The document provides safety information and instructions for operating a Daewoo excavator, including:
1. Locations of safety labels on the excavator that warn of hazards.
2. Precautions for lifting loads, such as ensuring the load is balanced before lifting and avoiding sudden movements.
3. General safety hazards like working near power lines, hot surfaces, and rotating equipment.
4. Proper procedures for starting the engine, operating controls, and parking the excavator.
5. Maintenance safety like allowing hot fluids to cool before servicing, and procedures for working with batteries and accumulators.
Daewoo doosan solar 470 lc v excavator operator and maintenance manualsoeldksejdksem
1. The document provides safety information and instructions for operating a Daewoo excavator.
2. It identifies the location of various safety labels on the excavator and explains their meanings.
3. Operators and maintenance personnel are instructed to read the manual thoroughly before operating or servicing the excavator to avoid accidents.
Daewoo doosan solar 225 lc v excavator operator and maintenance manualfjskekxcddmmme
This document is an operation and maintenance manual for a Daewoo Solar 225LC-V excavator from 2003. It provides information on operating controls and components, safety procedures, maintenance schedules and tasks, troubleshooting, specifications, and transportation of the excavator. Daewoo reserves the right to improve their products at any time without obligation to update previously sold models. Owners should periodically check for updated documentation from their distributor. Illustrations in the manual are representational and may differ from the actual excavator.
Komatsu D375A-5E0 Dozer Bulldozer Service Repair Manual S/N 50001 and uphdksemmme
This is the Highly Detailed factory service repair manual for theKOMATSU D375A-5E0 DOZER BULLDOZER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KOMATSU D375A-5E0 DOZER BULLDOZER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Index and Foreword
Specification
Structure, Function and Maintenance Standard
Standard Value Table
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Diagrams and Drawings
+++++Field Assembly Instruction
Manual Covers:
Specifications
Precautions for Field Assembly
Disposal of Removed Parts
Assembly Procedure, Necessary Equipment, and Schedule
Layout of Kit
Style for Transportation
Table of Tools for Field Assembly
Tightening Torque
Coating Materials List
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveKOMATSU D375A-5E0 DOZER BULLDOZER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
This operation and maintenance manual provides instructions for the DOOSAN DX480LC and DX520LC excavators. It covers safety procedures, operational controls, operation techniques, maintenance schedules, troubleshooting, specifications, and other important information. DOOSAN reserves the right to improve its products and recommends periodically checking for updated documentation. Illustrations are representative and may vary from actual equipment.
This document provides product information for Gree Commercial Air Condition Modular D.C. Inverter Multi VRF systems. It lists the models, capacities, refrigerants, power supplies, and appearance of outdoor units and various indoor unit types, including duct, cassette, floor/ceiling, and wall-mounted units. It also covers the units' functions, product data like specifications and operation ranges, piping diagrams, and control features.
Daewoo Doosan Solar 470LC-V Excavator Operator and Maintenance manualfudjjjskeskmmd
1. The document provides safety information and instructions for operating a Daewoo excavator.
2. It identifies the location of various safety labels on the excavator and explains their meanings.
3. Operators and maintenance personnel are instructed to read the manual thoroughly before operating or servicing the excavator to avoid accidents.
Daewoo doosan solar 470 lc v excavator operator and maintenance manualfhsejkdkmem
1. The document provides safety information and instructions for operating a Daewoo excavator.
2. It identifies the location of various safety labels on the excavator and explains their meanings.
3. Operators and maintenance personnel are instructed to read the manual thoroughly before operating or servicing the excavator to avoid accidents.
Daewoo doosan solar 470 lc v excavator operator and maintenance manualidkkdmmdd
1. The document provides safety information and instructions for operating a Daewoo excavator.
2. It identifies the location of various safety labels on the excavator and explains their meanings.
3. Operators and maintenance personnel are instructed to read the manual thoroughly before operating or servicing the excavator to avoid accidents.
Daewoo doosan solar 470 lc v excavator operator and maintenance manualsoeldksejdksem
1. The document provides safety information and instructions for operating a Daewoo excavator.
2. It identifies the location of various safety labels on the excavator and explains their meanings.
3. Operators and maintenance personnel are instructed to read the manual thoroughly before operating or servicing the excavator to avoid accidents.
Daewoo doosan solar 225 lc v excavator operator and maintenance manualfjskekxcddmmme
This document is an operation and maintenance manual for a Daewoo Solar 225LC-V excavator from 2003. It provides information on operating controls and components, safety procedures, maintenance schedules and tasks, troubleshooting, specifications, and transportation of the excavator. Daewoo reserves the right to improve their products at any time without obligation to update previously sold models. Owners should periodically check for updated documentation from their distributor. Illustrations in the manual are representational and may differ from the actual excavator.
Komatsu D375A-5E0 Dozer Bulldozer Service Repair Manual S/N 50001 and uphdksemmme
This is the Highly Detailed factory service repair manual for theKOMATSU D375A-5E0 DOZER BULLDOZER, this Service Manual has detailed illustrations as well as step by step instructions,It is 100 percents complete and intact. they are specifically written for the do-it-yourself-er as well as the experienced mechanic.KOMATSU D375A-5E0 DOZER BULLDOZER Service Repair Workshop Manual provides step-by-step instructions based on the complete dis-assembly of the machine. It is this level of detail, along with hundreds of photos and illustrations, that guide the reader through each service and repair procedure. Complete download comes in pdf format which can work under all PC based windows operating system and Mac also, All pages are printable. Using this repair manual is an inexpensive way to keep your vehicle working properly.
Service Repair Manual Covers:
Index and Foreword
Specification
Structure, Function and Maintenance Standard
Standard Value Table
Testing and Adjusting
Troubleshooting
Disassembly and Assembly
Diagrams and Drawings
+++++Field Assembly Instruction
Manual Covers:
Specifications
Precautions for Field Assembly
Disposal of Removed Parts
Assembly Procedure, Necessary Equipment, and Schedule
Layout of Kit
Style for Transportation
Table of Tools for Field Assembly
Tightening Torque
Coating Materials List
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
NO waiting, Buy from responsible seller and get INSTANT DOWNLOAD, Without wasting your hard-owned money on uncertainty or surprise! All pages are is great to haveKOMATSU D375A-5E0 DOZER BULLDOZER Service Repair Workshop Manual.
Looking for some other Service Repair Manual,please check:
https://www.aservicemanualpdf.com/
Thanks for visiting!
8
This operation and maintenance manual provides instructions for the DOOSAN DX480LC and DX520LC excavators. It covers safety procedures, operational controls, operation techniques, maintenance schedules, troubleshooting, specifications, and other important information. DOOSAN reserves the right to improve its products and recommends periodically checking for updated documentation. Illustrations are representative and may vary from actual equipment.
