V.V.& Sons is the authorized distributor of RCF Loud Speakers and Sub Woofers in UAE and GCC Countries.
Contact Person - Joseph
Email ID - proinfo@vvsons.ae
Contact Number - 0097142684575
College Call Girls New Alipore - For 7001035870 Cheap & Best with original Ph...
RCF speakers
1. RCF 4PRO 5031-A
(Two-way Active speaker system
2x15"+1", 600W)
MRP AED. 6938/ Pc
The 4PRO 5031-A is a self-powered, lightweight two-way full bandwidth
loudspeaker system equipped with two 15” woofers and a 1.75” voice coil
diaphragm, and a 1,7” voice coil diaphagm, compression driver mounted to a
constant directivity horn.
It integrates a 600 Watt digital bi-amplifiication, a complete electronic
processor section and RCF low distortion, high power transducers. The system
is compact and extremely linear and offers the typical balanced sound of high
level two way systems. The 90° angle is wide enough to provide coverage of
an audience when used one per side, yet narrow enough to allow displaying
of multiple enclosures without excessive coverage overlap.
The 4PRO 5031-A is the ideal choice when the application requires high
performance and simple set-up, perfect for main PA, side fills, night clubs and
corporate events.
The new 15” inch, 2,5” voice coil, woofer is the result of the latest
refinementin years of RCF experience in compact speaker design and
manufacture, resulting in an accurate and a tight extended bass. The
compression driver uses a new 1” titanium dome in front of a low
compression, optimised geometry, radial phase plug. This innovative design is
powered from a high flux neodymium magnet offering extreme precision in
high frequency reproduction.
4PRO 5031-A are equipped with a new generation of 600 Watt Digital
Amplifier, 400 Watt for the two woofer and 200 Watt for the compression
driver. The result of this is very high output, extremely low distortion and
an incredible natural sound. The amplifier presents both XLR/jack (Combo)
balanced inputs, XLR output link, volume, a switchable EQ Mode (Contour)
and a mic/line switch. The amplifier features a solid mechanical aluminium
structure which not only stabilize the amplifier during transportation but also
assist in the heat dissipation.
The processor section includes active crossover, system equalization,
transducer phase alignment, limiter and protection functions. The system is
2. visually monitored from 4 status LEDs. All components are housed in a strong
Baltic birch plywood enclosure where high density polystyrene end caps
guarantee the maximum strength.
The front is protected from a strong, powder coated, metal grille. The cabinet
features two comfortable recessed side handles for easy portability.
MAIN FEATURES
• 1200 WATT PEAK, 600 WATT RMS
• 132 dB max spl
• 90 x 60, Wide dispersion constant directivity horn
• 2 x 15” woofer, 2.5” voice coil
• 1” HF driver,1.7” voice coil
Made in ITALY
MAIN APPLICATIONS
• Sound reinforcement systems
• Band and vocal PA
• DJ PA systems
• Small to medium size venue Main PA
RCF 4PRO 8003-AS
(18" Bass reflex Active Sub, 1000W)
MRP AED.8301/ Pc
4PRO 8003-AS active subwoofer integrates an high current 1000 Watt
digital amplifier, a complete electronic processor section and premium RCF
low distortion, high power woofer. The result is a compact, lightweight,
high power subwoofer, unique in his class for extended output and low
distortion. This new high power 18” inch woofer is the result of the latest
refinement in years of RCF experience in compact active subwoofer design
3. and manufacture, providing a fast and controlled reproduction of the bass
frequency range. Featuring a 4” inside/outside voice coil to minimize power
compression and extend the life of this product.
4PRO 8003-AS is equipped with a new generation of 1000 Watt Digital
Amplifier that produce a very high output, an extremely low distortion and an
incredible natural sound. The amplifier features a solid mechanical aluminium
structure which not only stabilize the amplifier during transportation but also
assist in the heat dissipation.
The input section offers mono/stereo combo XLR/Jack input connectors and
XLR high pass output connectors. A recessed master volume, the phase switch
and the selectable crossover frequency switch guarantee the best versatility.
The processor section includes active system equalization, limiter and
protection functions. The system is visually monitored from 4 status LEDs.
