1 1 ratio 90 degree bevel gear assembly, gear drive two inputs one output, alloy body angle gearbox, gearbox right angle 1 inch shaft suppliers, manufacturers
1:1 ratio 90 degree bevel gear assembly, gear drive two inputs one output, alloy body angle gearbox, gearbox right angle 1 inch shaft Features:
Input power from 0.1 Kw to 157 Kw. Transmission torque from 9 Nm to 1299 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:3 gear increasing ratio. Input and output speed from 10 rpm to 2000 rpm, custom higher speed 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 11 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features.
JTP series cubic miter gearbox structures include housing, miter gear, drive shaft bearing, shaft sealing ring, flange bearing, pinion shaft, output shaft, output shaft bearing, bearing cover.
Miter Gear
High purity rugged alloy steel material; Carburizing process, case hardened in pairs for intersecting shafts; Low noise with grinded spiral teeth; High torque with milled teeth; High rigidity and wear resistance
Pinion Shaft and Output Shaft
Hardened and tempered alloy steel material; Hanging heavy load capacity; With key and keyway; Customized stainless steel, chromium coated or other corrosion resistance painting; Customized spline shaft,shaft without key and keyway
Housing
High rigidity cast iron; Customized stainless steel, galvanic coating or corrosion resistance painting.
agricultural right angle gearbox, ninety degree transmission drives, gear box bevel gear drive, hand crank right angle gearbox, 90 degree drive 1.5in. gearbox Input power from 0.1 Kw to 157 Kw. Transmission torque from 9 Nm to 1299 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:3 gear increasing ratio. Input and output speed from 10 rpm to 2000 rpm, custom higher speed 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 11 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features.
The document describes the JTW-Series machine screw jacks. Key points:
- The jacks use heat-treated steel and bronze gears to translate rotation into linear movement via an acme thread lifting screw. Ball bearings and seals support components.
- Configurations include types that translate, rotate the lifting nut, include anti-rotation/backlash features, and different lifting screw ends. Capacities range from 0.5 to 100 tons.
- JTW jacks are self-locking, precisely position loads, and do not require additional braking. They can be driven manually or by motor in various mounting positions.
- Applications include metalworking, mining, construction, and other industries
This document provides specifications for the JTV-series miter gearbox. The gearbox has a cubic, machined housing with average efficiencies of 95-98%. It can operate in both directions smoothly with low noise and vibration. Spiral bevel gears are made of hardened alloy steel and precision processed to provide rigidity and high precision transmission. The gearbox is available in various configurations with 1-4 shafts and maximum torques ranging from 19Nm to 1841Nm.
Jacton Industry Co., Ltd is a company that provides lifting systems solutions including screw jacks, miter gearboxes, and lifting systems. They can be contacted via their phone number, Skype, email, or website for inquiries about custom screw jacks, custom acme screws, or their JT-Series miter gearbox product line.
The JT-Series Acme Screw Jacks incorporate heat-treated steel and bronze gears to translate or rotate an acme threaded lifting screw, supporting loads without backdriving. They are available in sizes from 0.5 to 100 tons and various configurations, and can lift at speeds up to 3 m/min. JT-Series jacks are commonly used for controlled lifting, lowering, pushing and pulling in applications like steel mill roller adjustment. They are generally maintenance-free and accessories allow for electric, hand wheel, or combined motor operation.
The document describes the JTC-Series Cubic Screw Jack. It has a worm gear driven trapezoidal lead screw that incorporates a heat-treated steel worm and bronze worm gear. It uses ball bearings and seals to support components. The jack housing is made of ductile iron and comes in various configurations for different applications. It can provide lifting forces from 2.5 to 500 kN and linear speeds up to 1.5 m/min. Accessories include motors, wheels, and switches. It is used for applications requiring controlled lifting/lowering such as conveyors and stages.
The document describes JTB-Series Ball Screw Jacks, which use ball screws and ball nuts instead of machine screws to reduce torque requirements. They have worm gears that drive bronze gear sets and ball nuts to translate or rotate lifting ball screws. The ball screw design allows for smoother and more efficient lifting than machine screw jacks. JTB ball screw jacks are used where controlled lifting is required and can be installed as single units or in lifting systems. They come in various configurations for different applications.
we are professional 1 ton solar actuators and motorized jacks, 5 ton solar tracking jacks and actuators, 10 ton solar tracking drive jacks, 20 ton solar tracking drive actuators for solar panel tracker system in canada manufacturers and suppliers in China.
agricultural right angle gearbox, ninety degree transmission drives, gear box bevel gear drive, hand crank right angle gearbox, 90 degree drive 1.5in. gearbox Input power from 0.1 Kw to 157 Kw. Transmission torque from 9 Nm to 1299 Nm. 1:1 ratio, 1.5:1, 2:1, 3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:3 gear increasing ratio. Input and output speed from 10 rpm to 2000 rpm, custom higher speed 3000 rpm. High efficiency from 95% to 98%. Input and output shaft diameter from 11 mm to 60 mm. 12 types input and output shaft arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys. Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low temperature, high torque features.
The document describes the JTW-Series machine screw jacks. Key points:
- The jacks use heat-treated steel and bronze gears to translate rotation into linear movement via an acme thread lifting screw. Ball bearings and seals support components.
- Configurations include types that translate, rotate the lifting nut, include anti-rotation/backlash features, and different lifting screw ends. Capacities range from 0.5 to 100 tons.
- JTW jacks are self-locking, precisely position loads, and do not require additional braking. They can be driven manually or by motor in various mounting positions.
- Applications include metalworking, mining, construction, and other industries
This document provides specifications for the JTV-series miter gearbox. The gearbox has a cubic, machined housing with average efficiencies of 95-98%. It can operate in both directions smoothly with low noise and vibration. Spiral bevel gears are made of hardened alloy steel and precision processed to provide rigidity and high precision transmission. The gearbox is available in various configurations with 1-4 shafts and maximum torques ranging from 19Nm to 1841Nm.
Jacton Industry Co., Ltd is a company that provides lifting systems solutions including screw jacks, miter gearboxes, and lifting systems. They can be contacted via their phone number, Skype, email, or website for inquiries about custom screw jacks, custom acme screws, or their JT-Series miter gearbox product line.
The JT-Series Acme Screw Jacks incorporate heat-treated steel and bronze gears to translate or rotate an acme threaded lifting screw, supporting loads without backdriving. They are available in sizes from 0.5 to 100 tons and various configurations, and can lift at speeds up to 3 m/min. JT-Series jacks are commonly used for controlled lifting, lowering, pushing and pulling in applications like steel mill roller adjustment. They are generally maintenance-free and accessories allow for electric, hand wheel, or combined motor operation.
The document describes the JTC-Series Cubic Screw Jack. It has a worm gear driven trapezoidal lead screw that incorporates a heat-treated steel worm and bronze worm gear. It uses ball bearings and seals to support components. The jack housing is made of ductile iron and comes in various configurations for different applications. It can provide lifting forces from 2.5 to 500 kN and linear speeds up to 1.5 m/min. Accessories include motors, wheels, and switches. It is used for applications requiring controlled lifting/lowering such as conveyors and stages.
The document describes JTB-Series Ball Screw Jacks, which use ball screws and ball nuts instead of machine screws to reduce torque requirements. They have worm gears that drive bronze gear sets and ball nuts to translate or rotate lifting ball screws. The ball screw design allows for smoother and more efficient lifting than machine screw jacks. JTB ball screw jacks are used where controlled lifting is required and can be installed as single units or in lifting systems. They come in various configurations for different applications.
we are professional 1 ton solar actuators and motorized jacks, 5 ton solar tracking jacks and actuators, 10 ton solar tracking drive jacks, 20 ton solar tracking drive actuators for solar panel tracker system in canada manufacturers and suppliers in China.
we are professional Hand wheel manual operated 3 ton worm gear screw jacks lifting devices 300mm for nc precision slitting production line automatic slitter machine in australia manufacturers and suppliers in China.