This document provides product information for Gree Commercial Air Condition Modular D.C. Inverter Multi VRF systems. It lists the models, capacities, refrigerants, power supplies, and appearance of outdoor units and various indoor unit types, including duct, cassette, floor/ceiling, and wall-mounted units. It also covers the units' functions, product data like specifications and operation ranges, piping diagrams, and control features.
Daewoo Doosan Solar 470LC-V Excavator Operator and Maintenance manualfudjjjskeskmmd
1. The document provides safety information and instructions for operating a Daewoo excavator.
2. It identifies the location of various safety labels on the excavator and explains their meanings.
3. Operators and maintenance personnel are instructed to read the manual thoroughly before operating or servicing the excavator to avoid accidents.
Daewoo doosan solar 470 lc v excavator operator and maintenance manualfhsejkdkmem
1. The document provides safety information and instructions for operating a Daewoo excavator.
2. It identifies the location of various safety labels on the excavator and explains their meanings.
3. Operators and maintenance personnel are instructed to read the manual thoroughly before operating or servicing the excavator to avoid accidents.
Daewoo doosan solar 470 lc v excavator operator and maintenance manualidkkdmmdd
1. The document provides safety information and instructions for operating a Daewoo excavator.
2. It identifies the location of various safety labels on the excavator and explains their meanings.
3. Operators and maintenance personnel are instructed to read the manual thoroughly before operating or servicing the excavator to avoid accidents.
Daewoo Doosan Solar 470LC-V Excavator Operator and Maintenance manualudfjjdfjkksekm
This is the most complete Operation and Maintenance Manual for the DAEWOO DOOSAN SOLAR 470LC-V EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your DAEWOO DOOSAN SOLAR 470LC-V EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of DAEWOO DOOSAN SOLAR 470LC-V EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Operating Controls
Operation
Inspection, Maintenance and Adjustment
Transportation
Troubleshooting
Specification
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
Daewoo doosan solar 470 lc v excavator operator and maintenance manualfhsjekkdkem
1. The safety manual provides important safety information for operating and maintaining the excavator.
2. Safety labels are located throughout the excavator and identify specific hazards. Operators must be familiar with the safety labels and their meanings.
3. Precautions must be taken when lifting loads in digging mode, including evaluating ground support and the excavator configuration.
Daewoo doosan solar 225 lc v excavator operator and maintenance manualcdfzxs
1. The document is an operation and maintenance manual for a Daewoo excavator that contains safety information and instructions.
2. It warns of serious injury or death risks from unsafe excavator operation and maintenance, and emphasizes the importance of understanding all safety procedures before working on the machine.
3. The manual identifies the locations of various safety labels on the excavator that provide warnings for specific hazards like high voltage, rotating parts, hot surfaces, and proper lifting procedures.
Daewoo doosan solar 225 lc v excavator operator and maintenance manualdueikdkmem
1. The document is an operation and maintenance manual for a Daewoo excavator that contains safety information and instructions.
2. It warns of serious injury or death risks from unsafe excavator operation and maintenance, and emphasizes the importance of understanding all safety procedures before working on the machine.
3. The manual identifies the locations of various safety labels on the excavator that provide warnings for hazards like high voltage, rotating parts, hot surfaces, and proper lifting procedures.
Daewoo Doosan Solar 225LC-V Excavator Operator and Maintenance manualdufjdjskkemm
This is the most complete Operation and Maintenance Manual for the DAEWOO DOOSAN SOLAR 225LC-V EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your DAEWOO DOOSAN SOLAR 225LC-V EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of DAEWOO DOOSAN SOLAR 225LC-V EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Operating Controls
Operation
Inspection, Maintenance and Adjustment
Transportation
Troubleshooting
Specification
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
Daewoo doosan solar 225 lc v excavator operator and maintenance manualikdkdmdm
1. The document is an operation and maintenance manual for a Daewoo excavator that contains safety information and warnings.
2. It warns that unsafe use of the excavator could lead to serious injury or death and instructs operators and maintenance personnel to thoroughly read the manual before use or maintenance.
3. The manual outlines the location of various safety labels on the excavator and provides descriptions of the hazards indicated by each label. It emphasizes the importance of keeping safety labels legible.
Nissan forklift internal combustion j02 series service repair manualolfjsekdmmes
This document provides service information for automatic transmissions in the J01 and J02 model series, including:
- Specifications for transmission components like clutches, gear ratios, oil pump parameters, and torque converter specs.
- Inspection and adjustment procedures for parts like the torque converter, transmission, and oil pump.
- Troubleshooting guidance for common issues like low output, high temperatures, noise, and oil leaks. Causes and fixes are outlined.
- Diagrams of the transmission oil circuit through the torque converter, control valve body, and to clutches to illustrate oil flow.
Nissan forklift internal combustion j01 series service repair manualolfjsekdmmes
This document provides service information for automatic transmissions in model J01-J02 series vehicles, including:
- Specifications for transmission components like the torque converter and clutches.
- Inspection and adjustment procedures for parts like the torque converter and transmission gears.
- Troubleshooting guidance for common issues like low output, high temperatures, noise, and oil leaks. Causes and fixes are outlined.
- Diagrams of the transmission oil circuit in different operating ranges to illustrate oil flow and pressure control components.
Nissan forklift internal combustion f03 series service repair manualolfjsekdmmes
This document provides an introduction and overview of the service manual for the NISSAN FORKLIFT F03 series. It consists of 21 sections covering various systems including the engine lubrication system. The engine lubrication system section (EL) contains information on the lubrication circuit, oil pump, oil filter, service specifications, troubleshooting, and maintenance procedures. The lubrication system uses a pressed feed flow design with a spur gear type oil pump. The manual provides specifications for oil capacity, tightening torques, and inspection/clearance measurements. It describes procedures for removing and installing the oil pump and replacing the oil filter.
Mc cormick x10 series (2011 ) - rpk1 - x10.50h-eu tractor parts catalogue ma...olfjsekdmmes
The document provides the parts list for a Daedong X10 tractor. It includes 23 individual parts with descriptions and part numbers. The parts are for various components of the tractor including the engine, transmission, hydraulics, and other systems. The document also specifies that it is for the X10 series tractor from 2011 for the RPK1 model X10.50H-EU.
Massey ferguson mf 274 s tractor parts catalogue manualolfjsekdmmes
This document provides a parts list for a Massey Ferguson 274 S tractor. It contains over 60 items numbered in sequence, each with a corresponding part number, quantity, description, and sometimes additional part number variants or comments. The parts are grouped into sections related to the cylinder block, crankshaft, cylinder head cover, rocker arm, timing gear, and lubricating oil system.
