121
•
0 likes•125 views
This document provides information about the Tedea-Huntleigh Model 121 high capacity compression load cell. It can measure loads from 10-50 tons and is suitable for applications like truck scales, silos, trains, and industrial weighing. The load cell has a stainless steel housing, accurate measurements within 0.03%, and can operate in hazardous areas. It transfers load measurements through a 6-wire sense circuit and has other features suitable for heavy duty weighing. Dimensional drawings and specifications are provided.
Report
Share
Report
Share
Download to read offline
Recommended
250
The document describes the Tedea-Huntleigh Model 250 load cell, which is used in elevators for safety, traffic control, and energy saving purposes. It is a low-profile, pancake-type load cell with a built-in amplifier that is commonly placed between the inner and outer elevator cages. The load cell senses the weight in the elevator and transmits this information to the control system. It is used as an overload sensor for safety, to determine which elevator to send for traffic control, and to provide information to energy saving algorithms in the control system.
60048
This document summarizes a low profile platform cell load cell model 60048 from Sensortronics. It has the following key features:
- Rated capacities from 25 to 1000 pounds
- Stainless steel construction
- Moment-compensated design for minimal sensitivity to off-center loading
- Meets NIST H-44 requirements and provides protection under adverse conditions
- Sealed to IP67 standards and approved for hazardous environments
620
This document summarizes a load cell product from Tedea-Huntleigh. It provides specifications for a stainless steel S-type load cell model 620 with capacities ranging from 500 to 5000 kg. It details the load cell's features such as stainless steel construction, IP68 sealing, and approvals. Dimensions, technical specifications, and mounting thread options are provided. The document also includes disclaimer information from Vishay Precision Group.
92001
This document provides information on the Sensortronics Model 92001 single-point alloy steel load cell, including its specifications, features, applications, description, dimensions, wiring details, and disclaimer. The load cell has a capacity range of 50-1500kg, is made of alloy steel or stainless steel, and is designed for direct mounting in large platform scales. It provides high accuracy for use in counting, bench, and floor scales.
3520
This document provides information about the Tedea-Huntleigh Model 3520 Stainless Steel Shear Beam Load Cell. It has capacities from 500-2000 kg, is constructed of stainless steel, and is sealed to IP67. It is designed for use in low profile platforms, pallet scales, tank and silo weighing, and food industry platforms. The load cell has high immunity to shock or side loading and high accuracy up to 6000 divisions. It provides a low profile design ideal for modern industrial scales.
HOC
This document summarizes a high capacity off-center single-point load cell model HOC from Celtron. It has capacities of 750, 1000, and 2000 kg. It is fully sealed and side mount construction. It is designed for platform and hanging scales. It provides excellent protection against moisture. It has specifications including accuracy class, capacities, rated output, temperature range, safe overload rating and more.
60040
This document provides information about the Sensortronics Model 60040 low profile bending beam load cell. It can measure loads between 25 to 500 pounds in tension or compression. It has an IP65 rating and approval for use in hazardous environments. The load cell is compact at 1.34 inches long and is commonly used in platform scales, conveyor scales, and other process weighing applications. Key specifications of the load cell such as rated capacity, accuracy, temperature range, and output signal are also listed.
60060
This document summarizes information about a low profile platform load cell model 60060 produced by Sensortronics. It has the following key points:
- It is designed for direct mounting of large platforms for uses such as scales, conveyor belts, and hoppers.
- It has a low profile aluminum design and is rated for capacities from 100 to 2000 pounds.
- It is approved to stringent standards like OIML and NTEP and is suitable for hazardous environments.
Recommended
250
The document describes the Tedea-Huntleigh Model 250 load cell, which is used in elevators for safety, traffic control, and energy saving purposes. It is a low-profile, pancake-type load cell with a built-in amplifier that is commonly placed between the inner and outer elevator cages. The load cell senses the weight in the elevator and transmits this information to the control system. It is used as an overload sensor for safety, to determine which elevator to send for traffic control, and to provide information to energy saving algorithms in the control system.
60048
This document summarizes a low profile platform cell load cell model 60048 from Sensortronics. It has the following key features:
- Rated capacities from 25 to 1000 pounds
- Stainless steel construction
- Moment-compensated design for minimal sensitivity to off-center loading
- Meets NIST H-44 requirements and provides protection under adverse conditions
- Sealed to IP67 standards and approved for hazardous environments
620
This document summarizes a load cell product from Tedea-Huntleigh. It provides specifications for a stainless steel S-type load cell model 620 with capacities ranging from 500 to 5000 kg. It details the load cell's features such as stainless steel construction, IP68 sealing, and approvals. Dimensions, technical specifications, and mounting thread options are provided. The document also includes disclaimer information from Vishay Precision Group.
92001
This document provides information on the Sensortronics Model 92001 single-point alloy steel load cell, including its specifications, features, applications, description, dimensions, wiring details, and disclaimer. The load cell has a capacity range of 50-1500kg, is made of alloy steel or stainless steel, and is designed for direct mounting in large platform scales. It provides high accuracy for use in counting, bench, and floor scales.
