Download to read offline
Uploaded byMM Naina Exports
Elcometer 146 Saltsmart Contamination Meter determines the amount of soluble salts present in a test sample supplied by Multilab in india
Elcometer 146 Saltsmart Contamination Meter determines the amount of soluble salts present in a test sample supplied by Multilab in india Product Description The Elcometer 146 SaltSmart™ Salt Contamination System determines the amount of soluble salts present in a test sample. Using both the Elcometer SaltSmart™ Test Strips and the Elcometer 146 SaltSmart™ Contamination Meter, this system offers a fast, easy-to-use alternative to the Bresle Test and has been proven to be equivalent to ISO 8502-9. A de-ionised water bottle is attached to the end of the Elcometer 146 SaltSmart™ Test Strip which is then fixed to the substrate using non-residue tape. The test strip is positioned at a 10° angle to allow the water to flow on to the foam sensor which is in contact with the substrate. After approximately 8 minutes the test strip is removed and the amount of soluble salts present is measured using the Elcometer 146 SaltSmart™ Contamination Meter, which displays and stores results in µS/cm, ug/cm² or mg/m². Measuring salt contamination using the SaltSmart™ Contamination Meter Taking care not to touch the white foam sensor, remove the protective packaging and place the de-ionized water bottle onto the SaltSmart™ test strip. Place the test strip & bottle on to the substrate and hold in place with painters tape. On vertical surfaces, make sure that the red line on the test strip is horizontal - creating a 10° incline to allow water flow. Whilst multiple test strips can be set up at the same time, after approximately 8 minutes remove each test strip in order from the surface. Place the test strip into the SaltSmart™ meter, and read the value on the display. Environmentally discard the test strip, bottle and tape. Part Number Description E146----1 Elcometer 146 SaltSmart™ Soluble Salt Contamination Meter Measuring Range 0-150μS/cm (0-155 mg/m2) Resolution 1 μS (1.03 mg/m2) Operating Temperature 0—50 °C (32—122 °F) Accuracy ±1% Temperature Coeffient 2.0 % per °C (F) Battery Type 2 AA Batteries; suitable for approx 100+ tests Sample Time 8 minutes for strip development, 15 seconds for meter analysis Sampling Size 20.6 x 15mm (309 mm2) Dimensions 160 x 80 x 30mm Weight 1.2 kg (2.5 lb) Packing List Elcometer 146 SaltSmart™ Contamination Meter, Rubber Boot for SaltSmart™ Contamination Meter, USB Cable, SaltSmart™ Validation Strip , 2 x AA Batteries, Belt Pouch, Getting Started CD Can be used in accordance with: NACE SP0508, IMO PSPC, ISO 8502-9, SSPC, US Navy 009-32 FY12
Elcometer 146 Saltsmart Contamination Meter determines the amount of soluble salts present in a test sample supplied by Multilab in india
- 1. Datasheet DFT ENGLAND Elcometer Limited ManchesterD FT6BU M43 , Tel: +44 (0)161 371 6000 Fineness of Grind, Density, Fax: +44 (0)161 371 6010 Flowe-mail: sales@elcometer.comPoint, Cups, Viscosity, Flash Film Applicators, Washability and brasion FRANCE Hardness, Impact & Bend Testers, Elcometer Sarl ters, Gloss, Bou 45430 Colour, Material Thickness ace Profile, (0)2 38 86 33Climatic Testing Tel: +33 Wet Film, 44 Fax: +33 (0)2 38 91 37 66 ating Thickness Gauges, Adhesion e-mail: fr_info@elcometer.com le Testers, Porosity Detectors, Software sion, Inspection Kits, Zahn Cups, Viscosity USA Elcometer Inc ised Film Applicators, Drying Time Recorders Rochester Hills Hardness, Elasticity and ability, Abrasion, Michigan 48309 Tel: +1 248 650 0500 ormation, Appearance, Material Thickness Toll Free: 800 521 0635 face Cleanliness, 0501 Fax: +1 248 650 Dewpoint Meters et Film e-mail: inc@elcometer.com Thickness Combs, Dry Film Cross-Hatch, Pinhole & Porosity, PIGs GERMANY DOI Elcometer Instruments GmbH Testers Meters, Scratch Moisture, Aalen D-73431 Oven Recorders Tel: +49(0)7361 52806 ™ ElcoMaster 0 Fax: +49(0)7361 