Massey ferguson mf 274 cf crawler parts catalogue manualolfjsekdmmes
The document provides parts information for a Massey Ferguson MF 274 CF Crawler engine. It includes detailed lists of parts with part numbers for the engine block, crankshaft, pistons, cylinder head, rocker shaft, timing gear and camshaft. Over 100 individual part items are specified across 6 pages of technical documentation for the engine.
Massey ferguson mf 264 t cf crawler parts catalogue manualolfjsekdmmes
The document provides parts information for the engine of a Massey Ferguson MF 264 T CF Crawler tractor. It includes detailed lists of parts for various engine systems like the cylinder block, crankshaft, pistons, cylinder head, rocker shaft, and timing gear/camshaft. Each part is given an item number, part number, quantity, description, and any relevant comments. The lists contain over 60 individual engine part items and their corresponding information.
Massey ferguson mf 254 tractor, 22210641 parts catalogue manualolfjsekdmmes
This document provides parts information for the lubricating oil system of a Massey Ferguson MF 254 tractor. It contains a table listing 60 parts related to the lubricating oil system, including the sump, joints, bolts, washers, plug, gasket, oil pump, plunger, spring, cap, pin and gear. It also provides item numbers, part numbers, quantities and short descriptions for each part. The purpose is to provide an exploded parts diagram and details for the tractor's lubricating oil system.
Massey ferguson mf 254 s tractor parts catalogue manualolfjsekdmmes
This document provides parts information for a Massey Ferguson MF 254 S tractor. It includes 3 pages of documentation listing over 60 individual parts related to the cylinder block, such as cylinders, plugs, dowels, seals, housings and more. Each part is listed with its part number, quantity used, description, and any additional comments.
Massey ferguson mf 254 cf crawler parts catalogue manualolfjsekdmmes
The document provides parts information for the engine of a Massey Ferguson 254 CF crawler tractor. It includes multiple pages detailing individual engine parts like the cylinder block, crankshaft, pistons, cylinder head, timing gears and camshaft. Each part lists the part number, quantity, description, and any relevant comments. The document aims to provide all necessary part numbers and details to service and repair the engine.
Massey ferguson mf 234 s tractor parts catalogue manualolfjsekdmmes
This document provides a parts list for a Massey Ferguson 234 S tractor engine. It includes over 60 items such as the cylinder block, crankshaft, cylinder head, timing gears, rocker arm, and lubricating oil system parts. Each item lists the part number, quantity, description, and any relevant comments. The parts are grouped into relevant sub-assemblies of the engine.
Massey ferguson mf 234 cf crawler parts catalogue manualolfjsekdmmes
This document contains parts lists and diagrams for the engine of a Massey Ferguson 234 CF crawler tractor. It includes lists of parts for the engine cylinder block, crankshaft, pistons, connecting rods, cylinder head, rocker shaft, timing gear, and camshaft. Diagrams show the layout and components of these engine systems.
Massey ferguson mf 206 combine parts catalogue manualolfjsekdmmes
This document provides parts information for the Massey Ferguson MF 206 combine. It includes detailed lists of parts for various systems on the combine including the knife drive, wobble drive, reduction system, reel drive, and reel carrier. Each part is identified by number, quantity required, description, and any relevant comments. The parts lists contain over 30 individual items and correspond to reference pages within the document.
Massey ferguson mf 194 s tractor parts catalogue manualolfjsekdmmes
This document provides a parts list and technical specifications for a Massey Ferguson MF 194 S tractor. It includes over 50 individual parts listed with their part numbers, quantities, descriptions, and other relevant details. The parts are grouped into sections covering the cylinder block, crankshaft and flywheel, cylinder head and cover, rocker arm, timing gear, and oil sump systems.
Massey ferguson mf 194 f tractor parts catalogue manualolfjsekdmmes
This document provides the parts list and assembly details for the cylinder block, crankshaft and flywheel, cylinder head and cover, rocker arm, and timing gear components of a Massey Ferguson MF 194 F tractor with serial number 3310634. It includes over 50 numbered items with corresponding part numbers, quantities, descriptions, and other assembly notes for each component.
Massey ferguson mf 184 s tractor parts catalogue manualolfjsekdmmes
This document provides parts information for repairing a Massey Ferguson MF 184 S tractor. It includes exploded diagrams and lists of parts needed for the cylinder block, crankshaft, cylinder head, rocker arm, timing gear, and lubricating oil sump. Each item is accompanied by the part number, quantity needed, description, and any relevant comments. The document contains detailed technical specifications for repairing various engine components.
More Related Content
Similar to Daewoo doosan solar 300 lc v excavator operation and maintenance manual
Daewoo Doosan Solar 470LC-V Excavator Operator and Maintenance manualudfjjdfjkksekm
This is the most complete Operation and Maintenance Manual for the DAEWOO DOOSAN SOLAR 470LC-V EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your DAEWOO DOOSAN SOLAR 470LC-V EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of DAEWOO DOOSAN SOLAR 470LC-V EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Operating Controls
Operation
Inspection, Maintenance and Adjustment
Transportation
Troubleshooting
Specification
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
Daewoo doosan solar 470 lc v excavator operator and maintenance manualfhsjekkdkem
1. The safety manual provides important safety information for operating and maintaining the excavator.
2. Safety labels are located throughout the excavator and identify specific hazards. Operators must be familiar with the safety labels and their meanings.
3. Precautions must be taken when lifting loads in digging mode, including evaluating ground support and the excavator configuration.
Daewoo doosan solar 225 lc v excavator operator and maintenance manualcdfzxs
1. The document is an operation and maintenance manual for a Daewoo excavator that contains safety information and instructions.
2. It warns of serious injury or death risks from unsafe excavator operation and maintenance, and emphasizes the importance of understanding all safety procedures before working on the machine.
3. The manual identifies the locations of various safety labels on the excavator that provide warnings for specific hazards like high voltage, rotating parts, hot surfaces, and proper lifting procedures.
Daewoo doosan solar 225 lc v excavator operator and maintenance manualdueikdkmem
1. The document is an operation and maintenance manual for a Daewoo excavator that contains safety information and instructions.
2. It warns of serious injury or death risks from unsafe excavator operation and maintenance, and emphasizes the importance of understanding all safety procedures before working on the machine.
3. The manual identifies the locations of various safety labels on the excavator that provide warnings for hazards like high voltage, rotating parts, hot surfaces, and proper lifting procedures.