The document describes 3 ton worm gear screw jacks lifting devices that are 300mm in travel stroke and have a maximum load capacity of 3 tons. The screw jacks are hand wheel operated and are being offered for use in NC precision slitting production lines and automatic slitter machines in Australia. The screw jacks have a high gear ratio of 1/6 and include additional protective piping.
The document advertises lightweight micro-miniature screw jacks from 2.5kn to 10kn lifting force for aluminum can production lines in the UK. It provides details on 4 screw jack models ranging from 2.5kn to 10kn lifting force that are inverted type, have a traveling screw configuration, 100mm lift height, and protective tubing. The screw jacks and other products like gear boxes, couplings, motors, and accessories are suitable for applications that require height adjustment and lifting on conveyor lines.
Jacton Electromechanical Co. produces precision screw jacks and gear lifts for precision straighteners used in the USA. They offer inverted translating worm gear screw jacks in various tonnage ratings from 1 to 10 tons with stroke lengths from 80 to 300mm. These screw jacks feature customized threaded ends, double input shaft worms, and protective tubes to prevent rust. Jacton also produces other screw jack and gear products for industrial machinery.
we are professional 5 ton upright traveling nut machine screw jack, 5t load acme nut screw jack for tunnel freezer top lid lifting in food processing lines in united kingdom manufacturers and suppliers in China.
we are professional Self locking jack screw driven scissor mechanism, worm gear screw jack style scissor lift system, acme screw jack lifting system for scissor lift table in singapore manufacturers and suppliers in China.
The document discusses screw jack lifting systems for scissor lift tables. It describes how ball screw or acme screw jack lifting systems can provide self-locking, precise positioning, uniform lifting speed, synchronization, easy installation and maintenance for scissor lifts. It then provides details about a specific order from a Singapore customer for a screw jack scissor lift table with two screw jacks driven by a 3-phase motor.
we are professional 25kn load capacity machine screw jacks 300mm stroke for continuous pu panel production lines in thailand manufacturers and suppliers in China.
The document describes 25kn load capacity machine screw jacks with 300mm stroke that are used in continuous sandwich panel laminating machines for raising and lowering caterpillar plates. It provides details on two models, the JTW-2.5T-IS-300-H-III-C-PP and JTC25-IS-500-H-I-C-PP, which have load capacities of 2.5 tons and 25kN respectively. It also includes links to the company's website pages on various screw jack products and related parts.
The document discusses a theatre lifting stage jack system for a theatre in France. It includes specifications for a lifting platform that is 15000x10000mm carrying a total load of 2400kN. The system would include 6 screw jacks each with a load capacity of 400kN and 628mm of travel, along with 3 miter gearboxes to connect the screw jacks. An electric motor with a gear reducer is also specified to drive the screw jack system at a speed of 37.5mm/min. Parts for the system like screw jacks, couplings, linking bars, bearings, motors and gearboxes are also referenced.
5 Ton Machine Screw Jacks, 20 Ton Upright Translating Screw Jacks For Lift Different Rotors Of Horizontal Axis Balancing Machines In Russia
This balancing machine is a dynamic soft bearing machine with a horizontal axis.
It has an AC motor with variable speed, which drives the balancing machine through a belt drive system.
The machine can be mounted on a reinforced concrete basement or rigid table for better operating conditions. Self-installing rollers, ac frequency inverter, 5t or 20t screw jacks for for smooth and non-shock rotor stop.
20 Ton Upright Translating Screw Jacks
Model: JT-20T-US-350-L-I-C-N
* Static loading capacity max. 20t, spindle tr64x8
* Upright mounting, translating screw configuration
* Travel stroke 350 mm
* Low worm gear ratio 1/32, 0.25mm per revolution of input shaft
* Double input shaft, no additional accessory
5 Ton Upright Translating Screw Jacks
Model: JT-5T-US-300-L-I-C-N
* Static loading capacity max. 5t, spindle tr38x6
* Upright mounting, translating screw configuration
* Travel stroke 300 mm
* Low worm gear ratio 1/24, 0.25mm per revolution of input shaft
* Double input shaft, no additional accessory
Jacton Electromechanical Co.,Ltd produces 5 ton and 20 ton upright translating screw jacks for lifting different rotors on horizontal axis balancing machines in Russia. The balancing machine has an AC motor with variable speed that drives the machine through a belt system. It can be mounted on a concrete base or table. The screw jacks provide smooth, non-shock stopping of rotors and include features like travel stroke, worm gear ratio, and double input shafts. Other products include various screw jack models, gear boxes, hand wheels, motors, and accessories.
The document discusses a DC 24V geared motor screw jack actuator used for hoisting water gates in agricultural industry in Malaysia. The screw jack has a 10 ton load capacity, 7 foot stroke length, and is powered by a 24V DC motor with a 1/4 gear reduction ratio. It includes protective tubing, bellows boots, and limit switches. The company, Jacton Electromechanical Co., also produces other screw jacks and gearboxes.
UK Live Centre In Electron Beam Welding Machines Height Adjustment By Cast Iron Crank Handle Operated Small Jack Screw Lift Mechanism
UK customers new design, use our micro-miniature screw jacks with hand wheel manual operation for height adjustable live centre in electroc beam welding machines.
Upright Travelling Nut Rotating Screw Jack Model: JTC2.5-UR-300-H-VI-A-HW
1. Jtc2.5 model, lifting screw tr16x4, max. load capacity 2.5kN
2. Upright mounting, travelling nut rotating screw configuration
3. 300mm stroke with high worm gear set ratio, 1mm per turn of hand wheel
4. Plain end fitting 12mm matching top ball bearing
5. Single input worm shaft, left side
6. Accessory: 100mm diam. hand wheel, bronze travelling nut with mounting 6 holes
Denmark spider mould installation 10 ton worm gear jack lift pulling manual operation.
Individually use 10 ton worm gear jack lift, manual operation with 8” (200mm) cast iron hand wheel, with fem with female spherical rod end for 5 ton load applications, pictures as follows. No guided for jacks, use anti-rotation device keyed screw worm gear jack lift pulling for spider mould installation in Denmark.
Model: JT-10T-UK-200-L-IV-C-PP/HW/SN/RE
* 10t screw jacks, max. dynamic load 6.4 tons
* Upright mounting, keyed screw type
* 200mm stroke with low speed ratio 1/32, 0.25mm per turn of hand wheel
* Screw top with thread end M30x2 matching PHS 30 female spherical rod end
* Double input worm shaft
* Accessories: protective tube, 8″ cast iron hand wheel, stop nut, Phs30 rod end.
Pakistan 5 ton travelling nuts rotating screw type screw jacks lifting work platform for raise container
Per screw jack lift systems parts includes 4 pcs 5t travelling nut rotating screw jacks, 2 pcs 1:1 ratio spiral bevel gear boxes, 5 pcs linking bars, 11 pcs couplings, 4 pcs steel plates, 4 pcs flange type pillow block ball bearings, 1 electric motor and 2 sets forward & reversible switches and contractors.
The linking bars, worm shafts of jacks, input & output shafts of gear boxes, output shaft of motor must be are installed and aligned. So all parts center height must be same, jt25 gear boxes are 90 mm, 1.5kw motor is 90 mm, jacks are 61.5 mm matching steel plate thickness 28.5mm, equal to 90 mm. So the main three parts center height is same with 90 mm. Easy to install them inline alignment.