The Baltic birch plywood enclosure is painted with black, heavy duty, textured
epoxy. The front is protected from a strong, powder coated, metal grille. The
cabinet features a 35 mm pole mount socket and two comfortable recessed
side handles.
APPLICATIONS
• Live sound reinforcement
• Portable and installed audio-visual systems
• Live theatre and houses of worship
• Auditoriums, retail, ballrooms and night clubs
FEATURES
• High current 1000 watt digital amplifier
• 134 dB max spl
• 18” High power woofer, 4” voice coil
• Xover 80-120 Hz switch, phase switch
• Electronic equalization, limiter and protection
• Mono/stereo combo xlr/jack input, Mono/stereo xlr signal output
• Baltic birch compact enclosure and 2 side handles for easy transportation
• PFC power factor correction
Made in ITALY
RCF ART 312A MKIII
(Active speaker system 12" + 1", 400W RMS)
4. MRP AED. 2850 /Pc
RCF ART 312-A is an active, wide dispersion 2 way sound reinforcement speaker.
It integrates a digital high power 400 Watt amplifier, a multiway DSP section and premium RCF low
distortion, high power transducers. The result is compact, high power accurate systems, unique in
there class for clarity and low distortion.
The total amplifier power is 400 watt RMS: a 300 watt digital amplifier design is used to power the
low frequencies, the compression driver is powered from 100 watt of digital clear power.
The Dsp takes care of low noise crossover, equalisations, soft-limiters, rms limiters, large signals
compression and protection functions.
The input section presents a XLR input connector that is switchable from microphone to line levels. A
master volume control and a useful XLR loop through link guarantee the best versatility.
The new 12” inch woofer is the result of the latest refinement in years of RCF experience in compact
2 way speakers, resulting in a fast and accurate reproduction of the midbass frequency range
and controlled deep bass. The compression driver uses a new 1.5” mylar dome in front of a low
compression, optimised geometry and radial phase plug. This innovative design is powered from a
high flux ferrite magnet and offers a very open and natural midrange sound and extreme precision
in high frequencies reproduction.
All the system is housed in a strong , very lightweight, polypropylene composite enclosure . The
woofer is protected from a strong, powder coated, metal grille. The cabinet features 2 M10 threaded
fly points, a 35 mm stand adaptor plus an ergonomic top handle for easy transportation.
Features
• 400 watt Monolithic bi-amplification, 300 watt low frequency and
100 watt high frequency power
• 128 dB max SPL
• Wide dispersion, 90 x 60 low distortion, constant directivity horn
• 12” high power woofer, 2.5” voice coil
• 1”, mylar dome, high frequency driver
• Electronic equalization, phase alignment, limiter and protection
• Jack/XLR input, XLR signal output
5. • 2 side handles and 1 comfort designed top handle for easy
transportation and positioning
• Four M10 fly points and built in pole mount adaptor
Made in ITALY
Applications
ART 312-A is the optimum choice for live sound situations where an
exceptional full range, outstanding bass reproduction and accurate
high frequency delivery is required. The ART 312-A is also suitable for
monitoring applications.
RCF ART 422A MK ii
(Digital active
speaker system 12" + 2", 400W)
MRP .AED 4584/Pc
RCF ART 422-A MK II is an active, wide dispersion 2 way sound reinforcement
speaker. It integrates a high power 400 watt digital amplifier, a complete
electronic processor section and RCF low distortion, high power transducers.
The system is unique in its class for output and vocal intelligibility.
The new 12” woofer is the result of the latest refinement in year of RCF
experience in compact 2 way speakers. Features a 2,5 ” voice coil, very high
efficiency and controlled bass reproduction.
6. The new 2” neodymium compression driver with a pure titanium dome
developed for the ART 422-A features a complex geometry suspension and
direct drive coil offering a transparent midrange sound and extreme fidelity in
high frequencies reproduction.
RCF ART 422-A MK II is equipped with a new generation of 400 Watt Digital
Amplifier. The result of this is very high output, extremely low distortion
and an incredible natural sound. Each amplifier presents both XLR In/Out
connectors and a Jack input for the maximum connection versatility. An easy
to reach volume knob on the back allows to set the overall volume of the
speaker according to its application. A switchable EQ Mode make it easier
to select among two different equalisation presets: Extended response
switch, which slightly emphasizes the bass response for playback music and
low volume applications or Linear response switch, for using the speaker to
amplify a live mix. 3 status LEDs – Power / Signal / Status are provided for
monitoring the system.
