This 3-page document provides a preservation procedure for mud pumps #1. It details tasks to complete during rig move like adding corrosion inhibitors to mud systems. It then lists preservation tasks for the mechanical, power end, charge pump and other components. Tasks include cleaning, applying corrosion inhibitor fluids and coatings, and wrapping components. The document includes sign-off records, measurement recordings, and suggested Cortec corrosion inhibitor products for protection.
This document provides instructions for removing and installing a turbocharger and exhaust manifold on a 226B2 Skid Steer Loader with a 3024C engine. The turbocharger removal procedure involves loosening hoses, removing bolts and nuts, and removing the turbocharger from the exhaust manifold. The installation procedure specifies cleaning parts and installing in the reverse order while tightening to the specified torques. Similarly, the exhaust manifold removal involves loosening bolts and nuts and removing the manifold and gasket, while installation specifies cleaning, installing a new gasket, and tightening bolts to the specified torques. Safety notices are provided to keep parts clean and contain fluids.
This document provides removal and installation instructions for a turbocharger and exhaust manifold on a Caterpillar 216B2 skid steer loader. The procedure involves removing hoses, bolts, tubes, and gaskets and ensuring all mating surfaces are clean before installing the new parts with new gaskets and bolts, tightened to the specified torques. Valve spring removal and installation procedures are also outlined, requiring the use of special tools to compress the springs safely.
Caterpillar cat 3054 b industrial engine (prefix 5mf) service repair manual (...ujfjjskkekmem
This document provides instructions for removing and installing various fuel system components on a 3054B Industrial Engine, including:
1. Removing and installing the fuel filter base.
2. Removing the fuel transfer pump.
3. Installing the fuel transfer pump.
4. Removing and installing the fuel injection lines.
5. Removing the fuel injection nozzles.
It provides detailed step-by-step instructions and illustrations for each procedure while emphasizing the importance of cleanliness and preventing contamination of fuel system components.
Caterpillar cat 320 d ln excavator (prefix wbn) service repair manual (wbn000...fkjsekksmem
This document provides the procedure for removing and installing inlet and exhaust valve springs on a Caterpillar 320D LN excavator with a C6.4 engine. It describes using special tools to compress the valve springs and rotate the crankshaft to position the piston for safe removal and installation of the springs. Proper cleaning and inspection of parts is emphasized to prevent damage and wear. The process involves removing keepers and other components to access the springs which must be replaced in matched pairs per cylinder.
Caterpillar cat 320 d l excavator (prefix a9f) service repair manual (a9f0000...fjskekfseik
This document provides instructions for removing and installing inlet and exhaust valve springs on a Caterpillar 320D L excavator engine. The removal process involves using specialized tools to compress the valve springs so the valves can be serviced while keeping the piston at top dead center. Installation requires cleaning components, lubricating the valves, and using tools to carefully compress the springs into place. Proper assembly procedure and safety precautions are emphasized to avoid injury from released spring forces.
This document provides instructions for using the 5P-4150 nozzle testing group to test fuel injection nozzles. It describes the components of the tester, installation procedures, and testing procedures for different nozzle types. Safety precautions are outlined, and additional parts needed for specific nozzle tests are listed. Record keeping procedures and calibration requirements are also covered.
This document provides instructions for removing and installing a turbocharger and exhaust manifold on a 226B2 Skid Steer Loader with a 3024C engine. The turbocharger removal procedure involves loosening hoses, removing bolts and nuts, and removing the turbocharger from the exhaust manifold. The installation procedure specifies cleaning parts and installing in the reverse order while tightening to the specified torques. Similarly, the exhaust manifold removal involves loosening bolts and nuts and removing the manifold and gasket, while installation specifies cleaning, installing a new gasket, and tightening bolts to the specified torques. Safety notices are provided to keep parts clean and contain fluids.
This document provides removal and installation instructions for a turbocharger and exhaust manifold on a Caterpillar 216B2 skid steer loader. The procedure involves removing hoses, bolts, tubes, and gaskets and ensuring all mating surfaces are clean before installing the new parts with new gaskets and bolts, tightened to the specified torques. Valve spring removal and installation procedures are also outlined, requiring the use of special tools to compress the springs safely.