The screw jack lift systems position is 1227.5×1227.5mm, included all safety factors, max. loading capacity 1500kg, travel stroke up to 2068.5 mm, after calculation, lifting screw total length 2282.5 mm. Lifting speed about 415 mm/min. Because lifting screw is very long, assured the whole lift system stable for linear motions, at the top end, extra additional 4 pcs flange type pillow block ball bearings to fix the long lifting screws, and extra additional guiding supports for the lift system.
Rotating jacks model: JTW-5T-UR-2068.5-L-I-C-N
Steel plate model: T28.5-JTW5T
Gear boxes model: JT25-1:1-1450R-1450R-I-LR-B3, JT25-1:1-1450R-1450R-I-LR-O-B3
Flange type ball bearing model: UCF204
Jaw coupling model: FL24/28
Connecting shaft model: D35L322.75, D35L651.5
Electric motor model: TC-90L-4-B3-1.5kw
2 set forward & reversible switches and contractors to control jacks lift system lifting up and down.
The document discusses motorized drive system jackscrews that are used for earth station antenna elevation and azimuth positioning. The jackscrews provide reliable, precise and smooth movement withstanding weather conditions. Key components include self-locking worm gear screw jacks coupled to helical gear motors, limit switches, protective covers, and swivel plates for pivoting antenna positioning. The company provides various jackscrew models and related parts to suit different applications.
Synchronization two jacks lift table, synchronizing four jacks lift table, synchronous lifting six jacks lift table suppliers.
Two Worm Gear Screw Jack Lift Systems Efficiency 95%
Inline Configuration Screw jack lift systems with two worm gear screw jacks, two flexible couplings, one linking bar and one motor. T Configuration Screw jack lift systems with two worm gear screw jacks, five flexible couplings, two linking bars, one right angle bevel gear box three-way and one motor.
Three Worm Gear Screw Jack Lift Systems Efficiency 90%
Inline Configuration Screw jack lift systems with three worm gear screw jacks, five flexible couplings, two linking bar and one motor. T Configuration Screw jack lift systems with three worm gear screw jacks, nine flexible couplings, four linking bars, two right angle bevel gear boxes three-way and one motor.
Four Worm Gear Screw Jack Lift Systems Efficiency 85%
H Configuration Screw jack lift systems with four worm gear screw jacks, three right angle bevel gear boxes three-way, 13 flexible couplings, six linking bars and one motor. U Configuration Screw jack lift systems with four worm gear screw jacks, three right angle bevel gear boxes three-way, 11 flexible couplings, four linking bars and one motor.
Six Worm Gear Screw Jack Lift Systems Efficiency 80%
H Configuration Six Screw jack lift systems with six worm gear screw jacks, three right angle bevel gear boxes three-way, 17 flexible couplings, eight linking bars and one motor. 2H Configuration Six Screw jack lift systems with six worm gear screw jacks, three right angle bevel gear boxes four-way, 17 flexible couplings, eight linking bars and one motor. U Configuration Six Screw jack lift systems with six worm gear screw jacks, three right angle bevel gear boxes three-way, 15 flexible couplings, six linking bars and one motor.
Eight Worm Gear Screw Jack Lift Systems Efficiency 80%
H Configuration Six Screw jack lift systems with eight worm gear screw jacks, three right angle bevel gear boxes three-way, 21 flexible couplings, 10 linking bars and one motor. 2H Configuration Six Screw jack lift systems with eight worm gear screw jacks, seven right angle bevel gear boxes three-way, 29 flexible couplings, 14 linking bars and one motor.
High-Quality IPTV Monthly Subscription for $15advik4387
Experience high-quality entertainment with our IPTV monthly subscription for just $15. Access a vast array of live TV channels, movies, and on-demand shows with crystal-clear streaming. Our reliable service ensures smooth, uninterrupted viewing at an unbeatable price. Perfect for those seeking premium content without breaking the bank. Start streaming today!
https://rb.gy/f409dk
Adani Group's Active Interest In Increasing Its Presence in the Cement Manufa...Adani case
Time and again, the business group has taken up new business ventures, each of which has allowed it to expand its horizons further and reach new heights. Even amidst the Adani CBI Investigation, the firm has always focused on improving its cement business.
we are professional Hand wheel manual operated 3 ton worm gear screw jacks lifting devices 300mm for nc precision slitting production line automatic slitter machine in australia manufacturers and suppliers in China.
The document describes 3 ton worm gear screw jacks lifting devices that are 300mm in travel stroke and have a maximum load capacity of 3 tons. The screw jacks are hand wheel operated and are being offered for use in NC precision slitting production lines and automatic slitter machines in Australia. The screw jacks have a high gear ratio of 1/6 and include additional protective piping.
The document advertises lightweight micro-miniature screw jacks from 2.5kn to 10kn lifting force for aluminum can production lines in the UK. It provides details on 4 screw jack models ranging from 2.5kn to 10kn lifting force that are inverted type, have a traveling screw configuration, 100mm lift height, and protective tubing. The screw jacks and other products like gear boxes, couplings, motors, and accessories are suitable for applications that require height adjustment and lifting on conveyor lines.
Jacton Electromechanical Co. produces precision screw jacks and gear lifts for precision straighteners used in the USA. They offer inverted translating worm gear screw jacks in various tonnage ratings from 1 to 10 tons with stroke lengths from 80 to 300mm. These screw jacks feature customized threaded ends, double input shaft worms, and protective tubes to prevent rust. Jacton also produces other screw jack and gear products for industrial machinery.
we are professional 5 ton upright traveling nut machine screw jack, 5t load acme nut screw jack for tunnel freezer top lid lifting in food processing lines in united kingdom manufacturers and suppliers in China.
we are professional Self locking jack screw driven scissor mechanism, worm gear screw jack style scissor lift system, acme screw jack lifting system for scissor lift table in singapore manufacturers and suppliers in China.
The document discusses screw jack lifting systems for scissor lift tables. It describes how ball screw or acme screw jack lifting systems can provide self-locking, precise positioning, uniform lifting speed, synchronization, easy installation and maintenance for scissor lifts. It then provides details about a specific order from a Singapore customer for a screw jack scissor lift table with two screw jacks driven by a 3-phase motor.
we are professional 25kn load capacity machine screw jacks 300mm stroke for continuous pu panel production lines in thailand manufacturers and suppliers in China.
The document describes 25kn load capacity machine screw jacks with 300mm stroke that are used in continuous sandwich panel laminating machines for raising and lowering caterpillar plates. It provides details on two models, the JTW-2.5T-IS-300-H-III-C-PP and JTC25-IS-500-H-I-C-PP, which have load capacities of 2.5 tons and 25kN respectively. It also includes links to the company's website pages on various screw jack products and related parts.
The document discusses a theatre lifting stage jack system for a theatre in France. It includes specifications for a lifting platform that is 15000x10000mm carrying a total load of 2400kN. The system would include 6 screw jacks each with a load capacity of 400kN and 628mm of travel, along with 3 miter gearboxes to connect the screw jacks. An electric motor with a gear reducer is also specified to drive the screw jack system at a speed of 37.5mm/min. Parts for the system like screw jacks, couplings, linking bars, bearings, motors and gearboxes are also referenced.
5 Ton Machine Screw Jacks, 20 Ton Upright Translating Screw Jacks For Lift Different Rotors Of Horizontal Axis Balancing Machines In Russia
This balancing machine is a dynamic soft bearing machine with a horizontal axis.
It has an AC motor with variable speed, which drives the balancing machine through a belt drive system.
The machine can be mounted on a reinforced concrete basement or rigid table for better operating conditions. Self-installing rollers, ac frequency inverter, 5t or 20t screw jacks for for smooth and non-shock rotor stop.