An integrated DSP manages crossover, Eq., soft limiter, compressor and
dynamic bass boost.
ART 4 cabinets are moulded on a special polypropylene composite material
and are designed to dampen down vibrations even at maximum volume
settings. The cabinet shape allows every ART 4 speaker to be used also in
stage monitor configuration At the bottom of the speakers a rugged stainless
steel pole mount has been provided for deploying the speakers on stands or
on subwoofers
The woofer is protected from a strong, powder coated, metal grille. The
cabinet features 2 M10 threaded fly points and an ergonomic top handle for
easy transportation.
MAIN FEATURES
• 400 Watt digital bi-amplification, 300 Watt Low Frequency and 100 Watt
High Frequency Power
• 128 dB max spl
• Wide dispersion 90 x 60 constant directivity horn
• 12” High power woofer, 3” voice coil
• 2” Neodymium high frequency driver , 2.5” voice coil
• Electronic equalization, soft limiter and protection
• Xlr/jack combo input, xlr signal output
• 2 side handles and 1 ergonomic top handle
for easy transportation and positioning
Made in ITALY
MAIN APPLICATIONS
• Live sound reinforcement
• Portable PA
• Frontfill and sidefill
• Houses of worship, auditoriums, retail, clubs, ballrooms, corporate AV, live
theatre, theme parks
• Main vocal monitor
7. RCF AYRA 5
Active 2 way 5" monitoring system - 35W+20W (Studio Monitor)
MRP AED.867/Pc
AYRA 5 is a two-way reference studio monitor that is designed for near field
applications, equally suited to your home recording studio. AYRA 5 features a
high quality 1” soft dome tweeter specially designed on a precision directivity
waveguide and a 5” composite fibreglass woofer. The AYRA Series is
optimized to deliver the best sound for a variety of applications. Whether you
are working with a near field mix at your home studio, you need a clear and
loud sound for your multimedia gaming or simply need some good monitors
for your personal computer.
AYRA 5 is equipped with a new generation of true active 35 W + 20 W class
AB design Amplifier. The result of this is very high output, extremely low
distortion and an incredible natural sound. At the rear panel of the Ayra there
are XLR, Jack & RCA inputs. Input sensitivity control and high frequency trim
knobs and switch for power on/off and selector switch for 115 V or 230 V
operation.
With the reflection free front and the cabinet in lacquer painted medium
density, the Ayra monitor is shaped in a quality and very smooth look.
MAIN FEATURES
• True active 35 W + 20 W class AB design
• 50 Hz – 20.000 Hz frequency response
• Precision directivity tweeter waveguide
• Fully featured input board
• 5” composite fiberglass woofer
• 1” soft dome tweeter
• Reflection free front cabinet design
• Low distortion reflex port
8. MAIN APPLICATIONS
• Home Recording
• Studio Recording
• Personal Monitoring
• DJ Monitoring
• Multimedia
• AV production facilities
RCF AYRA 10 SUB
(Active 10" Studio monitoring sub
200W)
MRP.AED .2044/ Pc
AYRA 10 SUB is a 10” professional subwoofer system that is designed
especially for the AYRA near field active monitors, but works perfectly in other
applications as a stand-alone subwoofer.
The Ayra Sub 10 is the perfect match to the individual models in the Ayra
Series and extends the frequency response of your system, still maintaining
the perfect balance in your mix.
AYRA 10 SUB features a 10” composite fibreglass woofer specially designed
for a low distortion reflex port and a cabinet in lacquer painted medium
density.
AYRA 10 SUB is equipped with a new generation of true active 250 W class
AB design Amplifier. The result of this is very high output, extremely low
distortion and an incredible natural sound. At the rear panel of the Ayra there
are XLR, Jack & RCA inputs. Input sensitivity control and high frequency trim
knobs and switch for power on/off and selector switch for 115 V or 230 V
operation.