3520
This document provides information about the Tedea-Huntleigh Model 3520 Stainless Steel Shear Beam Load Cell. It has capacities from 500-2000 kg, is constructed of stainless steel, and is sealed to IP67. It is designed for use in low profile platforms, pallet scales, tank and silo weighing, and food industry platforms. The load cell has high immunity to shock or side loading and high accuracy up to 6000 divisions. It provides a low profile design ideal for modern industrial scales.
HOC
This document summarizes a high capacity off-center single-point load cell model HOC from Celtron. It has capacities of 750, 1000, and 2000 kg. It is fully sealed and side mount construction. It is designed for platform and hanging scales. It provides excellent protection against moisture. It has specifications including accuracy class, capacities, rated output, temperature range, safe overload rating and more.
60040
This document provides information about the Sensortronics Model 60040 low profile bending beam load cell. It can measure loads between 25 to 500 pounds in tension or compression. It has an IP65 rating and approval for use in hazardous environments. The load cell is compact at 1.34 inches long and is commonly used in platform scales, conveyor scales, and other process weighing applications. Key specifications of the load cell such as rated capacity, accuracy, temperature range, and output signal are also listed.
60060
This document summarizes information about a low profile platform load cell model 60060 produced by Sensortronics. It has the following key points:
- It is designed for direct mounting of large platforms for uses such as scales, conveyor belts, and hoppers.
- It has a low profile aluminum design and is rated for capacities from 100 to 2000 pounds.
- It is approved to stringent standards like OIML and NTEP and is suitable for hazardous environments.
65016
The document describes a double-ended shear beam load cell model 65016 from Sensortronics. It has rated capacities from 1000 to 100,000 pounds. It is insensitive to side loads and bending moments. It provides high output well-suited for high deadload, low liveload applications. It has excellent combined error and repeatability. Dimensions and specifications are provided for load cells in various capacity ranges.
120
The document describes the Model 120 high capacity compression load cell from Tedea-Huntleigh. It has capacities from 3 to 50 tons and is suitable for heavy duty weighing applications like truck scales, silos, and rail scales. The load cell features a stainless steel housing for corrosion protection and has an accuracy of 0.02% total error. It uses a 6-wire sense circuit and has an optional hazardous area approval. Dimensions and specifications are provided.
240
This document summarizes information about the Tedea-Huntleigh Model 240 fluid-damped single-point load cell. It describes the load cell's key features such as its capacity range of 2-50 kg, IP66 protection rating, and stainless steel construction option. Application examples listed include multi-head filling machines, check weighing, grading machines, and liquid filling. Specifications for the load cell are also provided relating to accuracy, temperature range, overload limits, and wiring.
SEB
This document summarizes information about the Celtron Model SEB single-ended beam load cell. It lists the key features such as capacities from 500 kg to 2.5T and OIML C3 approval. Application examples include truck scales, silo weighing, and packaging machines. Dimensional drawings and specifications are provided, including accuracy, temperature range, and overload limits. A disclaimer notice is also included.
65058-TSA
This document summarizes a truck scale assembly product. The 65058-TSA assembly can handle capacities from 10,000 to 75,000 pounds. It uses double-ended shear beam load cells sealed to IP67 standards. The assembly allows for controlled floating of the scale deck. It is rated intrinsically safe and certified for legal-for-trade applications in the US and internationally. Specifications include accuracy classes, temperature ranges, overload limits, and more.
1006
This document summarizes a load cell model 1006 produced by Tedea-Huntleigh. It is an aluminum single-point load cell with capacities between 2-5 kg designed for direct mounting in low capacity scales. It offers high precision and performance in a small size, making it suitable for applications like postal scales, counting scales, and general purpose weighing scales. The document provides specifications, dimensions, and other technical details of the load cell.
65016-TWA
This document summarizes specifications for the Sensortronics Model 65016-TWA tank weighing assembly load cell. It has a capacity range of 1,000 to 75,000 pounds, mounts directly to floors or structures, and is self-checking with provisions for thermal expansion. It provides high accuracy even with agitated loads and is rated for use in hazardous environments. Dimensions and technical specifications are provided.
615 616
This document provides information on Tedea-Huntleigh models 615 and 616 tension compression load cells. The load cells have capacities ranging from 50-1000 kg, are constructed of nickel-plated steel or stainless steel, and have IP67 protection. They can be used in tension or compression applications and have a 6-wire circuit. The document includes specifications, dimensions, and wiring diagrams for the load cells.
355
The document summarizes a welded, hermetically sealed load cell model 355 produced by Tedea-Huntleigh. It has capacities from 5-500 kg, is constructed of stainless steel, and has IP68 environmental protection rating. Its low profile, high accuracy, and sealing make it suitable for applications requiring sealed load cells like platforms, packaging machines, and other applications in harsh environments. It also has hazardous area certification as an option.
65058S
This document describes the Sensortronics Model 65058S stainless steel, welded seal double-ended shear beam load cell. It has the following key features:
- Rated capacities from 10,000 to 100,000 pounds
- Stainless steel welded seal construction provides protection to IP68 standards
- Insensitive to side loads and bending moments
- Integral conduit adapter and additional sense wires for temperature compensation
9803
The document is a technical specification sheet for Vishay Precision Group's Model 9803 Double-Ended Beam Load Cell. It describes the key features and specifications of the load cell, which include capacities from 25k to 75k lbs, IP67 environmental protection, stainless steel material, NTEP class IIIL certification, and optional FM approval for explosive atmospheres. Dimensions and technical specifications are provided for the load cell, including accuracy, temperature performance, load limits, and mounting instructions.