20 Ton Upright Translating Screw Jacks
Model: JT-20T-US-350-L-I-C-N
* Static loading capacity max. 20t, spindle tr64x8
* Upright mounting, translating screw configuration
* Travel stroke 350 mm
* Low worm gear ratio 1/32, 0.25mm per revolution of input shaft
* Double input shaft, no additional accessory
5 Ton Upright Translating Screw Jacks
Model: JT-5T-US-300-L-I-C-N
* Static loading capacity max. 5t, spindle tr38x6
* Upright mounting, translating screw configuration
* Travel stroke 300 mm
* Low worm gear ratio 1/24, 0.25mm per revolution of input shaft
* Double input shaft, no additional accessory
Jacton Electromechanical Co.,Ltd produces 5 ton and 20 ton upright translating screw jacks for lifting different rotors on horizontal axis balancing machines in Russia. The balancing machine has an AC motor with variable speed that drives the machine through a belt system. It can be mounted on a concrete base or table. The screw jacks provide smooth, non-shock stopping of rotors and include features like travel stroke, worm gear ratio, and double input shafts. Other products include various screw jack models, gear boxes, hand wheels, motors, and accessories.
The document discusses a DC 24V geared motor screw jack actuator used for hoisting water gates in agricultural industry in Malaysia. The screw jack has a 10 ton load capacity, 7 foot stroke length, and is powered by a 24V DC motor with a 1/4 gear reduction ratio. It includes protective tubing, bellows boots, and limit switches. The company, Jacton Electromechanical Co., also produces other screw jacks and gearboxes.
UK Live Centre In Electron Beam Welding Machines Height Adjustment By Cast Iron Crank Handle Operated Small Jack Screw Lift Mechanism
UK customers new design, use our micro-miniature screw jacks with hand wheel manual operation for height adjustable live centre in electroc beam welding machines.
Upright Travelling Nut Rotating Screw Jack Model: JTC2.5-UR-300-H-VI-A-HW
1. Jtc2.5 model, lifting screw tr16x4, max. load capacity 2.5kN
2. Upright mounting, travelling nut rotating screw configuration
3. 300mm stroke with high worm gear set ratio, 1mm per turn of hand wheel
4. Plain end fitting 12mm matching top ball bearing
5. Single input worm shaft, left side
6. Accessory: 100mm diam. hand wheel, bronze travelling nut with mounting 6 holes
Denmark spider mould installation 10 ton worm gear jack lift pulling manual operation.
Individually use 10 ton worm gear jack lift, manual operation with 8” (200mm) cast iron hand wheel, with fem with female spherical rod end for 5 ton load applications, pictures as follows. No guided for jacks, use anti-rotation device keyed screw worm gear jack lift pulling for spider mould installation in Denmark.
Model: JT-10T-UK-200-L-IV-C-PP/HW/SN/RE
* 10t screw jacks, max. dynamic load 6.4 tons
* Upright mounting, keyed screw type
* 200mm stroke with low speed ratio 1/32, 0.25mm per turn of hand wheel
* Screw top with thread end M30x2 matching PHS 30 female spherical rod end
* Double input worm shaft
* Accessories: protective tube, 8″ cast iron hand wheel, stop nut, Phs30 rod end.
Pakistan 5 ton travelling nuts rotating screw type screw jacks lifting work platform for raise container
Per screw jack lift systems parts includes 4 pcs 5t travelling nut rotating screw jacks, 2 pcs 1:1 ratio spiral bevel gear boxes, 5 pcs linking bars, 11 pcs couplings, 4 pcs steel plates, 4 pcs flange type pillow block ball bearings, 1 electric motor and 2 sets forward & reversible switches and contractors.
The linking bars, worm shafts of jacks, input & output shafts of gear boxes, output shaft of motor must be are installed and aligned. So all parts center height must be same, jt25 gear boxes are 90 mm, 1.5kw motor is 90 mm, jacks are 61.5 mm matching steel plate thickness 28.5mm, equal to 90 mm. So the main three parts center height is same with 90 mm. Easy to install them inline alignment.
The screw jack lift systems position is 1227.5×1227.5mm, included all safety factors, max. loading capacity 1500kg, travel stroke up to 2068.5 mm, after calculation, lifting screw total length 2282.5 mm. Lifting speed about 415 mm/min. Because lifting screw is very long, assured the whole lift system stable for linear motions, at the top end, extra additional 4 pcs flange type pillow block ball bearings to fix the long lifting screws, and extra additional guiding supports for the lift system.
Rotating jacks model: JTW-5T-UR-2068.5-L-I-C-N
Steel plate model: T28.5-JTW5T
Gear boxes model: JT25-1:1-1450R-1450R-I-LR-B3, JT25-1:1-1450R-1450R-I-LR-O-B3
Flange type ball bearing model: UCF204
Jaw coupling model: FL24/28
Connecting shaft model: D35L322.75, D35L651.5
Electric motor model: TC-90L-4-B3-1.5kw
2 set forward & reversible switches and contractors to control jacks lift system lifting up and down.
The document discusses motorized drive system jackscrews that are used for earth station antenna elevation and azimuth positioning. The jackscrews provide reliable, precise and smooth movement withstanding weather conditions. Key components include self-locking worm gear screw jacks coupled to helical gear motors, limit switches, protective covers, and swivel plates for pivoting antenna positioning. The company provides various jackscrew models and related parts to suit different applications.
Synchronization two jacks lift table, synchronizing four jacks lift table, synchronous lifting six jacks lift table suppliers.
Two Worm Gear Screw Jack Lift Systems Efficiency 95%
Inline Configuration Screw jack lift systems with two worm gear screw jacks, two flexible couplings, one linking bar and one motor. T Configuration Screw jack lift systems with two worm gear screw jacks, five flexible couplings, two linking bars, one right angle bevel gear box three-way and one motor.
Three Worm Gear Screw Jack Lift Systems Efficiency 90%
Inline Configuration Screw jack lift systems with three worm gear screw jacks, five flexible couplings, two linking bar and one motor. T Configuration Screw jack lift systems with three worm gear screw jacks, nine flexible couplings, four linking bars, two right angle bevel gear boxes three-way and one motor.
Four Worm Gear Screw Jack Lift Systems Efficiency 85%
H Configuration Screw jack lift systems with four worm gear screw jacks, three right angle bevel gear boxes three-way, 13 flexible couplings, six linking bars and one motor. U Configuration Screw jack lift systems with four worm gear screw jacks, three right angle bevel gear boxes three-way, 11 flexible couplings, four linking bars and one motor.
Six Worm Gear Screw Jack Lift Systems Efficiency 80%
H Configuration Six Screw jack lift systems with six worm gear screw jacks, three right angle bevel gear boxes three-way, 17 flexible couplings, eight linking bars and one motor. 2H Configuration Six Screw jack lift systems with six worm gear screw jacks, three right angle bevel gear boxes four-way, 17 flexible couplings, eight linking bars and one motor. U Configuration Six Screw jack lift systems with six worm gear screw jacks, three right angle bevel gear boxes three-way, 15 flexible couplings, six linking bars and one motor.
Eight Worm Gear Screw Jack Lift Systems Efficiency 80%
H Configuration Six Screw jack lift systems with eight worm gear screw jacks, three right angle bevel gear boxes three-way, 21 flexible couplings, 10 linking bars and one motor. 2H Configuration Six Screw jack lift systems with eight worm gear screw jacks, seven right angle bevel gear boxes three-way, 29 flexible couplings, 14 linking bars and one motor.
High-Quality IPTV Monthly Subscription for $15advik4387
Experience high-quality entertainment with our IPTV monthly subscription for just $15. Access a vast array of live TV channels, movies, and on-demand shows with crystal-clear streaming. Our reliable service ensures smooth, uninterrupted viewing at an unbeatable price. Perfect for those seeking premium content without breaking the bank. Start streaming today!
https://rb.gy/f409dk
Adani Group's Active Interest In Increasing Its Presence in the Cement Manufa...Adani case
Time and again, the business group has taken up new business ventures, each of which has allowed it to expand its horizons further and reach new heights. Even amidst the Adani CBI Investigation, the firm has always focused on improving its cement business.