MAIN FEATURES
• True active 250 W class AB design
• 35 Hz – 130 Hz frequency response
• Stereo input board, stereo x-over output
• Selectable low pass filter
• 10” composite fibreglass woofer
• Low distortion reflex port
• Lacquer painted medium density cabinet
9. MAIN APPLICATIONS
• Home Recording
• Studio Recording
• Personal Monitoring
• DJ Monitoring
• Multimedia
• AV production facilities
RCF HD10-A
(Digital active speaker system 10" + 1", 600W)
MRP AED 3841/PC
The HD 10-A, with an exceptional full range, is the optimum choice for live
sound and installed situations.
Thanks to its deep bass punch, clean midrange output and accurate high
frequencies, it offers the ultimate intelligibility in vocal and recorded music,
from live sound to playback and from monitoring to fixed installation
applications The concept of this unique speaker derives from the touring
industry, bringing in a compact cabinet all the experience of RCF professional
sound. The new 10” woofer is the result of the latest refinement in year of
RCF experience in compact 2 way speakers. Features a 2,5 ” voice coil, very
high efficiency and controlled bass reproduction.
The 1” compression driver uses a new 1.7” voice coil dome design and
optimised geometry radial phase plug. This innovative design is powered from
a high flux magnet offering a very open and natural midrange sound with
extreme precision in high frequency reproduction.
RCF HD 10-A is equipped with a new generation of 600 Watt Digital
Amplifier. RCF Class-D power amplifiers technology packs huge performance
operating with high efficiency into a lightweight solution. D Line amplifiers
deliverultra fast attack, realistic transient response and impressive audio
performance. The amplifier features a solid mechanical aluminium structure
which not only stabilize the amplifier during transportation but also assist in
10. the heat dissipation. All the D-LINE amplifiers presents SMPS power supply
section in order to produce maximum output and minimum transportation
weight. The integrated DSP manages crossover, equalisation, soft limiter,
compressor and dynamic bass boost. Switchable EQ Mode make it easier to
select among two different equalisation presets: Extended response switch,
which slightly emphasizes the bass response for playback music and low
volume applications and Linear response switch, for using the speaker to
amplify a live mix. A useful Mic/Line switch to adjust the input sensitivity
is provided. When used just for speech, the Mic setting allows to use a
microphone directly with the speaker. Set the selector to Line when using the
speaker for live music or playback.
An easy to reach volume knob on the back allows to set the overall volume of
the speaker according to its application.
3 status LEDs – Power / Signal / Status are provided for monitoring the
system.
D LINE cabinets are moulded on a special polypropylene composite material
designed to dampen down vibrations even at maximum volume settings.
From moulding to the final texture, D LINE offers the maximum reliability and
strength for the intensive use on the road. The reflex porting has been resized
to offer a better efficiency. The HD 10-A is equipped with a top handle and
a side handle with rubber handgrip for greater portability. The new cabinet
shape will allow every D-LINE model to be used in the standard configuration
as well as in stage monitor model. Two M10 and 3 M6 threaded inserts are
provided for optional mounting hardware in Installed Sound Applications.
MAIN APPLICATIONS
• Live Sound
• Rental
• Portable PA
• Stage Monitoring
• Clubs
MAIN FEATURES
• 1200 WATT PEAK, 600 WATT RMS
• Digital Bi-amp
• DSP Sound Processing
• RCF Precision Transducers
• SPL max. 129 dB
Made in ITALY
RCF HD12-A
MRP AED. 4460 /Pc
(Digital active speaker system 12" + 1", 600W)
11. The HD 12-A offers an extremely linear response and a precise, deep low
frequency control. The 12” woofer guarantee a superior sound projection
indoor and outdoor. It is the ideal speaker for main front of house in small PA
systems, for high power monitoring and it is the best solution where higher
power is required for various applications in larger venues. The concept of
this unique speaker derives from the touring industry, bringing in a compact
cabinet all the experience of RCF professional sound.
The new 12” woofer is the result of the latest refinement in year of RCF
experience in compact 2 way speakers. Features a 3 ” voice coil, very high
efficiency and controlled bass reproduction. The 1” compression driver uses a
new 1.7” voice coil dome design and optimised geometry radial phase plug.