5303
This document summarizes specifications for a double-ended beam load cell model 5303 produced by Revere. It has capacities ranging from 25,000 to 125,000 lbs and is certified to NTEP class IIIL standards with up to 10,000 verification intervals. Key features include IP67 environmental protection, nickel-plated steel material, and optional FM approval for explosive atmospheres. It is designed for use in certified truck and rail scales to measure weights in applications like silos, tanks, hoppers, and weighbridges.
614
The document summarizes a Model 614 tension-compression load cell produced by Tedea-Huntleigh. It provides key specifications of the load cell such as its capacities ranging from 50-500 kg, aluminum construction, IP67 protection rating, 6-wire circuit, and operating temperature range. The load cell is suitable for various weighing applications including hopper scales, belt weighing, material testing machines, and dynamometers. Dimensional drawings and additional technical specifications of the load cell are also included.
91002
This document summarizes a load cell model 91002 designed for crane scale and hanging scale applications. It has the following key features:
- Capacity of 1.5 to 30 tons
- Made of alloy steel with integrated overload protection for both tension and compression
- Includes a cable and allows direct mounting of a weight indicator
- Has an IP67 rating for harsh environments
PSD
The Celtron Precision Shear Web Disk (PSD) is a low profile load cell for weighing applications. It has capacities from 0.2 to 25 tons and is constructed of alloy steel. The PSD has excellent performance even under side loading and meets various accuracy standards. It provides accurate weighing for applications such as testing machines, platform scales, and truck scales.
3310
This document provides information about the Tedea-Huntleigh Model 3310 aluminum shear beam load cell. It describes the key features and specifications of the load cell. The load cell has a rated capacity of 250-1000 kg, is constructed of anodized aluminum, has IP67 protection, and is designed for use in low profile platform scales, medical bed weighing, and tank and silo weighing. The document provides detailed specifications for parameters like rated output, temperature range, safe overload limit, and dimensions. It also includes a wiring schematic diagram.
LCD
The document describes the Low Profile Compression Disk model LCD, which is designed for applications requiring low height for safety reasons. It can withstand side forces. The LCD comes in various standard capacities between 5k and 100k lbs. It is constructed of alloy steel and potted to be moisture and humidity resistant. Dimensional specifications and technical specifications are provided, including accuracy classes, outputs, temperature ranges, overloads, and construction materials.
98001
The document describes the Model 98001 Low Profile Universal Load Cell produced by Sensortronics. It has the following key features and specifications:
- It has a capacity ranging from 0.5 to 100 tons for tension and compression loading.
- Made of alloy steel, it is ideal for universal testing machines and provides excellent immunity to impact and side forces.
- Specifications include a rated output of 2.0 mV/V, a combined error under 0.10% of full scale, non-linearity under 0.050% of full scale, and an operating temperature range of -20 to +70 degrees Celsius.
- It includes integrated overload protection for compression loading and has an IP67
60063
This document summarizes information about the Model 60063 Stainless Steel, Welded Seal S-Beam Load Cell produced by Sensortronics. The load cell has a rated capacity of 500 to 10,000 pounds, is constructed of stainless steel with welded sealing, and is designed for use in hazardous and hostile environments. It provides high accuracy measurements for applications such as process weighing, force measurement, and level and inventory monitoring.
116
The document describes the Model 116 Rocker Column Load Cell. It has capacities of 30 and 40 tons, is self-restoring, compact, environmentally sealed to IP66/IP68 standards, and has a current calibration output that allows easy parallel connection of multiple load cells. It is designed for heavy weighing applications like weighbridges, silos, hoppers, and process weighing. The load cell has specifications for accuracy, temperature range, overload limits, excitation requirements, and construction using coated alloy steel and aluminum.
STC
The document provides information on Celtron's S-Type load cell model STC. It details the key features, applications, descriptions, specifications and dimensions. The S-Type load cell can measure tension and compression loads, and is made of aluminum, alloy steel or stainless steel. It has capacities ranging from 1 kg to 40,000 lbs and is sealed to IP67.
SPATULA & KITCHEN UTENSILS
This document provides specifications for various types of spatulas, spoons, cutters and kitchen tools. It lists the product name in English and Chinese, size, packaging details, part numbers and effective dates for each item. In total over 50 different tools are described, including curved edge spatulas, fried turners, dough dividers, perforated spatulas, wide spatulas, reamer side spatulas, rice spoons, serving spoons, spoon rests, square spoons, rectangular serving spoons and oval spoons. The tools have wooden, plastic or stainless steel handles and vary in size from 10 to 32.5 centimeters.
More Related Content
What's hot
65016
The document describes a double-ended shear beam load cell model 65016 from Sensortronics. It has rated capacities from 1000 to 100,000 pounds. It is insensitive to side loads and bending moments. It provides high output well-suited for high deadload, low liveload applications. It has excellent combined error and repeatability. Dimensions and specifications are provided for load cells in various capacity ranges.