Daewoo Doosan Solar 225LC-V Excavator Operator and Maintenance manualdufjdjskkemm
This is the most complete Operation and Maintenance Manual for the DAEWOO DOOSAN SOLAR 225LC-V EXCAVATOR . Operation and Maintenance Manual can come in handy especially when you have to do immediate repair to your DAEWOO DOOSAN SOLAR 225LC-V EXCAVATOR .Operation and Maintenance Manual comes with comprehensive details regarding technical data. Diagrams a complete list of DAEWOO DOOSAN SOLAR 225LC-V EXCAVATOR parts and is a must for the will not be dissatisfied.
Operation Manual Covers:
Safety
Operating Controls
Operation
Inspection, Maintenance and Adjustment
Transportation
Troubleshooting
Specification
Index
File Format: PDF
Compatible: All Versions of Windows & Mac
Language: English
Requirements: Adobe PDF Reader
All pages are run off what you need & take it with you into the garage or save money $$ By doing your own repairs!These manuals make it easy for any skill level with these very easy to by step instructions!
Thanks for visiting!
Daewoo doosan solar 225 lc v excavator operator and maintenance manualikdkdmdm
1. The document is an operation and maintenance manual for a Daewoo excavator that contains safety information and warnings.
2. It warns that unsafe use of the excavator could lead to serious injury or death and instructs operators and maintenance personnel to thoroughly read the manual before use or maintenance.
3. The manual outlines the location of various safety labels on the excavator and provides descriptions of the hazards indicated by each label. It emphasizes the importance of keeping safety labels legible.
Similar to Daewoo doosan solar 300 lc v excavator operation and maintenance manual (6)
Nissan forklift internal combustion j02 series service repair manualolfjsekdmmes
This document provides service information for automatic transmissions in the J01 and J02 model series, including:
- Specifications for transmission components like clutches, gear ratios, oil pump parameters, and torque converter specs.
- Inspection and adjustment procedures for parts like the torque converter, transmission, and oil pump.
- Troubleshooting guidance for common issues like low output, high temperatures, noise, and oil leaks. Causes and fixes are outlined.
- Diagrams of the transmission oil circuit through the torque converter, control valve body, and to clutches to illustrate oil flow.
Nissan forklift internal combustion j01 series service repair manualolfjsekdmmes
This document provides service information for automatic transmissions in model J01-J02 series vehicles, including:
- Specifications for transmission components like the torque converter and clutches.
- Inspection and adjustment procedures for parts like the torque converter and transmission gears.
- Troubleshooting guidance for common issues like low output, high temperatures, noise, and oil leaks. Causes and fixes are outlined.
- Diagrams of the transmission oil circuit in different operating ranges to illustrate oil flow and pressure control components.
Nissan forklift internal combustion f03 series service repair manualolfjsekdmmes
This document provides an introduction and overview of the service manual for the NISSAN FORKLIFT F03 series. It consists of 21 sections covering various systems including the engine lubrication system. The engine lubrication system section (EL) contains information on the lubrication circuit, oil pump, oil filter, service specifications, troubleshooting, and maintenance procedures. The lubrication system uses a pressed feed flow design with a spur gear type oil pump. The manual provides specifications for oil capacity, tightening torques, and inspection/clearance measurements. It describes procedures for removing and installing the oil pump and replacing the oil filter.
Mc cormick x10 series (2011 ) - rpk1 - x10.50h-eu tractor parts catalogue ma...olfjsekdmmes
The document provides the parts list for a Daedong X10 tractor. It includes 23 individual parts with descriptions and part numbers. The parts are for various components of the tractor including the engine, transmission, hydraulics, and other systems. The document also specifies that it is for the X10 series tractor from 2011 for the RPK1 model X10.50H-EU.
Massey ferguson mf 274 s tractor parts catalogue manualolfjsekdmmes
This document provides a parts list for a Massey Ferguson 274 S tractor. It contains over 60 items numbered in sequence, each with a corresponding part number, quantity, description, and sometimes additional part number variants or comments. The parts are grouped into sections related to the cylinder block, crankshaft, cylinder head cover, rocker arm, timing gear, and lubricating oil system.
Massey ferguson mf 274 cf crawler parts catalogue manualolfjsekdmmes
The document provides parts information for a Massey Ferguson MF 274 CF Crawler engine. It includes detailed lists of parts with part numbers for the engine block, crankshaft, pistons, cylinder head, rocker shaft, timing gear and camshaft. Over 100 individual part items are specified across 6 pages of technical documentation for the engine.
Massey ferguson mf 264 t cf crawler parts catalogue manualolfjsekdmmes
The document provides parts information for the engine of a Massey Ferguson MF 264 T CF Crawler tractor. It includes detailed lists of parts for various engine systems like the cylinder block, crankshaft, pistons, cylinder head, rocker shaft, and timing gear/camshaft. Each part is given an item number, part number, quantity, description, and any relevant comments. The lists contain over 60 individual engine part items and their corresponding information.
Massey ferguson mf 254 tractor, 22210641 parts catalogue manualolfjsekdmmes
This document provides parts information for the lubricating oil system of a Massey Ferguson MF 254 tractor. It contains a table listing 60 parts related to the lubricating oil system, including the sump, joints, bolts, washers, plug, gasket, oil pump, plunger, spring, cap, pin and gear. It also provides item numbers, part numbers, quantities and short descriptions for each part. The purpose is to provide an exploded parts diagram and details for the tractor's lubricating oil system.
Massey ferguson mf 254 s tractor parts catalogue manualolfjsekdmmes
This document provides parts information for a Massey Ferguson MF 254 S tractor. It includes 3 pages of documentation listing over 60 individual parts related to the cylinder block, such as cylinders, plugs, dowels, seals, housings and more. Each part is listed with its part number, quantity used, description, and any additional comments.
Massey ferguson mf 254 cf crawler parts catalogue manualolfjsekdmmes
The document provides parts information for the engine of a Massey Ferguson 254 CF crawler tractor. It includes multiple pages detailing individual engine parts like the cylinder block, crankshaft, pistons, cylinder head, timing gears and camshaft. Each part lists the part number, quantity, description, and any relevant comments. The document aims to provide all necessary part numbers and details to service and repair the engine.
Massey ferguson mf 234 s tractor parts catalogue manualolfjsekdmmes
This document provides a parts list for a Massey Ferguson 234 S tractor engine. It includes over 60 items such as the cylinder block, crankshaft, cylinder head, timing gears, rocker arm, and lubricating oil system parts. Each item lists the part number, quantity, description, and any relevant comments. The parts are grouped into relevant sub-assemblies of the engine.