Caterpillar cat 3054 b industrial engine (prefix 5mf) service repair manual (...ujfjjskkekmem
This document provides instructions for removing and installing various fuel system components on a 3054B Industrial Engine, including:
1. Removing and installing the fuel filter base.
2. Removing the fuel transfer pump.
3. Installing the fuel transfer pump.
4. Removing and installing the fuel injection lines.
5. Removing the fuel injection nozzles.
It provides detailed step-by-step instructions and illustrations for each procedure while emphasizing the importance of cleanliness and preventing contamination of fuel system components.
Caterpillar cat 320 d ln excavator (prefix wbn) service repair manual (wbn000...fkjsekksmem
This document provides the procedure for removing and installing inlet and exhaust valve springs on a Caterpillar 320D LN excavator with a C6.4 engine. It describes using special tools to compress the valve springs and rotate the crankshaft to position the piston for safe removal and installation of the springs. Proper cleaning and inspection of parts is emphasized to prevent damage and wear. The process involves removing keepers and other components to access the springs which must be replaced in matched pairs per cylinder.
Caterpillar cat 320 d l excavator (prefix a9f) service repair manual (a9f0000...fjskekfseik
This document provides instructions for removing and installing inlet and exhaust valve springs on a Caterpillar 320D L excavator engine. The removal process involves using specialized tools to compress the valve springs so the valves can be serviced while keeping the piston at top dead center. Installation requires cleaning components, lubricating the valves, and using tools to carefully compress the springs into place. Proper assembly procedure and safety precautions are emphasized to avoid injury from released spring forces.
This document provides instructions for using the 5P-4150 nozzle testing group to test fuel injection nozzles. It describes the components of the tester, installation procedures, and testing procedures for different nozzle types. Safety precautions are outlined, and additional parts needed for specific nozzle tests are listed. Record keeping procedures and calibration requirements are also covered.
This document provides information about a high pressure cleaner system from PressureJet, including:
1. Specifications for a PJS 15250 high pressure pump with 250 bar pressure and 15 LPM flow rate.
2. An overview of PressureJet's quality control processes and features compared to other manufacturers.
3. Details on the components, accessories, and options available for customizing a complete high pressure cleaning system.
Caterpillar cat 226 b skid steer loader (prefix mjh) service repair manual (m...ujfdujjskkekmd
This document provides instructions for removing and installing a fuel injection pump on a Caterpillar 226B skid steer loader. The removal process involves:
1) Removing fuel injection lines and disconnecting any flexible fuel return hoses
2) Gradually loosening fasteners to remove the pump from the cylinder block
3) Recording shim thickness for reinstallation
The installation process is the reverse, ensuring the correct shim thickness is used to set fuel injection timing. Proper cleaning and torque specifications are also provided.
Caterpillar cat el240 b excavator (prefix 5wg) service repair manual (5wg0000...ufjjsjekksemmd
The document provides instructions for removing and installing an engine oil cooler on an excavator model EL240B. It describes removing the oil filter base, then removing the oil cooler and its gasket and O-ring seals. For installation, it describes installing new O-ring seals and gasket on the oil cooler before installing it along with the gasket and tightening bolts, then reinstalling the oil filter base.
Caterpillar cat 320 c excavator (prefix bea) service repair manual (bea00001 ...jjdjfkkskemme
This document provides instructions for removing a bucket cylinder from an excavator. It begins by noting the importance of relieving pressure from hydraulic systems before disassembly to prevent injury. The steps include releasing hydraulic pressure, attaching lifting devices, removing retaining bolts and pins, and disconnecting hoses. Identification marks should be made on all lines and components. Cleanliness is important during disassembly and reassembly to prevent contamination of hydraulic systems.
This document provides instructions for removing and installing a turbocharger on a Caterpillar 226B skid steer loader. The removal process involves disconnecting hoses and tubes, removing fasteners, and lifting the turbocharger off the exhaust manifold. Installation is the reverse, cleaning surfaces, replacing gaskets and seals, lubricating bearings, and reconnecting all tubes and hoses. Proper torque values are specified for all fasteners. Inspection of the turbocharger and actuator is also recommended before installation.
This document provides instructions for removing and installing a turbocharger on a Caterpillar 226B skid steer loader. The removal process involves disconnecting hoses and tubes, removing fasteners, and lifting the turbocharger off the exhaust manifold. Installation is the reverse, cleaning surfaces, replacing gaskets and seals, lubricating bearings, and reconnecting all tubes and hoses. Proper torque values are specified for all fasteners. Inspection of the turbocharger and actuator is also recommended before installation.