120
The document describes the Model 120 high capacity compression load cell from Tedea-Huntleigh. It has capacities from 3 to 50 tons and is suitable for heavy duty weighing applications like truck scales, silos, and rail scales. The load cell features a stainless steel housing for corrosion protection and has an accuracy of 0.02% total error. It uses a 6-wire sense circuit and has an optional hazardous area approval. Dimensions and specifications are provided.
240
This document summarizes information about the Tedea-Huntleigh Model 240 fluid-damped single-point load cell. It describes the load cell's key features such as its capacity range of 2-50 kg, IP66 protection rating, and stainless steel construction option. Application examples listed include multi-head filling machines, check weighing, grading machines, and liquid filling. Specifications for the load cell are also provided relating to accuracy, temperature range, overload limits, and wiring.
SEB
This document summarizes information about the Celtron Model SEB single-ended beam load cell. It lists the key features such as capacities from 500 kg to 2.5T and OIML C3 approval. Application examples include truck scales, silo weighing, and packaging machines. Dimensional drawings and specifications are provided, including accuracy, temperature range, and overload limits. A disclaimer notice is also included.
65058-TSA
This document summarizes a truck scale assembly product. The 65058-TSA assembly can handle capacities from 10,000 to 75,000 pounds. It uses double-ended shear beam load cells sealed to IP67 standards. The assembly allows for controlled floating of the scale deck. It is rated intrinsically safe and certified for legal-for-trade applications in the US and internationally. Specifications include accuracy classes, temperature ranges, overload limits, and more.
1006
This document summarizes a load cell model 1006 produced by Tedea-Huntleigh. It is an aluminum single-point load cell with capacities between 2-5 kg designed for direct mounting in low capacity scales. It offers high precision and performance in a small size, making it suitable for applications like postal scales, counting scales, and general purpose weighing scales. The document provides specifications, dimensions, and other technical details of the load cell.
65016-TWA
This document summarizes specifications for the Sensortronics Model 65016-TWA tank weighing assembly load cell. It has a capacity range of 1,000 to 75,000 pounds, mounts directly to floors or structures, and is self-checking with provisions for thermal expansion. It provides high accuracy even with agitated loads and is rated for use in hazardous environments. Dimensions and technical specifications are provided.
615 616
This document provides information on Tedea-Huntleigh models 615 and 616 tension compression load cells. The load cells have capacities ranging from 50-1000 kg, are constructed of nickel-plated steel or stainless steel, and have IP67 protection. They can be used in tension or compression applications and have a 6-wire circuit. The document includes specifications, dimensions, and wiring diagrams for the load cells.
355
The document summarizes a welded, hermetically sealed load cell model 355 produced by Tedea-Huntleigh. It has capacities from 5-500 kg, is constructed of stainless steel, and has IP68 environmental protection rating. Its low profile, high accuracy, and sealing make it suitable for applications requiring sealed load cells like platforms, packaging machines, and other applications in harsh environments. It also has hazardous area certification as an option.
65058S
This document describes the Sensortronics Model 65058S stainless steel, welded seal double-ended shear beam load cell. It has the following key features:
- Rated capacities from 10,000 to 100,000 pounds
- Stainless steel welded seal construction provides protection to IP68 standards
- Insensitive to side loads and bending moments
- Integral conduit adapter and additional sense wires for temperature compensation
9803
The document is a technical specification sheet for Vishay Precision Group's Model 9803 Double-Ended Beam Load Cell. It describes the key features and specifications of the load cell, which include capacities from 25k to 75k lbs, IP67 environmental protection, stainless steel material, NTEP class IIIL certification, and optional FM approval for explosive atmospheres. Dimensions and technical specifications are provided for the load cell, including accuracy, temperature performance, load limits, and mounting instructions.
5303
This document summarizes specifications for a double-ended beam load cell model 5303 produced by Revere. It has capacities ranging from 25,000 to 125,000 lbs and is certified to NTEP class IIIL standards with up to 10,000 verification intervals. Key features include IP67 environmental protection, nickel-plated steel material, and optional FM approval for explosive atmospheres. It is designed for use in certified truck and rail scales to measure weights in applications like silos, tanks, hoppers, and weighbridges.
614
The document summarizes a Model 614 tension-compression load cell produced by Tedea-Huntleigh. It provides key specifications of the load cell such as its capacities ranging from 50-500 kg, aluminum construction, IP67 protection rating, 6-wire circuit, and operating temperature range. The load cell is suitable for various weighing applications including hopper scales, belt weighing, material testing machines, and dynamometers. Dimensional drawings and additional technical specifications of the load cell are also included.
91002
This document summarizes a load cell model 91002 designed for crane scale and hanging scale applications. It has the following key features:
- Capacity of 1.5 to 30 tons
- Made of alloy steel with integrated overload protection for both tension and compression
- Includes a cable and allows direct mounting of a weight indicator
- Has an IP67 rating for harsh environments
PSD
The Celtron Precision Shear Web Disk (PSD) is a low profile load cell for weighing applications. It has capacities from 0.2 to 25 tons and is constructed of alloy steel. The PSD has excellent performance even under side loading and meets various accuracy standards. It provides accurate weighing for applications such as testing machines, platform scales, and truck scales.
