Gigaeye ip camera port forwarding guide

1. Gigaeye IP camera port forwarding guide
Copyright © 2009-2013 Gigaeye.com. All Rights Reserved

2. The initial thing you need to confirm is each IP camera has been distributed an unique IP
address and an unique port according to the IP address.
Gigaeye.com

3. Step 1:Access the router's setup page by entering its LAN-side IP address in the
address field of your web browser. (192.168.0.254, in this example.) The router setup
page should appear. You may need to enter an administrator ID and password in
order to access the setup page.
Step 2:Click on the link which opens the Port Forwarding setup page. This page may
be located within an "Advanced Setup", "Address Translation", or similarly named
page.
Step 3:Once you have opened the router's Port Forwarding setup page, you should
see a number of data fields, such as "Port", "IP address" or "Destination", etc.
Gigaeye.com

4. Here you will enter the port numbers of messages you want to be forwarded, and the
IP addresses of your network devices which you want those messages forwarded to..
In this example:
Network Camera 1
IP address: 192.168.0.10
Port: 6001 (used to access the camera's integrated web server)
Network Camera 2
IP address: 192.168.0.20
Port: 6002 (used to access the camera's integrated web server)
Gigaeye.com

5. Step 4:Click "Save" or a similarly titled button to save your Port Forwarding settings.
Step 5:Test your settings.
To access a device over the internet, enter your router's static IP address followed by the
port number of the device. In this example, by entering:
http://111.222.123.1:6001 in a web browser, you would see the top page of Network
Camera 1.
The instructions provided here approximate and explain only the basic procedures for
configuring IP addresses and Port Forwarding. You can also contact
support@gigaeye.com if you have any detailed problem about port forwarding.
Gigaeye.com

6. For more information, please check the
official site
http://www.gigaeye.com/
Thank you!
Gigaeye.com