This document provides instructions for removing and installing a turbocharger on a Caterpillar 226B skid steer loader. The removal process involves disconnecting hoses and tubes, removing fasteners, and lifting the turbocharger off the exhaust manifold. Installation is the reverse, cleaning surfaces, replacing gaskets and seals, lubricating bearings, and reconnecting all tubes and hoses. Proper torque values are specified for all fasteners. Inspection of the turbocharger and actuator is also recommended before installation.
Caterpillar cat 226 b skid steer loader (prefix mjh) service repair manual (m...fkjsekksmem
This document provides instructions for removing and installing a fuel injection pump, fuel injectors, and turbocharger on a Caterpillar 226B skid steer loader. The fuel injection pump removal process involves disconnecting fuel lines, loosening mounting bolts and nuts, and removing shims. Installation requires cleaning surfaces, installing shims to set fuel timing, and tightening bolts. Fuel injector removal requires disconnecting lines and using a socket, while installation applies sealant to threads and tightens. Turbocharger removal disconnects hoses and tubes, and loosens nuts and bolts, while installation cleans surfaces, lubricates bearings, and reattaches components with new gaskets and seals.
Jcb 541 t70 telescopic handler service repair manual sn 2336575 and upfujsjefskekm
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. The manual provides removal and installation instructions, torque specifications, and other technical details needed for repair and maintenance.
Jcb 550 80 telescopic handler service repair manual sn 2336575 and upfujsjefskekm
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems like the engine, brakes, hydraulics and electrical systems. The document provides removal and installation instructions, specifications, and safety information to correctly service and maintain the machines.
Jcb 531 70 telescopic handler service repair manual sn 2336575 and upfusoelskemfm
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 531 70 telescopic handler service repair manual sn 2336575 and upudfjjdfjkksekm
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. The manual provides removal and installation instructions, technical specifications, and safety information.
Jcb 541 70 telescopic handler service repair manual sn 2336575 and upkmf8sueddkk
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. Procedures are provided for maintenance, removal and installation of parts, and repair. Safety warnings are included throughout regarding working on and operating the machines.
Jcb 531 t70 telescopic handler service repair manual sn 2336575 and upufjjsjekkdemd
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 541 t70 telescopic handler service repair manual sn 2336575 and upkmf8sueddkk
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 535 t95 telescopic handler service repair manual sn 2336575 and upfusoelskemfm
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 541 70 telescopic handler service repair manual sn 2336575 and upfhsejkdkme
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 531 t70 telescopic handler service repair manual sn 2336575 and upyhhjjkfkseme
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 541 t70 telescopic handler service repair manual sn 2336575 and upfiskefjskemem
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. The manual provides removal and installation instructions, specifications, and safety information.
Jcb 533 105 telescopic handler service repair manual sn 2336575 and upudfjjdfjkksekm
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. The manual provides removal and installation instructions, torque specifications, and other technical details needed for repair and maintenance.
This document provides information about a high pressure cleaner system from PressureJet, including:
1. Specifications for a PJS 15250 high pressure pump with 250 bar pressure and 15 LPM flow rate.
2. An overview of PressureJet's quality control processes and features compared to other manufacturers.
3. Details on the components, accessories, and options available for customizing a complete high pressure cleaning system.
Caterpillar cat 226 b skid steer loader (prefix mjh) service repair manual (m...ujfdujjskkekmd
This document provides instructions for removing and installing a fuel injection pump on a Caterpillar 226B skid steer loader. The removal process involves:
1) Removing fuel injection lines and disconnecting any flexible fuel return hoses
2) Gradually loosening fasteners to remove the pump from the cylinder block
3) Recording shim thickness for reinstallation
The installation process is the reverse, ensuring the correct shim thickness is used to set fuel injection timing. Proper cleaning and torque specifications are also provided.
Caterpillar cat el240 b excavator (prefix 5wg) service repair manual (5wg0000...ufjjsjekksemmd
The document provides instructions for removing and installing an engine oil cooler on an excavator model EL240B. It describes removing the oil filter base, then removing the oil cooler and its gasket and O-ring seals. For installation, it describes installing new O-ring seals and gasket on the oil cooler before installing it along with the gasket and tightening bolts, then reinstalling the oil filter base.