3310
This document provides information about the Tedea-Huntleigh Model 3310 aluminum shear beam load cell. It describes the key features and specifications of the load cell. The load cell has a rated capacity of 250-1000 kg, is constructed of anodized aluminum, has IP67 protection, and is designed for use in low profile platform scales, medical bed weighing, and tank and silo weighing. The document provides detailed specifications for parameters like rated output, temperature range, safe overload limit, and dimensions. It also includes a wiring schematic diagram.
LCD
The document describes the Low Profile Compression Disk model LCD, which is designed for applications requiring low height for safety reasons. It can withstand side forces. The LCD comes in various standard capacities between 5k and 100k lbs. It is constructed of alloy steel and potted to be moisture and humidity resistant. Dimensional specifications and technical specifications are provided, including accuracy classes, outputs, temperature ranges, overloads, and construction materials.
98001
The document describes the Model 98001 Low Profile Universal Load Cell produced by Sensortronics. It has the following key features and specifications:
- It has a capacity ranging from 0.5 to 100 tons for tension and compression loading.
- Made of alloy steel, it is ideal for universal testing machines and provides excellent immunity to impact and side forces.
- Specifications include a rated output of 2.0 mV/V, a combined error under 0.10% of full scale, non-linearity under 0.050% of full scale, and an operating temperature range of -20 to +70 degrees Celsius.
- It includes integrated overload protection for compression loading and has an IP67
60063
This document summarizes information about the Model 60063 Stainless Steel, Welded Seal S-Beam Load Cell produced by Sensortronics. The load cell has a rated capacity of 500 to 10,000 pounds, is constructed of stainless steel with welded sealing, and is designed for use in hazardous and hostile environments. It provides high accuracy measurements for applications such as process weighing, force measurement, and level and inventory monitoring.
116
The document describes the Model 116 Rocker Column Load Cell. It has capacities of 30 and 40 tons, is self-restoring, compact, environmentally sealed to IP66/IP68 standards, and has a current calibration output that allows easy parallel connection of multiple load cells. It is designed for heavy weighing applications like weighbridges, silos, hoppers, and process weighing. The load cell has specifications for accuracy, temperature range, overload limits, excitation requirements, and construction using coated alloy steel and aluminum.
Viewers also liked
STC
The document provides information on Celtron's S-Type load cell model STC. It details the key features, applications, descriptions, specifications and dimensions. The S-Type load cell can measure tension and compression loads, and is made of aluminum, alloy steel or stainless steel. It has capacities ranging from 1 kg to 40,000 lbs and is sealed to IP67.
SPATULA & KITCHEN UTENSILS
This document provides specifications for various types of spatulas, spoons, cutters and kitchen tools. It lists the product name in English and Chinese, size, packaging details, part numbers and effective dates for each item. In total over 50 different tools are described, including curved edge spatulas, fried turners, dough dividers, perforated spatulas, wide spatulas, reamer side spatulas, rice spoons, serving spoons, spoon rests, square spoons, rectangular serving spoons and oval spoons. The tools have wooden, plastic or stainless steel handles and vary in size from 10 to 32.5 centimeters.
65058
This load cell is rated for capacities between 10,000 and 100,000 pounds. It is designed for use in certified truck and rail scales and is Factory Mutual approved for use in hazardous environments. Key features include an IP67 rating and certification under both NTEP and OIML legal for trade standards between 20,000 to 100,000 pounds.
APPARELS
This document contains product listings and specifications for chef's uniforms and accessories. It includes jackets, hats, aprons and caps in various sizes, materials, colors and styles. Packaging details like pieces per carton and art numbers are provided for ordering. The listings are effective from various dates between 2010-2015.
MDBD
This document provides a legal disclaimer notice for Vishay Precision Group. It states that all product specifications and data are subject to change without notice, and that VPG disclaims any liability for errors, inaccuracies, or incompleteness in information. It also disclaims warranties and liability for damages arising from application or use of products not expressly designed for life-saving applications. The notice is intended to limit VPG's liability and ensure customers understand that product specifications may vary.
MISCELANEOUS
This document provides product information for various plastic storage containers, baskets, drawers, colanders, furniture, locks, tools, cleaning supplies, tableware, and ironing boards. It includes the product name, size, packaging details, and item number for each product in both English and Chinese. The effective dates listed show when the information was last updated.
DSR
The document provides information on the Celtron Model DSR double-ended shear beam load cell. It has capacities from 1k to 75k lbs and features a double-ended center-load shear beam design that is free of horizontal movement and insensitive to side loads. It has an electroless nickel-plated alloy tool steel construction and optional hermetic sealing or stainless steel. Applications include silo, hopper, and tank weighing. Dimensions and specifications are provided.
1510
The document describes the Tedea-Huntleigh Model 1510 hermetically sealed single-point load cell. It is constructed of stainless steel, has an IP68 environmental protection rating, and is suitable for use in harsh industrial environments like food processing. The load cell has a capacity range of 100-500kg and can interface with hazardous area and legal for trade approved electronics. It outputs 2mV/V and has high accuracy even in conditions requiring frequent washdown.
