4_3_17224_1474491606_Advantage Training Eric Conley
•
1 like•51 views
Medical devices must meet quality standards to ensure safety and effectiveness. Manufacturers have quality management systems to maintain and improve products. Regulatory bodies audit manufacturers to confirm compliance with requirements through all stages of the product lifecycle.
Report
Share
Report
Share
Download to read offline
Recommended
GE Healthcare_UHCW Opera Case Study_FINALv2
The Centricity Opera system implemented at University Hospitals Coventry and Warwickshire NHS Trust (UHCW) has led to improved operating theatre efficiency and significant financial savings. It allows monitoring of 32 operating theatres in real-time, helping to reduce unused theatre time and save over £3/4 million per year. The system also supports full traceability of materials, resulting in additional annual revenue of over £1 million. UHCW has achieved a 96% utilization rate of elective theatre capacity through improved scheduling and cancellation reductions enabled by the Centricity Opera system.
Satisfying us and eu human factors requirements for inhaler devices
HFE is an essential and integral part of the inhaler device development process. The process requirements are primarily based on the core principles of safety and effectiveness. The HFE processes for the FDA and EU submissions are largely harmonized, but there are some minor differences. It is important that manufacturers of inhaler devices understand the process clearly so that they can comply with the requirements. Following the HFE process does not only fulfil the regulatory requirements but also helps you to develop better products. This presentation provides the holistic view of the HFE process in a simple schematic way, however every project is different and the process should be tailored accordingly.
Center for the Future of Surgery Intake Process Problem
The Center for the Future of Surgery (CFS) at the University of California, San Diego is losing money due to inefficiencies in their scheduling and intake processes. They currently use Microsoft Office applications like Word, Excel, and Outlook for scheduling, which are not well-suited for medical scheduling. A custom-built software solution using a MySQL database is recommended to allow for online scheduling, appointment histories, and alerts for schedule changes. This new system would save the CFS approximately $206,000 per year in cancellations and labor costs while only requiring one scheduling liaison instead of two. The upfront cost of the new system is around $45,000. The new system would improve customer and employee satisfaction
Still image analysis camerawork
1) The trailer begins with an establishing shot of a dark, spooky mansion to set the mysterious scene and show where most of the film will take place, typical of thriller and horror genres.
2) Two master shots inside the mansion effectively show the dimensions of a room to maintain suspense as it is very dark.
3) A close-up shot shows a young lady's confused and vulnerable expression, creating stereotypes that she will be an easy target for danger, using facial expressions that follow thriller genre conventions.
Presentation_NEW.PPTX
This one sentence document does not provide enough context or information to create an accurate 3 sentence summary. The document contains only one word - "Lorem" - which is not meaningful on its own.
1111.1A
The document provides a summary of news stories from a local newspaper, including:
1) The Sierra Club is proposing an ordinance to limit plastic bag use in stores to reduce waste and pollution.
2) The Voluntary Action Center annual holiday program helped over 1,100 families last year but 50 went without sponsors.
3) A photo caption on Sunday misidentified the Reverend Dr. Clanton C.W. Dawson Jr. who attended a vigil for Michael Brown.
4) The weather forecast and other standard newspaper sections like sports, opinion, and classifieds are also included.
Steven uculmana
La Unión Europea ha propuesto un nuevo paquete de sanciones contra Rusia que incluye un embargo al petróleo. El embargo prohibiría las importaciones de petróleo ruso por mar y limitaría las importaciones por oleoducto. Sin embargo, Hungría, Eslovaquia y la República Checa se oponen al embargo al petróleo, ya que dependen en gran medida de las importaciones rusas.
Recommended
GE Healthcare_UHCW Opera Case Study_FINALv2
The Centricity Opera system implemented at University Hospitals Coventry and Warwickshire NHS Trust (UHCW) has led to improved operating theatre efficiency and significant financial savings. It allows monitoring of 32 operating theatres in real-time, helping to reduce unused theatre time and save over £3/4 million per year. The system also supports full traceability of materials, resulting in additional annual revenue of over £1 million. UHCW has achieved a 96% utilization rate of elective theatre capacity through improved scheduling and cancellation reductions enabled by the Centricity Opera system.