Caterpillar cat 320 c excavator (prefix bea) service repair manual (bea00001 ...jjdjfkkskemme
This document provides instructions for removing a bucket cylinder from an excavator. It begins by noting the importance of relieving pressure from hydraulic systems before disassembly to prevent injury. The steps include releasing hydraulic pressure, attaching lifting devices, removing retaining bolts and pins, and disconnecting hoses. Identification marks should be made on all lines and components. Cleanliness is important during disassembly and reassembly to prevent contamination of hydraulic systems.
This document provides instructions for removing and installing a turbocharger on a Caterpillar 226B skid steer loader. The removal process involves disconnecting hoses and tubes, removing fasteners, and lifting the turbocharger off the exhaust manifold. Installation is the reverse, cleaning surfaces, replacing gaskets and seals, lubricating bearings, and reconnecting all tubes and hoses. Proper torque values are specified for all fasteners. Inspection of the turbocharger and actuator is also recommended before installation.
This document provides instructions for removing and installing a turbocharger on a Caterpillar 226B skid steer loader. The removal process involves disconnecting hoses and tubes, removing fasteners, and lifting the turbocharger off the exhaust manifold. Installation is the reverse, cleaning surfaces, replacing gaskets and seals, lubricating bearings, and reconnecting all tubes and hoses. Proper torque values are specified for all fasteners. Inspection of the turbocharger and actuator is also recommended before installation.
This document provides instructions for removing and installing a turbocharger on a Caterpillar 226B skid steer loader. The removal process involves disconnecting hoses and tubes, removing fasteners, and lifting the turbocharger off the exhaust manifold. Installation is the reverse, cleaning surfaces, replacing gaskets and seals, lubricating bearings, and reconnecting all tubes and hoses. Proper torque values are specified for all fasteners. Inspection of the turbocharger and actuator is also recommended before installation.
Caterpillar cat 226 b skid steer loader (prefix mjh) service repair manual (m...fkjsekksmem
This document provides instructions for removing and installing a fuel injection pump, fuel injectors, and turbocharger on a Caterpillar 226B skid steer loader. The fuel injection pump removal process involves disconnecting fuel lines, loosening mounting bolts and nuts, and removing shims. Installation requires cleaning surfaces, installing shims to set fuel timing, and tightening bolts. Fuel injector removal requires disconnecting lines and using a socket, while installation applies sealant to threads and tightens. Turbocharger removal disconnects hoses and tubes, and loosens nuts and bolts, while installation cleans surfaces, lubricates bearings, and reattaches components with new gaskets and seals.
Jcb 541 t70 telescopic handler service repair manual sn 2336575 and upfujsjefskekm
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. The manual provides removal and installation instructions, torque specifications, and other technical details needed for repair and maintenance.
Jcb 550 80 telescopic handler service repair manual sn 2336575 and upfujsjefskekm
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems like the engine, brakes, hydraulics and electrical systems. The document provides removal and installation instructions, specifications, and safety information to correctly service and maintain the machines.
Jcb 531 70 telescopic handler service repair manual sn 2336575 and upfusoelskemfm
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 531 70 telescopic handler service repair manual sn 2336575 and upudfjjdfjkksekm
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. The manual provides removal and installation instructions, technical specifications, and safety information.
Jcb 541 70 telescopic handler service repair manual sn 2336575 and upkmf8sueddkk
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. Procedures are provided for maintenance, removal and installation of parts, and repair. Safety warnings are included throughout regarding working on and operating the machines.
Jcb 531 t70 telescopic handler service repair manual sn 2336575 and upufjjsjekkdemd
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 541 t70 telescopic handler service repair manual sn 2336575 and upkmf8sueddkk
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 535 t95 telescopic handler service repair manual sn 2336575 and upfusoelskemfm
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 541 70 telescopic handler service repair manual sn 2336575 and upfhsejkdkme
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 531 t70 telescopic handler service repair manual sn 2336575 and upyhhjjkfkseme
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 541 t70 telescopic handler service repair manual sn 2336575 and upfiskefjskemem
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. The manual provides removal and installation instructions, specifications, and safety information.