This innovative design is powered from a high flux magnet offering a very
open and natural midrange sound with extreme precision in high frequency
reproduction. RCF HD 12-A is equipped with a new generation of 600 Watt
Digital Amplifier. RCF Class-D power amplifiers technology packs huge
performance operating with high efficiency into a lightweight solution. D Line
amplifiers deliver ultra fast attack, realistic transient response and impressive
audio performance. The amplifier features a solid mechanical aluminium
structure which not only stabilize the amplifier during transportation but
also assist in the heat dissipation. All the D-LINE amplifiers presents SMPS
power supply section in order to produce maximum output and minimum
transportation weight. The integrated DSP manages crossover, equalisation,
soft limiter, compressor and dynamic bass boost. Switchable EQ Mode make it
easier to select among two different equalisation presets: Extended response
switch, which slightly emphasizes the bass response for playback music and
low volume applications and Linear response switch, for using the speaker
to amplify a live mix. A useful Mic/Line switch to adjust the input sensitivity
is provided. When used just for speech, the Mic setting allows to use a
microphone directly with the speaker. Set the selector to Line when using the
speaker for live music or playback.
An easy to reach volume knob on the back allows to set the overall volume of
the speaker according to its application.
3 status LEDs – Power / Signal / Status are provided for monitoring the
system.
D LINE cabinets are moulded on a special polypropylene composite material
designed to dampen down vibrations even at maximum volume settings.
From moulding to the final texture, D LINE offers the maximum reliability and
strength for the intensive use on the road. The reflex porting has been resized
to offer a better efficiency. The HD 12-A features 3 ergonomically designed
forged handles with rubber handgrip, 2 on the sides and one at the top. At
the bottom a rugged steel pole mount has been installed in all models. The
new cabinet shape will allow every D-LINE model to be used in the standard
configuration as well as in stage monitor model. Two M10 and 3 M6 threaded
inserts are provided for optional mounting hardware in Installed Sound
Applications.
12. MAIN FEATURES
• 1200 WATT PEAK, 600 WATT RMS
• Digital Bi-amp
• DSP Sound Processing
• RCF Precision Transducers
• SPL max. 130 dB
Made in ITALY
MAIN APPLICATIONS
• Live Sound
• Rental
• Portable PA
• Stage Monitoring
• Clubs
RCF HD32-A
(Digital active speaker system 12" + 3"VC CD, 700W)
MRP AED. 5687 /Pc
The HD 32-A it’s a unique product in his category. The titanium dome,
3.0” voice coil compression driver offers a unique vocal clarity and sound
projection.
At the core of HD 32-A design is the new ND 840 compression driver. The ND
840 large format compression driver delivers one of the key advantages of the
HD32-A, the 3.0” voice coil allows a crossover point of 800Hz and therefore
almost all of the vocal range can be produced by this driver. This allows better
coverage and dispersion control, and superior efficiency. All Compression
drivers and Transducers are precision built taking advantage of RCF’s superior
moulding, assembly technologies and a wealth of professional knowledge
and experience dedicated to achieving extremely high standards
The HD32-A offers an extremely linear response and a precise, deep low
13. frequency control. The 12” woofer guarantee a superior sound projection
indoor and outdoor. It is the ideal speaker for main front of house in small PA
systems, for high power monitoring and it is the best solution where higher
power is required for various applications in larger venues. The concept of
this unique speaker derives from the touring industry, bringing in a compact
cabinet all the experience of RCF professional sound. The new 12” woofer is
the result of the latest refinement in year of RCF experience in compact 2 way
speakers. Features a 3 ” voice coil, very high efficiency and controlled bass
reproduction.
RCF HD32-A is equipped with a new generation of 700 Watt Digital Amplifier.
RCF Class-D power amplifiers technology packs huge performance operating
with high efficiency into a lightweight solution. D Line amplifiers deliver ultra
fast attack, realistic transient response and impressive audio performance.
The amplifier features a solid mechanical aluminium structure which not
only stabilize the amplifier during transportation but also assist in the heat
dissipation.
All the D-LINE amplifiers presents SMPS power supply section in order to
produce maximum output and minimum transportation weight. The integrated
DSP manages crossover, equalisation, soft limiter, compressor and dynamic
bass boost. Switchable EQ Mode make it easier to select among two different
equalisation presets: Extended response switch, which slightly emphasizes
the bass response for playback music and low volume applications and Linear
response switch, for using the speaker to amplify a live mix.