Satisfying us and eu human factors requirements for inhaler devices
HFE is an essential and integral part of the inhaler device development process. The process requirements are primarily based on the core principles of safety and effectiveness. The HFE processes for the FDA and EU submissions are largely harmonized, but there are some minor differences. It is important that manufacturers of inhaler devices understand the process clearly so that they can comply with the requirements. Following the HFE process does not only fulfil the regulatory requirements but also helps you to develop better products. This presentation provides the holistic view of the HFE process in a simple schematic way, however every project is different and the process should be tailored accordingly.
Center for the Future of Surgery Intake Process Problem
The Center for the Future of Surgery (CFS) at the University of California, San Diego is losing money due to inefficiencies in their scheduling and intake processes. They currently use Microsoft Office applications like Word, Excel, and Outlook for scheduling, which are not well-suited for medical scheduling. A custom-built software solution using a MySQL database is recommended to allow for online scheduling, appointment histories, and alerts for schedule changes. This new system would save the CFS approximately $206,000 per year in cancellations and labor costs while only requiring one scheduling liaison instead of two. The upfront cost of the new system is around $45,000. The new system would improve customer and employee satisfaction
Still image analysis camerawork
1) The trailer begins with an establishing shot of a dark, spooky mansion to set the mysterious scene and show where most of the film will take place, typical of thriller and horror genres.
2) Two master shots inside the mansion effectively show the dimensions of a room to maintain suspense as it is very dark.
3) A close-up shot shows a young lady's confused and vulnerable expression, creating stereotypes that she will be an easy target for danger, using facial expressions that follow thriller genre conventions.
Presentation_NEW.PPTX
This one sentence document does not provide enough context or information to create an accurate 3 sentence summary. The document contains only one word - "Lorem" - which is not meaningful on its own.
1111.1A
The document provides a summary of news stories from a local newspaper, including:
1) The Sierra Club is proposing an ordinance to limit plastic bag use in stores to reduce waste and pollution.
2) The Voluntary Action Center annual holiday program helped over 1,100 families last year but 50 went without sponsors.
3) A photo caption on Sunday misidentified the Reverend Dr. Clanton C.W. Dawson Jr. who attended a vigil for Michael Brown.
4) The weather forecast and other standard newspaper sections like sports, opinion, and classifieds are also included.
Steven uculmana
La Unión Europea ha propuesto un nuevo paquete de sanciones contra Rusia que incluye un embargo al petróleo. El embargo prohibiría las importaciones de petróleo ruso por mar y limitaría las importaciones por oleoducto. Sin embargo, Hungría, Eslovaquia y la República Checa se oponen al embargo al petróleo, ya que dependen en gran medida de las importaciones rusas.
concept of kappari by dr. rohini ayengar
Kappari Kishan is a contemporary artist from Telangana, India who introduces novel representations of images focusing on the region. While the main subjects remain women and girls, he also incorporates images of Buddha to transcend regional concerns. His paintings often show large human forms in the foreground with an elaborated storyboard in the background. One work depicts an important Telangana ritual called "Batukamma" where women make floral arrangements and dance around them, usually facing away from spectators. Kishan's works often show women facing away as well. He also paints frontal views of women, such as in "Snehitulu" depicting a conversation between friends set in a rural context. Images of Buddha appear in
Experimental N°1: ESTUDIO DE ACEROS ESTRUCTURALES Y DE CONSTRUCCIÓN SOLDADOS ...
1. Introducción
La soldadura de aleaciones ferrosas y su efecto en las transformaciones y cambio de propiedades son temas muy importantes para el ingeniero metalúrgico. En las empresas existe un sin número de aplicaciones donde se fabrica y/o se reparan estructuras. Es de vital importancia tener un conocimiento sobre este proceso y aplicaciones de aceros estructurales y otros.
Adicionalmente existen otros procesos que son necesarios para la fabricación de elementos estructurales soldados. El dimensionamiento de los componentes o kit de fabricación (que luego se arma y posteriormente debe montarse). El corte se realiza con diferentes procesos tales: oxicorte, corte por plasma bajo agua o normal, corte por agua, corte por láser, otros.