Jcb 533 105 telescopic handler service repair manual sn 2336575 and upudfjjdfjkksekm
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. The manual provides removal and installation instructions, torque specifications, and other technical details needed for repair and maintenance.
Jcb 535 95 telescopic handler service repair manual sn 2336575 and upfujjsekleio
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems and components including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. The manual provides removal and installation instructions, technical specifications, and safety information.
Jcb 531 t70 telescopic handler service repair manual sn 2336575 and upfujjsekleio
This service manual provides instructions for servicing Loadall rough terrain variable reach trucks. It contains sections on machine systems including the engine, fuel system, cooling system, brakes, hydraulics, and electrical systems. The manual provides removal and installation instructions, torque specifications, and other technical details needed for repair and maintenance.
Jcb 536 t70 lp telescopic handler service repair manual sn 2336575 and upufujjsejfkkemme
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 550 80 telescopic handler service repair manual sn 2336575 and upjfjkskrtekfmsmem
This service manual provides information for servicing and repairing Loadall rough terrain variable reach trucks. It contains instructions for machine components, attachments, body and framework, operator station, heating and air conditioning, engine, fuel and exhaust systems, cooling system, brake system, steering system, driveline, hydraulic system, and electrical system. The manual instructs technicians on removal and installation of components like the engine, and provides torque specifications and other technical details.
Jcb 550 80 telescopic handler service repair manual sn 2336575 and up
2.1 Mud Pumps
1. PRESERVATION PROCEDURE
Page 1 of 7
Project/Order Number:
[INSERT CLIENT LOGO]
[INSERT RIG NAME]
PRESERVATION PROCEDURE FOR:
2.1 Mud Pumps #1
Procedure Number X.X-XXXX
COPY ISSUED TO REVISION
TO No.COPIES DATE Rev.No DATE DESCRIPTION BY
A 10-10-15 DRAFT MM
PREPARED BY:
CHECKED BY:
APPROVED BY:
No.OFF PAGES:
DATE ISSUED:
APPROVED BY: SIGNATURE: DATE:
[CLIENT NAME]
[ABS]
[DNV]
[OTHERS]
This document contains proprietary and confidential information which belongs to ModuStackingServices (MSS).,
its affiliates or subsidiaries (all collectively referred to hereinafter as "MSS"). It is loaned for limited purposes only
and remains the property of MSS. Reproduction, in whole or in part, or use of this design or distribution of this
information to others is not permitted without the express written consent of MSS. This document is to be returned
to MSS upon request and in any event upon completion of the use for which it was loaned. This document and the
information contained and represented herein is the copyrighted property of MSS.
3. PRESERVATION PROCEDURE
Page 3 of 7
Project/Order Number:
2.0 Mud Pumps #1 Preservation Procedure
Preservation Procedure
Item Equipment:
1 Cold Stack Date:
2 Equipment Make/Model:
3 Last OEM inspection Date:
4 Last OEM inspection report available:
5
Item Pre-Tasks (During Rig Move) VpCI Check
1 Add to one clean active mudpit 2.5% VpCI Powder. 609
2
Connect HP Standpipe manifold Including Rotary Hose to Choke manifold.
Circulate VpCI Powder through mud pumps, in any possible combination to
allow entire HP piping system to be circulated back to active mudpit.
3 Add 2.5% VpCI Powder to each liner wash tank. 609
4 Add 20% VpCI fluid to each mudpump gear sump. 326
5 Add 20% VpCI fluid to each mudpump chain case. (If applicable) 326
6 Run Mudpumps for 1 hour each.
7
Mechanical & Electrical Lock-Out (PTW) Cert Number
1
Mechanical & Electrical Lock-Out (PTW) filled out and equipment
checked for safe to work on.
2
Preservation Tasks VpCI Check
Item Mechanical:
1 Take photo of Mud Pumps prior starting preservation. (Insert below)
2
Verify that Tasks (During Rig Move) line items 1, 2, 3, 4, 5 & 6 have been
completed prior to Mud Pumps preservation tasks starts.
3 Wash and Clean exterior Mud Pumps of all mud, dirt and contaminants.
4
Inspect exterior of Mud Pumps for signs of large areas of corrosion. (If Yes see
below).
5
If large areas of corrosion and damage to coating/painting are found in
Mudpumps, areas shall be wire brushed or blasted cleaned and repaired
(painted) as per Owners OEM paint suppliers recommended repair procedure
for coating/painting to mitigate further deterioration.