52806 77 e-mail: de_info@elcometer.de REPUBLIC OF SINGAPORE Elcometer (Asia) Pte Ltd Singapore 589472, Tel: +65 6462 2822 Fax: +65 6462 2860 e-mail: asia@elcometer.com Fineness of Grind, Density Flow & Dip Cups Rotational Viscosity Flash Point, Impact Testers Washability & Abrasion Testers Film Applicators, Bend Testers, Gloss Thickness Gauges, Surface Profile, Wet Film Dry Film, Coating Thickness Gauges Climatic Testing, Adhesion, Pinhole Testers Porosity, Software, Dispersion, Inspection Kits Zahn Cups, Motorised Film Applicators Drying Time Recorders, Washability, Abrasion Scratch & Hardness, Elasticity & Deformation Surface Cleanliness, DOI Gloss Meters Colour, Moisture, Dewpoint Meters Cross-Hatch, Oven Recorders Surface Contamination TM ElcoMaster BELGIUM Elcometer SA B-4681 Hermalle /s Argenteau Tel: +32 (0)4 379 96 10 Fax: +32 (0)4 374 06 03 e-mail: be_info@elcometer.com JAPAN Elcometer KK Nisso Dai 23 Building, Room 804, 3-8-25, Toranomon, Minato-ku, Tokyo 105-0001 Tel: +81-3-6869-0770 Fax: +81-3-6809-1442 e-mail: jp_info@elcometer.com THE NETHERLANDS Elcometer NL 3584 BH Utrecht Tel: +31 (0)30 210.7005 Fax: +31 (0)30 210.6666 email: nl_info@elcometer.com Elcometer 146 SaltSmart™ Contamination Meter www.elcometer.com www.elcometer.com
- 2. Datasheet Elcometer 146 SaltSmart™ ContaminationMeter The Elcometer 146 SaltSmart™ Salt Contamination System determines the amount of soluble salts present in a test sample. Using both the Elcometer SaltSmart™ Test Strips and the Elcometer 146 SaltSmart™ Contamination Meter, this system offers a fast, easy-to-use alternative to the Bresle Test and has been proven to be equivalent to ISO 8502-9. A de-ionised water bottle is attached to the end of the Elcometer 146 SaltSmart™ Test Strip which is then fixed to the substrate using non-residue tape. The test strip is positioned at a 10° angle to allow the water to flow on to the foam sensor which is in contact with the substrate. After approximately 8 minutes the test strip is removed and the amount of soluble salts present is measured using the Elcometer 146 SaltSmart™ Contamination Meter, which displays and stores results in µS/cm, ug/cm² or mg/m². STANDARDS: NACE SP0508, IMO PSPC, ISO 8502-9, SSPC, US Navy 009-32 FY12 Technical Specification Part Number E146----1 Measuring Range Operating Temperature Temperature Coeffient Battery Type Sample Time Sampling Size Dimensions Description Elcometer 146 SaltSmart™ Soluble Salt Contamination Meter 0-150μS/cm (0-155 mg/m2) Resolution 0—50 °C (32—122 °F) Accuracy 2.0 % per °C (F) 2 AA Batteries; suitable for approx 100+ tests 8 minutes for strip development, 15 seconds for meter analysis 20.6 x 15mm (309 mm2) 160 x 80 x 30mm Weight Packing List Elcometer 146 SaltSmart™ Contamination Meter, Rubber Boot for SaltSmart™ Contamination Meter, USB Cable, SaltSmart™ Validation Strip , 2 x AA Batteries, Belt Pouch, 10° Getting Started CD 10° 1 μS (1.03 mg/m2) ±1% 1.2 kg (2.5 lb) 00092962 Accessories 62 000929 T14623679 T14623680 T14623681 Elcometer 146 SaltSmart™ Contamination Test Strips (Pack of 10) Elcometer 146 SaltSmart™ Validation Strip Elcometer 146 Non-Residue Tape (Pack of 2) Measuring salt contamination using the SaltSmart™ Contamination Meter 00092962 62 29 09 00 00092962 10° 62 000929 Taking care not to touch the white foam sensor, remove the protective packaging and place the de-ionized water bottle onto the SaltSmart™ test strip. Place the test strip & bottle on to the substrate and hold in place with painters tape. On vertical surfaces, make sure that the red line on the test strip is horizontal - creating a 10° incline to allow water flow. Whilst multiple test strips can be set up Place the test strip into the at the same time, after approximately SaltSmart™ meter, and read the 8 minutes remove each test strip in value on the display. order from the surface. Environmentally discard the test strip, bottle and tape. 009 2 296 www.elcometer.com