[To download this presentation, visit:
https://www.oeconsulting.com.sg/training-presentations]
Unlock the full potential of the MECE (Mutually Exclusive, Collectively Exhaustive) Principle with this comprehensive PowerPoint deck. Designed to enhance your analytical skills and strategic decision-making, this presentation guides you through the fundamental concepts, advanced techniques, and practical applications of the MECE framework, ensuring you can apply it effectively in various business contexts.
The MECE Principle, developed by Barbara Minto, an ex-consultant at McKinsey, is a foundational tool for structured thinking. Minto is also renowned for the Minto Pyramid Principle, which emphasizes the importance of logical structuring in writing and presenting ideas. This presentation includes a clear explanation of the MECE principle and its significance. It offers a detailed exploration of MECE concepts and categories, highlighting how to create mutually exclusive and collectively exhaustive segments. You will learn to combine MECE with other powerful business frameworks like SWOT, Porter's Five Forces, and BCG Matrix. Discover sophisticated methods for applying MECE in complex scenarios and enhancing your problem-solving abilities. The deck also provides a step-by-step guide to performing thorough and structured MECE analyses, ensuring no aspect is overlooked. Insider tips are included to help you avoid common mistakes and optimize your MECE applications.
The presentation features illustrative examples from various industries to show MECE in action, providing practical insights and inspiration. It includes engaging group activities designed for the practice of the MECE principle, fostering collaborative learning and application. Key takeaways and success factors for mastering the MECE principle and applying it in your professional work are also covered.
The MECE Principle presentation is meticulously designed to provide you with all the tools and knowledge you need to master the MECE principle. Whether you're a business analyst, manager, or strategist, this presentation will empower you to deliver insightful and actionable analysis, drive better decision-making, and achieve outstanding results.
LEARNING OBJECTIVES:
1. Understand the MECE Principle
2. Improve Analytical Skills
3. Apply MECE Framework
4. Enhance Decision-Making
5. Optimize Resource Allocation
6. Facilitate Strategic Planning
DPBOSS | KALYAN MAIN MARKET FAST MATKA RESULT KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | МАТКА СОМ | MATKA PANA JODI TODAY | BATTA SATKA MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA MATKA NUMBER FIX MATKANUMBER FIX SATTAMATKA FIXMATKANUMBER SATTA MATKA ALL SATTA MATKA FREE GAME KALYAN MATKA TIPS KAPIL MATKA GAME SATTA MATKA KALYAN GAME DAILY FREE 4 ANK ALL MARKET PUBLIC SEVA WEBSITE FIX FIX MATKA NUMBER INDIA.S NO1 WEBSITE TTA FIX FIX MATKA GURU INDIA MATKA KALYAN CHART MATKA GUESSING KALYAN FIX OPEN FINAL 3 ANK SATTAMATKA143 GUESSING SATTA BATTA MATKA FIX NUMBER TODAY WAPKA FIX AAPKA FIX FIX FIX FIX SATTA GURU NUMBER SATTA MATKA ΜΑΤΚΑ143 SATTA SATTA SATTA MATKA SATTAMATKA1438 FIX МАТКА MATKA BOSS SATTA LIVE ЗМАТКА 143 FIX FIX FIX KALYAN JODI MATKA KALYAN FIX FIX WAP MATKA BOSS440 SATTA MATKA FIX FIX MATKA NUMBER SATTA MATKA FIXMATKANUMBER FIX MATKA MATKA RESULT FIX MATKA NUMBER FREE DAILY FIX MATKA NUMBER FIX FIX MATKA JODI SATTA MATKA FIX ANK MATKA ANK FIX KALYAN MUMBAI ΜΑΤΚΑ NUMBER
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
SATTA MATKA SATTA FAST RESULT KALYAN TOP MATKA RESULT KALYAN SATTA MATKA FAST RESULT MILAN RATAN RAJDHANI MAIN BAZAR MATKA FAST TIPS RESULT MATKA CHART JODI CHART PANEL CHART FREE FIX GAME SATTAMATKA ! MATKA MOBI SATTA 143 spboss.in TOP NO1 RESULT FULL RATE MATKA ONLINE GAME PLAY BY APP SPBOSS
KALYAN CHART SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA
L'indice de performance des ports à conteneurs de l'année 2023SPATPortToamasina
Une évaluation comparable de la performance basée sur le temps d'escale des navires
L'objectif de l'ICPP est d'identifier les domaines d'amélioration qui peuvent en fin de compte bénéficier à toutes les parties concernées, des compagnies maritimes aux gouvernements nationaux en passant par les consommateurs. Il est conçu pour servir de point de référence aux principaux acteurs de l'économie mondiale, notamment les autorités et les opérateurs portuaires, les gouvernements nationaux, les organisations supranationales, les agences de développement, les divers intérêts maritimes et d'autres acteurs publics et privés du commerce, de la logistique et des services de la chaîne d'approvisionnement.
Le développement de l'ICPP repose sur le temps total passé par les porte-conteneurs dans les ports, de la manière expliquée dans les sections suivantes du rapport, et comme dans les itérations précédentes de l'ICPP. Cette quatrième itération utilise des données pour l'année civile complète 2023. Elle poursuit le changement introduit l'année dernière en n'incluant que les ports qui ont eu un minimum de 24 escales valides au cours de la période de 12 mois de l'étude. Le nombre de ports inclus dans l'ICPP 2023 est de 405.
Comme dans les éditions précédentes de l'ICPP, la production du classement fait appel à deux approches méthodologiques différentes : une approche administrative, ou technique, une méthodologie pragmatique reflétant les connaissances et le jugement des experts ; et une approche statistique, utilisant l'analyse factorielle (AF), ou plus précisément la factorisation matricielle. L'utilisation de ces deux approches vise à garantir que le classement des performances des ports à conteneurs reflète le plus fidèlement possible les performances réelles des ports, tout en étant statistiquement robuste.
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART INDIA MATKA KALYAN SATTA MATKA 420 INDIAN MATKA SATTA KING MATKA FIX JODI FIX FIX FIX SATTA NAMBAR MATKA INDIA SATTA BATTA
SATTA MATKA DPBOSS KALYAN MATKA RESULTS KALYAN CHART KALYAN MATKA MATKA RESULT KALYAN MATKA TIPS SATTA MATKA MATKA COM MATKA PANA JODI TODAY BATTA SATKA MATKA PATTI JODI NUMBER MATKA RESULTS MATKA CHART MATKA JODI SATTA COM INDIA SATTA MATKA MATKA TIPS MATKA WAPKA ALL MATKA RESULT LIVE ONLINE MATKA RESULT KALYAN MATKA RESULT DPBOSS MATKA 143 MAIN MATKA KALYAN MATKA RESULTS KALYAN CHART
Easy Earnings Through Refer and Earn Apps Without KYC.pptxFx Lotus
Learn how to make extra money with refer and earn apps that don’t require KYC. Find out the advantages, top apps, and strategies to boost your earnings quickly and easily.
japanese language course in delhi near meheyfairies7
Next is the Nihon Language Academy in East Delhi, renowned for its comprehensive curriculum and interactive teaching methods. They boast a faculty of experienced educators with a blend of both Indian and Japanese nationals. The academy provides extensive support for JLPT exam preparation along with personalized tutoring sessions if needed. Nihon Language Academy also arranges exchange programs with partner institutes in Japan, which provides students an opportunity to experience Japanese culture and language first-hand.