Massey ferguson mf 234 cf crawler parts catalogue manualolfjsekdmmes
This document contains parts lists and diagrams for the engine of a Massey Ferguson 234 CF crawler tractor. It includes lists of parts for the engine cylinder block, crankshaft, pistons, connecting rods, cylinder head, rocker shaft, timing gear, and camshaft. Diagrams show the layout and components of these engine systems.
Massey ferguson mf 206 combine parts catalogue manualolfjsekdmmes
This document provides parts information for the Massey Ferguson MF 206 combine. It includes detailed lists of parts for various systems on the combine including the knife drive, wobble drive, reduction system, reel drive, and reel carrier. Each part is identified by number, quantity required, description, and any relevant comments. The parts lists contain over 30 individual items and correspond to reference pages within the document.
Massey ferguson mf 194 s tractor parts catalogue manualolfjsekdmmes
This document provides a parts list and technical specifications for a Massey Ferguson MF 194 S tractor. It includes over 50 individual parts listed with their part numbers, quantities, descriptions, and other relevant details. The parts are grouped into sections covering the cylinder block, crankshaft and flywheel, cylinder head and cover, rocker arm, timing gear, and oil sump systems.
Massey ferguson mf 194 f tractor parts catalogue manualolfjsekdmmes
This document provides the parts list and assembly details for the cylinder block, crankshaft and flywheel, cylinder head and cover, rocker arm, and timing gear components of a Massey Ferguson MF 194 F tractor with serial number 3310634. It includes over 50 numbered items with corresponding part numbers, quantities, descriptions, and other assembly notes for each component.
Massey ferguson mf 184 s tractor parts catalogue manualolfjsekdmmes
This document provides parts information for repairing a Massey Ferguson MF 184 S tractor. It includes exploded diagrams and lists of parts needed for the cylinder block, crankshaft, cylinder head, rocker arm, timing gear, and lubricating oil sump. Each item is accompanied by the part number, quantity needed, description, and any relevant comments. The document contains detailed technical specifications for repairing various engine components.
Massey ferguson mf 184 f tractor parts catalogue manualolfjsekdmmes
This document provides a list of parts for a Massey Ferguson MF 184 F tractor. It includes over 50 individual parts listed with their part numbers, quantities, descriptions, and other relevant information. The parts are grouped into sections for the cylinder block, crankshaft, cylinder head, rocker arm, timing gear, and other components.
Massey ferguson mf 174 s tractor parts catalogue manualolfjsekdmmes
This document provides a list of parts for a Massey Ferguson MF 174 S tractor engine. It includes 52 numbered items with descriptions of cylinders, pistons, crankshafts, heads, valves, gears, and other engine components. Each item lists the part number, quantity, description, and any relevant comments on serial numbers or specifications. The list is organized by component type and provides the information needed to service or repair the engine.
Massey ferguson mf 174 f tractor parts catalogue manualolfjsekdmmes
This document provides the parts list and exploded diagrams for the Massey Ferguson MF 174 F tractor with serial number 3310632. It includes lists of parts needed to repair or replace components of the cylinder block, crankshaft and flywheel, cylinder head and cover, rocker arm, timing gear, and other systems. The parts are identified by item number, part number, quantity, description, and other identifying information to aid in maintenance and repair of this tractor model.
Kubota bx23 d tractor parts catalogue manualolfjsekdmmes
The document provides instructions and part listings for a parts book. It defines the column headings used in parts number pages, including reference number, part number, description, quantity, serial number range, interchangeability, and remarks. It then provides a sample page from the parts book that lists over 200 individual part numbers for an engine, along with the corresponding information for each part. The document also notes that country codes may be included to indicate if a part differs in other countries.
Welcome to ASP Cranes, your trusted partner for crane solutions in Raipur, Chhattisgarh! With years of experience and a commitment to excellence, we offer a comprehensive range of crane services tailored to meet your lifting and material handling needs.
At ASP Cranes, we understand the importance of reliable and efficient crane operations in various industries, from construction and manufacturing to logistics and infrastructure development. That's why we strive to deliver top-notch solutions that enhance productivity, safety, and cost-effectiveness for our clients.
Our services include:
Crane Rental: Whether you need a crawler crane for heavy lifting or a hydraulic crane for versatile operations, we have a diverse fleet of well-maintained cranes available for rent. Our rental options are flexible and can be customized to suit your project requirements.
Crane Sales: Looking to invest in a crane for your business? We offer a wide selection of new and used cranes from leading manufacturers, ensuring you find the perfect equipment to match your needs and budget.
Crane Maintenance and Repair: To ensure optimal performance and safety, regular maintenance and timely repairs are essential for cranes. Our team of skilled technicians provides comprehensive maintenance and repair services to keep your equipment running smoothly and minimize downtime.
Crane Operator Training: Proper training is crucial for safe and efficient crane operation. We offer specialized training programs conducted by certified instructors to equip operators with the skills and knowledge they need to handle cranes effectively.
Custom Solutions: We understand that every project is unique, which is why we offer custom crane solutions tailored to your specific requirements. Whether you need modifications, attachments, or specialized equipment, we can design and implement solutions that meet your needs.
At ASP Cranes, customer satisfaction is our top priority. We are dedicated to delivering reliable, cost-effective, and innovative crane solutions that exceed expectations. Contact us today to learn more about our services and how we can support your project in Raipur, Chhattisgarh, and beyond. Let ASP Cranes be your trusted partner for all your crane needs!
Expanding Access to Affordable At-Home EV Charging by Vanessa WarheitForth
Vanessa Warheit, Co-Founder of EV Charging for All, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
What Could Be Behind Your Mercedes Sprinter's Power Loss on Uphill RoadsSprinter Gurus
Unlock the secrets behind your Mercedes Sprinter's uphill power loss with our comprehensive presentation. From fuel filter blockages to turbocharger troubles, we uncover the culprits and empower you to reclaim your vehicle's peak performance. Conquer every ascent with confidence and ensure a thrilling journey every time.
Understanding Catalytic Converter Theft:
What is a Catalytic Converter?: Learn about the function of catalytic converters in vehicles and why they are targeted by thieves.
Why are They Stolen?: Discover the valuable metals inside catalytic converters (such as platinum, palladium, and rhodium) that make them attractive to criminals.
Steps to Prevent Catalytic Converter Theft:
Parking Strategies: Tips on where and how to park your vehicle to reduce the risk of theft, such as parking in well-lit areas or secure garages.
Protective Devices: Overview of various anti-theft devices available, including catalytic converter locks, shields, and alarms.
Etching and Marking: The benefits of etching your vehicle’s VIN on the catalytic converter or using a catalytic converter marking kit to make it traceable and less appealing to thieves.
