This document provides an overview of the basics of remote sensing. It defines remote sensing as acquiring information about an object without direct contact. It discusses key components of the remote sensing process including data acquisition, the electromagnetic spectrum, atmospheric interactions, spectral signatures, and satellite platforms and orbits. Remote sensing draws from many areas and plays an important role in monitoring the Earth through satellite imagery.

1. Basic’s of Remote Sensing
Praveen Vishwakarma
Diploma in Remote Sensing &
Geoinformatics
Dept. of Remote Sensing & Geoinformatics
MDS University, Ajmer
Submitted to:: Dr. Sarvesh Palriya
H.O.D. Remote Sensing Dept.

2. Definitions
Remote Sensing can be defined as the acquisition and recording of information about an
object without being indirect contact with that object.
Remote Sensing, process of obtaining information about land, water, or an object without
any physical contact between the sensor and the subject of analysis.
Remote Sensing is an extensive science, drawing from many areas for support and
development. It depends greatly on the support of governments and private industries
worldwide. Satellite and digital imagery play an important role in remote sensing;
providing information about the land studied
The benefits of remote sensing continue to arise. It can be used to access hard to
reach areas for fieldwork, and provides a more detailed, permanent and objective
survey that offers a different perspective. Air photos are still favored and easily
accessible sources of information for classification

3. Remote Sensing means acquiring information about a phenomena
, object or surface while at a distance from it. This name is
attributed to recent technology in which Satellite and space craft
are used from collecting information to it.

5. Data Acquisition

6. 1. Energy Source or Illumination – The first requirement for remote sensing is to
have an energy source which illuminates or provides electromagnetic energy to the
target of interest.
2. Radiation and the Atmosphere– As the energy travels from its source to the
target, it will come in contact with and interact with the atmosphere it passes
through. This interaction may take place a second time as the energy travels from
the target to the sensor.
3. Interaction with the Target - Once the energy makes its way to the target
through the atmosphere, it interacts with the target depending on the properties of
both the target and the radiation.
4. Recording of Energy by the Sensor - After the energy has been scattered by, or
emitted from the target, we require a sensor (remote - not in contact with the target)
to collect and record the electromagnetic radiation.
5. Transmission, Reception, and Processing - The energy recorded by the sensor
has to be transmitted, often in electronic form, to a receiving and processing station
where the data are processed into an image (hardcopy and/or digital).

7. Data Analysis
1. Interpretation and Analysis - The processed image is interpreted, visually
and/or digitally or electronically, to extract information about the target which was
illuminated.
2. Application - The final element of the remote sensing process is achieved
when we apply the information we have been able to extract from the imagery
about the target in order to better understand it, reveal some new information, or
assist in solving a particular problem.
These seven elements comprise the remote sensing process from beginning to
end. We will be covering all of these in sequential order

10. Electromagnetic Spectrum

11. Two characteristics of electromagnetic radiation are particularly important
for understanding remote sensing. These are the wavelength and frequency.

16. Interaction with THE Atmosphere
Before radiation used for remote sensing reaches the Earth's surface it has to travel through
some distance of the Earth's atmosphere. Particles and gases in the atmosphere can affect
the incoming light and radiation. These effects are caused by the mechanisms of scattering
and absorption.
Scattering occurs when particles or large gas molecules present in the atmosphere interact
with and cause the electromagnetic radiation to be redirected from its original path. How
much scattering takes place depends on several factors including the wavelength of the
radiation, the abundance of particles or gases, and the distance the radiation travels through
the atmosphere. There are three (3) types of scattering which take place.

17. Scattering
Atmospheric scattering is accomplished through absorption and re-emission of
radiation by atoms or molecules.
Rayleigh scattering : occurs when particles are very small compared to
the wavelength of the radiation. These could be particles such as small specks of
dust or nitrogen and oxygen molecules. Rayleigh scattering causes shorter
wavelengths of energy to be scattered much more than longer wavelengths.
Rayleigh scattering is the dominant scattering mechanism in the upper atmosphere.
The fact that the sky appears "blue" during the day is because of this phenomenon.
Mie scattering :occurs when the particles are just about the same size as the
wavelength of the radiation. Dust, pollen, smoke and water vapor are common
causes of Mie scattering which tends to affect longer wavelengths than those
affected by Rayleigh scattering.
Non-selective scattering: This occurs when the particles are much larger
than the wavelength of the radiation. Water droplets and large dust particles can
cause this type of scattering. Nonselective scattering gets its name from the fact
that all wavelengths are scattered about equally.

19. Absorption
Absorption is the process by which radiant energy is absorbed and converted into
other forms of energy. An absorption band is a range of wavelengths (or
frequencies) in the electromagnetic spectrum within which radiant energy is
absorbed by substances such as water carbon dioxide (CO2), oxygen (O2), ozone
(O3), and nitrous oxide (N2O).
Ozone, carbon dioxide, and water vapor are the three main atmospheric
constituents which absorb radiation.
Ozone : Ozone serves to absorb the harmful (to most living things) ultraviolet
radiation from the sun. Without this protective layer in the atmosphere our skin
would burn when exposed to sunlight.
carbon dioxide: Carbon dioxide referred to as a greenhouse gas. This is because it tends
to absorb radiation strongly in the far infrared portion of the spectrum - that area
associated with thermal heating – which serves to trap this heat inside the atmosphere.
Water vapor: Water vapor in the atmosphere absorbs much of the incoming long wave
infrared and shortwave microwave radiation (between 22 m and 1 m ). The presence
of water vapor in the lower atmosphere varies greatly from location to location and at
different times of the year. For example, the air mass above a desert would have very
little water vapor to absorb energy, while the tropics would have high concentrations of
water vapor.

21. Atmospheric Windows
In the spectrum we can "look" for remote sensing purposes. Those areas of the spectrum which are
not severely influenced by atmospheric absorption and thus, are useful to remote sensors, are
called atmospheric windows. we can define those wavelengths that we cause most effectively for
remote sensing. The visible portion of the spectrum, to which our eyes are most sensitive, corresponds
to both an atmospheric window and the peak energy level of the sun. Note also that heat energy
emitted by the Earth corresponds to a window around 10 μm in the thermal IR portion of the spectrum,
while the large window at wavelengths beyond 1 mm is associated with the Now that we understand
how electromagnetic energy makes its journey from its source to the surface (and it is a difficult
journey, as you can see) we will next examine what happens to that radiation when it does arrive at the
Earth's surface.

22. Major Atmospheric Windows

23. Spectral Signature
Any Remotely sensed parameter , which directly or indirectly characterizes the
nature and or condition of the object under observation , as defined as t spectral
signature.

28. Platform & orbits
Two Satellite orbits are important for Remote sensing observation of the earth :
1.Geo-stationary orbit 2.Sunsynchronous - polar orbit
1.Geo-stationary Orbit : The Geo-Stationary orbit is such a position for a satellite that it keeps
place of with the rotation of earth. These Platform are covering the same place and give
continues near hemispheric coverage over the same area day and night. These
Geostationary Satellite , at altitudes of approximately 36,000 km. revolve at speeds which
match the rotations of the earth so they seem stationary , relative to the earth’s surface. This
allows the Satellites to observe and collect information continuously over specific areas.
These are the main used for communications and metrological application.

29. Polar orbit :The second important Remote sensing orbit is Polar orbit. Satellite in a
polar orbit cycle from north pole to south pole . The polar orbit have an inclination