9010
The document describes the Model 9010 self-contained weighing module. It has capacities from 3-90 kg and features adjustable tare load cancelling, viscous damping, overload protection, IP65 environmental protection, and fast weighing speeds. It is designed for applications with shock loading or where fast settling times are needed, like check weighers.
3510
The document describes a stainless steel shear beam load cell model 3510. It has capacities ranging from 300-5000 kg or 1000-5000 lbs. It is hermetically sealed to IP68 and approved to OIML R60 and NTEP standards. It is designed for use in harsh environments and low profile platforms. Optional approvals include hazardous area and FM. It has a stainless steel construction, guide slots for positioning, and dual shielded cable for moisture protection.
Viewers also liked (10)
Similar to 121
KSR
The document describes the Model KSR single-column compression load cell. It has capacities ranging from 6 to 280 tons, is IP66 sealed, and is suitable for high capacity platform scales, vessel weighing, silos, and process weighing. Key specifications of the load cell are provided such as accuracy, rated output, temperature performance, safe overload limits, and dimensions for various capacity models.
1320
This document provides information about the Tedea-Huntleigh Model 1320 high capacity single-point load cell. It can measure loads between 1000-2000 kg and features an aluminum construction, IP66 protection, and optional hazardous area approval. It is designed to directly mount weighing platforms up to 1200x1200mm, simplifying the construction of large scales, weigh bars, and hanging scales. The load cell is individually calibrated and tested to meet specifications.
1260
This document provides information on the Tedea-Huntleigh Model 1260 aluminum high capacity single-point load cell. It has capacities from 50-635 kg, is constructed of aluminum, and has an IP66 rating. It is designed for direct mounting of large platforms for use in applications such as large platform scales, hanging scales, and check weighing. The document provides details on specifications, dimensions, wiring, and approval ratings.
1140
This document provides information about the Model 1140 Stainless Steel Single-Point Load Cell manufactured by Tedea-Huntleigh. It is designed for direct mounting of small weighing platforms, with capacities ranging from 15-150 kg. Key features include stainless steel construction, IP65 protection, and optional hazardous area approval. It is well-suited for harsh environment small platforms and check weighing applications.
1130
This document summarizes information about the Tedea-Huntleigh Model 1130 stainless steel single-point load cell. It provides details on its features such as capacities from 7-100 kg, stainless steel construction, IP66 protection, and optional hazardous area approval. It describes the load cell's applications in harsh environment small platforms and check weighing. Dimensional drawings and specifications are also included.
1033
This document summarizes a low profile single-point load cell model 1033 produced by Tedea-Huntleigh. It has capacities from 10-30 kg and is designed for direct mounting on low cost weighing platforms. Its small size and high accuracy make it suitable for retail, bench, and counting scales. Key features include an aluminum construction, IP66 protection rating, and optional hazardous area approval.
1242
This document summarizes a load cell product and provides related specifications and disclaimer information. It describes a Model 1242 aluminum medium capacity single-point load cell that measures between 50-250 kg and has an IP66 rating. It also lists technical specifications for the load cell, dimensions, wiring diagram, and includes a legal disclaimer regarding product information.
MDB
This document contains disclaimers and legal notices from Vishay Precision Group regarding product specifications and liability. It states that all product information and specifications can change without notice, and disclaims liability for errors, inaccuracies, or changes to specifications. It also disclaims warranties or guarantees for specific applications and indemnifies VPG for damages resulting from unsafe uses of products not expressly designed for life-critical applications. The notice serves to inform customers that they are responsible for validating product suitability for their intended use.
1004
This document provides information about the Tedea-Huntleigh Model 1004 aluminum single-point load cell. It is designed for low capacity scales and precision balances, with capacities ranging from 0.3 to 3 kg. The load cell has aluminum construction, IP66 protection, and high precision with total error less than 0.0067% of the rated output. It is suitable for applications such as jewelry scales, pharmaceutical scales, and medical research equipment.
ASC
The document is a technical specification sheet for Vishay Precision Group's Model ASC compression load cell. It describes the key features and specifications of the load cell. The load cell has capacities from 30 to 60 tons, is self-aligning with a single stainless steel column, and is hermetically sealed. It is certified to meet stringent weights and measures requirements. The load cell is suitable for use in weighbridges and silo hopper weighing applications.
DLB
This document summarizes specifications for the Celtron Model DLB Double-Ended Link Shear Beam load cell. It has capacities from 25,000 to 125,000 lbs and is designed for center mounting with a double-linked loading design for free movement in all horizontal directions. Key specifications include NTEP Class III approval, temperature range of -20°C to 60°C, IP67 environmental protection rating, and various accuracy specifications.
SQB-H
This document provides information on the Celtron Model SQB-H hermetically sealed single-ended beam load cell. It summarizes key specifications of the load cell including its capacities from 1k to 10k lbs and 500 to 5000 kg, materials of construction, dimensions, accuracy ratings, temperature ranges, excitation requirements, and IP68 environmental sealing. The load cell is designed for multiple cell applications in platform and small tank scales.