6
Item Mechanical Fluid End:
1
Open each Suction & Discharge module remove and clean:
Valve Cap
Valves
Liner Retention System
Liners
Intermediate Rods
Piston Rods
Coat inside Suction & Discharge module with VpCI fluid. Coat all above items
with VpCI CorrLube and wrap in VpCI Blue, palletize and store.
368,
126 Blue
CorrLube
2 Coat entire Piston Rod, Intermediate Rod, Pony Rod Bay with VpCI fluid. 368
3
Item Power End:
1
Open inspection covers and spay all exposed areas including bearings with
VpCI fluid and close up.
368
2 Replace existing crankcase breather with ZEOZORB Breather. ZEOZORB
3
Open and clean out settling Chamber and spray with VpCI fluid and close back
up.
368
4
Open Cross head inspection covers and spay all exposed areas with VpCI
fluid
368
4. PRESERVATION PROCEDURE
Page 4 of 7
Project/Order Number:
Preservation Procedure
Item Preservation Tasks VpCI Check
5
Item Pulsation Dampener:
1
De-pressurize Dampener to minimum approximately 200 psi just to keep
bladder inflated.
2 Record Pulsation Dampener nitrogen pre-charge
3
Item Charge Pump & Motor:
1 Clean exterior of pump and motor.
2
Open Charge Pump motor connection box clean and spray with VpCI Aerosol
spray
248
3 Place VpCI emitters inside connection box and close up.
101, 105,
111
4
Spray all motor and external, cables and plug connections, hoses with thin film
of VpCI fluid.
368
5 Megger electrical motor and record.
6 Cover electrical motor with VpCI plastic wrap. 126-Blue
7
Open flexible couplings and clean, re-grease with VpCI CorrLube and close
up.
CorrLube
8 Add to each pump bearing housing 5% VpCI fluid and rotate. 368
9
Thoroughly grease pump bearings as per OEM grease chart with rust
inhibiting grease. Use enough to force all old grease out of the cavities. VpCI
CorrLube. (If Applicable)
CorrLube
10 Spray entire pump skid with VpCI fluid 368
11
Item External Lube Oil Pump & Motor:
1 Clean exterior of pump and motor.
2
Open Lube Oil Pump & Motor connection box clean and spray with VpCI
Aerosol spray
248
3 Place VpCI emitters inside connection box and close up.
101, 105,
111
4
Spray all motor and external, cables and plug connections, hoses with thin film
of VpCI fluid.
368
5 Megger electrical motor and record.
6 Cover electrical motor with VpCI plastic wrap. 126-Blue
7
Open flexible couplings and clean, re-grease with VpCI CorrLube and close
up.
CorrLube
8 Add to each pump bearing housing 5% VpCI fluid and rotate. 368
9
Thoroughly grease pump bearings as per OEM grease chart with rust
inhibiting grease. Use enough to force all old grease out of the cavities. VpCI
CorrLube. (If Applicable)
CorrLube
10 Spray entire pump skid with VpCI fluid 368
11
Item Main Drive Motor AC-Type GEB22 Horizontal:
1 Re-lease dive belt tension. (If Applicable)
2 Clean exterior of drive motor.
3 Open all motor connection covers clean and spray with VpCI Aerosol spray 248
4 Place VpCI emitters inside connection boxes, motor and close up.
101, 105,
111
5
Close up any external openings from motor (i.e. blower exhaust ports) with
VpCI Blue and VpCI Foam Tape
126 Blue,
150
6
Grease motor bearings with VpCI CorrLube. (If required by Owner, Note from
GEB Manual The drill motor’s rotor anti–friction bearings are packed with
grease at motor assembly, and require no attention until overhaul.)
CorrLube
7 Megger electrical motor and record.
8
Spray all motor and external, cables and plug connections, hoses with thin film
of VpCI fluid.
368
5. PRESERVATION PROCEDURE
Page 5 of 7
Project/Order Number:
Preservation Procedure
Item Preservation Tasks VpCI Check
9
Item Main Drive Motor DC-Type GE-752 Horizontal:
1 Re-lease dive belt tension. (If Applicable)
2 Clean exterior of drive motor.
3
Pull brushes from holders on motors. Wrap in VpCI Blue and store brushes in
store room.