A useful Mic/Line switch to adjust the input sensitivity is provided. When
used just for speech, the Mic setting allows to use a microphone directly with
the speaker. Set the selector to Line when using the speaker for live music or
playback.
An easy to reach volume knob on the back allows to set the overall volume of
the speaker according to its application.
3 status LEDs – Power / Signal / Status are provided for monitoring the
system.
D LINE cabinets are moulded on a special polypropylene composite material
designed to dampen down vibrations even at maximum volume settings.
From moulding to the final texture, D LINE offers the maximum reliability and
strength for the intensive use on the road. The reflex porting has been resized
to offer a better efficiency. The HD32-A features 3 ergonomically designed
forged handles with rubber handgrip, 2 on the sides and one at the top. At
the bottom a rugged steel pole mount has been installed in all models. The
new cabinet shape will allow every D-LINE model to be used in the standard
configuration as well as in stage monitor model. Two M10 and 3 M6 threaded
inserts are provided for optional mounting hardware in Installed Sound
Applications.
MAIN FEATURES
• 1400 Watt
• Digital Bi-amplification
• DSP Sound Processing
• RCF Precision 3.0” voice coil compression driver, titanium dome
• RCF Precision 12” woofer
• 131 dB MAX SPL
• PowerconInput/Output
MAIN APPLICATIONS
• Live Sound
• DJs
• Portable PA
14. • Stage Monitoring
• Clubs
• Voice reinforcement
RCF NX 15-SMA
(ACTIVE COAXIAL STAGE MONITOR
15"+1", 700W)
MRP AED.8549/ Pc
NX Series maximum flexibility philosophy has been maintained for NX15SMA; it is possible, in fact, to use it as a portable PA system, thanks to the
rugged powder coated steel pole mount installed on the side
The newly designed 15”+1” coaxial neodymium transducers guarantee an
outstanding audio quality and definition as well as an extremely lightweight
of the final system
The advantages of the coaxial transducers are the complete absence of
feedback and, thanks to the coherent single spherical wave front with a
perfect dispersion control, a perfect listening in every position.
The design is powered from a large sized single neodymium ring magnet that
provides an extremely high flux density and BL factor.
The new hyper-vented aluminium basket and magnetic assembly design
provide an excellent heat dissipation and lower power compression.
Special air-forced ventilations are provided for voice coil, magnet assembly
and basket.
A 2,5” voice coil combined a strength fibreglass former and aluminium wire
drives the mid-bass cone with high efficiency and a good extension. The 1,7”
dome compression driver, loaded to a 60° conical waveguide, provides a clear
vocal output and a perfect high frequency extension
The NX Coaxial Stage Monitors are provided with brand new digital amplifiers
with powerful DSP processing. The NX 15-SMA is equipped with a 700 W
amplifier, 500 W feed the low frequencies and 200 W are used for the high
frequencies.
In order to control the response of the speakers in such different applications,
RCF has incorporated two special Equalization Modes: Floor, for stage
monitoring and Free Field, for the use of the speakers as a stand-alone PA
system
The input board is fully equipped in order to configure the stage monitors for
any stage situation with XLR Input and Output Link, Jack Input, Volume, Input
Sensitivity Switch, Free Field – Floor Switch, Status LEDs, Powercon AC Input
and Output Link
Cabinets are made in Baltic Birch plywood, finished with an extremely
15. resistant paint for an extensive use on the road. An ergonomic side handle,
integrated with the input panel, is provided for an easier transport.
MAIN APPLICATIONS
• Main vocal stage monitor
• High-output guitar or keyboard monitor
• Main PA in small venues
• Portable and installed audio-visual systems
Made in ITALY
MAIN FEATURES
• 700 Watt digital bi-amplification
• 130 dB max spl
• Wide dispersion 60° x 60° constant directivity horn
• 15” High power neodymium woofer, 2.5” voice coil
• 1,7” kapton dome, 1” exit, neodymium high frequency driver
• DSP processing, boost eq, soft limiter and protection
• Xlr/jack input, xlr signal output
RCF SUB 8004AS
Bass Reflex 18" High Power Active Subwoofer, 1250W RMS
MRP AED.12385/Pc
The SUB 8004-AS is on of the most powerful 18” subwoofers in pro-sound
category. Featuring a high power, hypervented 18” woofer, with 4” inside/
outside voice coils, this cabinet is designed to deliver a serious amount of low
frequency. Powered by a 1250W digital amplifier module, the SUB 8004-AS can
perform in the most demanding situations. The input board includes volume
control, deep/punch switch, high pass switch, phase switch, cardioid, time delay.