1030
This document summarizes information about the Tedea-Huntleigh Model 1030 low profile single-point load cell. It can measure capacities from 2-15 kg and features an aluminum construction, IP65 protection, and optional hazardous area approval. It is well-suited for bench scales, counting scales, and grocery scales due to its accurate and low-cost design. The document provides specifications, dimensions, wiring diagrams, and other technical details.
5223
This document provides a disclaimer and legal notice regarding product information from Vishay Precision Group. It states that all product specifications and data are subject to change without notice. VPG disclaims liability for errors, inaccuracies, or incomplete information relating to its products. It also disclaims warranties and liability for damages arising from a customer's application or use of VPG products in non-intended ways. The customer is responsible for validating product suitability for their specific application.
1002
This document summarizes the specifications and features of the Tedea-Huntleigh Model 1002 aluminum single-point load cell. Key points include:
- It has capacities from 0.5-20 kg and is suitable for small scales and grocery scales.
- The load cell is made of aluminum, has IP66 protection, and a single-point 200 x 200 mm platform.
- Optional 1000-ohm strain gages make it suitable for battery-powered equipment.
- Typical applications include packing machines, filling machines, and low-force medical applications.
CLB
This document summarizes key information about the Celtron Model CLB double-ended shear beam, including its features, applications, description, dimensions, specifications, and legal disclaimer. The double-ended shear beam is designed for truck, rail, silo, and forklift scales. It has capacities ranging from 20k to 125k lbs and is constructed of alloy steel, fully potted to IP67. Key specifications include accuracy classes, rated outputs, temperature effects, load and overload limits, and operating temperature range.
1010/1015
This document summarizes a load cell model 1010/1015 from Tedea-Huntleigh. It is an aluminum single-point load cell with capacities from 3-90 kg intended for use in bench scales, counting scales, and grocery scales. It has an IP65 rating and EEx ia IIC T4 hazardous area approval is available as an option. Key specifications of the load cell are also provided such as its rated capacity, accuracy, temperature range, overload limits, and wiring configuration.
1330
This document provides information on the Tedea-Huntleigh Model 1330 aluminum single-point load cell. It can measure loads between 500-1000 kg and features an IP66-rated aluminum construction. It is designed to directly mount weighing platforms up to 800 x 800 mm for uses such as floor scales, hanging scales, and check weighing. The document provides specifications, dimensions, wiring diagrams, and other technical details.
CSP-M
The document is a technical specification sheet for the Revere Model CSP-M compression load cell. It provides details on:
- Capacities from 10-100 tons
- IP66 and IP68 sealing for harsh environments
- Certification to OIML R-60 and NTEP standards
- Optional ATEX/FM certification and digital/multiple range versions
- Applications include truck and rail weigh bridges and silo weighing
- Low profile stainless steel construction with four column design for accuracy
1040 1041
The document describes Tedea-Huntleigh's Models 1040 and 1041 low capacity single-point aluminum load cells. The load cells have capacities between 5-100 kg, are made of aluminum, and have IP65 protection rating. They are designed for direct mounting on low cost weighing platforms and are well suited for use in retail, bench, and counting scales. The document provides specifications, dimensions, wiring diagrams, and other details of the load cell models.
Recently uploaded
原版定制(爱大学位证书)英国爱丁堡大学毕业证文凭证书实拍图原版一模一样
原版定制【微信:bwp0011】《(爱大学位证书)英国爱丁堡大学毕业证文凭证书》【微信:bwp0011】成绩单 、雅思、外壳、留信学历认证永久存档查询，采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信bwp0011】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信bwp0011】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
怎么购买澳洲南十字星大学毕业证文凭毕业证原版一模一样
原版一模一样【微信：741003700 】【澳洲南十字星大学毕业证】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Secrets of a Successful Sale: Optimizing Your Checkout Process
https://www.onlineretailtoday.com/frs/26905197/secrets-of-a-successful-sale--optimizing-your-checkout-process
Once upon a time, in the vast realm of online commerce, there lived a humble checkout button overlooked by many. Yet, within its humble click lay the power to transform a mere visitor into a loyal customer. 🧐 💡
Getting checkout right can mark the difference between a successful sale and an abandoned cart, yet many businesses fail to make payments a part of their commerce strategy even when it has a direct impact on revenue. But payments are just one part of a chain. What’s the next touch point? How do you use the data sitting behind a payment to find the next loyal customer?
In this session you’ll learn:
• The integral relationship between payment experience and customer satisfaction
• Proven methods for optimizing the checkout journey
• Leveraging payments data for personalized marketing and enhanced customer loyalty
• Gain invaluable insights into consumer behavior across online and offline channels through data
原版复制澳洲莫纳什大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【澳洲莫纳什大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Charles McClure | Retail Scavenger Hunt |
A presentation of Angelos Cd's and more. This show an EP, LP and the items that the record store carries.