➒➌➎➏➑➐➋➑➐➐ Satta Matka Dpboss Matka Guessing Indian Matka KALYAN MATKA | MATKA RESULT | KALYAN MATKA TIPS | SATTA MATKA | MATKA.COM | MATKA PANA JODI TODAY | BATTA SATKA | MATKA PATTI JODI NUMBER | MATKA RESULTS | MATKA CHART | MATKA JODI | SATTA COM | FULL RATE GAME | MATKA GAME | MATKA WAPKA | ALL MATKA RESULT LIVE ONLINE | MATKA RESULT | KALYAN MATKA RESULT | DPBOSS MATKA 143 | MAIN MATKA
AI Transformation Playbook: Thinking AI-First for Your BusinessArijit Dutta
I dive into how businesses can stay competitive by integrating AI into their core processes. From identifying the right approach to building collaborative teams and recognizing common pitfalls, this guide has got you covered. AI transformation is a journey, and this playbook is here to help you navigate it successfully.
AI Transformation Playbook: Thinking AI-First for Your Business
1 1 ratio 90 degree bevel gear assembly, gear drive two inputs one output, alloy body angle gearbox, gearbox right angle 1 inch shaft suppliers, manufacturers
1. JTP Series Miter Gearbox
Jacton Electromechanical Co.,Ltd
1
http://www.screw-jack.com
2. Contents
General information ------------------------------------------------------------------------------- 3
Specifications --------------------------------------------------------------------------------------- 4
Selection Guide
1. Gearbox Series --------------------------------------------------------------------------------------- 5
2. Model -------------------------------------------------------------------------------------------------- 5
3. Gear Ratio--------------------------------------------------------------------------------------------- 5
4. Input & Output RPM ---------------------------------------------------------------------------------- 5
5. Shaft Arrangements And Direction Of Shaft Rotating ---------------------------------------------- 5-6
6. Mounting Position ------------------------------------------------------------------------------------- 6
Selection Examples -------------------------------------------------------------------------------- 7
Dimensions
1. Model JTP54 ------------------------------------------------------------------------------------------ 8
2. Model JTP90 ------------------------------------------------------------------------------------------ 9-10
3. Model JTP110 ---------------------------------------------------------------------------------------- 11-12
4. Model JTP140 ---------------------------------------------------------------------------------------- 13-14
5. Model JTP170 ---------------------------------------------------------------------------------------- 15-16
6. Model JTP210 ---------------------------------------------------------------------------------------- 17-18
7. Model JTP240 ---------------------------------------------------------------------------------------- 19-20
8. Model JTP280 ---------------------------------------------------------------------------------------- 21-22
Application Example ------------------------------------------------------------------------------ 23
Operation Manual ---------------------------------------------------------------------------------- 24-25
Frequently Asked Questions ------------------------------------------------------------------- 26
Company History ----------------------------------------------------------------------------------- 27
Contact Us -------------------------------------------------------------------------------------------- 28
Jacton Electromechanical Co.,Ltd
2
http://www.screw-jack.com
3. General Information
Input power from 0.1 Kw to 157 Kw. Transmission torque from 9 Nm to 1299 Nm. 1:1 ratio, 1.5:1, 2:1,
3:1, 4:1, 5:1 gear reduction ratios, custom speed increaser 1:1.5, 1:2, 1:3 gear increasing ratio. Input
and output speed from 10 rpm to 2000 rpm, custom higher speed 3000 rpm. High efficiency from
95% to 98%. Input and output shaft diameter from 11 mm to 60 mm. 12 types input and output shaft
arrangements and rotation directions, shafts can be rotated clockwise and counterclockwise rotation
directions. Solid shaft, hollow shaft and flange adapter are suitable, custom multiple spine keys.
Horizontal mounting, overhung mounting or wall mounting are suitable. Two way gear box, three way
gear box, four way gear box and five way gear box are suitable. Low backlash, quiet running, low
temperature, high torque features.
JTP series cubic miter gearbox structures include housing, miter gear, drive shaft bearing, shaft
sealing ring, flange bearing, pinion shaft, output shaft, output shaft bearing, bearing cover.
Miter Gear
High purity rugged alloy steel material; Carburizing process, case hardened in pairs for intersecting
shafts; Low noise with grinded spiral teeth; High torque with milled teeth; High rigidity and wear
resistance
Pinion Shaft and Output Shaft
Hardened and tempered alloy steel material; Hanging heavy load capacity; With key and keyway;
Customized stainless steel, chromium coated or other corrosion resistance painting; Customized
spline shaft,shaft without key and keyway
Housing
High rigidity cast iron; Customized stainless steel, galvanic coating or corrosion resistance painting.
Jacton Electromechanical Co.,Ltd
3
http://www.screw-jack.com
5. Selection Guide
JTP – 90 –
1
2
1:1 – 1500R
3
4
– 1500R
5
–
B – B3
6
7
1. Gearbox Series
JT: “Jacton” brand
P: P series miter gearbox
2. Model
Model
54
90
110
140
Gearbox Sizes
54x54x54mm
90x90x90mm
110x110x110mm
140x140x140mm
Model
170
210
240
280
Gearbox Sizes
170x170x170mm
210x210x210mm
240x240x240mm
280x280x280mm
Before selecting gearbox frame no., please check corresponding model’s specifications
3. Gear Ratio
Model
90
110
140
170
210
240
280
1:1
1:1
1:1
1:1
1:1
1:1
1:1
1:1
2:1
1.5:1
1.5:1
1.5:1
1.5:1
1.5:1
1.5:1
1.5:1
3:1
2:1
2:1
2:1
2:1
2:1
2:1
2:1
3:1
3:1
3:1
3:1
3:1
3:1
3:1
4:1
4:1
4:1
4:1
4:1
4:1
4:1
5:1
Gear
54
5:1
5:1
5:1
5:1
5:1
5:1
Ratio
4 & 5. Input & Output RPM
Ratios
1:1
1.5:1
2:1
3:1
4:1
5:1
input Rpm
output Rpm
output Rpm
output Rpm
output Rpm
output Rpm
output Rpm
2000
2000
1333
1000
667
500
400
1500
1500
1000
750
500
375
300
1000
1000
667
500
333
250
200
750
750
500
375
250
187.5
150
500
500
333
250
167
125
100
250
250
167
125
83
62.5
50
50
50
33
25
17
12.5
10
6. Shaft Arrangements And Direction Of Shaft Rotating
Note: input shaft and output shafts can be rotated in both forward and reverse directions.
A: 2
way
gearbox,
input
shaft
clockwise
rotation
direction,
right
side
output
shaft
anticlockwise rotation direction.
B: 2 way gearbox, input shaft clockwise rotation direction, right side output shaft clockwise rotation
direction.
C: 2 way gearbox, input shaft clockwise rotation direction, left side output shaft clockwise rotation
direction.
D: 2 way gearbox, input shaft clockwise rotation direction, left side output shaft anticlockwise rotation
direction.
Jacton Electromechanical Co.,Ltd
5
http://www.screw-jack.com
6. E: 3 way gearbox, input shaft clockwise rotation direction, two output shaft clockwise rotation direction.
F: 3 way gearbox, input shaft clockwise rotation direction, two output shaft anticlockwise rotation direction.
G: 3 way gearbox, input shaft clockwise rotation direction, left side output shaft anticlockwise rotation
direction, inline output shaft anticlockwise rotation direction.
H: 3 way gearbox, input shaft clockwise rotation direction, left side output shaft clockwise rotation direction,
inline output shaft anticlockwise rotation direction.
L: 3 way gearbox, input shaft clockwise rotation direction, right side output shaft anticlockwise rotation
direction, inline output shaft anticlockwise rotation direction.
M: 3 way gearbox, input shaft clockwise rotation direction, right side output shaft clockwise rotation
direction, inline output shaft anticlockwise rotation direction.
