This document summarizes the services of Dickinson Enterprises, an interior/exterior residential/commercial coatings company. They specialize in garage floor coatings and describe a 7-step process involving cleaning, acid etching, rinsing, neutralizing, drying, applying epoxy and flake. The cost is typically $2-3 per square foot for a two car garage, or around $1,100. The company promises high quality work and a 5-year warranty.

1. We are a Interior/Exterior
Residential/Commercial coatings company;
ROC #189166
We go Statewide on larger projects; Globe,
Winslow, Flagstaff, Tucson and Phoenix metro
valley

2.  We currently work with the following property
managers; PDS, AAM, BPI, Colby, Preferred
community management, Red Mountain
Management
 We have an A+ Rating with the BBB
 No bad marks with the ROC
 I Have a list of Homeowners, HOA Board-
members, and property managers as
references

3.  We specialize in many areas of coatings but
due to time constraints I am going to discuss
Garage floor coatings and the rest of this
presentation will be about Garage floors.
 1) Dirty Floor- We come in with our trusty
floor sander if its too greasy, or oily we will
clean it up with grease rags, soak and dispose.

4.  The pictures in this presentation are of a home
in Glendale that we did last month, the area
was 620 sq. ft. the sanding and pressure
washing took 6 hours, and looking at the floor
you can see why the acid etching is the next
step.

6.  Most of the acid evaporates in the air, however
the next step is to Rinse and Neutralize any
remains of the acid and bring the pH of the
concrete down to 7. We rinse by pressure
washing and we neutralize by a baking soda
water combination. We leave the baking soda
to dry 2-3 hrs. then rinse again. Let dry and test
pH with phenolpthalein if we have a 7 then we
do a dry test.

7.  The dry test consists of taking plastic and
taping it to the ground 2 foot square sheets in a
couple of different areas. The top coat will not
adhere if there is any moisture. If there is no
moisture then we mix the two part epoxy and
start by sealing all the seams first.

9. When applying the flake you want to apply within
5-10 min. of applying the epoxy, walk away and
come back tomorrow. Sweep up any loose flake
check for any areas of discoloration

10.  Once all flake is swept up and any
discoloration is taken care of it’s time to show
off the new floor.

11.  Depending on the Depth of preparation it can
cost 2 to 3 a sq. ft.
 So; two car garage is usually 20 feet wide and
22 feet deep 20x22=440x 2.5=$1,100.00. Would
you like to do it yourself because you just
learned how to do it or would you like to leave
it up to the professionals at Dickinson
Enterprises?

12.  A Preview of coming attractions;

13. I am Mark from Dickinson Enterprises
We are a coating company
that will provide pleasant surprises
With our 7 step process
we know we cant be beat
The Dickinson Difference
is pretty sweet
We give free bids with no money down
We excel in exteriors, interiors and more
I hope this introduction opens the door
Once the relationship is started
I’m only a phone call away
With a five year warranty
We beautify your home and brighten your day
Call 602-214-1138
We will make your project look great
602-214-1138
Your home will look great