Recently uploaded (7)
Secrets of a Successful Sale: Optimizing Your Checkout Process
Secrets of a Successful Sale: Optimizing Your Checkout Process
121
- 1. Tedea-Huntleigh www.vpgtransducers.com 1 Model 121 Technical contact in Americas: lc.usa@vishaypg.com; Europe: lc.eur@vishaypg.com; Asia: lc.asia@vishaypg.com Document No.: 12076 Revision: 17-Feb-2014 High Capacity Compression Load Cell FEATURES • Capacities: 10T–50T • Stainless steel housing • Surge arrestors fitted • Simple to install • 0.03% total error • 6-wire sense circuit • Output tolerance 0.1% • Optional ❍❍ EEx ia IIC T4—hazardous area approval ❍❍ Anti-rotation groove APPLICATIONS • Truck weighbridges • Silo and hopper weighing • Train “rail” scales • Process weighing DESCRIPTION Model 121 is a high capacity truck scale and silo load cell which is supplied complete with its own unique rocker mounting components. Suitable for all heavy duty weighing applications the 121 gives the user high accuracy and low installation cost. The 121 has a stainless steel housing to protect against corrosion. The alloy steel compression element is nickel plated, and the rocker mounting accessories are zinc plated alloy steel. The two additional sense wires feed back the voltage reaching the load cell. Complete compensation of change in lead resistance due to temperature change and/or cable extension, is achieved by feeding this voltage into the appropriate electronics. OUTLINE DIMENSIONS in millimeters MODEL 121 A A 120 70 30 138.25 11 25 R130 R130 VIEW A-A 5-30ton 10-30 ton 50 ton 70 170.5 138.5 R35 120.3 79 15 25 A A MODEL 121 R150 VIEW A-A 50 ton High Capacity Compression Load Cell
- 2. Tedea-Huntleigh www.vpgtransducers.com 2 Model 121 Technical contact in Americas: lc.usa@vishaypg.com; Europe: lc.eur@vishaypg.com; Asia: lc.asia@vishaypg.com Document No.: 12076 Revision: 17-Feb-2014 High Capacity Compression Load Cell SPECIFICATIONS PARAMETER VALUE UNIT Rated capacity—R.C. (Emax) 10, 20, 30, 50 ton NTEP/OIML Accuracy class Non-Approved Maximum no. of intervals (n) 1000 3000 Y = Emax /Vmin 2000 6000 Rated output—R.O. 1.5 ±mV/V Rated output tolerance 0.0015 ±mV/V Zero balance 0.015 ±mV/V Zero return, 30 min. 0.0500 0.0300 ±% of applied load Total error (per OIML R60) 0.0500 0.0300 ±% of rated output Temperature effect on zero 0.0300 ±% of rated output/°C Temperature range, compensated –10 to +40 °C Temperature range, safe –30 to +70 °C Maximum safe central overload 150 % of R.C. Ultimate central overload 200 % of R.C. Excitation, recommended 10 VDC or VAC RMS Excitation, maximum 24 VDC or VAC RMS Input impedance 670±15 Ω Output impedance 605±5 Ω Insulation resistance >2000 MΩ Cable length 15 m Cable type 6 conductors, 26 AWG, Floating Screen, PVC jacket Standard Construction Stainless steel housing, plated alloy steel element Environmental protection IP68 All specifications subject to change without notice.
- 3. Vishay Precision Group Document No.: 63999 Revision: 27-Apr-2011 www.vishaypg.com 1 Legal Disclaimer Notice Disclaimer Legal Disclaimer Notice Disclaimer Document No.: 63999 Revision: 27-Apr-2011 ALL PRODUCTS, PRODUCT SPECIFICATIONS AND DATA ARE SUBJECT TO CHANGE WITHOUT NOTICE. Vishay Precision Group, Inc., its affiliates, agents, and employees, and all persons acting on its or their behalf (collectively, “Vishay Precision Group”), disclaim any and all liability for any errors, inaccuracies or incompleteness contained herein or in any other disclosure relating to any product. The product specifications do not expand or otherwise modify Vishay Precision Group’s terms and conditions of purchase, including but not limited to, the warranty expressed therein. Vishay Precision Group makes no warranty, representation or guarantee other than as set forth in the terms and conditions of purchase. To the maximum extent permitted by applicable law, Vishay Precision Group disclaims (i) any and all liability arising out of the application or use of any product, (ii) any and all liability, including without limitation special, consequential or incidental damages, and (iii) any and all implied warranties, including warranties of fitness for particular purpose, non-infringement and merchantability. Information provided in datasheets and/or specifications may vary from actual results in different applications and performance may vary over time. Statements regarding the suitability of products for certain types of applications are based on Vishay Precision Group’s knowledge of typical requirements that are often placed on Vishay Precision Group products. It is the customer’s responsibility to validate that a particular product with the properties described in the product specification is suitable for use in a particular application. No license, express, implied, or otherwise, to any intellectual property rights is granted by this document, or by any conduct of Vishay Precision Group. The products shown herein are not designed for use in life-saving or life-sustaining applications unless otherwise expressly indicated. Customers using or selling Vishay Precision Group products not expressly indicated for use in such applications do so entirely at their own risk and agree to fully indemnify Vishay Precision Group for any damages arising or resulting from such use or sale. Please contact authorized Vishay Precision Group personnel to obtain written terms and conditions regarding products designed for such applications. Product names and markings noted herein may be trademarks of their respective owners.