N: 4 way gearbox, input shaft clockwise rotation direction, inline output shaft anticlockwise, two output shaft
anticlockwise rotation direction.
P: 4 way gearbox, input shaft clockwise rotation direction, inline output shaft anticlockwise, two output shaft
clockwise rotation direction.
7. Mounting Position
B3, C3, V3: horizontal mounting position
B5, C5, V5: overhung mounting position
B5, C5, V5: side wall mounting position
Jacton Electromechanical Co.,Ltd
6
http://www.screw-jack.com
7. Selection Examples
Load characteristics of each gearbox 50Nm, moderate load, working 8 hours/day continuously:
i.e: driven machine factor f1=1.25, input speed=1000Rpm, ratio i=1:1
Calculated with the following formula, the torque required by each gearbox is
Each gearbox required torque=50 x 1.25=62.5Nm
No.1 Gearbox:
No.1 gearbox carries its own torque of 62.5Nm and at the same time transmit torques to No.2 and
No.3 gearboxes, so the total load is 62.5Nm+62.5Nm+62.5Nm=187.5Nm
Check above 6th page specifications, JTP170 gearbox is selected
No.2 Gearbox:
Besides its own torque, No.2 gearbox has to transmit torque to No.3 gearbox, so the total load is:
62.5Nm+62.5Nm=125Nm
Check above 6th page specifications, JTP140 gearbox is selected
No.3 Gearbox:
As only load C exists, torque large than 62.5Nm is acceptable.
Check above 5th page specifications, JTP110 gearbox is selected
Notes:
1. When i≠1, please make a choice of the input shaft. When pinion shaft acts as the input shaft, the
machine is a gear reducer. When output shaft acts as the input shaft, it is an gear inceaser. The
positions of the two shafts can not be changed once the mounting positions and dimensions are
fixed.
2. When several gearboxes are connected for output, load capacity of the line shafting should be
checked.
Jacton Electromechanical Co.,Ltd
7
http://www.screw-jack.com
9. Model JTP90 Solid Shaft Input and Solid Shaft Output Drawing
Model JTP90 Solid Shaft Input and Hollow Shaft Output Drawing
Jacton Electromechanical Co.,Ltd
9
http://www.screw-jack.com
10. Model JTP90 Flange Input and Solid Shaft Output Drawing
Model JTP90 Flange Input and Hollow Shaft Output Drawing
Jacton Electromechanical Co.,Ltd
10
http://www.screw-jack.com
11. Model JTP110 Solid Shaft Input and Solid Shaft Output Drawing
Model JTP110 Solid Shaft Input and Hollow Shaft Output Drawing
Jacton Electromechanical Co.,Ltd
11
http://www.screw-jack.com
12. Model JTP110 Flange Input and Solid Shaft Output Drawing
Model JTP110 Flange Input and Hollow Shaft Output Drawing
Jacton Electromechanical Co.,Ltd
12
http://www.screw-jack.com
13. Model JTP140 Solid Shaft Input and Solid Shaft Output Drawing
Model JTP140 Solid Shaft Input and Hollow Shaft Output Drawing
Jacton Electromechanical Co.,Ltd
13
http://www.screw-jack.com
14. Model JTP140 Flange Input and Solid Shaft Output Drawing
Model JTP140 Flange Input and Hollow Shaft Output Drawing
Jacton Electromechanical Co.,Ltd
14
http://www.screw-jack.com
15. Model JTP170 Solid Shaft Input and Solid Shaft Output Drawing
Model JTP170 Solid Shaft Input and Hollow Shaft Output Drawing
Jacton Electromechanical Co.,Ltd
15
http://www.screw-jack.com
16. Model JTP170 Flange Input and Solid Shaft Output Drawing
Model JTP170 Flange Input and Hollow Shaft Output Drawing
Jacton Electromechanical Co.,Ltd
16
http://www.screw-jack.com
17. Model JTP210 Solid Shaft Input and Solid Shaft Output Drawing
Model JTP210 Solid Shaft Input and Hollow Shaft Output Drawing
Jacton Electromechanical Co.,Ltd
17
http://www.screw-jack.com
18. Model JTP210 Flange Input and Solid Shaft Output Drawing
Model JTP210 Flange Input and Hollow Shaft Output Drawing
Jacton Electromechanical Co.,Ltd
18
http://www.screw-jack.com
19. Model JTP240 Solid Shaft Input and Solid Shaft Output Drawing
Model JTP240 Solid Shaft Input and Hollow Shaft Output Drawing
Jacton Electromechanical Co.,Ltd
19
http://www.screw-jack.com
20. Model JTP240 Flange Input and Solid Shaft Output Drawing
Model JTP240 Flange Input and Hollow Shaft Output Drawing
Jacton Electromechanical Co.,Ltd
20
http://www.screw-jack.com
21. Model JTP280 Solid Shaft Input and Solid Shaft Output Drawing
Model JTP280 Solid Shaft Input and Hollow Shaft Output Drawing
Jacton Electromechanical Co.,Ltd
21
http://www.screw-jack.com
22. Model JTP280 Flange Input and Solid Shaft Output Drawing
Model JTP280 Flange Input and Hollow Shaft Output Drawing
Jacton Electromechanical Co.,Ltd
22
http://www.screw-jack.com
23. Application Examples
JTP Series Miter Gearbox is widely applied in screw jack lift system, printing press, plastic extruder,
sewage auger, bonding equipment, metering auger, sewage agitator, newspaper conveyor, bottling
equipment, material handling, web finishing, paper conveying, conveyor, cardboard box equipment,
packaging, vertical pump drive, sand spreader, residential mower, snow blower, mining equipment, crane,
agricultural, grain wagon, harvester, forage harvester, manure spreader, fertilizer spreader and sewage
conveyor etc.
Jacton Electromechanical Co.,Ltd
23
http://www.screw-jack.com
24. Operation Manual
Please read this entire document prior to operating the miter gearbox. Miter gearbox failure or injury
to operators may be caused by improper installation, operation or maintenance.
Installation
Miter gearboxs must be mounted on a rigid, structurally sound baseplate. Ensure that miter gearbox
mounting pads rest evenly on the baseplate. The use of shims may be required to avoid housing
distortion which could alter the gear mesh or cause premature bearing failure.
The miter gearbox may be driven by direct coupling, flexible coupling, or V-belt drive. Couplers
should require only a light force to install. The driveline must be accurately aligned within the
equipment manufacturer's requirements to limit operating loads and minimize thrust loads on the
miter gearbox shaft. V-belt drives must be mounted close to the housing to minimize excessive
overhung loading which could result in early bearing or shaft failures. Sheaves must fit correctly. At
installation, a tight forced fit could move the shaft from its normal position and cause internal damage.
A loose fit could induce excessive vibration during operation and cause shaft damage or breakage.
Warning
When mounting the miter gearbox, the buyer is responsible to properly determine the quality or grade
of fastener, thread engagement, load carrying capacity, and torque requirements.
Warning
The buyer is responsible to provide protective shields over all external rotating parts, couplers, or
shaft extensions mounted on or with the miter gearbox. Protective clothing must be worn when
installing or maintaining the miter gearbox and operating system.
Initial operation should be carried out under no-load conditions. Before applying power to the miter
gearbox installation, review the following:
1. Check tightness of mounting bolts.
2. Check for proper oil level in miter gearbox.
3. Be certain that tools, debris, etc., are clear from rotating parts.
4. Rotate shafts by hand. If they do not rotate freely, check for uneven mounting, coupling
misalignment or excessive belt tension.
If all tests are satisfactory, make connections to shafts, ensure that all safety devices are in place,
and begin operation.
