1. The activity of AWAJI began in 1944 and has always been committed to its
Products quality & it’s manufacturing range and markets, to develop new
technologies and to facilitate the highest standards in Industry.
Today AWAJI., consisting of two manufacturing divisions one in its head
quarters Japan & the other one in Thailand, produces more than 24,000
tons per year.
Our Main Office and factory is the production base of the threaded
connection processing section in Japan, as well as the distribution system
for Butt welding fittings for mainly for Japan market, such as Sumoto
Distribution Center & Tokyo Distribution center. Our Butt-Weld Fittings
Plant is situated in Thailand, which offcourse support all our global end-
users. Our plant in Thailand runs under the strict quality parameters with
complete Japanese personnel supervision & controls.
The Company manufactures a large variety of butt-welding fittings in
accordance with all international standards and codes and the most
stringent customer requirements. Our products can be currently supplied
in all Carbon Steel / Low Temp CS & Stainless Steel Grades & our future
plans are in all other exotic alloys.
Every manufacturing phase, from cutting to forming, from machining to
testing, is carried out with a vast array of modern equipment and
machinery. Each fitting is controlled through all the manufacturing phases
thanks to rigorous QA & QC procedures and internal chemical and
mechanical laboratories well equipped to perform both destructive and
non-destructive examinations.
The mission of AWAJI is to provide the best Customer service by supplying
fittings with the most up-to-date technology, respecting the agreed
delivery date, monitoring the progress of the work and satisfying urgent
requirements. Our immediate objective is to radically enhance the
presence of the Awaji Brand name in the marketplace and to reflect
heavily upon not only our renowned competitiveness but also the quality
we build into each and every one of our products. Our second
undertaking is to dramatically highlight the dedication we have to in
developing new products that utilize advanced new technology.
Main Office & Factory
Factory in Thailand
2.
3. AWAJI Moved its Plant from Japan to
Thailand due to economic reasons in 1987
6. Production Range – Carbon Steel
CARBON STEEL SEAMLESS BUTT WELDING FITTINGS
Long Radius 90° and 45° Elbows up to 24”
Long Radius 180° Elbows up to 8”
Short Radius 90° Elbows up to 24”
Short Radius 180° Elbows up to 14”
Straight Tee pieces up to 16”
Reducing Tee pieces up to 16”
Concentric Reducers up to 24”
Eccentric Reducers up to 16”
Caps up to 12”
Wall thickness: all Schedules in accordance with ASME B 36.10
7. Policy on Safety of Occupational Health and
Working Environment
AWAJI MATERIA (THAILAND) CO., LTD.
81 Moo 4, PRAKASA ROAD, T. BANGMUANG, A. MUANG, SAMUTPRAKARN 10270 THAILAND
Tel : (662) 701-5226 Fax : (662) 387-0340
Policy on Safety of Occupational Health and Working Environment
Awaji Materia (Thailand) Co. Ltd., has realized the importance of responsible Environment, Health & Safety management. It affects our
growth and long term success. Our company values Social Responsibility and we are committed to meeting high standards set by the
company for protecting the health and safety of our employees, the environment and on the communities where we do business.
Therefore, Awaji has formulated the following policy :
Safety and maintaining a good working environment : It is the duty of all employees to cooperate and recognize safety of life and property.
Awaji will train all employees to instill safety habits and to perform their duties safely and remain healthy.
Awaji will monitor working conditions to prevent accidents by workers to others and to themselves.
Awaji shall support and enhance improvements to safe working and healthy conditions.
It is the duty of Supervisory staff to take responsibility on safety of occupational health and working environment of subordinates and adhere
to Safety rules and regulations .
Awaji shall support and train staff with regards to OHS to create a safe working environment for all.
Awaji shall follow up and evaluate the safety policy on occupational health and working environment from time to time in order to make all
aware of the importance of working safely. It will also ensure that safety regulations are followed and all are aware of the company’s common
goal on zero injuries.
8. ENVIRONMENT, HEALTH AND SAFETY POLICY
STATEMENT
Protecting the health and safety of our employees, our customers, and the natural environment is a core value within Awaji
Materia(Thailand) Co. Ltd.. We will not be satisfied until our workplaces are safe from hazards, our employees are injury free,
our services and products are safe, and our commitment and record in regulatory compliance and protection of the
environment are unmatched
WE DECLARE TO :
Identify and manage the environmental, health and safety risks and impacts of our existing and planned operations.
Set objectives and targets that result in continuous improvement of our environmental, health and safety performance.
Provide the leadership and resources that will enable our workforce to meet improvement objectives and targets.
Require every employee to take responsibility towards meeting environmental, health and safety objectives.
Include environmental, health and safety performance when evaluating managers, employees and contractors for
compensation, rewards, and recognition.
Comply with applicable environmental, health and safety laws and regulations.
Recognize that no task is so important that it be performed at the risk of health and safety.
Provide internal standards for our managers and employees where controlling laws and regulations do not exist or are
considered insufficient.
Communicate regularly with the communities where we operate to develop and maintain a mutual understanding of goals and
expectations.
Promote the conservation of energy and natural resources and reduce waste.
Routinely monitor, assess and report on the company’s environmental, health and safety performance and on our conformity
with this policy.
Mr. Takahiko Mio,
President
9. Energy and Utilities
Nuclear power plants, Thermal power stations, Gas supply conduits, Water pipe systems
Key Industries
Petroleum Refineries, Steel and Paper mills
Shipbuilding Industry
Large-Sized (VLCC) Oil Tankers, LNG Tankers
IT Industry
Semi-conductor Manufacturing Factories, Liquid Crystal Panel Manufacturing.
Hygiene Industry
Hospitals & Pharmaceutical Factories
Food Industry
Breweries, Soda Manufacturing and Food Distribution centers.
Environmental Facilities
Garbage Incineration , Drainage Treatment Facilities, PCB Processing Institutions
Buildings
Sprinklers for HVAC cooling & heating systems and disaster prevention etc. for shopping centers and skyscrapers.
Tunnel Construction
"AGF processing steel tubes" are used to reinforce the ground in public works projects.
OCTG
Threaded Joint for OCTG Pipe
Ground Reinforcement
Micro-Pile Pipe.
12. COUPLING FOR OIL WELL
An Oil or Gas well is not complete until the Tubular Products are in place. The Tubular Products are the foundation of
any well. OCTG Tubulars are made from High Grade Steel or Alloy. They must contain the collapse forces of the earth
and also provide the path to recover Oil and Gas reserves. They must resist high pressure, corrosion, erosion, hostel
fluids and gases and endure high temperatures. They must perform without failure for many years and be assembled
with the highest integrity. The connections are machined with close tolerances and must perform under the highest
loads. They must be serviceable on land and under the sea. The modern Oil and Gas wells have specific requirements
for size and grade and the modern Pipe Mills are aligned with these needs.
