industry. Instead of relying on traditional, centralized institutions like banks, DeFi leverages blockchain technology to create a decentralized network of financial services. This means that financial transactions can occur directly between parties, without intermediaries, using smart contracts on platforms like Ethereum.
In 2024, we are witnessing an explosion of new DeFi projects and protocols, each pushing the boundaries of what’s possible in finance.
In summary, DeFi in 2024 is not just a trend; it’s a revolution that democratizes finance, enhances security and transparency, and fosters continuous innovation. As we proceed through this presentation, we'll explore the various components and services of DeFi in detail, shedding light on how they are transforming the financial landscape.
At Intelisync, we specialize in providing comprehensive DeFi development services tailored to meet the unique needs of our clients. From smart contract development to dApp creation and security audits, we ensure that your DeFi project is built with innovation, security, and scalability in mind. Trust Intelisync to guide you through the intricate landscape of decentralized finance and unlock the full potential of blockchain technology.
Ready to take your DeFi project to the next level? Partner with Intelisync for expert DeFi development services today!
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Discover how MongoDB Atlas and vector search technology can revolutionize your application's search capabilities. This comprehensive presentation covers:
* What is Vector Search?
* Importance and benefits of vector search
* Practical use cases across various industries
* Step-by-step implementation guide
* Live demos with code snippets
* Enhancing LLM capabilities with vector search
* Best practices and optimization strategies
Perfect for developers, AI enthusiasts, and tech leaders. Learn how to leverage MongoDB Atlas to deliver highly relevant, context-aware search results, transforming your data retrieval process. Stay ahead in tech innovation and maximize the potential of your applications.
#MongoDB #VectorSearch #AI #SemanticSearch #TechInnovation #DataScience #LLM #MachineLearning #SearchTechnology
Operating System Used by Users in day-to-day life.pptx
Dive into the realm of operating systems (OS) with Pravash Chandra Das, a seasoned Digital Forensic Analyst, as your guide. 🚀 This comprehensive presentation illuminates the core concepts, types, and evolution of OS, essential for understanding modern computing landscapes.
Beginning with the foundational definition, Das clarifies the pivotal role of OS as system software orchestrating hardware resources, software applications, and user interactions. Through succinct descriptions, he delineates the diverse types of OS, from single-user, single-task environments like early MS-DOS iterations, to multi-user, multi-tasking systems exemplified by modern Linux distributions.
Crucial components like the kernel and shell are dissected, highlighting their indispensable functions in resource management and user interface interaction. Das elucidates how the kernel acts as the central nervous system, orchestrating process scheduling, memory allocation, and device management. Meanwhile, the shell serves as the gateway for user commands, bridging the gap between human input and machine execution. 💻
The narrative then shifts to a captivating exploration of prominent desktop OSs, Windows, macOS, and Linux. Windows, with its globally ubiquitous presence and user-friendly interface, emerges as a cornerstone in personal computing history. macOS, lauded for its sleek design and seamless integration with Apple's ecosystem, stands as a beacon of stability and creativity. Linux, an open-source marvel, offers unparalleled flexibility and security, revolutionizing the computing landscape. 🖥️
Moving to the realm of mobile devices, Das unravels the dominance of Android and iOS. Android's open-source ethos fosters a vibrant ecosystem of customization and innovation, while iOS boasts a seamless user experience and robust security infrastructure. Meanwhile, discontinued platforms like Symbian and Palm OS evoke nostalgia for their pioneering roles in the smartphone revolution.
The journey concludes with a reflection on the ever-evolving landscape of OS, underscored by the emergence of real-time operating systems (RTOS) and the persistent quest for innovation and efficiency. As technology continues to shape our world, understanding the foundations and evolution of operating systems remains paramount. Join Pravash Chandra Das on this illuminating journey through the heart of computing. 🌟
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Webinar Recording: https://www.panagenda.com/webinars/hcl-notes-und-domino-lizenzkostenreduzierung-in-der-welt-von-dlau/
DLAU und die Lizenzen nach dem CCB- und CCX-Modell sind für viele in der HCL-Community seit letztem Jahr ein heißes Thema. Als Notes- oder Domino-Kunde haben Sie vielleicht mit unerwartet hohen Benutzerzahlen und Lizenzgebühren zu kämpfen. Sie fragen sich vielleicht, wie diese neue Art der Lizenzierung funktioniert und welchen Nutzen sie Ihnen bringt. Vor allem wollen Sie sicherlich Ihr Budget einhalten und Kosten sparen, wo immer möglich. Das verstehen wir und wir möchten Ihnen dabei helfen!