El conformado en frío es importante (cilindrado, plegado, estampado, bombeado, otros) para la geometría, dimensiones y tolerancias. Lo anterior tiene
mucha relación con los protocolos (selección de la soldadura, procesos de corte, procesos de soldadura, terminación superficial, la protección de la superficie, dossier de calidad, aporte térmico, precalentamiento previo, carbono equivalente, velocidad de enfriamiento, distensionado térmico o vibraciones o mecánico, otros).
Se aprecia por tanto que el proceso de corte – conformado – soldadura, conlleva a múltiples disciplinas que debe ser cuidadosamente controladas de manera que las modificaciones de la composición química, propiedades mecánicas, microestructura y otras, sean mínimas en reacción con el material original.
2. Objetivos
Visualizar y estudiar experimentalmente los cambios microestructurales y de propiedades en las distintas zonas de la soldadura (zona ZAT, metal base y aporte). Se usaran aceros estructurales del tipo ASTM A 572, HSL (ASTM A 514 Gr B) y SAE 1045.
El Laboratorio se realiza una parte en las dependencias de la Empresa Kupfer Hnos. (Libertad #58, Metro ULA). Aquí se realizará el proceso de soldadura de las muestras. Adicionalmente se visitarán las dependencias de la Empresa, para visualizar los procesos de Oxicorte y Corte con Plasma. Es importante que los estudiantes posean los siguientes elementos de seguridad: zapatos con punta de acero, casco, ropa gruesa (tipo jeans).
Materiales:
Acero HSL ASTMA514/ASTM A 36
Acero ASTM A-572 Acero SAE 1045
3. Experiencia Laboratorio.
A) Soldadura Aceros ASTM A-572; HSL A514; SAE 1045.
B) Ensayos de doblado.
C) Análisis metalográfico, composición y perfil de dureza.
Los ensayos anteriores permiten determinar en forma precisa el comportamiento de los aceros frente a los procesos de corte y soldadura. Es importante asociar la composición química de c/u (carbono equivalente), la microestructura y la dureza.
Los ensayos de dureza y análisis metalográfico pueden realizarse también en las dependencias de Kupfer Hnos.
4. Bibliografía.
1. Metal Handbook Volumen 6 (Pág. 1065-1098).
2. Fichas y normas de los aceros.
Hawthorn-License
ASCH THOM HAWTHORN is licensed as an individual insurance intermediary agent in Wisconsin through November 30, 2018. Their license allows them to transact business in accident and health as well as life insurance. The license was issued on November 21, 2016 and is subject to applicable laws, regulations, and address/name change notifications to the Office of the Commissioner of Insurance within 30 days.
26_3_17224_1474654836_Advantage Training Eric Conley
This document discusses medical device quality assurance and electrical safety. It focuses on ensuring devices are properly tested to meet electrical safety standards before use on patients. Regular quality assurance checks and safety testing help confirm devices continue functioning as intended without risk of electrical hazards.
More Related Content
Viewers also liked
concept of kappari by dr. rohini ayengar
Kappari Kishan is a contemporary artist from Telangana, India who introduces novel representations of images focusing on the region. While the main subjects remain women and girls, he also incorporates images of Buddha to transcend regional concerns. His paintings often show large human forms in the foreground with an elaborated storyboard in the background. One work depicts an important Telangana ritual called "Batukamma" where women make floral arrangements and dance around them, usually facing away from spectators. Kishan's works often show women facing away as well. He also paints frontal views of women, such as in "Snehitulu" depicting a conversation between friends set in a rural context. Images of Buddha appear in
Experimental N°1: ESTUDIO DE ACEROS ESTRUCTURALES Y DE CONSTRUCCIÓN SOLDADOS ...
1. Introducción
La soldadura de aleaciones ferrosas y su efecto en las transformaciones y cambio de propiedades son temas muy importantes para el ingeniero metalúrgico. En las empresas existe un sin número de aplicaciones donde se fabrica y/o se reparan estructuras. Es de vital importancia tener un conocimiento sobre este proceso y aplicaciones de aceros estructurales y otros.