Surveillance and Monitoring: Recommendations for using security cameras and motion-sensor lights to deter thieves.
Statistics and Insights:
Theft Rates by Borough: Analysis of data to determine which borough in NYC experiences the highest rate of catalytic converter thefts.
Recent Trends: Current trends and patterns in catalytic converter thefts to help you stay aware of emerging hotspots and tactics used by thieves.
Benefits of This Presentation:
Awareness: Increase your awareness about catalytic converter theft and its impact on vehicle owners.
Practical Tips: Gain actionable insights and tips to effectively prevent catalytic converter theft.
Local Insights: Understand the specific risks in different NYC boroughs, helping you take targeted preventive measures.
This presentation aims to equip you with the knowledge and tools needed to protect your vehicle from catalytic converter theft, ensuring you are prepared and proactive in safeguarding your property.
Implementing ELDs or Electronic Logging Devices is slowly but surely becoming the norm in fleet management. Why? Well, integrating ELDs and associated connected vehicle solutions like fleet tracking devices lets businesses and their in-house fleet managers reap several benefits. Check out the post below to learn more.
Ever been troubled by the blinking sign and didn’t know what to do?
Here’s a handy guide to dashboard symbols so that you’ll never be confused again!
Save them for later and save the trouble!
EV Charging at MFH Properties by Whitaker JamiesonForth
Whitaker Jamieson, Senior Specialist at Forth, gave this presentation at the Forth Addressing The Challenges of Charging at Multi-Family Housing webinar on June 11, 2024.
Globalfleet - global fleet survey 2021 full results
Daewoo doosan solar 300 lc v excavator operation and maintenance manual
1. 022-00020E Operation and Maintenance Manual Copyright Daewoo 2001
Daewoo reserves the right to improve our products in a continuing process to provide the best possible
product to the market place. These improvements can be implemented at any time with no obligation to
change materials on previously sold products. It is recommended that consumers periodically contact their
distributors for recent documentation on purchased equipment.
This documentation may include attachments and optional equipment that is not available in your
machine’s package. Please call your distributor for additional items that you may require.
Illustrations used throughout this manual are used only as a representation of the actual piece of
equipment, and may vary from the actual item.
Operation and Maintenance Manual
022-00020E
Serial Number 1001 and Up
August 2001
Solar 300LC-V
2. 022-00020E Operation and Maintenance Manual Table of Contents I
TABLE OF CONTENTS
Safety .................................................................................................. 1-1
To the Operator of a Daewoo Excavator......................................................1-1
Location of Safety Labels............................................................................1-4
Summary of Safety Precautions for Lifting in Digging Mode .....................1-12
Unauthorized Modifications.......................................................................1-13
General Hazard Information......................................................................1-13
Before Starting Engine ..............................................................................1-21
Machine Operation....................................................................................1-24
Maintenance..............................................................................................1-29
Battery.......................................................................................................1-37
Towing .......................................................................................................1-39
Shipping and Transportation .....................................................................1-40
Excavator Rated Lift Capacity Tables........................................................1-41
Operating Controls ............................................................................ 2-1
Component Locations .................................................................................2-2
Operator’s Area ...........................................................................................2-4
Operational Controls and Panels.................................................................2-5
Instrument Panel .......................................................................................2-14
Multifunction Gauge and Graphic Information...........................................2-19
Mode Selection Buttons ............................................................................2-23
Setting Method for Main Menu ..................................................................2-26
Heater and Air Conditioner Control Panel .................................................2-30
Stereo........................................................................................................2-35
Fuse Boxes................................................................................................2-42
Miscellaneous Electrical Devices ..............................................................2-43
Seat Adjustment........................................................................................2-45
Seat Belt....................................................................................................2-47
Ceiling Cover.............................................................................................2-48
Front Windows...........................................................................................2-49
3. II Table of Contents 022-00020E Operation and Maintenance
Door Side Latch.........................................................................................2-52
Miscellaneous Access Covers and Doors .................................................2-53
Cab Storage Compartments .....................................................................2-54
Ashtray ......................................................................................................2-54
Emergency Glass Breaking Tool ...............................................................2-55
Operation............................................................................................ 3-1
To Handle a New Excavator ........................................................................3-1
Starting and Stopping the Engine ...............................................................3-2
Safety Lever ..............................................................................................3-14
Travel.........................................................................................................3-15
Operating Instructions ...............................................................................3-20
Operating Precautions...............................................................................3-25
Parking Excavator .....................................................................................3-30
Towing Procedure......................................................................................3-31
Hydraulic Breaker......................................................................................3-32
Operating Techniques ...............................................................................3-36
Operation Under Unusual Conditions........................................................3-38
Inspection, Maintenance and Adjustment....................................... 4-1
Preliminary Work Machine Setup for Maintenance .....................................4-3
Table of Recommended Lubricants.............................................................4-5
Fluid Capacities...........................................................................................4-7
Lubrication and Service Chart.....................................................................4-7
Maintenance Intervals ...............................................................................4-10
10 Hour / Daily Service .............................................................................4-12
50 Hour / Weekly Service..........................................................................4-22
250 Hour / Monthly Service.......................................................................4-26
500 Hour / 3 Month Service ......................................................................4-31
1000 Hour / 6 Month Service ....................................................................4-39
2000 Hour / Yearly Service........................................................................4-45
4000 Hour / Biennial Service.....................................................................4-48
Venting and Priming Hydraulic System .....................................................4-49
4. 022-00020E Operation and Maintenance Manual Table of Contents III
Handling of Accumulator ...........................................................................4-51
Fuel Transfer Pump (Option) .....................................................................4-52
Electrical System.......................................................................................4-54
Air Conditioning System............................................................................4-58
Bucket .......................................................................................................4-59
Bucket Shimming Procedures ...................................................................4-62
Track Tension.............................................................................................4-63
Bolt and Nut Inspection .............................................................................4-65
Maintenance in Special Conditions ...........................................................4-66
Long Term Storage....................................................................................4-67
Transportation.................................................................................... 5-1
Loading and Unloading ...............................................................................5-1
Lifting With Sling..........................................................................................5-4
Troubleshooting ................................................................................. 6-1
Engine .........................................................................................................6-1
Hydraulic System ........................................................................................6-2
Swing System..............................................................................................6-3
Travel System ..............................................................................................6-4
Electrical System.........................................................................................6-4
Specification....................................................................................... 7-1
Standard Specification ................................................................................7-1
Overall Dimensions .....................................................................................7-2
Working Range............................................................................................7-3
Approximate Weight of Workload Materials ................................................7-4
Index.................................................................................................... 8-1
5. 022-00020E Operation and Maintenance Manual Safety 1-1
1SAFETY
TO THE OPERATOR OF A DAEWOO EXCAVATOR
Please respect the importance of taking responsibility for your own safety, and that of other people who
may be affected by your actions.
