The SMJ1890 is a cellular jammer that can block cellular networks and standards worldwide. It uses DDS and PLL technology to jam up to 100W per band across 4 bands, jamming up to 60 channels within each band. It has an adjustable output power between 5W and 100W and can jam both downlink and uplink signals simultaneously. The jammer transmits noise to block cellular communication between phones and towers within its radius.
1. PHANTOM TECHNOLOGIES LTD.
68 AMAL ST., PETAH-TIKVA, ISRAEL
TEL. +972-3-9215720 FAX. +972-3-9215434
Web-Site: www.phantom.co.il
Smart Cellular Jammer - Technical Data
High Power
Up to 100W Output Power/Band
Model SMJ1890
Cabinet enclosure installation
General Description
The SMJ1890 was designed for blocking GSM cellular network and
all kinds of cellular standards in the world.
The SMJ1890 is using state-of-the art technology for maximum
performance.
The unit is controlled by a Microprocessor for PLL & DDS
programming.
The unit was designed with the capabilities of jamming specific
channels inside the cellular networks bands only.
Jamming of downlink & uplink is possible at the same time.
The unit is based on a DDS that can be programmed to transmit up
to 36 channels per band, by fast sweeping between each other.
Channel bandwidth is 250 KHz.
The user can control output power of each band via a programmable
attenuator.
Output power can vary from 5W up to 100W within 1dB steps.
The SMJ1890 transmits noise signal which cuts-off all cellular
communication between mobile phones and cellular base stations.
The jamming radius depends on the signal strength in a given area.
All cellular mobiles in vicinity to the SMJ1890 will be totally
BLOCKED and will not be able to receive or dial outgoing calls.
2. PHANTOM TECHNOLOGIES LTD.
68 AMAL ST., PETAH-TIKVA, ISRAEL
TEL. +972-3-9215720 FAX. +972-3-9215434
Web-Site: www.phantom.co.il
Jamming up to 60 channels inside the cellular band
Easy to use programming interface.
Programmable output power for each band. High VSWR
protection
Built-in filter for minimum RF interference outside the jamming
bands
Installation in IP54/64 enclosure cabinets suited for
continuous outdoor operation, with protection against dust
and precipitations.
Applications
- Prisons
- Military Units
- Special Police Units
- Governmental Facilities
3. PHANTOM TECHNOLOGIES LTD.
68 AMAL ST., PETAH-TIKVA, ISRAEL
TEL. +972-3-9215720 FAX. +972-3-9215434
Web-Site: www.phantom.co.il
Technical Specifications
RF Characteristics
Max. Output Power per Band 100W
Min. Output Power per Band 5W
Output Power Control Steps 1dB
Internal Modulation FM Hopping Frequency
Signal Source DDS & PLL synthesized
Power Supply 12/28VDC regulated or 110/220VAC
Modules Per Unit 4 bands
Programming Control RS232
Antenna External - Directional 14 dBi gain
or Omni-Directional
Antenna outputs includes VSWR protection
Jamming Frequency Bands 4 bands from the following
Frequency Bands 851 - 866MHz.
869 - 894MHz
943,5 - 960MHz
1.805 - 1.880MHz
1.890 - 1.895MHz
2.110 - 2.165MHz
2.620 - 2.699MHz
Channel Band Width 250KHz
Channel Spacing 200KHz
Air Interface Standards Digital: iDEN, TDMA, CDMA, GSM, UMTS
Analog: AMPS, MNT, N-AMPS, TACS
Maximum Sweeping
Channels per Band
60
Physical Data
Dimensions IP54/64 enclosure – 600 X 600 X 250mm
Protected from dust and rain
Weight Approx. 20Kg
Environment of operation
Operating Temp. -10ºC - +65ºC
Humidity 5% - 80%
Optional Accessories
Rechargeable Battery 24VDC / 70AH
Control Cable Via PC LAN or RS232 – 9 pins CABLE
*Specifications are subject to change without prior notice
Rev. 002