Authentic No 1 Amil Baba In Pakistan Amil Baba In Faisalabad Amil Baba In Kar...
How To Install Low Voltage Deck Lights Wiring The Sockets
1. How To Install Low Voltage Deck Lights and Post Caps Installing the sockets. Click the next slide to view the video on how to wire the sockets. Most of your posts will have 2 wires. Peel each one apart and strip them. Then attach one side of one wire to one side of the other. Then again for the other 2 remaining wires. You'll have 2 wires in one group and 2 in another. Both wires in a group will be from separate wires. Then attach one side of the socket to one group of wires and the other side to the other group of wires. Cap each set off with wirenuts. Tape up the 2 groups of wires. Screw the socket down. Tuck in the wires and you are finished. Just push in the bulb and put on the cap. If you purchase the smooth version of my cap you may have to recess the socket slightly so that the bulb does not touch the inside of the cap.
2. How To Install Low Voltage Deck Lights and Post Caps www.MoonlightDecks.com