The SUB 8004-AS input section includes
Volume control, a Deep / Punch switch;
Signal, Power and Limiter LED’s; High pass
switch; Phase switch; Cardioid switch; Delay
control; Crossover and XLR signal link
16. MAIN FEATURES
2500 Watt
136 dB max SPL
30 Hz - 120 Hz frequency response
18” RCF Precision 4.0” voice coil vented woofer
DSP controlled Input section with selectable presets
On board time delay control
Baltic birch plywood tour grade cabinet
Made in ITALY
APPLICATIONS
• Live sound reinforcement
• Portable and installed audio-visual systems
• Live theatre and houses of worship
• Auditoriums, retail, ballrooms and night clubs
RCF SUB 8006-AS
Double 18" Bass Reflex Active Subwoofer, 2500W
MRP AED.20444/ Pc
The SUB 8006-AS is the largest and most powerful active sub woofer in the
professional series.
Featuring two 18” transducers, with 4” inside/outside voice coils, this
cabinet is designed to delivery a serious amount of low frequency. It is a
direct radiating, high output, large-format sub woofer system proven in
complementing high efficiency, full-range loudspeakers. Driver mounting
maximizes cone area and minimizes frontal area, providing acoustical
performance and physical configuration well suited for creating large
subwoofer arrays.
SUB 8006-AS has been designed to extract the greatest efficiency from every
part of the system, resulting in an effortless reproduction of low frequency
transient response. As a self-powered system, the transducers, amplification
17. and DSP control electronics of the SUB 8006-AS are designed to optimize
performance and maximize its power.
The SUB 8006-AS ‘s efficiently tuned cabinet houses two RCF Precision backvented,
long-excursion, new high power 18” inch cone drivers, providing a
fast and controlled reproduction of the bass frequency range. Featuring a 4”
inside/outside voice coil to minimize power compression and extend the life of
this product.
The drivers have also been engineered for extreme efficiency, using highgauss
ferrite magnets for the most powerful magnetic field strength. High
magnetic field strength increases the driver’s sensitivity, which yields greater
output, while keeping heat dissipation requirements within operational
tolerances.
Powered by a 2500W digital amplifier module, Class-D technology, that packs
huge performance operating with high efficiency into a lightweight solution..
It deliverultra fast attack, realistic transient response and impressive audio
performance. The amplifier features a solid mechanical aluminium structure
which not only stabilize the amplifier during transportation but also assist in
the heat dissipation. The integrated DSP manages equalisation, soft limiter,
compressor and user adjustable settings as deep/boost EQ, Low pass, phase
reverse and a preset for Cardioid setup.
An easy to reach delay knob on the back allows to set the overall delay of the
speaker, in meters, according to its application. 3 status LEDs – Power / Signal
/ Status are provided for monitoring the system
The amplifier features a solid mechanical aluminium structure which not
only stabilize the amplifier during transportation but also assist in the heat
dissipation and, with DSP control electronics and power supply, is integrated
into a single, field-replaceable module mounted in the rear of the cabinet.
The cabinet is constructed of multi-ply hardwood and coated with a textured
black finish. Integral metal grilles lined with acoustical black mesh protect the
cone drivers. Integrated mechanics are for multiple configuration with HDL
MAIN APPLICATIONS
• Live sound
• Rental
• Portable PA, clubs, ballrooms, live theatre
• House of worship
• Theme parks
• Music playback and sound reinforcement in small and mid-size venues
• Corporate A/V professionals and sound system hire companies
MAIN FEATURES
• 5000 Watt Peak power - 2500 Watt RMS
• 141 dB max SPL
• 30 Hz - 120 kHz frequency response
• 2 x 18” Woofer
• DSP controlled Input section with selectable presets
• Delay control
• Integrated mechanics for multiple configuration with HDL 20-A
• Baltic birch tour grade cabinet