This Dinan M3 already had a host of goodies before it came to us. The owner is very meticulous and only puts the best parts on his car and wants his car worked on by professionals.As expected, he was on the quest for more performance, so he purchased the Supersprint headers, connecting pipes and x-pipe from our online store and brought the car in to have them installed.Another successful installation and happy customer.

1. www.rpmnorth.com European Car Products, Performance, Repair and maintenance BMW E46 M3 Supersprint Headers, Connecting Pipes and X-Pipe installation in Long Island , New York Phone: (516) 870-0351 E-mail: [email_address] www.rpmnorth.com RPM Racing,120, Fairchild Ave Plainview, NY-11803

2. E-mail: [email_address] This Dinan M3 already had a host of goodies before it came to us. The owner is very meticulous and only puts the best parts on his car and wants his car worked on by professionals.

3. E-mail: [email_address] Here’s the immaculate M3

4. E-mail: [email_address] The Methanol injection kit was installed first while waiting for the headers to arrive. We also downloaded and saved the “tune” from the Dinan ECU flash.

5. E-mail: [email_address] Here’s the Supersprint system laid out. It comes with the hardware and flanges to bolt right up without any cutting or welding.

6. E-mail: [email_address] We then removed the stock headers and connecting pipes.

7. E-mail: [email_address] The engine mount was removed to make room to get the stock headers out and new ones in.

8. E-mail: [email_address] After supporting the engine, the headers were removed and preparation for the new headers began.

9. E-mail: [email_address] Now you can see the differences between the stock exhaust and the Supersprint exhaust.

10. E-mail: [email_address] After swapping the O2 sensors from the stock system over to the Supersprint system, the new system was installed. Note: The Supersprint headers and pipes have ample bungs to accept the O2 sensors in different locations for your convenience.

11. E-mail: [email_address] Everything was bolted up and checked for proper clearances. All O2 sensors were reconnected and the car was started, warmed up and checked for exhaust leaks.

12. E-mail: [email_address] No leaks, no rattles…all looks good. Better yet, sounds great! After all the hardware was installed, we re-tuned the ECU for the increase in boost and new exhaust system. Furthermore, we adjusted the ECU to take care of the check engine lights triggered by the O2 sensors.

13. E-mail: [email_address] … Another successful installation and happy customer.

14. www.rpmnorth.com European Car Products, Performance, Repair and maintenance Phone: (516) 870-0351 E-mail: [email_address] www.rpmnorth.com RPM Racing,120, Fairchild Ave Plainview, NY-11803 We also keep branded aftermarket auto parts with original company warranty. Give your BMW a new LIFE.