Lubrication
All miter gearboxes are factory tested prior to shipment. They include the correct amount of oil unless
specified by the customer to be shipped dry. Shaft bearings are splash lubricated and partially
submerged in oil when the miter gearbox is mounted horizontally. After installation, remove the
dipstick and verify correct oil level. If no dipstick is provided, determine level by any appropriate
method. In general, the oil level should be approximately half the depth of the miter gearbox (to the
parting line) for horizontal mounting, or to the shaft centerlines, if mounted other than horizontally.
Caution
Prior to operation, make sure the miter gearbox contains the correct amount of oil. If under-filled or
over-filled, damage to the miter gearbox or injury to personnel may result.
Jacton Electromechanical Co.,Ltd
24
http://www.screw-jack.com
25. Approved Lubricants:
For miter gearboxs operating in an ambient temp of –20 Deg. C and +85 Deg. C
JTP series miter gearbox lubricant using liquid gear oil.
When low speed less than 100Rpm, optional grease lubricant
Caution
Donot combine synthetic with non-synthetic oils in the miter gearbox.
Maintenance
Warning
Disconnect power prior to any maintenance and do not bypass or inactivate any safety or protective
device. Lock out and tag the power supply to prevent unexpected application of power.
Routinely inspect mounting bolts, couplers,or other power transmitting devices to ensure all parts are
firmly anchored.Keep shafts and vent plugs (when included) clean to prevent foreign particles from
entering seals or housing. Inspect daily for any oil leaks and any unusual noises. Inspect weekly for
end play in shafts. Inspect belt drive tension after the first ten hours of operation and periodically
thereafter.
Check the oil level every 24 hours of operation. In the beginning to change the oil when the miter
gearbox has been in service for two weeks or 100 ~ 200 hours. Routine oil change intervals will vary
for each particular installation depending on the severity of the environment. Normal changes should
occur half ~ 1year or 1000 ~ 2000 hours of operation. The longest life at continuous service will be
realized when the oil temperature does not exceed +85 deg. C. For oil substitutions, or for high input
speeds, contact Jacton engineers.
Warning
Donot change or add oil while the miter gearbox is running. Damage to the miter gearbox or injury to
personnel may result. The miter gearbox housing, oil, plugs, and associated components may reach
high temperatures and cause severe burns. Use extreme care when servicing the miter gearbox.
Trouble Shooting
Jacton Electromechanical Co.,Ltd
25
http://www.screw-jack.com
26. Frequently Asked Questions
How Do I Know Which Shaft Of Miter gearbox Is As Input Shaft?
When using a 1:1 ratio gearbox ,it does not matter which shaft is used as the input shaft. Normally,
X-shaft is input shaft, Y-shaft is output shaft. For other reduction gear ratios input shaft is same as 1:1
ratio gearbox, but for increasing gear ratios input shaft, which is Y-shaft is input shaft, X-shaft is
output shaft.
Can I Use Miter gearbox As Speed Increaser?
All miter gearbox can be used as speed increaser, by inputting on the output side of the gearbox,
however it is important to check whether the miter gearbox can handle the power and speed. When
using as an increaser, the input speed does not exceed the specifications recommended maximum
speed. Special gearbox is available where the pinion can be put on the through shaft so that two
output shaft increase the speed.
Are Miter gearboxes Supplied Filled With Gear Oil?
Yes, all miter gearboxes are filled gear oil prior to shipment, customers can install them and use them
directly. Note: for low speed applications (100 rpm input speed and below) miter gearboxes may be
recommended to have grease lubrication.
How Often Should I Change Gear Oil In The Miter gearbox?
Check the gear oil level every 24 hours of operation. In the beginning to change the gear oil when the
miter gearbox has been in service for two weeks or 100 ~ 200 hours. Routine oil change intervals will
vary for each particular installation depending on the severity of the environment. Normal changes
should occur half ~ 1year or 1000 ~ 2000 hours of operation. The longest life at continuous service
will be realized when the oil temperature does not exceed +85 deg. C. For oil substitutions, or for high
input speeds, contact Jacton engineers.
How Transmission Efficiency Of Miter gearbox?
The miter gearbox transmission efficiency up to 98%
Jacton Electromechanical Co.,Ltd
26
http://www.screw-jack.com
27. Company History
In 1997, Established Jacton Hardware Fabrication Plant, mainly processing kinds of hardware
following customers requirements. Occupied 500 square meters.
In 2000, Established domestic sales department, started to develop local market, mainly processing
gear transmission parts such as worm and worm gear, acme threads screw, square threads screw
and acme lead screw nut. Meanwhile, sales also sell straight miter gear and spiral miter gears for
customers.
In 2002, According to some regular customers of steel plants and machines manufacturers, which
used Taiwan screw jacks and miter gearboxes, due to long delivery and high price, would affect the
normal operations. Jacton Hardware Fabrication Plant started to processing JT acme screw jack and
JT miter gearbox following above customers samples.
In 2003, Established engineering department, research and development others models of JT acme
screw jack and JT miter gearbox, and draw some factory production drawings and local sales'
customers drawing with 2d autocad software.
In 2005, According to local market demands, Jacton Hardware Fabrication Plant is committed to
research and development JB/T8809-1998 standard JTW worm screw jack, JTM machine screw
jack, JTB ball screw jack and JTP cubic body miter gearbox.
In 2006, Because of local markets fiercely competitive. Established Hongkong office-Jacton
International Limited with own US dollars and EURO account. Established international sales
department, focused on overseas markets. Meanwhile, "JACTON" as company only brand.
In 2008, According to intl sales market report, cubic body screw jacks and another type cubic body
miter gearboxes are very popular in Europe and America markets. After managements meetings, we
started to develop JTC cubic screw jack, JTS high speed miter gear jack, JTV cubic body miter
gearbox and JTA corrosion resistance aluminium body miter gearbox.
In 2009, Jacton Hardware Fabrication Plant extension, occupied 5000 square meters. Company
improves the processes and products through technology investment, brings in advanced
technology, production and testing equipment.
In 2010, Jacton Hardware Fabrication Plant Passed ISO9001:2008 quality management system, we
are strictly implement the work flow of ISO9001:2008 certifications, which ensures oversea and local
customers are satisfaction with our screw jacks and miter gearboxes and fast delivery time.
In 2012, In order to facilitating management, according to management decisions, sales department
and design department moved to Taibao business building. Meanwhile, Jacton Hardware Fabrication
Plant changed to be Dongguan Jacton Electromechanical Co.,Ltd.
Jacton Electromechanical Co.,Ltd
27
http://www.screw-jack.com
28. Contact Us
Jacton Electromechanical Co.,Ltd
Jacton Electromechanical Co.,Ltd
(Head Quarters)
(Sales Dept. & Design Dept.)
1&2 Floors, Building F, Baisheng Industrial
1118, Taibao Business Building, No.1
Areas,
Langwei Rd, Xinan, Changan, Dongguan,
No.34,
Yongjun
Road,
Datang,
Dalingshan, Dongguan, Guangdong, China
Guangdong, China
Phone: 86 769 81585810
Phone: 86 769 81585852
Mobile: 86 189 25569548
Fax:
Jacton International Limited
Contact Us
(Hong Kong Branch)
General Enquiries: sales@screw-jack.com
86 769 81620195
jactonjack@gmail.com
Office 17,9/F.,Tower A,New Mandarin
Online Skype:
jactonjack (Warren)
Tsimshatsui,Kowloon,Hongkong
Online Skype:
jactongearbox (Abby)
Tel: 852-2793-5511
Website:
http://www.screw-jack.com
Fax:852-3590-2333
Urgently required, please directly make a call
Plaza,No.14,Science
Museum
Road,
to Warren +86 13532830851
Jacton Electromechanical Co.,Ltd
28
http://www.screw-jack.com