When we begin to come into compatible products industry, there is always a problem that confused us, we are not sure if a device can be compatible with another device in different brands, even after they connected, did not know what would happen, well, this page I will explain the problem with the actual example.

1. Address Common Questions When Using the Compatible Devices
Dell compatible SFP,SFP transceiver,10gbase sfp module
When we begin to come into compatible products industry, there is always a problem that co
another device in different brands, even after they connected, did not know what would hap
example.
For example, we need to connect Dell M6330 blades switches to a HP 2910al by fiber sfp+ ov
module for the 2910al (J9008A), two transceiver modules for the DEll switches (one each) a
connection between the M6220 done well, but when i plug the Dell transceiver into the swit
to work with the Dell transceivers, but there is no event log notice of incompatibility, T
SFP+, or do you know if using non-HP brand SFP+ transceivers will work with the HP transce
sfp
Well, in this issue, If you are indeed using optical transceivers in the switches, then no
switch. Switches only know about the directly connected (plugged-in) transceivers. Now, as
module. HP ProCurve switches will not accept non-HP ProCurve transceivers. So, if you have
2910al, that would be your problem. You are required to obtain HP ProCurve transceivers an
sfp module
In general, we have to say that HP switches do not accept non-hp transceivers, such as Cis
transceiver in a ProCurve switch and expect it to work. Although there is a MSA (Multi Sou
accept non-HP transceivers. Cisco equipment also can only utilize the Cisco SFP module and
in the other module, Cisco port information will be displayed on the Unsupport or unknown.
provide any warranty. In a word, when we choose the device, we just have to choose the sam
Figure shows that the popular compatible module in our Fiberstore.