1. Schedule Of Materials: W ainscotting
Parts needed for each 4' section:
No. Item Dimensions T W L Material 1 5/8" 3/8"
1⁄
1 Front panel 2" x 46" x 28" * OP
1⁄
2 Inset panels 2" x 191⁄ 4" x 191⁄ 4" OP 1/16"
3⁄ 9⁄
8 Moulding strips 4" x 16" x 20" SO
1⁄
2 Hanging strips 4" x 2" x 46" Ply
1 Base support 3⁄
4" x 21⁄ 2" x 46" P 3/4"
Top 5/8"
1 Base moulding 3⁄
4" x 4" x 46" SO cap
3⁄
1 Top cap 4" x 2" x 46" SO
3⁄ 3⁄
1 Cap cove 4" x 4" x 46" SO 1/16"
*If building a corner, one panel needs to be 463⁄ 4" wide, and a 3" wide
filler needs to be added to the mating panel.
OP=Oak ply • SO=Solid oak • Ply= Plywood • P=Poplar Hanging Front
strip panel
1/4"
Stock 3/4" x 3/4"
4 1/4" cove moulding
1/4"
Front panel 1/8"
Inset Inset Inset
panel panel panel
Stock
19 1/4" moulding strips
with rabbeted
edge
Front panel
Inset Inset
panel panel 1/8"
32" Front
panel
7/16" 5/16"
Front panel
4 1/4"
Inset Inset
panel 3/8"
panel Hanging
1/4"
strip
4' x 8' sheet
of 1/2" oak plywood
Base Base
2 1/2" Support Moulding
with ogee 3 5/8"
profile
3/4"