Adicionalmente existen otros procesos que son necesarios para la fabricación de elementos estructurales soldados. El dimensionamiento de los componentes o kit de fabricación (que luego se arma y posteriormente debe montarse). El corte se realiza con diferentes procesos tales: oxicorte, corte por plasma bajo agua o normal, corte por agua, corte por láser, otros.
El conformado en frío es importante (cilindrado, plegado, estampado, bombeado, otros) para la geometría, dimensiones y tolerancias. Lo anterior tiene
mucha relación con los protocolos (selección de la soldadura, procesos de corte, procesos de soldadura, terminación superficial, la protección de la superficie, dossier de calidad, aporte térmico, precalentamiento previo, carbono equivalente, velocidad de enfriamiento, distensionado térmico o vibraciones o mecánico, otros).
Se aprecia por tanto que el proceso de corte – conformado – soldadura, conlleva a múltiples disciplinas que debe ser cuidadosamente controladas de manera que las modificaciones de la composición química, propiedades mecánicas, microestructura y otras, sean mínimas en reacción con el material original.
2. Objetivos
Visualizar y estudiar experimentalmente los cambios microestructurales y de propiedades en las distintas zonas de la soldadura (zona ZAT, metal base y aporte). Se usaran aceros estructurales del tipo ASTM A 572, HSL (ASTM A 514 Gr B) y SAE 1045.
El Laboratorio se realiza una parte en las dependencias de la Empresa Kupfer Hnos. (Libertad #58, Metro ULA). Aquí se realizará el proceso de soldadura de las muestras. Adicionalmente se visitarán las dependencias de la Empresa, para visualizar los procesos de Oxicorte y Corte con Plasma. Es importante que los estudiantes posean los siguientes elementos de seguridad: zapatos con punta de acero, casco, ropa gruesa (tipo jeans).
Materiales:
Acero HSL ASTMA514/ASTM A 36
Acero ASTM A-572 Acero SAE 1045
3. Experiencia Laboratorio.
A) Soldadura Aceros ASTM A-572; HSL A514; SAE 1045.
B) Ensayos de doblado.
C) Análisis metalográfico, composición y perfil de dureza.
Los ensayos anteriores permiten determinar en forma precisa el comportamiento de los aceros frente a los procesos de corte y soldadura. Es importante asociar la composición química de c/u (carbono equivalente), la microestructura y la dureza.
Los ensayos de dureza y análisis metalográfico pueden realizarse también en las dependencias de Kupfer Hnos.
4. Bibliografía.
1. Metal Handbook Volumen 6 (Pág. 1065-1098).
2. Fichas y normas de los aceros.
Viewers also liked (6)
Experimental N°1: ESTUDIO DE ACEROS ESTRUCTURALES Y DE CONSTRUCCIÓN SOLDADOS ...
Experimental N°1: ESTUDIO DE ACEROS ESTRUCTURALES Y DE CONSTRUCCIÓN SOLDADOS ...
More from Asch Thom Hawthorn
Hawthorn-License
ASCH THOM HAWTHORN is licensed as an individual insurance intermediary agent in Wisconsin through November 30, 2018. Their license allows them to transact business in accident and health as well as life insurance. The license was issued on November 21, 2016 and is subject to applicable laws, regulations, and address/name change notifications to the Office of the Commissioner of Insurance within 30 days.
26_3_17224_1474654836_Advantage Training Eric Conley
This document discusses medical device quality assurance and electrical safety. It focuses on ensuring devices are properly tested to meet electrical safety standards before use on patients. Regular quality assurance checks and safety testing help confirm devices continue functioning as intended without risk of electrical hazards.
More from Asch Thom Hawthorn (10)
26_3_17224_1474654836_Advantage Training Eric Conley
26_3_17224_1474654836_Advantage Training Eric Conley
4_3_17224_1474491606_Advantage Training Eric Conley
- 1. Asch Hawthorn 01-Medical Device Quality Assurance: Introduction 9/21/2016 Powered by TCPDF (www.tcpdf.org)