Md3
- 1. Answer Key
Refresher 3
e-reviewonline.com Copyright 2010
- 6. 5
On the surface of the shaft
e-reviewonline.com Copyright 2010
- 7. 6
Brown
e-reviewonline.com Copyright 2010
- 8. 7
Nickel
e-reviewonline.com Copyright 2010
- 9. 8
Malleabilizing
e-reviewonline.com Copyright 2010
- 16. 15
0.37/0.44
e-reviewonline.com Copyright 2010
- 17. 16
a4/12
e-reviewonline.com Copyright 2010
- 18. 17
Nickel
e-reviewonline.com Copyright 2010
- 19. 18
SAE 3xxx
e-reviewonline.com Copyright 2010
- 21. 20
Cobalt
e-reviewonline.com Copyright 2010
- 27. 26
All of the above
e-reviewonline.com Copyright 2010
- 28. 27
Arc of recess
e-reviewonline.com Copyright 2010
- 29. 28
SAE 1030
e-reviewonline.com Copyright 2010
- 30. 29
Safety gloves
e-reviewonline.com Copyright 2010
- 37. 36
Embeddability
e-reviewonline.com Copyright 2010
- 38. 37
Lead
e-reviewonline.com Copyright 2010
- 39. 38
Iron
e-reviewonline.com Copyright 2010
- 40. 39
Alloy steel
e-reviewonline.com Copyright 2010
- 42. 41
Blanking
e-reviewonline.com Copyright 2010
- 43. 42
Aluminum
e-reviewonline.com Copyright 2010
- 44. 43
Mechanism
e-reviewonline.com Copyright 2010
- 45. 44
Cubic boron nitride
e-reviewonline.com Copyright 2010
- 50. 51
Collet attachment
e-reviewonline.com Copyright 2010
- 51. 52
Idler
e-reviewonline.com Copyright 2010
- 52. 53
30 years
e-reviewonline.com Copyright 2010
- 53. 54
Higher values
e-reviewonline.com Copyright 2010
- 57. 57 to 58 cont…
e-reviewonline.com Copyright 2010
- 60. 61
Endurance limit
e-reviewonline.com Copyright 2010
- 61. 62
Double VEE block
e-reviewonline.com Copyright 2010
- 62. 63
Basic profile of thread
e-reviewonline.com Copyright 2010
- 63. 64
Buttress
e-reviewonline.com Copyright 2010
- 65. 66
Bilateral tolerance
e-reviewonline.com Copyright 2010
- 70. 71
Bronze rim with cast steel spider
e-reviewonline.com Copyright 2010
- 71. 72
Mps
e-reviewonline.com Copyright 2010
- 72. 73
8 to 12
e-reviewonline.com Copyright 2010
- 76. 76 to 78 cont…
e-reviewonline.com Copyright 2010
- 77. 76 to 78 cont…
e-reviewonline.com Copyright 2010
- 79. 79 to 81 cont…
e-reviewonline.com Copyright 2010
- 80. 79 to 81 cont…
e-reviewonline.com Copyright 2010
- 82. 82 to 83 cont…
e-reviewonline.com Copyright 2010
- 83. 82 to 83 cont…
e-reviewonline.com Copyright 2010
- 84. 84
Oak tanned
e-reviewonline.com Copyright 2010
- 85. 85
Partial quenching
e-reviewonline.com Copyright 2010
- 86. 86
Tempering
e-reviewonline.com Copyright 2010
- 87. 87
Proportional to the modulus of
elasticity and moment of inertia
e-reviewonline.com Copyright 2010
- 89. 93
Safety notices in markers/boards
e-reviewonline.com Copyright 2010
- 90. 94
½
e-reviewonline.com Copyright 2010
- 91. 95
80
e-reviewonline.com Copyright 2010
- 92. 96
Design stress = ultimate stress divided
by factor of safety
e-reviewonline.com Copyright 2010
- 94. 97 to 99 cont…
e-reviewonline.com Copyright 2010
- 95. 100
Planing
e-reviewonline.com Copyright 2010