Wir erklären Ihnen, wie Sie häufige Konfigurationsprobleme lösen können, die dazu führen können, dass mehr Benutzer gezählt werden als nötig, und wie Sie überflüssige oder ungenutzte Konten identifizieren und entfernen können, um Geld zu sparen. Es gibt auch einige Ansätze, die zu unnötigen Ausgaben führen können, z. B. wenn ein Personendokument anstelle eines Mail-Ins für geteilte Mailboxen verwendet wird. Wir zeigen Ihnen solche Fälle und deren Lösungen. Und natürlich erklären wir Ihnen das neue Lizenzmodell.
Nehmen Sie an diesem Webinar teil, bei dem HCL-Ambassador Marc Thomas und Gastredner Franz Walder Ihnen diese neue Welt näherbringen. Es vermittelt Ihnen die Tools und das Know-how, um den Überblick zu bewahren. Sie werden in der Lage sein, Ihre Kosten durch eine optimierte Domino-Konfiguration zu reduzieren und auch in Zukunft gering zu halten.
Diese Themen werden behandelt
- Reduzierung der Lizenzkosten durch Auffinden und Beheben von Fehlkonfigurationen und überflüssigen Konten
- Wie funktionieren CCB- und CCX-Lizenzen wirklich?
- Verstehen des DLAU-Tools und wie man es am besten nutzt
- Tipps für häufige Problembereiche, wie z. B. Team-Postfächer, Funktions-/Testbenutzer usw.
- Praxisbeispiele und Best Practices zum sofortigen Umsetzen
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Recently uploaded (20)
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
Overcoming the PLG Trap: Lessons from Canva's Head of Sales & Head of EMEA Da...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
leewayhertz.com-AI in predictive maintenance Use cases technologies benefits ...
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Driving Business Innovation: Latest Generative AI Advancements & Success Story
Monitoring and Managing Anomaly Detection on OpenShift.pdf
Monitoring and Managing Anomaly Detection on OpenShift.pdf
HCL Notes and Domino License Cost Reduction in the World of DLAU
HCL Notes and Domino License Cost Reduction in the World of DLAU
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
System Design Case Study: Building a Scalable E-Commerce Platform - Hiike
Building Production Ready Search Pipelines with Spark and Milvus
Building Production Ready Search Pipelines with Spark and Milvus
Introduction of Cybersecurity with OSS at Code Europe 2024
Introduction of Cybersecurity with OSS at Code Europe 2024
A Comprehensive Guide to DeFi Development Services in 2024
A Comprehensive Guide to DeFi Development Services in 2024
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Unlock the Future of Search with MongoDB Atlas_ Vector Search Unleashed.pdf
Operating System Used by Users in day-to-day life.pptx
Operating System Used by Users in day-to-day life.pptx
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
Deep Dive: Getting Funded with Jason Jason Lemkin Founder & CEO @ SaaStr
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
HCL Notes und Domino Lizenzkostenreduzierung in der Welt von DLAU
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Energy Efficient Video Encoding for Cloud and Edge Computing Instances
Borel Swiss Glass furnace 1000°C
- 1. Standard Furnaces & Ovens since 1918 St d d F & O SOLO Swiss SA Grandes-Vies 25, 2900 Porrentruy, Switzerland - Tel. +41 (0)32 756 64 00 - borel@soloswiss.com - www.borelswiss.com Specifications subject to change * V 28.01.2022 GLASS FURNACES 1000°C FF 1000 Definition: Electric furnace for glass work. Construction: Robustly built in folded sheet steel. Bell furnace has opening assisted by hydraulic cylinders. Insulation: Multilayer insulation. Interior in ceramic fibre and refractory bricks. Aeration: Exhaust vent on top. Heating: Spiral wound resistors on the roof of the furnace. Electricity: Voltage 230 VAC, up to 10 kW and voltage 3x400 VAC from 10 kW, 50 Hz. Regulation: Axron Swiss PID temperature controller. Documentation: CE marking and operating instructions in English. MODEL ITEM CODE Int. Vol. (L) Int. Dim. (WxHxD) (mm) Power (kW) FF 1000-100 N16316 100 500 x 400 x 500 8 FF 1000-140 N16318 140 700 x 400 x 500 10 FF 1000-180 N16319 180 900 x 400 x 500 10 FF 1000-260 N16320 260 1100 x 400 x 600 12 FF 1000-340 N16321 340 1200 x 400 x 700 15 FF 1000-420 N16322 420 1500 x 400 x 700 18 FF 1000-480 N16323 480 2000 x 400 x 600 18 FF 1000-560 N16324 560 2000 x 400 x 700 22 Photos for illustration purposes only