The safety information on the following pages is organized into the following sections:
1. “Location of Safety Labels” on page 1-4
2. “Summary of Safety Precautions for Lifting in Digging Mode” on page 1-12
3. “General Hazard Information” on page 1-13
4. “Before Starting Engine” on page 1-21
5. “Machine Operation” on page 1-24
6. “Maintenance” on page 1-29
7. “Battery” on page 1-37
8. “Towing” on page 1-39
9. “Shipping and Transportation” on page 1-40
10. “Excavator Rated Lift Capacity Tables” on page 1-41
DANGER!
Unsafe use of the excavator could lead to serious injury or death. Operating procedures,
maintenance and equipment practices or traveling or shipping methods that do not follow the
safety guidelines on the following pages could cause serious, potentially fatal injuries or
extensive damage to the machine or nearby property.
6. 1-2 Safety 022-00020E Operation and Maintenance Manual
WARNING!
Improper operation and maintenance of this machine can be hazardous and could result in
serious injury or death.
Operator and maintenance personnel should read this manual thoroughly before beginning
operation or maintenance.
Keep this manual in the storage compartment to the rear of the operator’s seat, and have all
personnel involved in working on the machine read the manual periodically.
Some actions involved in operation and maintenance of the machine can cause a serious
accident, if they are not done in a manner described in this manual.
The procedures and precautions given in this manual apply only to intended uses of the
machine.
If you use your machine for any unintended uses that are not specifically prohibited, you must
be sure that it is safe for any others. In no event should you or others engage in prohibited uses
or actions as described in this manual.
Daewoo delivers machines that comply with all applicable regulations and standards of the
country to which it has been shipped. If this machine has been purchased in another country or
purchased from someone in another country, it may lack certain safety devices and
specifications that are necessary for use in your country. If there is any question about whether
your product complies with the applicable standards and regulations of your country, consult
Daewoo or your Daewoo distributor before operating the machine.
7. 022-00020E Operation and Maintenance Manual Safety 1-3
LEARN THE SIGNAL WORDS USED WITH THE SAFETY ALERT SYMBOL
The words "CAUTION," "WARNING," and "DANGER" used throughout this manual and on decals on the
machine indicate degree of risk of hazards or unsafe practices. All three degrees of risk indicate that safety
is involved. Observe precautions indicated whenever you see the Safety Alert "Triangle," no matter which
signal word appears next to the "Exclamation Point" symbol.
Safety precautions are described in SAFETY from page 1-4 on.
Daewoo cannot predict every circumstance that might involve a potential hazard in operation and
maintenance. Therefore the safety messages in this manual and on the machine may not include all
possible safety precautions. If any procedures or actions not specifically recommended or allowed in this
manual are used, you must be sure that you and others can do such procedures and actions safely and
without damaging the machine. If you are unsure about the safety of some procedures, contact a
DAEWOO distributor.
SAFETY ALERT SYMBOL
Be Prepared - Get To Know All Operating and Safety Instructions.
This is the Safety Alert Symbol. Wherever it appears in this manual or on safety signs on the
machine you should be alert to the potential for personal injury or accidents. Always observe
safety precautions and follow recommended procedures.
CAUTION!
This word is used on safety messages and safety labels and indicates potential of a hazardous
situation that, if not avoided, could result in minor or moderate injury. It may also be used to alert
against a generally unsafe practice.
WARNING!
This word is used on safety messages and safety labels and indicates potential of a hazardous
situation that, if not avoided, could result in serious injury or death. It may also be used to alert
against a highly unsafe practice.
DANGER!
This word is used on safety messages and safety labels and indicates an imminent hazard of a
situation that, if not avoided, is very likely to cause death or extremely serious injury. It may also
be used to alert against equipment that may explode or detonate if handled or treated carelessly.
8. 1-4 Safety 022-00020E Operation and Maintenance Manual
LOCATION OF SAFETY LABELS
There are several specific warning signs on this machine. The exact location of hazards and the
description of the hazards are reviewed in this section.
Please become familiarized with all warning signs.
Make sure that all of the warning signs are legible. Clean the warning signs or replace the warning signs if
you cannot read the words. Replace the illustrations if the illustrations are not visible. When you clean the
warning signs, use a cloth, water and soap. Do not use solvent, gasoline, or other harsh chemicals to clean
the safety signs. Solvents, gasoline, or other harsh chemicals could loosen the adhesive that secures the
warning sign. Loose adhesive will allow the warning sign to fall off.
Replace any safety sign that is damaged, or missing. If a safety sign is attached to a part that is replaced,
install a safety sign on the replacement part.
9 11 14
13 8
12
5
3 6 5 1 2
15
16
10 4 7
ARO1130L
Figure 1
9. 022-00020E Operation and Maintenance Manual Safety 1-5
1. WARNINGS FOR OPERATION, INSPECTION AND MAINTENANCE (190-00688, 190-00092).
2. WARNINGS FOR HIGH VOLTAGE (190-00689, 190-00096)
3. WARNINGS WHEN OPENING A FRONT WINDOW (190-00690, 190-00093).
AVOID DEATH OR SERIOUS INJURY. - READ AND UNDERSTAND
OPERATION MANUAL AND SAFETY LABELS prior to operating
this machine.
190-00688
190-00092
Never get in under the machine while it is being jacked up
with boom and arm.
Sound the horn to alert the people nearby before operating,
and make sure that all persons are clear of area.
Controls may be changed for attachments or operator
preference. Try control pattern before operating.
ARO1080L
ARO1090L
DANGER
SERIOUS INJURY OR DEATH BY
ELECTROCTION can occur if
machine or attachments are
not a safe distance from electrical
power lines.
Line voltage Safe Distance
6.6 kv
66.6 kv
275.0 kv
At least 3m(10ft)
At least 5m(16ft)
At least 10m(33ft)
190-00689
190-00096
ARO1100L
Falling window can cause
injury.
When raising window,
lock it in place with lock
pin on left side.
190-00690
190-00093
10. 1-6 Safety 022-00020E Operation and Maintenance Manual
4. WARNINGS FOR A HIGH PRESSURE
CYLINDER (190-00122).
5. WARNINGS WHEN ADJUSTING TRACK TENSION (2190-3386A, 190-00521).
190-00122
ARO1110L
190-00521
The track adjuster adjustment and handling
The spring in the track adjuster is loaded with great force
and the pressure in the cylinder is very high. For this
reason there is a possibility of an accident which
may involve injury to personnel. It is very dangerous
to make mistakes when performing such an adjustment
or disassembly.