126 Blue
4 Open all motor connection covers clean and spray with VpCI Aerosol spray 248
5
Place VpCI emitters inside connection boxes including brush holder
compartment and close up.
101, 105,
111
6
Close up any external openings from motor (i.e. blower exhaust ports) with
VpCI Blue and VpCI Foam Tape
126 Blue,
150
7 Grease motor bearings with VpCI CorrLube. (If required by Owner) CorrLube
8 Megger electrical motor and record.
9
Spray all motor and external, cables and plug connections, hoses with thin film
of VpCI fluid.
368
10
Item Blower Motors:
1 Clean exterior of Blower assembly
2 Open all motor connection covers clean and spray with VpCI Aerosol spray 248
3 Place VpCI emitters inside connection boxes, motor and close up.
101, 105,
111
4 Grease motor bearings with VpCI CorrLube. (If required by Owner) CorrLube
5 Cover electrical motor with VpCI plastic wrap. 126-Blue
6 Megger electrical motor and record.
7
Close up any external openings from motor (i.e. blower supply filter housing)
with VpCI Blue and VpCI Foam Tape
126 Blue,
150
8
Spray all motor and external, cables and plug connections, hoses with thin film
of VpCI fluid.
368
9
Item Other Electrical in Mudpump Room;
1
All other installed panels and J-boxes in mudpump room to be open cleaned
and sprayed with VpCI Aerosol spray
248
2 Place VpCI emitters inside panels and J-boxes, close up.
101, 105,
111
3
Item General;
1
Take oil sample after preservation is completed and send for analysis.
1. Sample needs to contain the following information.
2. Oil in use (i.e. Shell Omala 460)
3. Brand Name off additive and percentage (%) added.
4. Hours on oil.
2
Re-visiting time, 6-months, 1-year, to verify preservation condition. (Owner to
advise on preferred time interval)
3 Take photo of Mudpumps after completed preservation. (Insert below)
4
De-Preservation of equipment based on used preservation fluids needs to be
verified with Cortec VpIC, Unless stated in the procedural steps typically does
not require removal prior to equipment re-activation.
5
6. PRESERVATION PROCEDURE
Page 6 of 7
Project/Order Number:
3.0 Sign Off Record
Sign Off For Preservation
Name Signature Date
4.0 Recording Records
Recording Records
Description: Reading (Value)
Main Drive Motor (A) MΩ
Blower Motor (A) MΩ
Main Drive Motor (B) MΩ
Blower Motor (B) MΩ
Super Charge Pump Motor MΩ
External Lube Oil Pump Motor MΩ
Liner Wash Pump Motor MΩ
Pulsation Dampener Pre-Charge PSI
5.0 Photos
[Insert Photo] [Insert Photo]
[Insert Photo] [Insert Photo]
[Insert Photo] [Insert Photo]
7. PRESERVATION PROCEDURE
Page 7 of 7
Project/Order Number:
6.0 Cortec VpCI Product Description suggested for preservation of Mud Pumps #1
Product Number Duration Of Protection Data/Application Sheet
VpCI-101
24 months during operation and/or
shutdown VpCI-101.pdf
VpCI-105
Provides continuous protection for
up to 24 months VpCI-105.pdf
VpCI-111
Provides continuous protection for
up to 24 months VpCI-111.pdf
VpCI-126 Blue
Protects metal parts from all types of
corrosion including rust, tarnish,
stains, white rust, and oxidation for
up to 5 years
VpCI-126 Blue.pdf
VpCI-150 & 170
Provides continuous protection for
up to 24 months VpCI-150 & 170.pdf
VpCI- 248
Is effective for 6+ months with
proper controls VpCI-248.pdf
VpCI-326
Providing continuous corrosion
protection during operation, standby,
and shutdown periods
VpCI-326.pdf
VpCI-368
Proven coating that provides
excellent protection to metal
substrates exposed to harsh outdoor
conditions.
VpCI-368.pdf
VpCI-609
For wet corrosion protection.
Provides up to 24 months of
continuous protection
VpCI-609.pdf
CorrLube VpCI Lithium EP Grease
VpCI CorrLube is suitable for both
operating and lay-up conditions CorrLube VpCI
Lithium EP Grease.pdf
ZEOZORB Breathers Long term protection -1 year
ZEOZORB
Breathers.pdf