Be sure to read the procedures described in the Operation
and Maintenance Manual carefully before adjusting the
track tension.
2190-3386A
ARO1120L
11. 022-00020E Operation and Maintenance Manual Safety 1-7
6. WARNINGS FOR LEAVING OPERATOR’S SEAT (190-00693, 190-00094).
7. WARNINGS FOR BATTERIES MAINTENANCE (2190-2533A, 190-00100).
ARO1140L
190-00094
Sudden and unwanted machine
movement can cause serious
injury or death.
Always make sure when leaving
operator's seat to :
Lower equipment to the ground.
Move safety lever to LOCK position.
Turn key switch OFF. Remove key
from switch.
190-00693
ARO1150L
190-00100
Battery fumes can explode. Keep sparks and flames away
from batteries.
Always avoid storing metals like tools or flammable
materials around or on the batteries. Explosion or fire
can be caused by shortcircuiting batteries.
Surfuric acid in battery is poisonous. It is strong enough
burn skin, eat holes in clothing, and cause blindness
if splashed eyes.
If you spill acid on yourself;
1. Flush your skin with water.
2. Apply baking soda or lime to help neutralize the acid.
3. Flush your eyes with water for 10-15 minutes.
Get medical attention immediately.
2190-2533A
12. 1-8 Safety 022-00020E Operation and Maintenance Manual
8. WARNINGS FOR HIGH TEMPERATURE HYDRAULIC OIL (190-00691, 190-00097)
9. WARNINGS FOR HOT COOLANT (190-00692, 190-00097)
10. WARNINGS FOR HANDLING AN ACCUMULATOR (190-00703, 190-00099).
ARO1160L
HOT OIL CAN CAUSE INJURY OR
BLINDNESS.
To prevent hot oil from spurting out:
Turn engine off
Allow oil to cool
Slowly loosen cap to relieve
pressure
190-00691
190-00097
ARO1170L
190-00097
HOT COOLANT CAN CAUSE INJURY
OR BLINDNESS.
Never loosen or open radiator cap
when coolant is hot and under
pressure.
To open cap, stop engine, wait until
radiator is cool. Then loosen cap
slowly to relieve the pressure.
190-00692
EXPLOSIONHAZARD
Keep away from flame.
Do not weld on, or drill
into the accumulator.
190-00703
190-00099
ARO1180L
13. 022-00020E Operation and Maintenance Manual Safety 1-9
11. WARNINGS FOR ROTATING PARTS (190-00694, 190-00095, 190-00557).
12. WARNING TAG - USED WHEN INSPECTION AND MAINTENANCE (190-00695, 190-00098).
ARO1190L
Rotating parts can cause
personal injury.
Keep away from fan and
belt when engine is run-
ning. Stop engine before
servicing.
190-00694
190-00095
190-00557
190-00098
ARO1200L
WARNING
DO NOT OPERATE
when performing inspection
or maintenance
190-00695
14. 1-10 Safety 022-00020E Operation and Maintenance Manual
13. WARNING FOR A HOT SURFACE
(190-00648).
14. CAUTION FOR HOOD (190-00522).
15. KEEP OUT OF THE SWING AREA (2190-3379, 190-00090).
190-00648
ARO1210L
190-00522
ARO1220L
ARO1240L
2190-3379
190-00090
15. 022-00020E Operation and Maintenance Manual Safety 1-11
16. WARNINGS FOR FRONT
ATTACHMENTS (190-00652).
ARO1230L
190-00652
16. Thank you very much for
your reading. Please Click
Here. Then Get COMPLETE
MANUAL. NO WAITING
NOTE:
If there is no response to
click on the link above,
please download the PDF
document first and then
click on it.
17. 1-12 Safety 022-00020E Operation and Maintenance Manual
SUMMARY OF SAFETY PRECAUTIONS FOR LIFTING
IN DIGGING MODE
To lift safely while in Digging Mode, the following items must be evaluated by the operator and the work site
crew.
• Condition of ground support.
• Excavator configuration and attachments.
• Weight, lifting height and lifting radius.
• Safe rigging of the load.
• Proper handling of the suspended load.
Taglines on opposite sides of the load can be very helpful in keeping a suspended load secure, if they are
anchored safely to control points on the ground.
Always engage the "Digging Mode" control on the Instrument Panel before using the excavator for lifting
work.
DANGER!
Unsafe use of the excavator while making rated lifts could cause serious, potentially fatal
injuries or extensive damage to the machine or nearby property. Do not let anyone operate the
machine unless they’ve been properly trained and understand the information in the Operation
and Maintenance Manual.
WARNING!
NEVER wrap a tagline around your hands or body.
NEVER rely on taglines or make rated lifts when wind gusts are more than 48.3 km/hr (30 mi/h).
Be prepared for any type of wind gust when working with loads that have a large surface area.
WARNING!
If you need more information or have any questions or concerns about safe operating
procedures or working the excavator correctly in a particular application or in the specific
conditions of your individual operating environment, please consult your local Daewoo
representative.
18. 022-00020E Operation and Maintenance Manual Safety 1-13
UNAUTHORIZED MODIFICATIONS
Any modification made without authorization or written approval from Daewoo can create a safety hazard,
for which the machine owner must be held responsible.
For safety’s sake, replace all OEM parts with the correct authorized or genuine Daewoo part. For example,
not taking the time to replace fasteners, bolts or nuts with the correct replacement parts could lead to a
condition in which the safety of critical assemblies is dangerously compromised.
GENERAL HAZARD INFORMATION
SAFETY RULES
Only trained and authorized personnel can operate and maintain the machine.
Follow all safety rules, precautions and instructions when operating or performing maintenance on the
machine.
Do not operate the machine if you are not feeling well, if you are taking medication that makes you feel
sleepy, if you have been drinking, or if you are suffering from emotional problems. These problems will
interfere with your sense of judgement in emergencies and may cause accidents.
When working with another operator or with a person on work site traffic duty, be sure that all personnel
know the nature of the work and understand all hand signals that are to be used.
Always observe strictly any other rules related to safety.
SAFETY FEATURES
Be sure that all guards and covers are installed in their proper position. Have guards and covers repaired
immediately if damaged.
Be sure that you understand the method of use of safety features such as safety lock lever and the seat
belt, and use them properly.
Never remove any safety features. Always keep them in good operating condition.
Failure to use safety features according to the instructions in the Operation and Maintenance Manual could
result in serious bodily injury.